Aye bro I’ve just discovered your channel recently and all i gotta say is that I love your CL7/9 set up. It’s almost the same set up I’m planning to have for my Euro R. Keep it up my g.
Thats a damn good deal for those skunk2's used or not. I just bought some new skunk2 upper control arms for 300$ and for the rear i got SPC's 5 pc rear camber kit (had to buy 2x sets, one for each side) my 06 acura tl rides a lot smoother after getting my alignment done.
Literally went to get my tires balanced yesterday because my steering wheel was also shaking lol. And thanks for the link to the plate light, I was also looking to swap my stock ones.
Firestylejutsu4 hell yeah, I been driving with a fucked up alignment for months and now it was even worse when I installed my camber kit LOL. Also np buddy, I’m glad I could help
Awesome video needing to install upper and lower arms too hopefully soon! Need to invest in some Milwaukee tools to help get those bolts out! That black accord that got rolled seems like the rear is buckling after the roll? Congrats on the job!
Chris Aguirre what part of it would you say the whole system? or could it be the rotors cause i really don’t know how to tell i’ve been looking up videos and everything
This isn't camber related but i installed an aftermarket radio on my 04 tsx with nav but when i turn on my headlights my radio turns off. Not really turn off but it turns sound off and says searching for signal. Is there a wire that needs to be hooked up somewhere and if so which wire. I got the wire kit but it turns my radio off
What radio did you buy? I've been looking for one for 04 tsx but the aftermarket bezel itself is like 200+, what other options is out there for these cars ? Any help would be appreciated. Thanks in advance
Before The Storm gotcha I might try to put some on my bushings because I have the same noise over bumps but on flat pavement.. so I was told it was my shocks but others saying my coilovers.. so idk there not the best brand (Godspeed) but decent and had them since March.. so still fairly new but figured I’d ask you what was causing your noise.. thanks again man
I used the Rust-Oleum Gloss Toolbox Red Spray Paint from Lowe’s High temp and haven’t had to give them a re touch for about a year already they still look nice and glossy 👍🏽
Mines LHD and auto, but it's a blast to drive and attempt to work on myself. Also working nights w/o a garage makes it hard to do big projects but I try to do what I can
First
Noah Blanchette DAMN WTF, YOU BEAT ME TO IT SMH 😂😂
@@BeforeTheStorm "Gotta be quicker than that." Geico. 🤣🤣
Cant wait to see that bumper painted, its gonna look sick!!!!
MadBeats 77 hell yes, ty homie!
Loving ur CL9 man, I have an 06! I'm in Australia and super jealous of your spoon front and mugen wing
Camber, White Wheels, Black Paint Job. Too clean bro, gives me mad Sonny’s RSX vibes.
Eli Neti thanks man, I’m getting some new wheels soon! Chrome lip and gunmetal face
Before The Storm Fire Bro 💯🔥
Loving the videos man, inspiring my Accord Euro Build here in Aus!
Gian Flores AUSTRALIA?!!! That’s awesome man, thank you for watching my videos :D
CL9 gang lets get it up....west sydney 2004 euro
Looks so clean man I’ve been a big fan for a while now I just brought my first car a Honda Civic 2007 coupe. Thanks for the inspiration
Jayovani hell yeahhh, thanks for the love man!
Aye bro I’ve just discovered your channel recently and all i gotta say is that I love your CL7/9 set up. It’s almost the same set up I’m planning to have for my Euro R. Keep it up my g.
Thats a damn good deal for those skunk2's used or not. I just bought some new skunk2 upper control arms for 300$ and for the rear i got SPC's 5 pc rear camber kit (had to buy 2x sets, one for each side) my 06 acura tl rides a lot smoother after getting my alignment done.
Literally went to get my tires balanced yesterday because my steering wheel was also shaking lol. And thanks for the link to the plate light, I was also looking to swap my stock ones.
Firestylejutsu4 hell yeah, I been driving with a fucked up alignment for months and now it was even worse when I installed my camber kit LOL. Also np buddy, I’m glad I could help
did you adjust the camber arms or did you just put em in and let the alignment shop take care of it
Ruthless? They did it for me at the alignment shop bro
Before The Storm thanks for the info was new about the camber arms cause I have Godspeed too on my 09 TSX
When you said my shit shaking at 80 mph I felt that 😅 I need to install my front control arms and get it aligned
Nice, car looks good, congrats on the job
kevin bailey thank you bro!
Ever gonna do a manual swap?
Saje G Maybe :)
Lookin hella clean!
Robert Vermillion thanks Robert!
You can always swap out the ball joints on the skunk2s
Awesome video needing to install upper and lower arms too hopefully soon! Need to invest in some Milwaukee tools to help get those bolts out! That black accord that got rolled seems like the rear is buckling after the roll? Congrats on the job!
