We need more videos like this: Simple and easy to understand videos for the stock aircraft for us casual fliers. I recently made one for the new AAU1 updated Cessna CJ4, and even it was nearly 2 hrs long just covering some of the changes for casual fliers to understand. DX
You are amazing. There are honestly other videos out there that show you how to set up the MCDU and far lenghtier than this one. None of them make sense to me except for yours (I am dense) Thank you so so so much!
covering literally everything i asked for in 5 minutes :D I don't need to know an hours long procedure about everything, i just wanted to knowhow i can set a Departure, Route and Arrival without having to exit to the main menu evry time! Thanks a lot!! Love it
Slight change in the latest update on the heading selector and how to engage managed heading, the little up arrow is no longer there. Cursor over the heading selector, left mouse click AND HOLD, and while still holding click the right mouse button. When you hold down the left mouse button there will be a menu that appear that indicates how to switch it in and out of this mode.
Thank you so much your so good at explaining it easy and everything now I finally know how to make a plan from the cockpit gives me the more realistic thank you so much
What happened to the vertical purple line that is transposed onto the MFD for your flight plan? It would follow the top (north) position of the instrument and make it easy to see where you're going, and what the next waypoint is?
I’m a 350 pound guy, which good cargo plane ✈️ would be best for big people to fly? I’m curious about being a cargo pilot and learning about read back to/from the tower? What’s an IFR? What’s the height and weight restrictions for flying a plane and helicopter?
This video is for casuals. You can take 5 seconds to look in the comments and see all the people who appreciated the video. You have to realize that not everyone who plays this game knows a lot about aviation. They probably don’t even know what a SID/STAR is.
Thanks for this. just a question, Is this on windows or XBOX. Also, what did you do to you start the flight on the main menu but not put a destination down and then just spawn at this airport? Only that's what I'm thinking you did and whenever I don't put a destination airport in at the main menu. It starts to load then crashes every dam time. Thanks Buddy. New subscriber here.
Ok good question here how do you add stops on the way to maon destination if you need to refuel or take a break i havnt figured this out yet spent a day trying to figuer it
Can anyone tell me why my mcdu on my flight plan shows me things like 'FL302' '16950' 'FL200B' & '12000A' where this video leads me to belive it should show consistant altitudes like 7000 -> 6500 -> 4000 etc... I have tried so many videos and I just cant figure it out!
Does anybody know how to reset or clear the flight plan in the mcdu? Not a return flight and not adding a third waypoint. Clear the mcdu like when you start the plane and before you put the flight plan in? How do you get the mcdu reset to that point?
I’ve recently been having this problem just after SU9 (On my Xbox series X) where navaids and approaches don’t show up on the world map or in the fms. Basically I can’t pick an approach for any airport, or a departure, it only shows direct.
I’ve been having major autopilot issues - I plan a flight in the world map using low altitude, picking sensible SIDs etc - and the A320 will just fly circles around a waypoint instead of flying to the next! Any advice? I’m on series X too
I play it on xbox myself but how come you can't press all the buttons. with the xbox this is due to the controller or you can just do more with pc in flicht simulator. wall with many buttons is not in use with me
@Svenskanorden1 Do you know how it works? I entered a flight from EDDM to LOWS in the MCDU manually as described with ILS runway approach. I started the AP1 but the plane didn't follow the flight path including the also (by itself) inserted waypoint and had flown direct to LOWS. Before (near the airport) I pressed the approach button on the FMC. The altitude was always 5000 feet from activating the AP and when reaching the being of the runway and the plane flew over the runway in 5000 feet and behind the airport, it crashed into a mid-size mountain. I think I have to try this again ;-)
thanks for not making a 2 hour video earned a subscriber
Damn right me too I’m so happy I can actually do this without opening the main menu I can run legs now
Ditto😊
Real and same
On this wagon, I’m in! Thanks for the advice
Awesome 👍🏾
Love the passenger commentary. Great sense of humor.
