If one day FlexiSpot desk frame become an essential part of minimalist furniture, it will undoubtedly be thanks to you and Mr. Basically Homeless. You've truly elevated our desk to another level. Cheers!
Omg the most impressive part is the thin triangular strip that moves in and out of the way to seal the gap between the table and monitor when everything is shut. Absolutely incredible
if I had to guess it would be that he used a router bit set that has bit profiles that are inverted shapes to one another, so he cut a groove out of it using one bit, then used the matching bit to cut the peice that fits inside.
The things I enjoy about your videos are; they are always clean, explained so well, you show just the right amount of detail so you're not stuck waiting for the next scene, and you genuinely seem very excited and passionate about what you make.
I was actually wondering if he would consider working with some kind of fabrication shop to build custom blank desks. If he did this to scale I imagine it would sell a few units. Not a ton but enough maybe to justify some cost/time cutting measures. He's made plenty of stuff that I imagine would sell in enough volume to come out of full custom pricing into merely "very high end" pricing
The hidden monitor + input device setup is amazingly cool. Would also be cool to have a button built into the lift so it can tell the computer to go to sleep when closed. Personally though, I'd use a low-power mini PC instead of putting so much work into a massive heat exhaust system.
I loved that you didnt just gloss over the problems with the 1st iteration of your heat sync and actually demonstrated an improved heat sync without turning it into a multi video series
The initial images he showed in the video looked so sleek, I was very intrigued. And then after he starts building it's this massive chonky thing, and I was very confused. Then he showed the amazing edges and I was very impressed.
I'm a bit surprised that many viewers seem to not know this concept, although it is pretty much the industry standard and also used on many other products like laptops and such. 🤷♂
We love our RUclips engineers who if they don’t have a public sighting every 2 weeks we have to assume they died to high voltage, don’t put disrespect on their names
I like the erratic style of some youtuber engineers. But sometimes it's nice seeing an actually sensible and functional product in the end. Stuff Made Here has similar high quality projects, although they are on the less sensible side xD.
@@z0bi_ cuz only genius do it like that most of the engineer on youtube are engineer by paper but not actual engineer just going doing stuff they like at absolute lazyness but stuff made here and diy perks are craftman engineer that do it by actually caring about their final product
I have a suggestion Install a biometric fingerprint reader with a motorized actuator to raise the desk. This should be recessed under the lip of the desk. By doing this, three problems can be solved: 1. Only authorized individuals can lift the computer. 2. The magnet attached to the wood panel could potentially damage the wood over time through repeated use. This can be avoided. 3. There is no need to keep a magnet on the desk, further concealing the computer inside.
@@superkhangfn8593 Water may be an inanimate substance, but you'd think otherwise when you're trying to keep it out of something. It's like a gremlin with magic powers to get into your _everything!_ XD Even when you know it's the capillary action, it still seems improbable.
A video about DIY air purifiers would be great since they are more effective and cheaper than commercial options. Additionally, you could explore ways to make them blend into your home decor better than most existing videos on this topic.
@@eeeee11235eh not really. Unless you have a super strong magnet you aren’t breaking anything. Even a strong neodymium magnet from amazon wont break anything. Trust me Ive literally tested it on my phone and pc.
its legit crazy to think about DIY perks making such high quality stuff alone while LTT legit has an army and half of their stuff gives out garage DIY vibes
@@martinfletcher9699 With their whole team of engineers, LTT could even build a desk even thinner and more impressive than this, but it would take months if not over a year, which I’m sure this did too, so it simply wouldn’t be practical if you’re not going to sell it in large quantities.
@@martinfletcher9699 Linus & Co. are just too immature, impatient, and irresponsible to be able to pull off something even *close* to this. They are fun to watch, but *_bloddy_* frustrating at the same time.
Whatever FlexiSpot paid for this sponsorship, it wasn't enough! What an amazing project! I didn't think it was possible but you've outdone yourself again. You're an incredible artist.
This guy's level of precision and detail is insane -- not just the engineering, woodworking & electronics in his builds -- but also the video editing. Jack of all trades, master of all.
I love that you don't hide your mistakes along the way, encouraging people to keep trying and working as they can see that these things happen to all of us.
Man, this is absolutely amazing. Believe me, I have seen thousands of DIY videos on RUclips maybe millions can't count after all these years but this one is my favourite. You have amazing skills and knowledge. I admire you. Thank you for this wonderful video.
I get the sentiment, but tech RUclipsrs are not more qualified to do advanced engineering projects. Not to mention the loose definition of "tech RUclipsr" since this guy is a RUclipsr that creates most his content around tech.
If you've seen the video about modding the Canon R5, I highly recommend it. This should clear any doubts that "this guy" actually _is_ a tech youtuber :).
Not sure I agree to the sponsor fitting the video 😆 This was like watching a lambourghini being built and by the end the mechanic asks you if you'd like to buy a kia picanto w/o climate control
@@rpals5412Huh? How? The legs are literally a part of the desk and they‘re way more advanced than any regular legs? He specifically mentioned that they can be combined with any desktop of your choosing. In your example it‘s like advertising the tires you used on your lamborghini after showing how perfectly it performed on a race track. Same as here, you can use those tires on a cheaper car or a super sports car. If this doesn‘t fit the video then Idk what sponsorships he should take at all.
@@rpals5412 Well then you're never going to be pleased. I've seen two flexispot sponsors. This one, and one for StyroPyro. They know how to pick their sponsors to showcase their desks well.
I still keep on returning to this video because its absolutely mind-blowing. Other makers have made desk PCs and invisible set-ups, but this is a cut above. None of the others are so complete, so thorough, finished to such a high standard, and ultimately just so good. A real Matt masterpiece
The level of detail in this build is mind-blowing. It's fascinating how you've turned a simple desk into a powerhouse PC, while keeping an elegant aesthetic. The cooling system is unique and seems very efficient. This is an impressive feat of engineering.
I honestly think it's a fire hazard considering how he's electrifying copper tape to power the fans. The adhesion on that stuff is absolutely terrible and due to the nature of PC gaming having sudden loads + being mounted on brass that's rapidly heated & cooled makes it a disaster in waiting. The changes he did at the end is also going to result in restricted air flow since the output is so close to the wall and a fan snagging hazard for toes beneath the desk, not to mention the powerful magnet constantly being grinded an inch away from sensitive electronics.
@@Runefrag add the oled burn in and you have a certain disaster. If the electric/electronic parts don't blow up or start a fire, the expensive oled will get a serious case of burn in. I would give the inner parts more room to breathe, and possidly have an upward facing exhaust at the back, and definitely add a switch to turn off the monitor when the lid is down.
