RX 570 4GB ASROCK PHANTOM GAMING VIDEO CARD THERMAL PASTE AND PADS

I JUST WANT TO SHOW YOU MY DIY ON PUTTING NEW THERMAL PASTE AND THERMAL PADS ON MY 2 YEAR OLD RX 570 4GB ASROCK PHANTOM GAMING VIDEO CARD.
THERMAL PASTE IS ARCTIC MX4
THERMAL PADS IS GELID ULTIMATE 1.5MM

[@martinguillermograss9399]

Gracias Master genio pro

[@LenaMilize]

Wow 40°C !!!

[@AngelusArgentum]

Thanks. You gave me the confidence to make the mainteinance myself for my card. Clear and straight to the point video. Do you know anything about the backplate pads?

[@MotomotoPinas]

as per reading some threads in Reddit about backplate pads, it is still unclear to me if I have to consider modding my GPU with backplate pads, I am satisfied with the results after repasting/replacing my thermal paste and pads on my GPU.

[@dylancabj9881]

There was a lot of change after changing the paste and the thermal pads in terms of temperature.

[@Sacraty]

This is weird, we have the same gpu model and i used 1.5mm pads. The long pads seems to be not thick enough unless i put it wrong?

[@MotomotoPinas]

try checking if the board and rad is well put together , usually clearances occur when they are not put together properly

[@Aczon7]

mi gpu runs over 40º in w10 and 65-80º on premiere, i ve changed the thermal paste and cleaned it but it goes the same. do u recommend me change the thermal pads?

[@MotomotoPinas]

when you are planning to repaste you therma paste, consider replacing your thermal pads too, saves a lot of time in disassembling and assembling the gpu, i am currently using a quite expensive thermal pads here, you can screenshot the thermal pads for reference

[@seamess18]

I only bought thermal paste not pads. Is it ok if i only use thermal paste for the gpu itself?

[@MotomotoPinas]

for gpu thermal paste for the vrams pads,

[@ANDRIJJA]

Hi, can I use 1.0mm thermal pads instead of 1.5mm pads or duplicate 1mm pads? Is that a problem?

[@MotomotoPinas]

someone says that he already ask this to asrock and asrock tell him that the default thermal pad thickness is 1.5mm, that's why I use 1.5mm here

[@ANDRIJJA]

@@MotomotoPinas Okay and I will use 1.5mm thermal pads thanks for the reply.

[@MotomotoPinas]

@@ANDRIJJA okay thanks

[@cr1spyxl593]

Is thermal pads necessary if re thermal pasting?

[@MotomotoPinas]

for me it's a yes, since it bring me positive results like the temp is less to 5-15 degree celcius

[@janpolyangwas6782]

Temp ko ngayon sa asrock rx580 nasa 92°max bumaba ba temp? Medyo putol ang vid e pero nasa 40° kita ko, musta naman ngayon?? Mahal kasi ng thermal pads

[@MotomotoPinas]

masyado mataas yang 92 mo sir, siguro better check mo airflow ng case mo baka hindi ganun ka effective, or need mo na tlga replace ang paste at pads nyan baka tuyo na masyado, akin kasi sa highest ko lang 80 tlga, tapos ito ngayon sa fortnite ko from 50-60 pumapalo nalng sya ng 40-50, tapos if mag replace k ng pads at paste better dun ka sa mahal na para sulit yung pagkalas mo ng gpu kasi risky din sa iba ito sa pag diy, yung iba dito di na gumanwa kanilang gpu, subok ko tong gelid at arctic kasi

[@dylancabj9881]

At what temperature did it run afterward?

[@MotomotoPinas]

before it was running like minimum 60 at fornite game then after same load, same game, 40 peaking at 50

[@zeris3134]

what thickness of thermal pad did you use

[@MotomotoPinas]

1.5 as someone told me that it was the manufacturers standard on this gpu

[@MohammadYusophMMuti]

All the thermal pads are 1.5 thick?

[@MotomotoPinas]

depends on gpu manufacturer, please consult manufacturer customer support first,

[@MohammadYusophMMuti]

@@MotomotoPinas For phantom gaming ASRock rx 570?

[@MotomotoPinas]

@@MohammadYusophMMuti yes, i have stumbled upon a person asking asrock about this for the rx570 and asrock replied that the default thermal pads thickness of this gpu is 1.5

[@cjdl1987]

kea pa kea marepair asrock ko rx570 bigla kc ng nodisplay habang nglalaro pero umiikot pa fan balak ko repaste 3yrs nrn kc xa

[@MotomotoPinas]

dyan po ako hindi sigurado, hindi po ako technically knowlegeable sa mga ganitong bagay, lakas loob lang din po ako nag diy mag repaste at replace ng thermal pads boss, pasensya na po

[@juicesipp]

May link ka po ba san mo nabili yung pads at thermal paste sir?

[@MotomotoPinas]

shopee lazada lang po sir search mo lang po yung name

[@bicpineda2114]

Taena usto ko zana magpalita kaya lang baka di na magdisplay HAHAHAHAH

[@MotomotoPinas]

kaya mo yan, ako nga walang background sa ganito, makalikot lang tlga ako at malakas loob XD

[@melromsairgal1510]

Yung ganito nag gagarbage display :(

[@MotomotoPinas]

baka sira na po tlga

[@bellabrink8610]

I fucking love you

[@MotomotoPinas]