We need more videos like this: Simple and easy to understand videos for the stock aircraft for us casual fliers. I recently made one for the new AAU1 updated Cessna CJ4, and even it was nearly 2 hrs long just covering some of the changes for casual fliers to understand. DX
++++++++++
My guy went straight to the chase, thank you! I always went back to the menu and did it from there, now I can keep going form in game
in all my years of playing MSFS I've never known how to file my own flight plan. it's so easy! thanks!!!
so easy to understand, straight to the point. not a 25 minute video. im subbing
Thank you for this video! People usually upload an hour long video and you are straight to the point. Subbed and liked!
You are amazing. There are honestly other videos out there that show you how to set up the MCDU and far lenghtier than this one. None of them make sense to me except for yours (I am dense) Thank you so so so much!
New sub, you deserve much more for teaching this
Thank you for the easy step by step guide. No long video to confuse people 😃
I definitely chuckled at the intro😂
covering literally everything i asked for in 5 minutes :D
I don't need to know an hours long procedure about everything, i just wanted to knowhow i can set a Departure, Route and Arrival without having to exit to the main menu evry time!
Thanks a lot!! Love it
Wow... Many thanks from someone who has Always Struggled with MCDU.. Not Any More Sir!! Much Appreciated!!
Dude thank you for this video. Was trying to sort through YT and was finding 30 to 45 minute videos.
Thank you man you are the best you teached me only what I needed no trash talking,very fast you are just so good
this makes it so much more simple thank you
THANK YOU. i really dont need a 35 minute tutorial on how to use this thing. just something to casually get me from point a to b
Thank you! I’ve learned a lot, since my dream was to become a pilot!😊
It's my first day, and ATC's already screaming at us. 😊
Slight change in the latest update on the heading selector and how to engage managed heading, the little up arrow is no longer there. Cursor over the heading selector, left mouse click AND HOLD, and while still holding click the right mouse button. When you hold down the left mouse button there will be a menu that appear that indicates how to switch it in and out of this mode.
Hello I know it's been a while since you posted but is this in reference to the selected speed vs managed speed?
It doestnt working for me can you help me please
This tutorial helped me a lot. I don't give my passengers paper bags so they vomit all over the seat!
Thank you so much for a short and simple video.
Thank you so much your so good at explaining it easy and everything now I finally know how to make a plan from the cockpit gives me the more realistic thank you so much
Great vid easy and simple i cannot thank you enough you earned yourself a sub!
Simple and easy to understand, thank you
Super comprehensive. Great Work man.
Followed what ypu did but it won't show anything on map after flight plan, Idk
When i do Turn on my Ap1 It litteraly goes in A very Tight Circle and looses Altitude.
Bc you don’t have tcas on I’m pretty sure correct me if I’m wrong u can watch a tutorial on how to turn on tcas
You make it look so easy. I'm starting so..
Show those gamblers what’s good for them. Nice video.
Thank you very much! Just what I have been looking for 😀
thanks man. i finally understood
How can you get the two screens on in front of the captain seat (pov)
What does KLAS stand for after you pushed emit? Does it stand for Vegas?
This was super helpful. thanks.
The heading mode didn't help. The 3 lines aren't working.They appear and dissappear. Any tips?
Thanks for making a quick tutorial, btw how do you set the cruising altitude?
Thanks i like simple anf short videos
At least that take off cheered up the broke passengers!
thanks man easy to follow not like everyone🎉
What happened to the vertical purple line that is transposed onto the MFD for your flight plan? It would follow the top (north) position of the instrument and make it easy to see where you're going, and what the next waypoint is?
Every time I put it in, it says From User, how do I make that from my origin airport?
Hi can you plz do a flight plan for the think it is the A32N THE ONE AFTER THE NEO AND ALSO SHOW HOW TO USE THE AUTO PILOT THX MARK.
I’m a 350 pound guy, which good cargo plane ✈️ would be best for big people to fly? I’m curious about being a cargo pilot and learning about read back to/from the tower?
What’s an IFR? What’s the height and weight restrictions for flying a plane and helicopter?
Didn’t input a SID, no vref speeds, didn’t select TOGA, no AP, I could go on! What was the point of this video?