@@Runefrag I mean, the motor hubs with the stickers are facing the inward side of the table. So, if they function like any computer fan, they're blowing away from the table.
Idk how you can possibly one up this, at this point you have done it basically every new video. But idk how it will be possible to out do this video. This blew my mind, like I can’t comprehend the sheer amount of brain power you had to put into this project to make it look so perfect.
the amount of engineering that goes into these builds is absolutely stunning. I love these stealth builds you make. If you are ever looking for a challenge though i would like to see what a more affordable build would look like
Most of the raw materials are relatively inexpensive. Swapping the PC components for mid or low end components would make this much more affordable. You’d still have to be an engineering genius like Matt to get that hidden monitor hatch setup, though :P
I love that you showed the issue with first heat sink. Real DIY is a continuous process where some ideas might sound good on paper but fail in actual practice. But you learn from those mistakes and it makes future designs stand stronger against failure. Thank you for keeping it real and I love your videos :)
Agree. I'm sure he only showed this one bigger issue and simply didn't talk about many other smaller issues he had to work around. If you watch the youtuber stuff-made-here you will see much more approaches that didn't work. So don't be disapointed when doing DIY, failiure is normal!
Sir, this is one of the coolest things I've seen made for a PC. The 140mm Fans may be slightly less elegant than the original design, but silence and efficient cooling easily make them the best option. FlexiSpot system being mountable to any desktop is brilliant as well.
Never in the history of mankind could one spilled drink cause so much damage. The tapered sides were a brilliant idea. It makes you wonder where the screen went. Really clever.
Great build, but the cooling mechanism makes no sense. A 480mm radiator is like £90. How much cheaper was it to order 40 of those, weld them together with solder and the copper piping for it all and the extra like 6 fans that are about £30 each. And if it were cheaper, it stil ldoesn't seem worth it for the poorer performance. Nor does it justify it given the £2000 GPU, £500 CPU and £500 of steel, £2000 monitor etc etc.
@@Patrick-y4d1z Yeah 90 for normal radiator. But radiators like that from old servers are basicly free. Ofc price is without work and soldering things. You compared price for radiator against price of costs of those cpu coolers + work + solder things + fans. What he said in video and compared was cost of 40x cpu coolers vs radiator. I bet if you build ur own PC you dont compare pre-built system cost against your hardware with ur assembling worktime - 20€ /hr...
@@nonamenosurname8516 Even if they were £1 per server cooler, the cost of the copper piping alone would close the gap. That's ignoring the £200 of fans he attach. So he went for a more expensive solution, that was worse in performance, heavier and takes up more space while also making more noise. So no, ignore the time spent (even if it has value) and the way he didn't wouldn't have been cheaper. While also being worse in literally every metric.
This thing is so amazingly, ludicrously overbuilt Everything you make is the ultimate definition of a nerd with infinite budget and the skills to make litterally anything
I'm a relatively new dad and all I can think about is... your dad must be so proud of you. This is truly the endgame. But please don't stop. I need these!
Not going to lie this is the most epic PC build I have ever seen. Showed the intro, opening up the monitor, to my other half who normally couldn't care less about such things and she was like 'wow... rewind that'. High praise indeed.
@@travisash8180Unfortunately, you couldn't. This would be an absolute disaster to manufacture at scale. It would be a minor miracle if you could sell these for less than 10K even if you were producing thousands of them.
Man, this has to be your best build yet! I've got my own DIY desk with a variable height base as well, and this has me itching to make a new one! Incredible work!
I normally don't comment much, but I follow this channel for 6 years now (since the led crystal decoration). And though the projects became more and more builds I'll probably never going to do myself, the videos still have the same magnificant vibe to it. I'm so glad and hooked when another video pops up! Awesome work and thank you so much for this!
Microcontroller, reed switch, small magnet, have that emulate a keyboard and emit the Sleep key code when the lid is closed, compared to the rest of the build it would be an extremely easy piece to put together. That is, of course, assuming the power button hooked to the motherboard isn’t able to be tapped into; if it was, you could just repurpose that connection and handle it with a GPIO connection.
I’m amazed by how well you’ve planned what cuts you had to make and how to arrange everything so it comes together so seamlessly when building it. I mean I don’t see another way to do it than planning ahead, you couldn’t just cobble it together, but the complexity of it makes that an impressive task to have executed so well !
The build is obviously insane, but as someone who hates ads and sponsor messages, the flexispot sponsorship is the ONLY time I've ever been charmed by sponsor integration. Part of it is how well the sponsor goes with the build, but the presentation is fantastic as well, not just an afterthought tacked on in the middle for revenue. Bravo
@@Raderade1-pt3om and it's likely the build he's using for editing, as it contains massive amount of NVMe SSD storage, even tho he could probably build an invisible and completely silent NAS server with insane compute power and storage, maybe with a server CPU, like the most powerful AMD EPYC (9654P) that has 96 cores and 192 threads, which alone can be tricky to cool down with it's 360W default TDP, then all the drives, which requires some cooling as well sure, a NAS server does not require a GPU, so it might not require a massive cooling solution like the desktop PC, but some airflow for the drives and a good enough cooler for the CPU, that's all he would need, and if it's running a local VPN with port forwarding for it to work, he could essentially connect to it with everything he owns for "unlimited" private cloud storage (it's easy to setup and use Nextcloud and OpenVPN, which are 2 good services for selfhosting)
I get what you're saying but they would. Like heating and cooling are some of the biggest concerns with any pc build and pretty much all of them do discuss it. Benchmarking and temperature results are major components of the pc crowd.
OMG! This is the first time I see someone build a really invisible PC, not mentioning that your setup really only has the power cable connected to the desk. Almost all attempts have a few cables showing somewhere. You should do consulting to big companies and work for R&D or product development. Your vision is extraordinary. And yes, this was one of the best well finish work you have done.
I love how this channel goes over some fairly complex concepts but breaks it down into little understandable bites that eventually produce these engineering masterpieces. I also love that even all the brackets look cool because they are made from aluminum and brass
As an engineer stuck in a corporate world, Matt and this channel pretty much single handedly got me back into my passion of creating. Completely changed my life! My end game desk suggestions: Wireless coil charging embedded in the keyboard platform with corresponding wireless kb, mouse and phone charging. I'd love to the keyboard platform routed out so the desk pad locates perfectly - maybe with magnets? Fan shroud with plenum to hide the fans and quiet them even more. Have a nice matching handle made for your magent in the same wood and finish as the table, and clad bottom with velvet. AND WHERE ARE THE LEDs?
