How To Fix Small Keyboard Key - Lenovo Thinkpad
HTML-код
- Опубликовано: 22 авг 2024
- Use this video to help you remove and install a keyboard key for your Lenovo Thinkpad laptop computer. If you wish to see how to replace a large key such as Enter, Space, or Shift, view this video instead; • How To Fix Large Keybo... . Check out the FAQ's and Related Video Links below !!
Please remember to Like, Share, and Sub if this video was helpful :)
To Donate, feel free to leave a Super Thanks by clicking on the Heart Button under the video.
Related Video Links:
Get Great Games at Humble Bundle: www.humblebund...
Computer Repair Tools & Supplies: www.amazon.com...
FAQ's:
Q: My Key Cap will not click down in place correctly. Whats wrong?
A: If the key assembly is not installing correctly, its either due to a component being damaged and needing to be replaced or a component not being orientated correctly. I would remove the key assembly and check for damage. If damage is found, replace the assembly. If no damage is found or you are unsure, try to install again. For help with the orientation, I sometimes remove another key cap, and compare the hinge clip to the one I'm trying to install. If you cant install after several tries, the key assembly is most likely damaged and needs to be replaced.
Q: The Retainer Clip is not staying down on the Keyboard.
A: If the Retainer Clip is not fitting into place, there are a few possible reasons. The Retainer Clip could be damaged and not able to fit in correctly. The Retainer Clip may not be assembled correctly or not orientated correctly. Or the the metal pins on the Keyboard are damaged or bent out of place and not able to fasten the Retainer Clip down properly.
Q: Where can I purchase replacement keys?
A: If any part of the key is damaged or broken, you will have to replace it. I usually get my keys on Ebay or www.replacementlaptopkeys.com. If you cannot find a loose key for sale, you may have to purchase a keyboard and take a key from there.
Q: I have a Key or Keys that are not working. Will this fix them?
A: This video is a tutorial on how to replace a key. If your keys are not working but are not mechanically broken, troubleshoot them as seen here; • How To Fix Troubleshoo... .
Q: The hinge clip came apart into two pieces. How can I reassemble?
A: They fit together with a small plastic pin on the left and right of the inner clip. These fit into holes on the outer clip. To see exactly how the inner clip sits in the outer clip, remove another key cap and copy the clip under it.
Q: The rubber spring came off. How do I reattach it?
A: There isnt really a good way to reattach those. They are not meant to be replaced. Best advice is try to use a small amount of glue. If that does not work, you may have to replace the keyboard.
Q: My Key Cap came off but the Retainer Clip is still attached. What do I do?
A: Because they key can usually not be reinstalled with the Retainer Clip and the Key Cap still attached to each other, you would have to separate them as seen here, using a small flat pry tool.
Thanks for watching! Please consider subscribing to my new channel here: www.youtube.com/@jamminpcs.
I'm trying to move the easier hardware stuff there so that I can focus on the more in depth troubleshooting and diagnostic videos here :)
no BS. Just simple instructions delivered clearly. Well done, sir.
Thanks !! Glad this video was helpful :):)
HI BROOO I AM FIRST, MY LAPTOP FELL AND KEY WENT OUT... NOW I CAN FINNALY FIX MY COMPUTERS KEY, THANKS SO MUCH YOU ARE THE BEST!!!
Happy to help :) Always here if needed !!
This vid can be used to swap the physical Fn and CTRL keys on the ThinkPad P16s Gen2. Life Saver!
Thanks !! Glad this video was helpful :):)
Thank you for this. My cat walked across my Backspace key and loosened the top cover off of it, so this was helpful in putting it back together safely without damaging it! :)
Glad your all set :):) Always here if needed !!
I have a thinkpad wireless keyboard and this tutorial helped where the inner clip was loose! Thank you for the well articulated explanation
Glad your all set :) Always here if needed !!
Great tutorial, once again. This is impossible until you know the technique... then it suddenly seems very easy!
Happy to help :) Always here if needed !!
Perfect tutorial on how to handle/replace these rubberdome keys.
I used it to (also) physically switch my FN and Ctrl keys on my Thinkpad T16 G1. Worked flawlessly without breaking anything.
Thanks !! Glad this video was helpful :):)
THANK YOU SO SO SO MUCH!! I CLEANED UNDERNEATH A KEY AND DIDNT KNOW HOW TO PUT THE BRACKETS BACK TOGETHER AND THIS HELPED ME A LOT!
Great to hear !! Always here to help :):)
Thank you so much! It look me a little while because the actual clip was broken in two but once I figured it out I got the key back in!