Julius Pasion yeah, unfortunately the rear passenger quarter was buckled a bit. Thankfully it was just one side LOL
Before The Storm i got a solution *snip snip wide body time hahah
What exhaust and headers you got?
I'm in love with nina,great job on the upgrades, best decision you made for your tires.
Thats a hard ass tsx! Always wanted one but couldn't afford it
BTT T thank you!! I get a lot of compliments in person about the car too haha
4:40 no shit... 🙆🏾♂️😅😅😅😅
How many miles? Steering rack still factory?
Damn bruh when the cold air intake comin thru
Andrew Prakhin never, I have no fender liners and now a spoon bumper. It’s going to suck up all the water 😭😭
Before The Storm nah hood exit
Jzxp 100 this guy
Hey bro what side skirt/body kit do you have on this? Have my own cl7 euro r looking to do something similar
love your videos and i gotta question, i have a 2004 tsx and when i break at +40mph the entire car shakes, have you ever had this problem?
Jayden Otto thanks Jayden for your support and no I haven’t had that problem ever 😳
ur brakes are probably the issue
Chris Aguirre what part of it would you say the whole system? or could it be the rotors cause i really don’t know how to tell i’ve been looking up videos and everything
if you’re willing to change the rotor and caliper and break pad i would do that i recommend powerstop rotors and calipers on carid
Chris Aguirre okay imma look into it thank you so much
Are your front camber arms banging stock tower when you hit bumps?
I think it would look so nice with red racing seats
Suzurai thats the plan man!
I’m really close to buying coilovers for my ‘03 Accord, how are your F&Fs holding up? Would you recommend them?
Matt they are super bouncy but easy af to adjust and they go MAD low !
Na bro get Tein
Jayme Lanuza it’s funny you say that lmao
i just picked up a set of tein street advance z’s 😂
Matt should of got flex Z.... good luck re-using your OEM top hats
Jayme Lanuza i’d rather reuse the top hats of my 2 year old struts than spend $200 more on flex z’s
This isn't camber related but i installed an aftermarket radio on my 04 tsx with nav but when i turn on my headlights my radio turns off. Not really turn off but it turns sound off and says searching for signal. Is there a wire that needs to be hooked up somewhere and if so which wire. I got the wire kit but it turns my radio off
Olie Olson Ah hell nah, you should uninstall everything and redo it. You probably missed something
What radio did you buy? I've been looking for one for 04 tsx but the aftermarket bezel itself is like 200+, what other options is out there for these cars ? Any help would be appreciated. Thanks in advance
@@BeforeTheStorm i connected each wire to color code besides a green wire where there is no green wire on the kit besides the two for a speaker.
@@RaulLopez-rj3xb its a cheap ebay one with a Honda symbol on the start up screen when you turn it on.
Did you figure out what the noise was in the rears?
Trey yeah, I showed it in the video. The bushings were just dry and needed Wd40
Before The Storm gotcha I might try to put some on my bushings because I have the same noise over bumps but on flat pavement.. so I was told it was my shocks but others saying my coilovers.. so idk there not the best brand (Godspeed) but decent and had them since March.. so still fairly new but figured I’d ask you what was causing your noise.. thanks again man
Your tail lights is bad ass
EVERYONEHATESJJ you are badass
yoo what side skirt extension is that?
J Navarro they’re custom made by Pro Areo
Dope bro
what exhaust are you running?
Hey bro I’ve been interested in getting a Acura tsx are the insurance rates on these good ?
This video helped me take a shit today.thanks man
richardguerra1712 no problem homie!
GANG GANG
Damian Figueroa
Man, I wish I had people to work on my TSX with
Lovin the vids man! Do you plan on upgrading those rotors and painting those calipers btw? I feel that It'd really compliment those wheels!
Zombie yes sirrr, I want drilled and slotted rotars !
@@BeforeTheStorm that'll look sick, Can't wait!
what year is your tsx?
Aniel Kallideen 2008
okok cool man, love the vids. I just got an 2006 tsx mostly stock, thinking about getting some mods done
Paint those calibers red 👀
I used the Rust-Oleum Gloss Toolbox Red Spray Paint from Lowe’s High temp and haven’t had to give them a re touch for about a year already they still look nice and glossy 👍🏽
Ima go burnt copper 🥵
noice
Isaak Arrona
I need those rims sell them to me if you still have them
my heart broke when i saw automatic
God speed no good bro better watch that
Jon Put did it break on you?
50 bucks? I payed 300 😂😭
Jayme Lanuza SHEEEESH, my buddy got a pair in Japan for $20 lolll
Tsxy
Michael Tran SMOOOCH**
Man, I wish I had people to work on my TSX with
ChainedActivation you not looking hard enough;)
I have a rhd and it’s easy and fun by myself
Mines LHD and auto, but it's a blast to drive and attempt to work on myself. Also working nights w/o a garage makes it hard to do big projects but I try to do what I can
ChainedActivation true I be setting up lights and shit lmfao