DIY Perks has truly jumped to a whole other level! Not in a bad way in comparison to his previous projects. Just with time there’s been no shortage of remarkable progress! Great job! I mean that wholeheartedly!
You've already set the bar so high but, this is completely a whole new level Matt. Incredible. "Shut up and take my money" memes flying around right now.
Every time I forget that DIY means "do it yourself" and think it means "stupid lazy creation," you post a video to remind me of its meaning and how masterful it can be.
Yea... you could totally reproduce this diy with an engineering degree, an endless budget and a wood working father. Totally doable for the average person.
trust me you dont need an engineering degeee for this, the stuff you learn in an engineering degree does help, but it isnt vital at all.@@balsalmalberto8086
My only thought after the video has been, "It sickens me to live in a world where a product of this cool factor isn't standard." Like, damn. I wish you could go down to your Best Buy and grab the newest Desk with Invisible Monitor & KB&M Compartment like any every day product. It's just so practical. Saves so much space.
@@JC-Alan are some of them like this? Most of the ones I've seen have been "gamer" focused with rgb and a glass top that shows everything. Basically the opposite of this.
@@htsunmiku TBH, no, most are gamer focused like you said, but that's not what prevents them from gaining market share. It's that they are an absolute pain in the ass to move. And people move a lot.
Love the video and project!!! Just wanted to say you should put a cloth/velvet under that magnet to stop it from scratching the wood with repeated opening and closing
Channels like this give me hope for the DIY space. Ive been thinking about building my own desk out of spare desk and while i wont be building this type of build it still gets me existed to try.
And that cooling solution is exactly why you should test before putting everything together. Thank you for being open with your mistakes and letting us learn from them.
I mean, he had to put everything together to test it out because that's probably when the actual air flow restriction hit. Sure, glueing the wood could have been put for later, but looks like the wood never came in the way of disassembly.
This is so freaking cool! Honestly, a more affordable version of this would be great for dorms and small homes! A workspace during the day, a table for eating, homework and fun at night… or a table for crafting and work all in one! The lift mechanism is really something… your builds are getting more and more impressive!
Honestly for practical application it is just easier and cheaper to have a Laptop instead of a desktop PC. It is portable, can be used anywhere (also as a Television replacement) and stored out of sight if not in use.
This is one of the best things I’ve seen within the computer space. I’m completely blown away by your ingenuity and troubleshooting. Desk looks absolutely incredible. Bravo
I have rarely encountered envy in my 28-32 years of life, but right now I am seriously beside myself admiring your craftsmanship and ingenuity; the finish of this project is maddeningly brilliant!
I have commonly encountered people in my life who don’t understand the difference between jealousy and envy. One involves three parties and relates to fear of loss, the other involves admiration, with a desire/aspiration to have what somebody else has, or be like them. One is exclusively unhealthy, the other is generally healthy. They are not interchangeable terms - jealousy can lead to envy but never the other way around.
@@X22GJP jeal·ous /ˈjeləs/ adjective adjective: jealous feeling or showing envy of someone or their achievements and advantages. They are interchangeable terms.
I was hoping for a motorized opening system with a push of a button, but that magnet is actually so elegant that I fell in love with it. That build is so sick.
Maybe if the button was flush in the wood, but even then, a strong magnet is way cooler. Essentially a key that you have to know about. You can find a button relatively easily....
You really never cease to amaze us. Honestly, the desk is deep enough, so the extra fans at the back sticking out will likely NEVER be a problem. Sure, you might have to clean them a bit more often without a mesh in front of them, but they're relatively high up, and don't suck/blow as hard even.
Your projects always reach such an incredible level of fit and finish. They manage to be stylish without being snobbish, unassuming, but not boring, and sleek, but not edgy. And everything manages to work elegantly. A lot of DIY content either has really complicated, technical skill requirements or is held together with zip ties and hope and looks like it probably broke the second the camera was turned off. Your projects always have such wonderfully elegant solutions to all the little problems you have to solve that manage to seem doable by an averagely "handy" person with regular tools and skills without being a janky mess. Incredible work.
I'm in such genuine awe of this build right now, it makes me wish I could go out and buy one, cause I know that if I tried to build that lifting mechanism, I would get to the third failed iteration and just have to put the project down. I wish I could buy the things you make so much
I'm not gonna lie, I don't understand half the shit you film, but you still make it completely enjoyable to watch. The film quality is so aesthetically pleasing.
I love how calm he is. Any other youtuber would hype you out with a cool looking pc which comes no where near this build or any of his build. Love you Matt you help me go calm too.
This was a beautiful build that could be even better with a couple small enhancements. First, replacing one of the gas struts with a small linear actuator would make the opening and closing automatic, controllable by the same panel as the table lifting mechanism. Second, you could opt for only one layer of heatsinks and use 90mm fans instead and I bet the cooling performance would be equally as good. If you're not already using high performance thermal paste to interface between the brass rail and the heatsinks, that might also help too. This really inspired me to think about building one of my own versions of this desk and the kind of features I'd like to include. Nice job!
This is beyond excellent. You sir, have prove yourself to be the best DIY creator of all time. When I read the title of invisible PC and saw the thumbnail, I thought he hasn't hooked up the monitor yet but I had no idea that it is in the desk itself. This is one of the best PC builds I have ever seen.
Waiting for “Today on DIY Perks, we will be using galvanized square steel, eco-friendly wood veneer, and expansion screws to build a suitable living area for little John and his 1 millions kids.”
@@abeginnerspov5968i know islam permits polygamy, but I've never heard a stereotype about muslims having many kids. The stereotypes I've heard is usually referring to Hispanics or those of the indian subcontinent (majority hindu)
@@X_manonot wanting kids is mostly in hyper-individual/western cultures where family/community support is not encouraged and promoted by the society. Hard to want kids when even 2 incomes is not always enough to make ends meet and childcare costs an arm and a leg.
❤❤ Love it! Great work and inspiring to see! Stage II -use a hidden or under the table projection TV display as your monitor, and a hidden in ceiling laser projection keyboard to shine on the desktop, and a counter sunk touchpad or and you'll have a truly invisible PC!
If one day FlexiSpot desk frame become an essential part of minimalist furniture, it will undoubtedly be thanks to you and Mr. Basically Homeless. You've truly elevated our desk to another level. Cheers!
Thanks for sponsoring the project! Much appreciated, I loved working on this one 😊
@@DIYPerksMake the keyboard and display invisible too
@@DIYPerks Good Heavens!