Great to hear !! Always here to help :):) Nice job sticking with it! Keys can be super frustrating !!
Wait I need help if the clip thing that he took out once mine broke into 2 is it still fixable?
@@spamacc7671 They fit together with a small plastic pin on the left and right of the inner clip. These fit into holes on the outer clip. To see exactly how the inner clip sits in the outer clip, remove another key cap and copy the clip under it.
My toddler thought my "V" key looked appetizing. Thank you so much for this video!
Glad your all set :) Always here if needed !!
Hey bro once the white piece is broken is it still fixable?@@PC_Monkey
@@krixdainsleifperdido6760 The hinge clip? How is it broken? If its just apart in two, it can be put back together. If its actually broken, it needs to be replaced.
Thank you so much for the tip with pressing the hinge down while removing the key. Saved me a key replacement.
Happy to help :) Always here if needed !!
Thanks man for explaining in so detail about those switches.. I literally broke one and panicked cz I thought its not fixable. but after watching ur video I was able to fix it.
Glad your all set :) Always here if needed !!
Thank you for your video! I was able to fix my Z key in less than 10 minutes. Works perfectly!
Happy to help :) Always here if needed !!
Thank you so much! I was worried that I've broken the keyboard, but it's all good now!
Glad your all set :) Always here if needed !!
Broooooo thank you so much, I had to return a school chromebook when one of the keys stopped working, so I took it of and that still didn't fix it, so I tried putting it back, but I couldn't. You are a life saver.
Happy to help :) Always here if needed !!
Thanks for the instruction video! It was well done, & helpful!
My Lenovo W530 "A" key cover popped off. Using the instructions you provided to remove a Key, I checked & put the "S" key cover over the "A" position to see if the clip was damaged. The "S" key popped right on and stayed in place. All I need to do now is order a replacement "A" cover and go from there!
Thanks again,
Mo-
Happy to help :) Always here if needed !!
Thanks a lot, my office laptop button fell out and your video saved me a lot of time.❤
Great to hear !! Always here to help :):)
My ideapad H and G keys is not working most of the time. Your video is close enough and explanation is clear. Managed to take only H key cover out and brush clean and swab to clean even though it’s not very dirty. Power on then both key works even I just took out H key only. Thank you!
Glad your all set :) Always here if needed !!
I took out my letter H cuz i was bored then got really nervous I accidentally broke it but this video saved me the stress lol
Taking off computer keys cuz your bored? lol
Glad your all set :) Always here if needed !!
Oh gosh thank you so much
Me and my brother were panicking cuz he broke it and if mom knew about this we would have been dead by now
I was scared to take out the white part cuz it might break
So I tried without pulling it out
And it somehow worked!
Great to hear !! Always here to help :):)
the key doesn snap in, but it keeps falling out
If your Key Cap is not clicking down in place correctly, it is most likely due to the Retainer Clip not being properly installed or damaged. Remove the Cap and inspect for damage or that its not laying down flush and properly snapped in itself. Compare to another Clip if needed by removing another Cap.
Thank you so much! This Video is still helping people like me even though it was posted 3 years ago! Thanks!
Great to hear !! Always here to help :):)
Thank you! I work for Lenovo - had not done this for a while and needed to be reminded. Great job!
Happy to help :) Always here if needed !!
dont know what i did i just ripped it out with a metal ruler before watching this vid but you helped me put it back in so ty
Glad your all set :) Always here if needed !!
Great! Thanks a lot. You've resolved my problem with how to get the key back in.
Thank you :)
Great video - short and easy :)
Glad your all set :) Always here if needed !!
Thank you very much! I accidentally pooped off the M key while cleaning my keyboard. This really helped!!
Great to hear !! Always here to help :):)
Thank you very much, my laptop key fell out and this video really helped. Thanks!
Great to hear !! Always here to help :):)
@@PC_Monkey i have a question what do u do when the whole keyboard isntworking?
@@ghostkillerx9290 1. Remember to check the FAQ's first if you have a question. It could save you time waiting for an answer :)
2. This video is a tutorial on how to replace a key. If your keys are not working but are not mechanically broken, troubleshoot them as seen here; ruclips.net/video/wqrchfpdJ_w/видео.html.
You just saved my day!
A piece of chocolate found its way beside the key and it was stuck. I opened it rather carelessly with a knife and the mechanics jumped out. This worked well for all my earlier notebooks. Fortunately nothing was broken. Putting things together was not that easy. First clipping the mechanics onto the upper metal pins did not work, perhaps I bent the pins during removal or trying to press down the mechanics. But in the end I carefully lifted the lifted pins into position with a screw driver and then I could simply clip it in again. Fazit: Make sure the clips are in the right position before pressing down the mechanics.
