Thanks for the vid! I ended up using a pump and a hose for filling the diffs back up! So easy that way. Im glad i had one laying around for my boat's lower unit.
Thank you. Check out my website I have all sorts of things for CFMOTO. Clutch kits, oil change kits, lighting, allot of cool stuff. Www.rngperformance.net
Greetings from Wisconsin! HOLY SHIT STEVE'S GOT HIS HANDS ON A BIG U!! LMFAO. I totally recommend getting that box right the hell outta the way. That air filter would've been a bee-itch with a rear window in it. Can't agree more with why ANY off road vehicle would come with a paper filter. I know you can't really promote aftermarket stuff not really cfmoto approved, but that spin on oil filter kit i put on turns the cartridge style to a 10 second spin on. Like you I've got the sausage fingers and these things are a pain trying to get to the fill holes and dipsticks. I made my own funnel extender with clear tubing just to get above the "dirty" stuff so I can easily hook my funnel to it above the top of the frame. That box is a big wide sumbich, they just need to be outta the way. There! I went full circle and came back to where I started. Made me smile when I saw you with a U! Careful. You might get hooked. Later, my friend. Well done!
That spin on oil filter is next on my list to do. Specifically on a UForce it’s almost a necessity lol. I want one super bad lol. Glad I got to do this video for sure.
@basketballa5950 wouldn't you check first before attempting the T50 though? Instead of trusting what his in the video was. Then coming back and blaming him for your mistake because you didn't first check that you had the right tool lol
Did you install an accessory power block under the hood for the light bars? I can’t tell what the box on the passenger side under the hood is? I have a 22 uforce 1000 and I’m looking at installing a busbar under the hood. Not exactly sure where to find key switch power at though…or the best/closest place to find key power anyway.
I use Auxbeam fuse box. Makes installing this stuff a breeze. Look on my channel for 8gang fuse panel from Auxbeam. If you like it email me or message me on Facebook I can get you one. I’m an Auxbeam dealer.
@@R.N.GPerformance That's not the answer I needed #RED. I guess its paper til they do.. Btw, it looks way better with all the upgrades I've done from roll cage and nice fender flares!!
I guess. But me I’ve always just piled the outside to keep that from happening and never had a problem with dirt getting past. Specifically with the outerwear filter.
I was told by a dealer that there was issues with the 800 cc you force is that true and should I stay away from that size and get them 2023 models either 600 or 1000 instead??
Heads up, save some dough, the first service doesn't call for diff oil service until 50 hours not during the 1st service at 20. On the other hand, valve lash inspection/adjustment is required at the 1st 20 hours. It's easy on the uforce, don't skip this very important maintenance.
Regardless of that the book says I fully recommend changing the diff fluids on first service to get all the shavings out. Fun fact. The break in period is 250 miles and that’s when you should adjust the valves. This particular machine only had 20 miles on it wasn’t even ready for any of it. But we wanted to do a video.
is the t50 what i would need for the 2023 uforce 600 ? i have .4 hours left before doing first service lol. oh and would you use Lucas Oil 10047 SAE 75W-90 Synthetic Gear Oil/Transmission and Differential Lube for the transmission ? as usual thank you for the help and glad you had fun on your trip but im sorry you got sick and hope you get to feeling better man . im sorry man i keep watching this and coming up with questions . those lights just screwed into the back brackets ?
I now sell uni filters. And they come pre oiled. rngperformance.net/shop/ols/categories/air-filters okay guys so I had a long day yesterday and had forgot to go over fluid capacities with you. so we will go over them here hows that? and by doing this its super easy for you to come right back to for reference. we will work from the front of the machine on back. Front Diff page 93 owners manual 330ML Trans Oil page 110 owners manual 0.6L or 20.oz Engine Oil page 108 owners manual 2.5L or 84.5oz Rear Diff page 93 owners manual 400 ML
I mess with main stream cycles in Mississippi they have some new front and rear arms for CF Moto 1000 and XL 1000 heavy duty they move the wheels farther in front you should check them out
😂. I can do that in a short simple story. Snakes, control freaks, CFMOTO Mafia, liars. Tell me if this sounds familiar. “ you can only buy it here this is exclusive “ then you turn your head and 40 other businesses have it for 200$ less. 😂 need I say more? 😂
What size Outerwears or model number is that? I don't see it on your site. I contacted them because they do not list CFMOTO on their site and they're asking for the filter size. Thanks
What about the grease they don’t add to the machine where they need it? Or all of the loose bolts they leave. I wouldn’t trust that theory 😂 paper filters suck they have always sucked lol
What size uni filter do I need? Thanks Red, really enjoy watching all you videos
Your welcome thank you brother. We stock uni for all the units. rngperformance.net/shop-parts-accessories/ols/categories/air-filters
Thanks for the vid! I ended up using a pump and a hose for filling the diffs back up! So easy that way. Im glad i had one laying around for my boat's lower unit.
How much did you put in the diffs
Really enjoyed this video.
Thank you Bigfella.
From New England Australia.