@@LimitlessGamers it's already bin done by another Channel owner. Also it didn't work as it should.... yet.
DIY perks and basically homeless, 2 🐐s of the game
“Welcome to DIY Perks. Today, I'll be making an invisible house, complete with a pool”
You not funny Kid
fr man, this guy is actually so smart
😂
@@FGV_Gravity it was funny so you are wrong
@@FGV_Gravity 💀
The thin edge trick and the spring-loaded move-out-of-the-way wooden bar hiding gap thingy blew me away
😂😂😂😂😂😂for real
yea i mean this guys is actually amazing in my eyes, his ingenuity is mind boggling
the gap filler thing actually made me say holy f*ck out loud
i missed that part at first so thank you for calling it out so I could go back
i still don't understand how it works. he only spent like 2 seconds talking about it
Omg the most impressive part is the thin triangular strip that moves in and out of the way to seal the gap between the table and monitor when everything is shut. Absolutely incredible
It actually makes no sense to ne
not just impressive, extremely satisfying too!
so simple, yet extremely effective!
if I had to guess it would be that he used a router bit set that has bit profiles that are inverted shapes to one another, so he cut a groove out of it using one bit, then used the matching bit to cut the peice that fits inside.
@@cristianruske2875 sure it doesn't to you
The things I enjoy about your videos are; they are always clean, explained so well, you show just the right amount of detail so you're not stuck waiting for the next scene, and you genuinely seem very excited and passionate about what you make.
That hinge and lift mechanism is an absolute thing of beauty. Your builds just keep getting better and better!
they do. He is not running out of ideas. in terms of what he can build or will build next, I can't even imagine it.
I was actually wondering if he would consider working with some kind of fabrication shop to build custom blank desks. If he did this to scale I imagine it would sell a few units. Not a ton but enough maybe to justify some cost/time cutting measures.
He's made plenty of stuff that I imagine would sell in enough volume to come out of full custom pricing into merely "very high end" pricing
The hidden monitor + input device setup is amazingly cool. Would also be cool to have a button built into the lift so it can tell the computer to go to sleep when closed. Personally though, I'd use a low-power mini PC instead of putting so much work into a massive heat exhaust system.
He literally could've used some springs and a latch to make it open with a press of a button
@@thioga1you literally could post a video on your own channel of you doing a better job.
We wait in anticipation.
If a thief broke into your house, he would say, "Wow, this guy doesn't own anything. Let's go rob the house next door." 😂
lol underrated comment
"why does this guy own 15 desks?? What a weirdo!"
How? He's basically homeless now. :p
Leave on the sun light and they'll be like how the... but it's night right now!
"Why is this table so fucking heavy? What kind of wood is that?! I'm not carrying it"
I loved that you didnt just gloss over the problems with the 1st iteration of your heat sync and actually demonstrated an improved heat sync without turning it into a multi video series
Yes, he always show the flaws too. Love this channel.
Dude. This is FAR and away the coolest build I've ever seen, not just on your channel but on ANY. *PERIOD*
I love that you keep in the failed portions of the build, like the first cooling system, and show the process of fixing it!
Yesss
indicates integral integrity inclusivity inspiring irresistible infectiousness imao. 🎬🎬🎬
🤦🏽
Those tapered edges actually tied together the desk a lot more than I expected. It actually looks a lot more sleek that way.
That was a genius simple and elegant solution !
It's just an optical illusion powered by selective & careful camera angles.
The initial images he showed in the video looked so sleek, I was very intrigued. And then after he starts building it's this massive chonky thing, and I was very confused. Then he showed the amazing edges and I was very impressed.
His dad is an incredibly good carpenter. Makes sense.
I'm a bit surprised that many viewers seem to not know this concept, although it is pretty much the industry standard and also used on many other products like laptops and such. 🤷♂
Seeing a RUclips engineer who actually does things properly and thoughtfully is so refreshing. Every video is gold
We love our RUclips engineers who if they don’t have a public sighting every 2 weeks we have to assume they died to high voltage, don’t put disrespect on their names
You are fricking right A self made craftman engineer is better than any of those paper engineer
I can name a few youtubers that gained my respect over the year👍@@skydivenext
I like the erratic style of some youtuber engineers. But sometimes it's nice seeing an actually sensible and functional product in the end.
Stuff Made Here has similar high quality projects, although they are on the less sensible side xD.
@@z0bi_ cuz only genius do it like that most of the engineer on youtube are engineer by paper but not actual engineer just going doing stuff they like at absolute lazyness but stuff made here and diy perks are craftman engineer that do it by actually caring about their final product
I have a suggestion
Install a biometric fingerprint reader with a motorized actuator to raise the desk. This should be recessed under the lip of the desk. By doing this, three problems can be solved:
1. Only authorized individuals can lift the computer.
2. The magnet attached to the wood panel could potentially damage the wood over time through repeated use. This can be avoided.
3. There is no need to keep a magnet on the desk, further concealing the computer inside.
Great idea
When someone spills something on your table and says "Good thing you had nothing on the table", and you crying on the inside. 🤣
I think the desk is water proof since there are no visible cuts, but I could be wrong
@@superkhangfn8593 with that spring loaded piece of wood at the back of the screen, it's unlikely to be water proof
"on the inside" quite literally
@@superkhangfn8593 Water may be an inanimate substance, but you'd think otherwise when you're trying to keep it out of something. It's like a gremlin with magic powers to get into your _everything!_ XD Even when you know it's the capillary action, it still seems improbable.
@@superkhangfn8593 It's hardly water resistant let alone waterproof
I love that you are acknowledging error and show how you approach a fix.
I couldn't agree more. it makes for a more authentic feel :)
Is that where he dented the surface near the start of the video and pretended otherwise?
@@Skobeloff... Was referring to the cooling issue.
@@memamu0 ahh
A video about DIY air purifiers would be great since they are more effective and cheaper than commercial options. Additionally, you could explore ways to make them blend into your home decor better than most existing videos on this topic.
I recommend gluing a small piece of felt to that magnet to save it from marring your lovely oak surface over time.
Yeah definitely agree there.
At least it's not veneer this time so he has the option to sand any scratches out lmao
magnet w/ computer is also kinda risky
@@eeeee11235eh not really. Unless you have a super strong magnet you aren’t breaking anything. Even a strong neodymium magnet from amazon wont break anything. Trust me Ive literally tested it on my phone and pc.
@@eeeee11235 Wait, do you not know how electronics work? There's no hard drives, so there's no issue. Nothing else is severely affected by the magnet
@@eeeee11235 false with modern pcs. Only hard drives interact magnetically.
