i watched this project from start to finish it really gave me a lot of confidence to do my own f2, so now thats currently exactly what im doing, so thank you
kick ass,...come on you cant make this the LAST video. Loving the dash. That's good stuff. You have to do a video riding it around reving it up! Great job by the way again!
I have a 1995 CBR600F3 and I'm keeping it as original as possible apart from the paint and a few mods. I've added some crash protectors and a neat marine 12v cigar lighter socket to charge what I need to on the go :)
They are stock front. The fork works good to me, but thats a matter of opinion. I hear track guys think its a little too soft and they begin to do suspension work on it, like change spring and oil weight
Hey it me again, i bought a multimeter and figured it all out and it is complete. Thanks for your help. My only question now is what did you paint the frame and engine with? Thanks
Dude I have so many questions on where you found all the stuff starting with the front mud guard also the belly pan (fairing under exhaust) and lastly the steering dampner thanks
The way I did it was I tried to fit the tail on and see what was stopping it from going on. Take measurements to make sure that you are not over cutting. Also be prepared to run to a welder, luckly mines fit without needing any weld but since our sub frame are diff, that may be a diff story for your frame.
The five wires, one is ground, one is constant power, one is power when you press brake, and the two remaining are left/right signal. You should have five wires to tap into from the wire on your bike
@mcshezzle85, You'll love doing the project and when it's done you and your bike should have a bond. I was going to sell it since I didnt see a need for two bike but I just cant do that any more.
Hello and great job! You did very well with the vids explaining your steps. Question please? What model is the Garmin Nuvi? Your speedo idea using the Nuvi is fantastic and you will always know where you are. (Model Please Sir) Thank you, Mark
There's a high temp engine pain you can use. Thats what I did. It goes on smooth and looks great if you do not let it run. The frame I used flat black autozone paint.
@r1sabotage good looks with the vid. i have a 94 cbr f2 and im trying to start my project in the winter is the year of your bike near my own as well?, only asking because im trying to figure a gsxr tail or a cbr RR .
@r1sabotage thanks man. than i will probably do the same:D. what are you using for the speedo? is it a gps? if u got it online can you please post the link?
dude that's a nice bike you did a good job on that bro i love it and the paintjob damn bro the paintjob is bad ass and the sound of the bike its making me happy nice job bro respect bro
is the passenger seat supported? could someone sit on there? im doing thesame streetfighter, same year bike, same tail conversion, and would like to ride with a passenger after im finished.
@TheCbr92 , I stripped the bike down and first covered the engine with news paper and tape to paint the frame, then after it dried, I taped the frame with news paper and sprayed the engine with high temp engine paint. To drop the engine would take too long, I wanted this project done and over with..
@hockeyjob1 Sorry, i have no idea how that subframe look without the plastic. The best direction to go is google streetfighter pictures of your bike and see what tails people are using
Do you have any pictures of the mounting system you used I'm getting a 93 f2 today or tomorrow. Gonna get a carbon fiber r6 rear fairing for it. Does the rear seat lock on to the plastic or you have to put something on the frame.
i watched this project from start to finish it really gave me a lot of confidence to do my own f2, so now thats currently exactly what im doing, so thank you
kick ass,...come on you cant make this the LAST video. Loving the dash. That's good stuff. You have to do a video riding it around reving it up! Great job by the way again!
This Bike is FIRE!!!!!!! "I love it when a plan comes together" lol Good Job
Dude, we have the same bike, same headlight, and same mirrors. haha. Bike looks great, mine isn't near done yet. Awesome job.
Hell yeah, I like all the fine touches.
I have a 1995 CBR600F3 and I'm keeping it as original as possible apart from the paint and a few mods. I've added some crash protectors and a neat marine 12v cigar lighter socket to charge what I need to on the go :)
That bike is so dope bro nice job!
Hello again. Was the Nuvi hard to mount? How and what did you use hardware wise...Thank You, Mark
How much did the whole thing cost roughly? Excluding the cost of the bike, just parts etc? Thanks
Cool bike, What headlight did you use?