This video is for casuals. You can take 5 seconds to look in the comments and see all the people who appreciated the video. You have to realize that not everyone who plays this game knows a lot about aviation. They probably don’t even know what a SID/STAR is.
thank you very much you helped me a lot😊
Does it automatically put it in if you spawn it at a gate and you use it from the map?
Hi Im playing on xbox. It says not in database? Please help
Thanks for this. just a question, Is this on windows or XBOX. Also, what did you do to you start the flight on the main menu but not put a destination down and then just spawn at this airport? Only that's what I'm thinking you did and whenever I don't put a destination airport in at the main menu. It starts to load then crashes every dam time. Thanks Buddy. New subscriber here.
Very useful thank you
Thanks but what do I do if it says format error?
Can someone help with the heading managing everytime I try to set it it goes for a second
Nice tutorial, thanks.
Thanks Bro.. Helped me a lot
this guy is so underated hardest tutorial but very simple ❤❤❤❤ SUBED we need a turtorial for a full flight a320 neo make it simple 😍😍
If yk how do i find v1 vr v2 speeds and that good stuff
Ok good question here how do you add stops on the way to maon destination if you need to refuel or take a break i havnt figured this out yet spent a day trying to figuer it
Perfect Video!
Can anyone tell me why my mcdu on my flight plan shows me things like 'FL302' '16950' 'FL200B' & '12000A' where this video leads me to belive it should show consistant altitudes like 7000 -> 6500 -> 4000 etc... I have tried so many videos and I just cant figure it out!
Does anybody know how to reset or clear the flight plan in the mcdu? Not a return flight and not adding a third waypoint. Clear the mcdu like when you start the plane and before you put the flight plan in? How do you get the mcdu reset to that point?
How do you lower Altitude on the FMC Airbus 320 on MSFS 2020 because it will not let you.
this is not working now. how that automatically engaged the ATHR?
You have to set the throttle to Climb detent, or CL, for the auto throttle to engage. Maybe try that?
I did this and my plane just flew in circles around the airport :/
Very helpful video
Melancholic pilot 😅 love it
My man. Thank you
But how do you know the code of the airport
Search it up on google
Simbrief
I’ve recently been having this problem just after SU9 (On my Xbox series X) where navaids and approaches don’t show up on the world map or in the fms. Basically I can’t pick an approach for any airport, or a departure, it only shows direct.
I’ve been having major autopilot issues - I plan a flight in the world map using low altitude, picking sensible SIDs etc - and the A320 will just fly circles around a waypoint instead of flying to the next! Any advice? I’m on series X too
Great help THX!
Very good video!
Can’t you just use gps and nav? (I’m not a pilot and have no clue what I’m talking about)
I play it on xbox myself but how come you can't press all the buttons. with the xbox this is due to the controller or you can just do more with pc in flicht simulator. wall with many buttons is not in use with me
I play it on xbx, and I plug kaybord and mouse... It's nice but 20 min to programe touch.
@@Wolf_Gaming563 top👍
my god that was easy!
very nice
Great video
Whats wrong if you write KLAS/KORD just as you did and you get the response "Not in database"?
Just click clear down the bottom delete all what you typed in and type it again
I had exact same issue and that fixed it
Thank you
Problem is that it doesn't work on xbox cause its default a320
@Svenskanorden1 Do you know how it works? I entered a flight from EDDM to LOWS in the MCDU manually as described with ILS runway approach. I started the AP1 but the plane didn't follow the flight path including the also (by itself) inserted waypoint and had flown direct to LOWS. Before (near the airport) I pressed the approach button on the FMC. The altitude was always 5000 feet from activating the AP and when reaching the being of the runway and the plane flew over the runway in 5000 feet and behind the airport, it crashed into a mid-size mountain. I think I have to try this again ;-)
Bij mij staan er geen landings banen
It doesn’t work on Xbox can anyone help me?
Simple easy best
Easyvhe said.....right😮
Joe Rogan?
Man nice tutorial but you sound so bitter. Lol get som fresh air.
TO BASIC LEARN NOTHING
I use X-plane 12 and it doesn't let me to write it, it shows this: not in database
What's the problem?