"We have an Army." - LTT
"We have a dad." - DIY Perks
its legit crazy to think about DIY perks making such high quality stuff alone while LTT legit has an army and half of their stuff gives out garage DIY vibes
DIY Perks's dad is a wonderful craftsman, absolute GOAT on a build team!
@@martinfletcher9699 That's just their style I guess.
@@martinfletcher9699 With their whole team of engineers, LTT could even build a desk even thinner and more impressive than this, but it would take months if not over a year, which I’m sure this did too, so it simply wouldn’t be practical if you’re not going to sell it in large quantities.
@@martinfletcher9699 Linus & Co. are just too immature, impatient, and irresponsible to be able to pull off something even *close* to this. They are fun to watch, but *_bloddy_* frustrating at the same time.
I love that this channel is called DIY Perks, it's... almost ridiculously undersold.
My jaw dropped at 0:25
Whatever FlexiSpot paid for this sponsorship, it wasn't enough! What an amazing project! I didn't think it was possible but you've outdone yourself again. You're an incredible artist.
The paid 160k
@@roro_81 how'd you know
@@roro_81😂 I wish!!!
@@roro_81 me when I lie
@@DIYPerks he/she didn't mention which currency LOL. Depending on which one, he might still be correct ;)
Absolutely gorgeous, i want it... Well done again! H.
I love your content also!! You're so very talented and an all-around awesome person.
It doesn't fit a coffee machine, so needs improvement 😅
well, now make a hidden room, behind a library that opens with a voice activated spell :D
@@ivovass195Could use more foam bricks as well
Thanks!!
This guy's level of precision and detail is insane -- not just the engineering, woodworking & electronics in his builds -- but also the video editing. Jack of all trades, master of all.
I loved how you are digging into the server parts bin to build this set up. The ingenuity is the reason why I subscribed to your Chanel.
So someone tell LTT that someone has taken the title for cleanest setup
It’s been that way for a while! DIY Perks desks are always better than LTTs
There was no competition lol.
And let's not forget the water cooled computer.
LTT had a completely different goal. Though the second cooling system in this video is way better than LTT's.
LTT can't compete with this anymore, their volume requirements to keep up with YT algo has lowered quality.
that hinge design is simply phenomenal. Hats off to Matt the best engineer on youtube.
Well, it would be great if he would make his project files (CAD etc..) available like e.g. GreatScott does it on every single one.
Then you have not seen AppliedScience 😅
Mark Rober is good as well
I love that you don't hide your mistakes along the way, encouraging people to keep trying and working as they can see that these things happen to all of us.
Man, this is absolutely amazing. Believe me, I have seen thousands of DIY videos on RUclips maybe millions can't count after all these years but this one is my favourite. You have amazing skills and knowledge. I admire you. Thank you for this wonderful video.
This guy isn't even a Tech RUclipsr, but makes the most absolutely amazing PC setups, far superior to anything else!
I get the sentiment, but tech RUclipsrs are not more qualified to do advanced engineering projects.
Not to mention the loose definition of "tech RUclipsr" since this guy is a RUclipsr that creates most his content around tech.
If you've seen the video about modding the Canon R5, I highly recommend it. This should clear any doubts that "this guy" actually _is_ a tech youtuber :).
He is more of an engineer than a tech youtuber, with all the things he has built
He is a tech youtuber, all his videos are literally technology.
First of all: You're an absolute madlad.
Second: Kudos for finding a sponsor that fits so naturally with your project. This is an ad I can get behind.
Not sure I agree to the sponsor fitting the video 😆 This was like watching a lambourghini being built and by the end the mechanic asks you if you'd like to buy a kia picanto w/o climate control
@@rpals5412Huh? How? The legs are literally a part of the desk and they‘re way more advanced than any regular legs? He specifically mentioned that they can be combined with any desktop of your choosing. In your example it‘s like advertising the tires you used on your lamborghini after showing how perfectly it performed on a race track. Same as here, you can use those tires on a cheaper car or a super sports car. If this doesn‘t fit the video then Idk what sponsorships he should take at all.
@@rpals5412 Well then you're never going to be pleased. I've seen two flexispot sponsors. This one, and one for StyroPyro. They know how to pick their sponsors to showcase their desks well.
OMG That little piece v shaped behind the mechanism OMGGG thats looks so ..... satisfying
its so perfect!
I still keep on returning to this video because its absolutely mind-blowing.
Other makers have made desk PCs and invisible set-ups, but this is a cut above. None of the others are so complete, so thorough, finished to such a high standard, and ultimately just so good. A real Matt masterpiece
The level of detail in this build is mind-blowing. It's fascinating how you've turned a simple desk into a powerhouse PC, while keeping an elegant aesthetic. The cooling system is unique and seems very efficient. This is an impressive feat of engineering.
I honestly think it's a fire hazard considering how he's electrifying copper tape to power the fans. The adhesion on that stuff is absolutely terrible and due to the nature of PC gaming having sudden loads + being mounted on brass that's rapidly heated & cooled makes it a disaster in waiting.
The changes he did at the end is also going to result in restricted air flow since the output is so close to the wall and a fan snagging hazard for toes beneath the desk, not to mention the powerful magnet constantly being grinded an inch away from sensitive electronics.
@@Runefrag add the oled burn in and you have a certain disaster. If the electric/electronic parts don't blow up or start a fire, the expensive oled will get a serious case of burn in. I would give the inner parts more room to breathe, and possidly have an upward facing exhaust at the back, and definitely add a switch to turn off the monitor when the lid is down.
@@Runefragthe fans are blowing away from the user
@@snjert8406 Pushed up right against the wall? I don't think so.
@@Runefrag I mean, the motor hubs with the stickers are facing the inward side of the table. So, if they function like any computer fan, they're blowing away from the table.
Eventually it's gonna become a challenge to find an item in this dude's house that _isn't_ secretly a PC.
_"Surely the submarine isn't also a PC-"_
Theft King with no replies?
@@aatreyu1234who? Unless you stealth camp in a ‘98 Dodge Caravan during the winter, I won’t know ya, so probably explains the no comments
"Surely this outdoor pond doesn't have a supercomputer in it" .... wait a minute why do I see brass bars down there
Like the is it cake challenge 😂
I find it funny that a horror channel is watching some guy build a desk pc.
That Finish! The miters, the little filler wood slot being so clean. The custom soldered cooling. LTT could never. That's one beautiful build.
Ha, I was also thinking that Linus would be watching and thinking he couldn't get the same finish. This is awesome!
