Cordless Threaded Rod Cutter Restoration | National EZ3560
HTML-код
- Опубликовано: 25 авг 2024
- I found this tool from Japan recycle shop in my city. It is an old model threaded rod cutter made by National, Japan. The tool is working fine except the battery. I convert the Nicd battery to Li-ion battery.
I use 6 cells of 18650 and BMS 3S60A to build new Li-ion battery pack 12.6V 6Ah.
* BMS 3S60A is a battery management system for 12V battery pack
- Charging voltage: 12.6V - 13.6V
- Continuous discharge current (upper limit): 60A
- Continuous charging current (upper limit): 10A
- Balanced version: suitable for electric drills with starting current below 120A and power below 260W, with balanced charging function
* Lithium-ion battery cell
- Brand model: LG INR18650HG2
- Standard capacity: 2800- 3000mAh
- Rated voltage: 3.6V
- Charging voltage: 4.2±0.05V
- Maximum continuous discharge current: 20A
- Discharge cut-off voltage: 2.5V
- Weight: Max.47.0g
- Size: Max.18.2×65.2 mm
- Charge and discharge times: 500 times
I hope you find this video useful and enjoy it!
Furthermore, I am happy to receive feedback, suggestions to improve myself.
!!! I'm sorry for the mistake if I did in this video !!!
Thank you very much for choosing to watch my video!
Have a nice day
Gear Show Хобби
Very cool! I didn't even know such a tool existed, scary powerful.
The same to you, I just know it too.
@@gear_show 🤣
Always a pleasure to watch you work, well done
Thank you!
3:13 The washers are installed like a Sparky BPR241E punch.
Wow! Nice restoration. Cuts like a butter.
Great job, thank you brother. You are so talented
Thank you for visit :)
Nice!
Exept at 16:40 i wouldnt leave the old NiCd cell there, because i think it can leak during time and maybe damage something, but im not sure.
Yes ! The ACID ! Could LEAK !! QUITE ! SERVELY ! IN ! YOUR ! BACKSIDE !!
Отличная работа! Привет из Ташкента 👋😊.
Спасибо😊😊
Комментарий в поддержку канала и ролика, а также труда мастера.
Really cool! Well done 👌
Thank you!
Hey! I need that phonograph player cover! Ha! I am sad that the only Tower Records in the World isnt next to me! like it used to be... Awesome videos as usual. Youre an artist.
I'm glad you like, thank you!
Nice job 👍
Thanks for the visit
Brilliant work 👍 love the battery pack build as usual.
Good job 👍👍👍Thanks for sharing
Thank you too
Fine work 💪👍
Thanks ✌
Finally, welcome back Bro gear show ✌️
Meily, thank you for waiting!
Amazing video again. Well done 👍
Thanks again!
Very nice good job!!!!
Amazing video as always .have a new camera video's image quality more good
Date on label nice idea for uses days (or for limited warrantys)
Thank you Master
I'm glad you like my idea, thank you for visit this channel :)
good job👍👍👍😘
Thanks 😘
Very cool Mate ! 👍👍👍
Thank you!
Wow, that motor got a lot of power.
lot of gearing
Nice job
But what's about the connections of battery back
You've just connected B- & B+
whats about B1 & B2 ???
I connected B1 & B2 all ready ruclips.net/video/aaRnrL44pUo/видео.html
other then a new bearing and new batteries and never seen a comp chip on a recharge battery b4 but and the 2 gears could of been cleaner but nice job though :)
Saya dh nunggu lm video ya akhiry ada lgi.. Sangat bagus
Terima kasih telah menunggu!
Hey! How old is this tool? The motor seems to be doing great even though it looks so old. Good work!
Y
Why is ! AGE ! SUCH ! A !. PROBLEM ! TO ! YOU !??
@@davidwillard7334 It's not a problem, i just complimented how good the engine works despite its age!??!?...
@@kret63 So How Old is it then ??
@@davidwillard7334 idk
its a shame there are no 1:1 Li-Ion size replacement for those old NiCD cells, would make it easier
You can go for 18650/21700 Lifepo4 cells. Their nominal voltage is 3.2V (Maximum 3.65V), you can use 4x in pararel to replace 12V battery. But they offer less capacity in same-package as Li-on cells, but are more safer. Also they are making small BMS-boards for them.