Thanks for sharing the oil capacities too..😊
Thank you. If you need anything we have it in stock www.rngperformance.net
@@bellrugby03 where’d you find the capacities
Awesome video! Super helpful in doing our first service .
Thank you. Check out my website I have all sorts of things for CFMOTO. Clutch kits, oil change kits, lighting, allot of cool stuff. Www.rngperformance.net
Great video steve verry informative
Greetings from Wisconsin! HOLY SHIT STEVE'S GOT HIS HANDS ON A BIG U!! LMFAO. I totally recommend getting that box right the hell outta the way. That air filter would've been a bee-itch with a rear window in it. Can't agree more with why ANY off road vehicle would come with a paper filter. I know you can't really promote aftermarket stuff not really cfmoto approved, but that spin on oil filter kit i put on turns the cartridge style to a 10 second spin on. Like you I've got the sausage fingers and these things are a pain trying to get to the fill holes and dipsticks. I made my own funnel extender with clear tubing just to get above the "dirty" stuff so I can easily hook my funnel to it above the top of the frame. That box is a big wide sumbich, they just need to be outta the way. There! I went full circle and came back to where I started. Made me smile when I saw you with a U! Careful. You might get hooked. Later, my friend. Well done!
That spin on oil filter is next on my list to do. Specifically on a UForce it’s almost a necessity lol. I want one super bad lol. Glad I got to do this video for sure.
Good job and lot done in this video! The UForce is cool 😎
Thank you. Yes sir whole day on this one lol.
How do like ur Uforce?
Also always loosen the diff fill plugs before draining
I always do that on every vehicle I do fluids on
reminds me I still have to do my trans and diffs
I wish u sold the pre screen bag for the air filter separately.
Nice #uforce 😀
What was the oil capacity
Why at 25:35 when you do a shot of under the hood? Why is the coolant level so low?
Where can I get the AIR FILTER OUTERWEAR - 2024 cfmoto UFORCE 1000 please?
Thanks for the t50 suggestion when it’s really an 8mm. Now the bolt is rounded and stuck
You should always double check before doing a job because parts are changed all the time. You can’t expect a video to be identical.
@@R.N.GPerformance you cant just admit it’s a 8mm hex socket and not a t50? 😂
@@basketballa5950 I changed my diff fluids today. You're right, Definitely an 8mm Allen wrench not a T50.
@@USAF33yeah pretty amazing people can’t own up to they’re mistakes and say sorry, instead no it’s our fault for following your instructions.
@basketballa5950 wouldn't you check first before attempting the T50 though? Instead of trusting what his in the video was. Then coming back and blaming him for your mistake because you didn't first check that you had the right tool lol
Did you install an accessory power block under the hood for the light bars? I can’t tell what the box on the passenger side under the hood is? I have a 22 uforce 1000 and I’m looking at installing a busbar under the hood. Not exactly sure where to find key switch power at though…or the best/closest place to find key power anyway.
I use Auxbeam fuse box. Makes installing this stuff a breeze. Look on my channel for 8gang fuse panel from Auxbeam. If you like it email me or message me on Facebook I can get you one. I’m an Auxbeam dealer.
Awesome, thanks. What’re your thoughts on fuse taps into the existing fuse box?
@@connorhardison4974 yw. They work but not always recommended. I’ll use them to power a relay for ignition power or something but not a light bar etc.
Do you have a video on a uforce1000 drive belt replacement.
I do. ruclips.net/video/ZxpWKdfhbHE/видео.html
Hey. Red. Time to change the stock spark plugs in my. 2022 u force 1000. Shud I run the same factory. Spark plugs. Or rim irridium plugs
Hello there. I recommend iridium much better plugs.
You’re spraying the uni air filter. What is in the can?
Filter oil.
What part # for the uni filter to fit the uforce 1000? Thanks
He won't tell you because he wants you to buy it from him. This guy is an a hole
I now sell uni filters. And they come pre oiled.
rngperformance.net/shop/ols/categories/air-filters
@@R.N.GPerformance lmfao $90 for a filter sorry not trying to make you rich 🤣🤣 what a scam
I have the ncc1701 D, Star ship enterprise.... Which uni filter for the 950? Not sure how to cross reference it. Nothing at MSC
😂. You can’t get a uni type filter for the 950 unfortunately. It’s because of the air box they used.
@@R.N.GPerformance That's not the answer I needed #RED. I guess its paper til they do.. Btw, it looks way better with all the upgrades I've done from roll cage and nice fender flares!!
@@sxsoutcast7651 yeah unfortunately it sucks man. That’s definitely a good thing.
Ive only ever oiled the outer wear uni filter on machines with great results not sure ive ever seen the inner oiled up learn new stuff daily
Quick question how about transmission fluid? And does the front and rear diff take same spec fluid?
Yes. And we do sell it on our website www.rngperformance.net 80w90 Lucas
Hey does the cforce 1000 take 80x90 in the diffs as well?? Thx@R.N.GPerformance
Just curious why does uni say spray inside all there 2 stage filters? And also their RUclips videos says do so also?
🤷♂️ but if you do it will gum up sensors and cause running issues.
