Please Don't forget and leave out the 1978 1979 Broncos always tough finding kits for any modifications we do You Guys do Amazing mods like no others do Thank You!!!
The motor is offset to the left looking at it from the front ubecause the Dana 44 differential is on the right side of the front end housing and this allows transfer case to have a straight line to the front end housing
One day…..my 1977 Ford F-150 4x4 short box that we grew up in as a kid is going to get a coyote upgrade. I will be giving you folks a call when it’s time.
Unfortunatley we haven't been able to verify that.. If the measurements are the same then yes, it should work. If it doesn't, we'll consider making a specific kit for it (provided demand is high enough) If you have any more questions or want a more detailed answer, please email info@fatfendergarage.com
We don't have a specific kit made up for that yet, but we do have our Universal Coyote swap mounting kit that is usable in almost any vehicle, as long as you're okay with doing some cutting and welding to make it fit. www.fatfendergarage.com/product/universal-coyote-swap-engine-mount-kit/
We don't have a specific kit for those right now, but we do have a universal coyote swap kit that can be modified to work in your 94 4WD F150. Here's a link to it if you're interested: www.fatfendergarage.com/product/universal-coyote-swap-engine-mount-kit/
Closest thing we have right now for the Broncos is our Universal swap kit. We may make a specific kit for them in the future tho, nothing's off the table.
My name is Jerry I have a coyote out of 2012 trans transfer case with 80,000 miles with original ECM and wiring harness and steering column with key. If interested
Can you show and explain the wiring harness? Also, I would want to keep the original heater/ac box and the original gauge cluster. Is that possible you think?
90s F150 and Bronco fans need sum love!
Da Mack soon
Bump
Fat Fender Garage , got a 94 flareside with the 4.9, looking to swap in a coyote, can you tell me anything about that?
Agreed Been watching some vids would also like to know if yall are looking to do EcoBoost 3.5 and 2.7 kits for bricknose and obs models
There’s probably a good chance of the motor mounts working
Please Don't forget and leave out the 1978 1979 Broncos always tough finding kits for any modifications we do You Guys do Amazing mods like no others do Thank You!!!
Let’s hope!
I gotta 78
The motor is offset to the left looking at it from the front ubecause the Dana 44 differential is on the right side of the front end housing and this allows transfer case to have a straight line to the front end housing
Correct it was a breakthrough the engineer allowed great ground clearance 4x4 and a useable bed height and door entry
nice thanks for be helpful for us diy guys
Hi, i can't wait fir my kit to arrive i already placed the order, i would like to know how to wire the 2014 transfer case, thanks in advance
So happy to have found this, What about the 78-79 dent side bronco will this kit work?
That’s what I need to find out!
With the high boy you could use 2wd trans mounts as they use divorces transfer cases
Thank you
One day…..my 1977 Ford F-150 4x4 short box that we grew up in as a kid is going to get a coyote upgrade. I will be giving you folks a call when it’s time.
Have y'all done a coyote swap on a 4x4 with a manual transmission? If so what transmisson did you use?
Would the fit be similar for an OBS truck? 1995
Lookin for Mount,s for 1993 ford truck Motor mount,s Complete 5.8litre Thks again
do you have a kit for a 1990 ford bronco? 3rd gen f150 coyote 4x4 donor
What about on a 1967
Will this work with a 5.2 predator? I have a 1978 f150 and I’m trying to find mounts that will work.
Will the stock heater box clear with this swap?
✌🏼
does this kit work on the 78/79 broncos as well?
That’s what I asked as well hope you get an answer
Unfortunatley we haven't been able to verify that.. If the measurements are the same then yes, it should work. If it doesn't, we'll consider making a specific kit for it (provided demand is high enough) If you have any more questions or want a more detailed answer, please email info@fatfendergarage.com
Please make a kit for a 1996 Ford Bronco or recommendations please if you can?
How do you activate 4x4 with a gen 3 coyote and 10r80 from f150 and a ford control pack ?
Do you guys know where I can find a 1973-74 f150
Do you sell a kit that will fit 1985 F 150 4X4
Do you fellows have a kit for a 1996 F250?
We don't have a specific kit made up for that yet, but we do have our Universal Coyote swap mounting kit that is usable in almost any vehicle, as long as you're okay with doing some cutting and welding to make it fit. www.fatfendergarage.com/product/universal-coyote-swap-engine-mount-kit/
are you going too come out a swap kit for a 7.3 powerstroke in a 67-72 f100-350 2x4 and 4x4 trucks ar all.thanks
What about the 78-79 bronco's?
What about a 1972 Bronco?
Will you be doing one for Broncos (96)
This.motor will fit a 1986 bronco full size with the original transmission
Do have kit to put a2012 put coyote in a 1990 f150
Unfortunately we don't.
@@FatFenderGarage do you know if there is a motor mount and or transs mounts to put a F150 coyote into a 1990 f150 by anyone. If not thank you anyway
1967 FORD GALAXIE FASTBACK
&
1966 FORD F100
IS THERE ANY KITS AVAILABLE?
My 1994 F150 4x4 super cab Needs the howl of a coyote under the hood...!
Anybody got a kit for that ?
We don't have a specific kit for those right now, but we do have a universal coyote swap kit that can be modified to work in your 94 4WD F150.
Here's a link to it if you're interested: www.fatfendergarage.com/product/universal-coyote-swap-engine-mount-kit/
I have an 18 f150 with a 2.7, lookin to swap a 5.0 in it, would i need this set up?
Kit for a 1996 bronco??? thanks
Closest thing we have right now for the Broncos is our Universal swap kit. We may make a specific kit for them in the future tho, nothing's off the table.
What about the 86 bronco
It's on our list. Don't want to make promises, but guessing about 6 months...
@@FatFenderGarage thankyou I'm looking foward to it
@@FatFenderGarage what motor mounts will yall be using
Do you know where I can get a coyote engine and transmission for my ford 1977 bronco?
I think we'll do a video soon on where to buy.
My name is Jerry I have a coyote out of 2012 trans transfer case with 80,000 miles with original ECM and wiring harness and steering column with key. If interested
Does the transmission crossmember replace the factory transmission crossmember? Do you remove the factory crossmember that ties into the radius arms?
Bullet Hole Bronco leave crossmember with radius arms. Others need to be removed.
Can you show and explain the wiring harness? Also, I would want to keep the original heater/ac box and the original gauge cluster. Is that possible you think?
Peter Griffin maybe on the AC box. It will be very close.
Peter Griffin
I you want to keep the original cluster you need to keep your 205 transfer case
When is the “How to fit a EcoBoost in your truck” video coming?
EcoBoost EngineSwap working on a PS kit. Had to order new compressor and alternator.
Fat Fender Garage What Freon are you using?
R134. The 1234y isn’t feesable for us.
Fat Fender Garage Are you using the earlier 134 compressor?
The 134 should be ok for the 1234y systems. From why I’ve read. They anticipated people changing.
Can u fit a coyote on a 2006 ford ranger 4x4??????
No
Would you still be able to use a manual transmission with this kit?
Yessir