Very nice m8! I got 2 golf mk2 and one has the same engine and it's gonna be restored like that at summer! I grew up with these cars as well and I have the same passion and I agree to the thing you said below about your dream and so it was pretty much the same as mine!
Thank you for the appreciations. It is my childhood dream to have a VW GOLF GTI II 1.8 16v KR completely restoration as we have not seen in our country . Most people around me do not understand me and condemn me for the effort and money invested , but satisfied that I have when I see more and more of a dream realized does not compare !! :)(Romania)
Don't listen to your friends.... If it's really the thing you want, just go for it, I'm looking for an ABF Engine, or even an Golf GTI 16v Mk3 to work on, just saving cash lol
wie kann man denn Block ,ZK und Ansaugbrücke nur Sandstrahlen ?!?!?!?! Es bleiben selbst bei gründlicher reiniegung immer noch Sandrückstände in denn Ölbohrungen ,bzw in denn Rizzen von der Ansaugbrücke .
Hey! This is a big inspiration for me. Got a KR that is in horrible condition (sort of same as yours was in the beginning) Where did you buy all your stuff and exactly what did you change? Got any tips & tricks?
Gire la bujía del primer cilindro (o los 4 para girar más fácilmente), inserte un destornillador en el orificio de la bujía y gire con una llave de eje hasta que sienta con el destornillador que el pistón está hacia arriba, en punto muerto. En ese momento, tanto el signo "OT" en el árbol de levas como la polea ranurada deben estar en el signo. Si no es así, significa que estás barriendo, así que giras una vuelta más, para alcanzar la compresión. Además, puede quitar la tapa y ver la posición de las levas (si no confía en la marca de la polea), en la válvula 4 las válvulas deben ser atacadas simétricamente. (es decir, uno simplemente se cierra y el otro simplemente se abre)
Hi mate, I'm doing full restoration on my KR engine including the K-Jetronic. Did you had to adjust the K-jet for the first engine start after rebuilding it? Any advice you can give is welcomed.
Great video, it helps a lot! Im looking at buying a 027 KR head currently on a 2.0 block. Not sure if it's an ABA block or older but plan to build it back up with my Cabrio 2.0L ABA block. How long did you take on the tear-down and build up? Can it be done in a month if you have all the parts? What did you get machined?
Thanks man. And good luck with your project.About the tear down and build up question,well it took me a few months cause the car is in another city and i have to go to work and soo I had to work only in weekends.Off course,it can be done in a month. Here is some videos : ruclips.net/video/aJwV8LPNaXg/видео.html
Olá, tudo bem? Sou eletricista e estou com um GOL GTI 2.0 16V que não pega de jeito nenhum, já corri fios e tudo certo a central tá bem alimentada e todos os sensores são com 5v e o sensor de rotação tá mandado pulso pra central e ela não distribuir pulso pra os bicos e nem tem faísca na bobina? Essa central já foi testada em bancada com o simulador e mim falaram que ela está boa e agora o que é? Será que uns de vcs poderiam me ajudar com esse defeito cabeludo? Meu ZAP é (41)988155114 só tenho agradecer.
Music is great... Restored engine is greater! Awesome job!
Prashaant Siddharth Teeluckdharry music is gay.
Thanks man. I think the music is funny 😀
Smart looking engine you've got there!
Thank you for your appreciation , I am very heppy when I see are people who appreciate what I do !
Very nice m8! I got 2 golf mk2 and one has the same engine and it's gonna be restored like that at summer! I grew up with these cars as well and I have the same passion and I agree to the thing you said below about your dream and so it was pretty much the same as mine!
I enjoy very much when I see that there are people who appreciate what I do and I do not condemn. :)
Rally vw GTI KR Very much appreciated! I'm in California in my garage working on the same engine. Lol..it can be done! Thanks! Good work!
+rodk691 good luck bro and enjoy your rides! Much love
Bravo good job !
Thank you for your appreciation , I am very heppy when I see are people who appreciate what I do !
I have the same gti...and i send you my best congratulations for this restoration...it's a little piece of art
I finished and gearbox are to post the video
Thank you for the appreciations. It is my childhood dream to have a VW GOLF GTI II 1.8 16v KR completely restoration as we have not seen in our country .