Glad your all set :) Always here if needed !!
THANK YOU SO MUCH, the 2 small parts were disconnected and i didnt knew it, now i connected it and then inserted it i finally putted the key back (i had a bread crumb under the key)
Glad your all set :) Always here if needed !!
Fantastic! Beautiful, detailed guide. The procedure worked perfectly to repair a loos key. Thanks!
Happy to help :) Always here if needed !!
Perfect, straight to the point video. All the important pointers and tips highlighted. Thanks,
Thanks !! Glad this video was helpful :):)
Totally.. The video explains everything in detail. It's awesome. I fixed CTRL key that my 2 Yr old son took off from my work laptop. Saved! 😅😅😢
Glad your all set :) Always here if needed !!
Thank you. Took me a while but I got it now. Lifesaver ❤
Glad your all set :) Always here if needed !!
thanks a lot!!! - also helped me with key replacement in ASUS X515EA - exactly the same mechanism
Great to hear !! Always here to help :):)
Thank you very much, i can reuse my keyboard, causing my child. after watching this video make easy to refair my "P" key. tengkiyu, tengkiyu tengkiyu very very very much...
Glad your all set :) Always here if needed !!
This helped me a ton! Thank you!
Great to hear !! Always here to help :):)
Thanks! Got lucky pulling out the Ctrl key before I saw this video, but followed your tips on putting it back, quite appreciated!
Happy to help :) Always here if needed !!
It worked! I was going nuts. Thanks :)
Happy to help :) Always here if needed !!
thanks bro, I got impulsive and took one of my keys out. I thought i broke it once I saw that the clip was separated but I was able to fix it up again with the help of my sister.
Great to hear !! Always here to help :):)
This was helpful! Took me 30 seconds thanks to you, thank you!!
Happy to help :) Always here if needed !!
Thank you very much for this instruction. I searched first in my own language, but the results were full of information garbage and completely on the wrong types of laptops with different keyboards. Then I decided to search in English and found your video.
I bought a laptop of the same model range from a local classifieds site (used but in good condition) and after a few days my D key crumbled. It turned out that the carriage was damaged, just in the middle where both parts connect, it was broken off "mustache" (pin). I had to swap with some other key that I use the least. And there was just completely torn off the rubber key, this silicone "tubercle" (boob), and this problem had to be solved using thin double-sided tape. Now the key is pressed very tightly, but at least it works like that.
After a short time, a similar problem arose with two other keys. One just falls out periodically from a light touch.
Damn Lenovo engineers! The keys on this laptop are impossibly delicate and fragile. Is it because of one damaged key that it is proposed to buy and replace the entire keyboard, with disassembly of the entire laptop? Very stupid move by the company.
And the very delicate plastic of the laptop case itself, scratches and crumbles like plasticine.
Yes, keyboards are usually not designed very well :(
I back!!!😉 and I watched another vid it fixed it lol best regards
Goober!!!peace out
Glad your all set :) Always here if needed !!
Thank you so much i legit thought i broke my dad's new laptop lol 😭
Glad your all set :) Always here if needed !!
thanks man, just fixed mine right now. Gracias!
Great to hear !! Always here to help :):)
Very well explained. Thank you.
Your welcome !! Happy to help :)
Thank you - this helpful video explained to me why I broke the plastic clip below the S key (i was trying to clean under it) on my Thinkpad P1 by removing it incorrectly. While replacing it with a new clip though I tried several times unsuccessfully to follow the instruction at 4:00 which is to snap the bottom holes of the clip into the bottom pins first and then the top holes into the top pins. Looking at it through a magnifying glass I realized that the top pins are hooks pointing towards the screen. So I tried it in reverse which was to hook the top holes in the clip around the top hooks and then the bottom holes quickly snapped into place.
Thanks man i thought ima have to live a no p key life
Happy to help :) Always here if needed !!
thank you!!!! I didn't see the bottom pins (3:49) when I tried repairing mine and (surprise) nothing worked. thank you!!!
Happy to help :) Always here if needed !!
Thank you so much omg your my life saver!! Haha, im stress when my keyboard K,L pop off because of my cat 🤣, thank you so so much!!
Glad your all set :) Always here if needed !!
So ive tried putting my alt and smaller control keys back on after they snapped off and I've check and they arent broken at all from any pieces but when I try to put it back on (the key cap) how you did and when I try to press down the key they just slide straight off right after, is there any way you could help?
Im having the same problem did you fix it?