Idk how you can possibly one up this, at this point you have done it basically every new video. But idk how it will be possible to out do this video. This blew my mind, like I can’t comprehend the sheer amount of brain power you had to put into this project to make it look so perfect.
the amount of engineering that goes into these builds is absolutely stunning. I love these stealth builds you make. If you are ever looking for a challenge though i would like to see what a more affordable build would look like
Most of the raw materials are relatively inexpensive. Swapping the PC components for mid or low end components would make this much more affordable. You’d still have to be an engineering genius like Matt to get that hidden monitor hatch setup, though :P
I love that you showed the issue with first heat sink. Real DIY is a continuous process where some ideas might sound good on paper but fail in actual practice. But you learn from those mistakes and it makes future designs stand stronger against failure. Thank you for keeping it real and I love your videos :)
Agree. I'm sure he only showed this one bigger issue and simply didn't talk about many other smaller issues he had to work around. If you watch the youtuber stuff-made-here you will see much more approaches that didn't work. So don't be disapointed when doing DIY, failiure is normal!
One of the most satisfying videos I've ever watched.
The spring loaded wooden wedge is almost sensual.
Sell these ideas and bring it to consumers. You should patent your brilliant ideas and small details. This is genius.
Sir, this is one of the coolest things I've seen made for a PC. The 140mm Fans may be slightly less elegant than the original design, but silence and efficient cooling easily make them the best option. FlexiSpot system being mountable to any desktop is brilliant as well.
There could be half of the coolers, with smaller fans, but then the noise..
Half size nactua fans?
Never in the history of mankind could one spilled drink cause so much damage. The tapered sides were a brilliant idea. It makes you wonder where the screen went. Really clever.
I wouldn't even allow any drinks in the same room as this bad boy.
Surely he has to have waterproofed the compartments or something. If not yeah no drinks allowed within 30 feet.
maybe if you have a silicone/any kind of water resistant mat on the desk, it could protect it from any possible liquids.
@@nathanw5431considering he didn’t show that? No
The fact that you actually tried the computer and improve the heating system really shows up the quality of this build. Congrats !
Great build, but the cooling mechanism makes no sense. A 480mm radiator is like £90.
How much cheaper was it to order 40 of those, weld them together with solder and the copper piping for it all and the extra like 6 fans that are about £30 each.
And if it were cheaper, it stil ldoesn't seem worth it for the poorer performance. Nor does it justify it given the £2000 GPU, £500 CPU and £500 of steel, £2000 monitor etc etc.
@@Patrick-y4d1z Yeah 90 for normal radiator. But radiators like that from old servers are basicly free. Ofc price is without work and soldering things.
You compared price for radiator against price of costs of those cpu coolers + work + solder things + fans. What he said in video and compared was cost of 40x cpu coolers vs radiator.
I bet if you build ur own PC you dont compare pre-built system cost against your hardware with ur assembling worktime - 20€ /hr...
@@nonamenosurname8516 nobody gives away so much copper for free, you are looking at 20-30 bucks per heatsink with most sellers.
yes but it's a DIY channel, a flat sceen and a gpu cant be custom buildt, a refrigeration system can be made and it's also cheap.
@@nonamenosurname8516
Even if they were £1 per server cooler, the cost of the copper piping alone would close the gap.
That's ignoring the £200 of fans he attach.
So he went for a more expensive solution, that was worse in performance, heavier and takes up more space while also making more noise.
So no, ignore the time spent (even if it has value) and the way he didn't wouldn't have been cheaper. While also being worse in literally every metric.
This thing is so amazingly, ludicrously overbuilt
Everything you make is the ultimate definition of a nerd with infinite budget and the skills to make litterally anything
I love how you continually one-up your previous projects. I loved your first invisible PC desk, and this one makes it look like a first draft.
I think that's why he mentions it's an " ENDGAME" build a few times. I mean really where do you go after this?
I'm a relatively new dad and all I can think about is... your dad must be so proud of you. This is truly the endgame. But please don't stop. I need these!
Wish my dad was proud of me.
@@jake360flip💀💀
@@jake360flip real
@@jake360flip how can someone be so real
Him and his Dad have the same fashion sense and can share clothes, which is nice.
Not going to lie this is the most epic PC build I have ever seen. Showed the intro, opening up the monitor, to my other half who normally couldn't care less about such things and she was like 'wow... rewind that'. High praise indeed.
Watch basically homeless no wires build sponsored by flexispot an insane amount of coding to get it to work
Not going to lie, it's a nice uppy downy desk. You could sell lots of these and feed the starving millions.
@@travisash8180Unfortunately, you couldn't. This would be an absolute disaster to manufacture at scale. It would be a minor miracle if you could sell these for less than 10K even if you were producing thousands of them.
Man, this has to be your best build yet! I've got my own DIY desk with a variable height base as well, and this has me itching to make a new one! Incredible work!
11:09 "and that's why I bought 40 of them" absolutely killed me
and yet ended up not using them
😂😂
Yeah, 3 videos of this quality a year, is MORE than enough. OUTSTANDING.
nah wish he'd upload more tbh
I normally don't comment much, but I follow this channel for 6 years now (since the led crystal decoration). And though the projects became more and more builds I'll probably never going to do myself, the videos still have the same magnificant vibe to it. I'm so glad and hooked when another video pops up! Awesome work and thank you so much for this!
You could put fans on angle, whatever angle suits your table, and direct airflow with 3d printer part.Amazing build mate
I think adding a small button to the desk which would automatically put the computer to sleep when the lid is closed would add in a nice touch too.
a lapdesk, a desklap ?
deskfold
And close all your tabs
You could probably trick windows into treating it like a laptop lid
Microcontroller, reed switch, small magnet, have that emulate a keyboard and emit the Sleep key code when the lid is closed, compared to the rest of the build it would be an extremely easy piece to put together. That is, of course, assuming the power button hooked to the motherboard isn’t able to be tapped into; if it was, you could just repurpose that connection and handle it with a GPIO connection.
This has to be by far the most original Flexispot youtube video, they did well sponsoring DIY Perks, welldone on this, definitely an endgame build.
If Corsair and Flexispot teamed up to make this a commercial product, I'd save up for one like it was a new car or something
It would probably cost as much lmao
i wouldn't pay corpa hacks a dime for this. diy or pay the guy. no corpo zone!
@@unionxenon worth it
anyone but corsair they are super expensive, he could have went with different fans and saved a lot!
Why corsair? The only thing from them are the fans lol
I’m amazed by how well you’ve planned what cuts you had to make and how to arrange everything so it comes together so seamlessly when building it. I mean I don’t see another way to do it than planning ahead, you couldn’t just cobble it together, but the complexity of it makes that an impressive task to have executed so well !