@@SnekSnack and sure thats fine, but if you could get Li-Ion cells in the same physical size as this it would be a nice easy swap *if* you could get them in the right voltage and amperage range
@@Mobile_Dom Why Should it be ; an Easy ! Swap ! For ! People ! Like ! You ! Then !??
The dead NiCad battery cell will leak over time and cause damage to the circuit board, it would be better replaced with a piece of PVC pipe.
Great job as always!
He used to use the pvc pipe
I'm concern about this too, I'm testing it.
Hoy has olvidado conectar en el BMS el b1 y B2. 🙄🤔Excelente trabajo, como siempre.
Los conecté a todos, pero me salté este paso, de todos modos, ¡gracias!
ruclips.net/video/aaRnrL44pUo/видео.html see it again here
Top
Why are there so many sets of gears in the shaft?
que es el spray que le hechas al plastico
merci pour la video c'est tres gentil de votre part
Je suis content que ça te plaise, merci pour ta visite
Chique show obg 👍👍🎸!!!!
Thank you!
Gratidão mestre!
Thank you!
Whilst it does work, man, it makes a huge mess of the threads. A good mod for this would be to get smooth dies (without the thread holders) and to add a stopper, so the thread doesn't go sideways. Prolly could put a really simple plate, screwed into the metal chassis, like an L bracket or something.
Source: i have a thread cutter, and it doesn't have threaded dies, they're smooth. The thread is threaded into a plate at the back of the cutter with a quick release nut. Made by a shop, so there's no brand, but the cut is smooth and clean with the exception of a small portion of the first threads on either side of the cut rod.
Okay, I got it, thank you for sharing the advice.
SOUNDS ! LIKE !.YOUR !! THREAD !! CUTTERS !! STUFFED !! UP !!
What did you do with these cordless machines
Thank you, but you need to buy JIS screwdriver for these tools to avoid damaging screwheads.
Okay, thank you for sharing!
Hi Sir I Am New Subscriber Very Awesome Work.
Super
充電はどうやってするんだろう?
ノーマル充電器でできるの?
Bro you which whetstone do you use for knife sharping
Good
Thanks
15:42 Вы заметили? Он на своё здоровье положил болт (перестал использовать вентилятор).
Я не дышал тогда, не волнуйся
How will you charge the battery? Through the discharge contacts of BMS?
آلة رائعة
Where do you get all these tools from
Bom trabalho
Hi! Can you tell me the name of the substance and machine you use at 6:08?
You don't show your 3d printer machine work ?
I use a printing shop service.
what is that machine?
It is a threaded rod cutter.
Random question.. The box you used to soak the plastic parts in (the transparent one), was it originally a cover for a turn table?
And great job man, your work is epic!
Yes it is.
He answered this question before and it's yes
Yes it was
it works like a finger cutter xD
Wow
👌👍
Excellent as always
Again I saw welding device excuse me for my question again but do know another way to welding battery i searched for that in my area but nothing
You can build your own one, just search in RUclips
You can learn from them ruclips.net/user/results?search_query=diy+battery+spot+welder
You connected the li batteries the wrong way and bypassed the bms protection, it will eventually fail after few cycles.
Okay, thank you for the feedback, I will check it again.
ficou show demais
عمل جميل احسنت لاكن تخر في تنزيل الفيديوهات الجدد
شكرا لك بعيدا مثل محتوياتي
What is the white Mikita ur using
It is 7.2V makita screwdriver.
. Ek number
What are your video shooting equipment?
I use Panasonic GH5 with cage, 6 softbox lighting and my custom tripod.
New video 📸
Yes, it is.
Şov başlasın GEAR Show başlıyor
И никто не говорит : "автор что немой"??
คุณเป็นคนชาติไหนครับ
А как заряжать?
❤️❤️❤️❤️❤️❤️❤️
❤️❤️❤️❤️❤️❤️❤️
Смазки мало.
全ネジカッターじゃん
はい、それは素晴らしいです
works or no
Work
Old lube looking good condition then you change low quality chinese lube. That ‘s the shit!
Okay, thank you!
👍🇪🇨
My xwife uses one of those to trim her toe nails ...
Oh, how her toe is…
EZ :)
流弊