These instructions worked for me.
the retention clips are such a pain to get back together! I've literally never been able to get one back together without breaking it until today. Great tutorial! (though, it doesn't show how to put back together the retention clip, but after figuring it out I get why... camera angles would be painful!)
Glad your all set :) Always here if needed !!
THANK YOU.
Your welcome !! Happy to help :)
wonderful stuff ^^ many thanks for making this video :)
Happy to help :) Always here if needed !!
My e key will be eternally thankful to you good sir
Happy to help :) Always here if needed !!
thanks that was really helpful :) !
Great to hear !! Always here to help :)
Hi, thanks for the video. I was able to replace the "N" on my son's laptop. I'm now having an issue with the "N" repeating "nnnnnn..." the up-and-down action on the keep seems fine and doesn't appear to be physically sticking. This issues doesn't happen all the time and sometimes tapping the "N" will stop the problem. The key does appear to be a little more depressed than the other keys on the keyboard. Is there a way to adjust the key so this issue will stop? Thanks!
Thank you. In my case I just needed to remove and reset the "\" key. It is hard to press and get input.
Glad your all set :) Always here if needed !!
Thank you so much, this was very helpful!
Happy to help :) Always here if needed !!
Am I the only one who just switched the Fn and Ctrl keys?
I watched this video so that I could interchange my keys. I was tired of being borrowed my laptop every other time. FYI, most of them borrowers aren't touch typists. They end up returning it immediately. 🤣🤣🤣
(I don't have a warranty, so I could do as I wished)
🤣🤣
Glad your all set :) Always here if needed !!
video solved my problem, well explained, thanks
Glad your all set :) Always here if needed !!
Super helpful! Thank you!
Your welcome !! Happy to help :)
aye good tutorial I managed to get the piece of salt from under my E key
Great to hear !! Always here to help :):)
Very helpful and very clear, thank you!
Happy to help :) Always here if needed !!
thank you brother you help me a lot
Great to hear !! Always here to help :):)
such a life saver thnx man
Your welcome !! Happy to help :)
Great! Easy fix for me ! Thanks so much!
Happy to help :) Always here if needed !!
Thank you so much for the help
Your welcome !! Happy to help :)
Thanks bro.
Your welcome !! Happy to help :)
thanks. You saved me.
Happy to help :) Always here if needed !!
Bro u saved my life
Glad your all set :) Always here if needed !!
You're a lifesaver. Thank you!!!
Happy to help :) Always here if needed !!
Hello, good tutorial. I just have one question ¿do you have any tutorial to help me replace key cap + hinge for Lenovo Thinkbook 14 keyboard?
Not for that specific model, no :( However, all keys are generally the same. If you get the concept of this video, it should help you remove and / or install any keyboard key. Is there a specific part you would like assistance with?
Thank you it worked! I have another problem, the numeric keypads are not working on the right hand side. How to fix it?
1. Do the keys feel like they are physically fine or do they feel like they have something mechanically wrong with them?
2. Also, did anything happen before this issue appeared? Liquid spill, overheating, Windows update, etc?
Thanks man it was so helpful
Great to hear !! Always here to help :):)
I broke my W and your video dint help😢
This video wont unbreak a broken key lol. If you break a key, it needs to be replaced.
Hey man, firstly, thanks so much for the video. My cat decided to scratch and damage + 4 of the number keys on the right hand side numpad on my Legion 5 Pro. I never use the numpad so it wasn't too big of a deal but I decided to buy replacement keys which also came with spare springs and retainer clips. I had trouble fixing them so I left it hanging for a while. I found your video again and decided to give it a try and it worked for 3 keys. However for one of the keys, the spring actually came off. I'm not sure if I wasn't being careful or because the clip was exposed for months, the glue weakened. What can I do instead?
Additionally, I have problems with some other keys as well which being W, Q and D. Those keys are much more important and it was affecting normal use. So I decided to call up Lenovo and since I had a Legion Ultimate support, I was being offered to get a free replacement of the entire keyboard INCLUDING the palmrest (which had gotten dark in some spots due to me resting my palm all the time). Unfortunately, because 4 of my numkeys were damaged, and that falls under user inflicted damage, they couldn't proceed with the keyboard replacement and I was really pissed. If I manage to get my keys fixed (3 are done, just 1 left) and contact them again, do you think its safe to let them do the free replacement for me if they don't remember from before? The keys and clips look pretty much the exact same. I'm not sure if thats a really dumb idea, and I don't wanna get into any legal trouble or get my warranty fully void.
Sorry for the long message.
This helped greatly! Thank you!
Great to hear !! Always here to help :):)
Thank you so much
Worked perfectly!!!
