AsRock RX580 Phantom Gaming X OC Repair
HTML-код
- Опубликовано: 25 июл 2024
- Teardown of an AsRock RX580 Phantom Gaming X OC card with thermal pad and compound replacement.
#QCSbuilds #AsRock #RX580 #PhantomGaming #Maintenance #CryptoMining #Cryptocurrency #HowTo
0:00 Intro
1:00 Disassembly
2:42 Contact and Thermal pad failure
5:09 Card clean up
11:14 Cooler clean up
12:55 Thermal pad replacement
19:01 Thermal paste application
19:28 Cooler remounting
20:15 Reassembly
22:52 The Results
22:58 Like, Share, Subscribe...THANK YOU SO MUCH FOR WATCHING!
Links:
Quicksilver Computer Support
quicksilvercs.com/
AsRock AMD Phantom Gaming X Radeon RX580 8G OC
www.asrock.com/Graphics-Card/...
Noctua NT-H1 Thermal Compount
noctua.at/en/nt-h1-3-5g
Thermalright Extreme Odyssey Silicone 1mm Thermal Pad
www.thermalright.com/product/o... 
Наука
bro u could easily get nearly 30 to 32 MH/s more (from the whole rig) with phoenix miner -rxboost and some oc settings. i don't know if bios modding would be necessary or not but i could help u with the bat commands.
Hello, I've the same graphic card and I want to change the thermal pads aswel, but I'm not very experimented with it. Can you tell me what thick must be the thermal pads? You said in the video 1.5 and 1.0mm. The question is, can I use only 1.5mm everywhere, even the long one? Thanks in advance.
1.0 mm is the factory spec. However 1.5 mm works better. Especially on the VRMs.
Hello, your video saved my life, but I have a question... can I put 1.5mm on everything? or 1mm for one and 1.5mm for the VRAM?
Sometimes yes and sometimes no just depends on the brand of thermal pad and whether or not it'll squish enough.
Thanks!@@qcsbuilds5708
When you change the thermal paste is necessary to change the thermal pads also?
Only if they tare or if you're going to thinner pads to get better mounting pressure on the silicon
@@qcsbuilds5708 I’ll check but I think they are in good shape! Thx for the response
I think the vrm is 0.5 thick and the memory module was about 1.0 thick
The stock vrm pad is a fabric pad. I replaced it with the silicon pad. That card months later now runs so much better
@@qcsbuilds5708 oh okay thanks , it seems like the rx570 and rx580 are the same heatsink shroud
@@qcsbuilds5708 i've contacted asrock america regarding on this they've said that the correct thickness is about 1.5mm if you want i can send you a picture guide on it
@@kelsxd7163 thanks but that's ok. I'm not going to take it back apart. That's good info though.
@@kelsxd7163 hello!can you send me that picture if you still have it?i have rx580 p.gaming D 8G..thanks!
change bios man
I thought about that but it's been running great for a couple months now