Most people around me do not understand me and condemn me for the effort and money invested , but satisfied that I have when I see more and more of a dream realized does not compare !! :)(Romania)
Don't listen to your friends.... If it's really the thing you want, just go for it, I'm looking for an ABF Engine, or even an Golf GTI 16v Mk3 to work on, just saving cash lol
wie kann man denn Block ,ZK und Ansaugbrücke nur Sandstrahlen ?!?!?!?! Es bleiben selbst bei gründlicher reiniegung immer noch Sandrückstände in denn Ölbohrungen ,bzw in denn Rizzen von der Ansaugbrücke .
Good job. My Seat Toledo mk1 with Abf engine need restoration. In this video I get many information . Thank you.
thanks
buna. great job :) greetings from germany
Thanks man. Here is something for you :ruclips.net/video/aJwV8LPNaXg/видео.html
Beautiful 16 v
Thanks man. Here is some videos for you :ruclips.net/video/aJwV8LPNaXg/видео.html
Very Nice Good Job
gharaib elalem
Thanks !!!!
Here is more :ruclips.net/video/aJwV8LPNaXg/видео.html
Awww maaan sooo nice!
Thanks! :)
Here is more :ruclips.net/video/aJwV8LPNaXg/видео.html
Hey! This is a big inspiration for me. Got a KR that is in horrible condition (sort of same as yours was in the beginning)
Where did you buy all your stuff and exactly what did you change?
Got any tips & tricks?
Parabéns!
Very nice mate
:)
Here is more :ruclips.net/video/aJwV8LPNaXg/видео.html
Amigo podrás ayudarme como se sincroniza la banda de distribucion y sincronizan los árboles
Gire la bujía del primer cilindro (o los 4 para girar más fácilmente), inserte un destornillador en el orificio de la bujía y gire con una llave de eje hasta que sienta con el destornillador que el pistón está hacia arriba, en punto muerto. En ese momento, tanto el signo "OT" en el árbol de levas como la polea ranurada deben estar en el signo. Si no es así, significa que estás barriendo, así que giras una vuelta más, para alcanzar la compresión. Además, puede quitar la tapa y ver la posición de las levas (si no confía en la marca de la polea), en la válvula 4 las válvulas deben ser atacadas simétricamente. (es decir, uno simplemente se cierra y el otro simplemente se abre)
Los mejores motores del golf GTI 1990
mine is from 1985
Hello nice restoration but bolts need clean or repaint too :) (small advise)
I have the same motor in my 90 GLI.... I'm about to yank it and replace it with a VR6
nice...and good luck. Hope it works smooth
@@RallyvwGTIKR it will...i already got the motor in...just starting issues👍🏽
nice rims bro on mk2
Thanks man. Here is something for you :ruclips.net/video/aJwV8LPNaXg/видео.html
Hi mate, I'm doing full restoration on my KR engine including the K-Jetronic. Did you had to adjust the K-jet for the first engine start after rebuilding it? Any advice you can give is welcomed.
his there any one have a 16 valves cylinder head for sale with distributor and pistons
how much does this repair cost?
Disculpa de que motor es la cabeza de 16 v?
Motor KR ou PL
Great video, it helps a lot! Im looking at buying a 027 KR head currently on a 2.0 block. Not sure if it's an ABA block or older but plan to build it back up with my Cabrio 2.0L ABA block. How long did you take on the tear-down and build up? Can it be done in a month if you have all the parts? What did you get machined?
Thanks man. And good luck with your project.About the tear down and build up question,well it took me a few months cause the car is in another city and i have to go to work and soo I had to work only in weekends.Off course,it can be done in a month. Here is some videos : ruclips.net/video/aJwV8LPNaXg/видео.html
Hi,got the same job to do ...what's the paint you cover the air intake head and other parts ? do they survived the heat enought ?
powder coat
what awesome song is this? :O)
I don't know. I just picked one from the list
Awesome vid man. Is 1000$ a good price to buy a stripped '82 rabbit?
Yes :)
Liam Morrison I got my mk3 gti 2.0 full interior on coilovers for $1200
what paint and primer did you use ?
electrostatic painting :)
Olá, tudo bem? Sou eletricista e estou com um GOL GTI 2.0 16V que não pega de jeito nenhum, já corri fios e tudo certo a central tá bem alimentada e todos os sensores são com 5v e o sensor de rotação tá mandado pulso pra central e ela não distribuir pulso pra os bicos e nem tem faísca na bobina? Essa central já foi testada em bancada com o simulador e mim falaram que ela está boa e agora o que é? Será que uns de vcs poderiam me ajudar com esse defeito cabeludo? Meu ZAP é (41)988155114 só tenho agradecer.
Everything fine except for that comercial 👎
:(