Great to hear !! Always here to help :):)
Thanks god! My "1" key works again
Great to hear !! Always here to help :):)
What can the reason be for the same key not working again now?
WELL THIS LOOKS BETTER VIDEO TO MAKE ME FEEL BETTER CAUSE A LOT OF DESTRUCTIONS IN KEYBOARDS ARE GETTING FIXED
thx :)
Hey man! do you know, you already saved me. lol
Happy to help :) Always here if needed !!
Thank you sir my 3 key works again !!
Great to hear !! Always here to help :):)
i dont know if youll see tis, but will this work for my "delete" key? i was using my lapotop, i didnt drop it or damage it in any way, i noticed the delete key was tilted a little, i touched it and suddenly the key popped out of place ..
Im not sure what you mean by 'will this work'. This is a tutorial showing how to remove a key and how to install a key. So I would install the key as seen here. If the key does not install correctly, it may be damaged. Inspect it for damage. If damage is found, I would then replace the key and then install the new one as seen here
Thanks for helping me not get grounded
Happy to help :) Always here if needed !!
Omg thanks u saved me a lot of time
Happy to help :) Always here if needed !!
Btw my key keeps falling out idk what's going on
@@MostafaMahmoud-ko7pd If your Key Cap is not clicking down in place correctly, it is most likely due to the Retainer Clip not being properly installed or damaged. Remove the Cap and inspect for damage or that its not laying down flush and properly snapped in itself. Compare to another Clip if needed by removing another Cap.
Thank you.. saved me.
Happy to help :) Always here if needed !!
This was close, but not quite, for mine (Thinkpad T480s). The 2 plastic pieces under the key behaved a little differently and needed to be held together then seated EXACTLY at the right spot. The the key on top had a pin on each side that had to be inserted, and THEN the magic press down to click the key into the plastic set and finally attached. Phew!
Glad your all set :) Always here if needed !!
I don't know if you are still checking this but I thought I'd ask for advice.
I need to reinstall my space key. I can easily get the 2 metal bars positioned. The top clicks easily but the bottom only clicks to the plastic key in the middle but not at the ends. Any suggestions?
Either the hinge clip is damaged, not orientated correctly, or the metal pins on the keyboard are bent out of place and wont allow it to snap in correctly. Those are the most likely issues
Wow this is amazing help thanks!
Great to hear !! Always here to help :):)
bro the last step is not working it gets popped out or remains pressed?
If your Key Cap is not clicking down in place correctly, it is most likely due to the Retainer Clip not being properly installed or damaged. Remove the Cap and inspect for damage or that its not laying down flush and properly snapped in itself. Compare to another Clip if needed by removing another Cap.
Thx a lot man, the z key had me stressing😭
Happy to help :) Always here if needed !!
So I have a lenovo Legion, key looks similar to the one on the video, my issue is that the key keeps falling off as I press it, when it comes off I can put back and it snaps into position, but then after a few taps as I type it falls off again... what can I do to fix this?
im having the same problem
@@fazolan2943, have you fixed it yet? I have a solution that I have worked for me greatly.
First, learn how to remove the key safely, including the clip that stays attached to the key itself.
Next, for the key that is bad, remove it and detach it from the plastic that stays attach to it when it comes off.
Then, choose another key in your keyboard that you do not use as much. For me, I chose F9.
The good key that you chose remove it as well, and also detach the plastic that is attached to the key.
Finally, switch those plastics that are attached to those keys and use the good one on the key that you use often, and use the bad one on the key that you chose that you don't use as much, and put the keys back together.
I used this method, and I don't even use the F9 key at all, so it hasn't come off. What I do suggest though, is to practice removing it with the bad key before you remove a good key. I really hope this helps.
soo i kinda broke the plastic that was holding it together is it fixable-?
Not if its broken, no. You would have to replace it.
My retainer clip broke and I was trying to put it back together for like 20 minutes. Out of pure luck, my last attempt worked and the two flattened down together again and I was able to put the key cap back on 😅This was my first time messing with my keys and I'm not messing with them again lol
Glad your all set :) Always here if needed !!
Thanks, very helpful!
Great to hear !! Always here to help :):)
This helped a lot, thanks! (Thinkpad TrackPont Keyboard II)
My two plastic piece came apart. The inner plastic. The little circle thing came apart from the square plastic thing that keeps the key locked in. Is there a place I can buy single replacements? For the letter T
I usually get my keys on Ebay or www.replacementlaptopkeys.com. If you cannot find a loose key for sale, you may have to purchase a keyboard and take a key from there.