The build is obviously insane, but as someone who hates ads and sponsor messages, the flexispot sponsorship is the ONLY time I've ever been charmed by sponsor integration. Part of it is how well the sponsor goes with the build, but the presentation is fantastic as well, not just an afterthought tacked on in the middle for revenue. Bravo
Came here to say exactly this. Clever and inoffensive advertising.
Thought this too. Only time I've never fast forwarded through a sponsor ad.
Look for iSponsorBlock it auto skips in-video ads for you automatically
Blacktail Studios also did a sponsored spot recently, and that desk turned out beautifully, too.
Agree. Also I've got one of their desk mechanisms (had it for 3 years now) and it works really well, would recommend.
No other RUclipsr would have discussed the heating issue and instead called it a success. Kudos to you for being more forthcoming.
Yeah but he was actually building viable pc to use himself not just project to show off
@@Raderade1-pt3om and it's likely the build he's using for editing, as it contains massive amount of NVMe SSD storage, even tho he could probably build an invisible and completely silent NAS server with insane compute power and storage, maybe with a server CPU, like the most powerful AMD EPYC (9654P) that has 96 cores and 192 threads, which alone can be tricky to cool down with it's 360W default TDP, then all the drives, which requires some cooling as well
sure, a NAS server does not require a GPU, so it might not require a massive cooling solution like the desktop PC, but some airflow for the drives and a good enough cooler for the CPU, that's all he would need, and if it's running a local VPN with port forwarding for it to work, he could essentially connect to it with everything he owns for "unlimited" private cloud storage (it's easy to setup and use Nextcloud and OpenVPN, which are 2 good services for selfhosting)
I get what you're saying but they would. Like heating and cooling are some of the biggest concerns with any pc build and pretty much all of them do discuss it. Benchmarking and temperature results are major components of the pc crowd.
OMG! This is the first time I see someone build a really invisible PC, not mentioning that your setup really only has the power cable connected to the desk. Almost all attempts have a few cables showing somewhere.
You should do consulting to big companies and work for R&D or product development. Your vision is extraordinary. And yes, this was one of the best well finish work you have done.
I love how this channel goes over some fairly complex concepts but breaks it down into little understandable bites that eventually produce these engineering masterpieces. I also love that even all the brackets look cool because they are made from aluminum and brass
As an engineer stuck in a corporate world, Matt and this channel pretty much single handedly got me back into my passion of creating. Completely changed my life!
My end game desk suggestions: Wireless coil charging embedded in the keyboard platform with corresponding wireless kb, mouse and phone charging. I'd love to the keyboard platform routed out so the desk pad locates perfectly - maybe with magnets? Fan shroud with plenum to hide the fans and quiet them even more. Have a nice matching handle made for your magent in the same wood and finish as the table, and clad bottom with velvet. AND WHERE ARE THE LEDs?
I hope everyone likes this comment so he sees it. Great ideas.
The LED’s are right where they belong, not on the build.
think of all the FRAMES he's losing from not having RGB!
how are you going to put a coil if the frame is made of aluminum?
@@gonsanbo In between. The wood cover and aluminium. Or to make another cut into aluminium.
11:36
''Behold... BRASS!!''
''But DIY Perks... this is the 7th time you've used brass in your project''
Yeah i also noticed that this lad does love his brass 😹
well...we've yet to discover vibranium :P
@@rzkrdn8650 the same as cooling systems, I think there is no a single project that he made without adding a fancy cooling system XD
Super awesome build! Ty.
@@angellestat2730 "Today we're building a normal desk with nothing fancy or special about it. Let's start with the cooling system."
DIY Perks: Endgame. The much anticipated sequel to DIY Perks: Infinity War
DIY Perks has truly jumped to a whole other level! Not in a bad way in comparison to his previous projects. Just with time there’s been no shortage of remarkable progress! Great job! I mean that wholeheartedly!
You've already set the bar so high but, this is completely a whole new level Matt. Incredible. "Shut up and take my money" memes flying around right now.
If this was ever on sale i would buy it no matter the cost!
Every time I forget that DIY means "do it yourself" and think it means "stupid lazy creation," you post a video to remind me of its meaning and how masterful it can be.
Yea... you could totally reproduce this diy with an engineering degree, an endless budget and a wood working father. Totally doable for the average person.
looks like someone doesnt have a father, a engineering degree AND the budget; which isnt even that hard to lower since hes using ultra high specs...
Yeah those other “DI-WHYyyyyyyyy” videos are definitely ruining the acronym
@@Lamster66 It's OR not AND too. ;)
trust me you dont need an engineering degeee for this, the stuff you learn in an engineering degree does help, but it isnt vital at all.@@balsalmalberto8086
This desk seriously needs to become a commercial product! I know it would be expensive, but I'd be so willing to pay a silly amount for this!
My only thought after the video has been, "It sickens me to live in a world where a product of this cool factor isn't standard."
Like, damn. I wish you could go down to your Best Buy and grab the newest Desk with Invisible Monitor & KB&M Compartment like any every day product. It's just so practical. Saves so much space.
Yea, would end up costing 10k+, but if i was rich i would totally buy one. Its literally the dream setup for anybody.
“Desk PC Cases” have been an idea for a while but they’ve failed to capture market share.
@@JC-Alan are some of them like this?
Most of the ones I've seen have been "gamer" focused with rgb and a glass top that shows everything. Basically the opposite of this.
@@htsunmiku TBH, no, most are gamer focused like you said, but that's not what prevents them from gaining market share. It's that they are an absolute pain in the ass to move. And people move a lot.
Your dad is a really cool guy. I respect him for his hard work and for raising such a cool son!
Love the video and project!!! Just wanted to say you should put a cloth/velvet under that magnet to stop it from scratching the wood with repeated opening and closing
This is actually unbelievable. 10/10 video. Probably the coolest PC on YT.
0:25 already hooked. looks bloody fantastic
My jaw actually dropped
@@n8mo came here to say the same thing. i was like WHAT THE....
I'll be mad if this isn't the first result when people google "desk pc". The bar is now set way high.
Channels like this give me hope for the DIY space. Ive been thinking about building my own desk out of spare desk and while i wont be building this type of build it still gets me existed to try.
52c during furmark at 400rpm is insane until u realize how much effort you put into engineering it. This is a sick system.
Man still fucking insane even when u realise the amount of effort
And that cooling solution is exactly why you should test before putting everything together. Thank you for being open with your mistakes and letting us learn from them.