@@R.N.GPerformance it’s a win lose situation lol
I guess. But me I’ve always just piled the outside to keep that from happening and never had a problem with dirt getting past. Specifically with the outerwear filter.
At least the uforce has better access for air filter the zforce is a pain ,relocating it to cargo box soon lol
Yeah I agree.
Do they sale that kit for 2021 zforce 950sport, I didn't see it on their website
Www.CFMOTOusaparts.com discount code REDNECK
I was told by a dealer that there was issues with the 800 cc you force is that true and should I stay away from that size and get them 2023 models either 600 or 1000 instead??
I’m not aware of any issues with them. I would get the one you like the most.
What is the uni air filter number, size etc for a 2022 uforce 1000?
I can’t recommend a uni filter because the filter they have is having fitment issues.
You never did show the oil filter replacement 🤣
Is that light bar a factory kit?
No
How to adjust valves for ALL CFMOTO Machines.
Is this necessary or is it fine without
Does CFMOTO have oil filters
Yes. We also sell oil filters www.rngperformance.net
Heads up, save some dough, the first service doesn't call for diff oil service until 50 hours not during the 1st service at 20.
On the other hand, valve lash inspection/adjustment is required at the 1st 20 hours. It's easy on the uforce, don't skip this very important maintenance.
Regardless of that the book says I fully recommend changing the diff fluids on first service to get all the shavings out. Fun fact. The break in period is 250 miles and that’s when you should adjust the valves. This particular machine only had 20 miles on it wasn’t even ready for any of it. But we wanted to do a video.
@@R.N.GPerformanceSo is first service at 200 miles or 20 ? I just purchased and want to know when I should do it .
I'm changing the oil and my u force 1000 won't take another liter .it only will take the first one
I need help
Are you putting it in the right tube? There are 2 1 for trans in front. One for oil in rear.
Y a I missed up.thanks for responding and all the great videos
Will the Uforce 1000 oil dipstick fit the Zforce 800?
Idk
I’ve heard you don’t want an oiled air filter when riding in dusty conditions. True or is that the opposite of true ?
That would definitely be false.
is the t50 what i would need for the 2023 uforce 600 ? i have .4 hours left before doing first service lol. oh and would you use Lucas Oil 10047 SAE 75W-90 Synthetic Gear Oil/Transmission and Differential Lube for the transmission ? as usual thank you for the help and glad you had fun on your trip but im sorry you got sick and hope you get to feeling better man . im sorry man i keep watching this and coming up with questions . those lights just screwed into the back brackets ?
I believe it is a t50 yes. The lights are just on the brackets. We use lucas I do sell it on my website www.rngperformance.net it’s all good buddy.
@@R.N.GPerformance awesome man thank you and will be on site this afternoon .
It's an 8mm Allen wrench/socket.
💪👊💪
I now sell uni filters. And they come pre oiled.
rngperformance.net/shop/ols/categories/air-filters
okay guys so I had a long day yesterday and had forgot to go over fluid capacities with you. so we will go over them here hows that? and by doing this its super easy for you to come right back to for reference.
we will work from the front of the machine on back.
Front Diff page 93 owners manual 330ML
Trans Oil page 110 owners manual 0.6L or 20.oz
Engine Oil page 108 owners manual 2.5L or 84.5oz
Rear Diff page 93 owners manual 400 ML
It's all good.. I watched the whole video in its entirety and I didn't even miss it, LOL. Thanks for the video #BIGRED
How to adjust valves ruclips.net/video/VCuHUyBhm_c/видео.html
@@sxsoutcast7651 your welcome 🙏
I’m just curious of where you guys are located at
I mess with main stream cycles in Mississippi they have some new front and rear arms for CF Moto 1000 and XL 1000 heavy duty they move the wheels farther in front you should check them out
Amsoil bud 😆
Sometimes.
Always
Shilling MSC in the video... I need to hear the backstory drama of the fallout to get caught up LOL
😂. I can do that in a short simple story. Snakes, control freaks, CFMOTO Mafia, liars. Tell me if this sounds familiar. “ you can only buy it here this is exclusive “ then you turn your head and 40 other businesses have it for 200$ less. 😂 need I say more? 😂
@@R.N.GPerformance Yup sounds accurate, thank you for the explainer haha - Overcharging for mrrpmcycle's product comes to mind LOL
i thought ya juist sprayed your armpits with the oil then just squeeze the airfilter in your armpit
That might work 😂
Just bought a uforce 1000 and did my break in service it’s garbage to self serve
Why do you say that? I find it very easy to work on.
Whats the braking for the first oil change?
We now sell uni filters and service kits www.rngperformance.net
What size Outerwears or model number is that? I don't see it on your site. I contacted them because they do not list CFMOTO on their site and they're asking for the filter size. Thanks
Looks like way too much oil on the filter
i knew you were a main street cycle real talk power sports fan boy lmfao amsoil better
😂 😂 😂 not hardly 😂
If paper filters were that bad CFMOTO wouldn't use them from the factory.
What about the grease they don’t add to the machine where they need it? Or all of the loose bolts they leave. I wouldn’t trust that theory 😂 paper filters suck they have always sucked lol