I mean, he had to put everything together to test it out because that's probably when the actual air flow restriction hit. Sure, glueing the wood could have been put for later, but looks like the wood never came in the way of disassembly.
and that's something he can fix for the next generation 🔥
This is so freaking cool!
Honestly, a more affordable version of this would be great for dorms and small homes! A workspace during the day, a table for eating, homework and fun at night… or a table for crafting and work all in one!
The lift mechanism is really something… your builds are getting more and more impressive!
Honestly for practical application it is just easier and cheaper to have a Laptop instead of a desktop PC. It is portable, can be used anywhere (also as a Television replacement) and stored out of sight if not in use.
Laptop ma dude. Buy a laptop. This is for people with moneeyyy to waste
@@vebastiansettel1173 @LizZard1988 a laptop wont get you desktop level performance.
Fun at night...
A solution to embed a laptop on a desk with a screen maybe than?
Wow. An absolute joy to watch such craftmanship, epic end result and big props for fixing the cooling issue right away.
This is one of the best things I’ve seen within the computer space. I’m completely blown away by your ingenuity and troubleshooting. Desk looks absolutely incredible. Bravo
Nothing makes me happier than seeing DIY Perks flash on my screen with another banger. Thanks for all you do!
same
I have rarely encountered envy in my 28-32 years of life, but right now I am seriously beside myself admiring your craftsmanship and ingenuity; the finish of this project is maddeningly brilliant!
Dude not sure how old he is 😂😂
I have commonly encountered people in my life who don’t understand the difference between jealousy and envy. One involves three parties and relates to fear of loss, the other involves admiration, with a desire/aspiration to have what somebody else has, or be like them. One is exclusively unhealthy, the other is generally healthy. They are not interchangeable terms - jealousy can lead to envy but never the other way around.
@@X22GJP
jeal·ous
/ˈjeləs/
adjective
adjective: jealous
feeling or showing envy of someone or their achievements and advantages.
They are interchangeable terms.
Ask mom for a copy of your birth certificate 😊
Man is -4 years old
I hope the knees don't get frost bite while playing on the PC😅 25:27
I was hoping for a motorized opening system with a push of a button, but that magnet is actually so elegant that I fell in love with it. That build is so sick.
Hidden button underneath the desk lol
Maybe if the button was flush in the wood, but even then, a strong magnet is way cooler. Essentially a key that you have to know about. You can find a button relatively easily....
that can be done easily. just put some dc motor with big ratio gears on the sliding rail and hidden button somewhere and donediggitydeal
there aren't many channels that can make me watch a ~30 minutes video...
this was incredibly satisfying to watch.
you sir, are an artist.
I really admire the fact that you still left in the clips of the original cooling system even though it didn’t work well
Wasn’t expecting much given other iterations I’ve seen. But this one has to be one of the cleanest by far! Great job 👏🏻
400 rpm on the fans is amazing! That final shot of the heatsinks is so awesome. Love it! Great work.
You really never cease to amaze us.
Honestly, the desk is deep enough, so the extra fans at the back sticking out will likely NEVER be a problem.
Sure, you might have to clean them a bit more often without a mesh in front of them, but they're relatively high up, and don't suck/blow as hard even.
Your projects always reach such an incredible level of fit and finish. They manage to be stylish without being snobbish, unassuming, but not boring, and sleek, but not edgy. And everything manages to work elegantly. A lot of DIY content either has really complicated, technical skill requirements or is held together with zip ties and hope and looks like it probably broke the second the camera was turned off. Your projects always have such wonderfully elegant solutions to all the little problems you have to solve that manage to seem doable by an averagely "handy" person with regular tools and skills without being a janky mess. Incredible work.
I'm in such genuine awe of this build right now, it makes me wish I could go out and buy one, cause I know that if I tried to build that lifting mechanism, I would get to the third failed iteration and just have to put the project down. I wish I could buy the things you make so much
I'm not gonna lie, I don't understand half the shit you film, but you still make it completely enjoyable to watch. The film quality is so aesthetically pleasing.
I can't believe this man keeps coming with the most awesome product ideas. This man needs to be on the MKBHD podcast for real
The most impressive part of this video is that someone finally found a practical application for that Corsair monitor
Wish he integrated the flexible capability somehow too. Or did a triple.monitor setup
I just found this channel and im never letting it go. Amazing work, incredible effort!
I love how calm he is. Any other youtuber would hype you out with a cool looking pc which comes no where near this build or any of his build. Love you Matt you help me go calm too.
This was a beautiful build that could be even better with a couple small enhancements. First, replacing one of the gas struts with a small linear actuator would make the opening and closing automatic, controllable by the same panel as the table lifting mechanism. Second, you could opt for only one layer of heatsinks and use 90mm fans instead and I bet the cooling performance would be equally as good. If you're not already using high performance thermal paste to interface between the brass rail and the heatsinks, that might also help too. This really inspired me to think about building one of my own versions of this desk and the kind of features I'd like to include. Nice job!
This is beyond excellent. You sir, have prove yourself to be the best DIY creator of all time. When I read the title of invisible PC and saw the thumbnail, I thought he hasn't hooked up the monitor yet but I had no idea that it is in the desk itself. This is one of the best PC builds I have ever seen.
EXACTLY!! When he first flipped it open I was floored!
Anxiously waiting for your future videos. Love your designs and your construction techniques.
I wish you gave schematics for it. I absolutely love this. Imagine hiding the whole pc instead of alt+tabbing when your parents enter the room lol.
"Are you winning son ?"
Me, standing in front of an empty desk: 😮
The smoothness of the way the monitor rises and the underlying desk also rises into place is so satisfying! Amazing work as usual from Mr. Perks.
Waiting for “Today on DIY Perks, we will be using galvanized square steel, eco-friendly wood veneer, and expansion screws to build a suitable living area for little John and his 1 millions kids.”
ngl he used eco friendly wood veneers here
John isn't a muslim so don't worry about that.
@@abeginnerspov5968i know islam permits polygamy, but I've never heard a stereotype about muslims having many kids. The stereotypes I've heard is usually referring to Hispanics or those of the indian subcontinent (majority hindu)
that's not funny anymore..
@@X_manonot wanting kids is mostly in hyper-individual/western cultures where family/community support is not encouraged and promoted by the society. Hard to want kids when even 2 incomes is not always enough to make ends meet and childcare costs an arm and a leg.
❤❤ Love it! Great work and inspiring to see! Stage II -use a hidden or under the table projection TV display as your monitor, and a hidden in ceiling laser projection keyboard to shine on the desktop, and a counter sunk touchpad or and you'll have a truly invisible PC!