They are stock front. The fork works good to me, but thats a matter of opinion. I hear track guys think its a little too soft and they begin to do suspension work on it, like change spring and oil weight
Hey it me again, i bought a multimeter and figured it all out and it is complete. Thanks for your help. My only question now is what did you paint the frame and engine with? Thanks
nice bike. hey did you make the belly pan urself or did u buy it online? thanks
WOW.. Looks sick man. Love it. How did you paint the frame and motor? Did you separat them?
steering damper, works like a shock to keep the handle bar straight should it want to go left, right without you wanting it to.
Good work, What tail and etc are you using on this one? Do you mention it in the other videos?
that looks like stock front end, how do the the forks perform? I've been looking to get my seals replaced, and curious about settings.
Dude I have so many questions on where you found all the stuff starting with the front mud guard also the belly pan (fairing under exhaust) and lastly the steering dampner thanks
The way I did it was I tried to fit the tail on and see what was stopping it from going on. Take measurements to make sure that you are not over cutting. Also be prepared to run to a welder, luckly mines fit without needing any weld but since our sub frame are diff, that may be a diff story for your frame.
The five wires, one is ground, one is constant power, one is power when you press brake, and the two remaining are left/right signal. You should have five wires to tap into from the wire on your bike
@mcshezzle85, You'll love doing the project and when it's done you and your bike should have a bond. I was going to sell it since I didnt see a need for two bike but I just cant do that any more.
Hello and great job! You did very well with the vids explaining your steps. Question please? What model is the Garmin Nuvi? Your speedo idea using the Nuvi is fantastic and you will always know where you are. (Model Please Sir) Thank you, Mark
nice job man, planning an f2 fighter of my own
There's a high temp engine pain you can use. Thats what I did. It goes on smooth and looks great if you do not let it run. The frame I used flat black autozone paint.
Rise the tail and drop the front about an inch maybe change the front headlight too.
the idle sounds rough.
Cool Bike
Loving the bike. great paint job and wondering how long it will last?
nice job .what model garmin nuvi you use for speedometer?
thx
@xjgseven , You right, that does sound cool... Once I get the stunt sprocket on, i'll probably make that happen
bad ass man nice work
looks beautiful bro
@r1sabotage
good looks with the vid. i have a 94 cbr f2 and im trying to start my project in the winter is the year of your bike near my own as well?, only asking because im trying to figure a gsxr tail or a cbr RR .
was the tail conversion hard ?? and is there alot of cuttiing?? r1sabotage
Where did you put coolant reserve and how u make belly pan
@r1sabotage
thanks man. than i will probably do the same:D. what are you using for the speedo? is it a gps? if u got it online can you please post the link?
dude that's a nice bike you did a good job on that bro i love it and the paintjob damn bro the paintjob is bad ass and the sound of the bike its making me happy nice job bro respect bro
is the passenger seat supported? could someone sit on there? im doing thesame streetfighter, same year bike, same tail conversion, and would like to ride with a passenger after im finished.
Yo did you cut the tail or did or leave it stock?
Front more down tail more up, perfect
hi i love your project.did you have to modify your subframe to put on the r6 tail.and is your front mudguard the standard or from another bike.thanx
silva wong no modification to the subframe, from is oem. watch my other videos on it
What did you do to make the tail fit
quedo muy bien la moto felicidades buen trabajo. ¿El colin que le pusiste de que moto es?
Es de r6
is it legal to not have a muffler?
where did you get that bellypan....... id like one for my 600 streetfighter
EBay, search universal belly pan
@TheCbr92 , I stripped the bike down and first covered the engine with news paper and tape to paint the frame, then after it dried, I taped the frame with news paper and sprayed the engine with high temp engine paint. To drop the engine would take too long, I wanted this project done and over with..
Hey where'd you get that front fender and what tail is it
you know if you go through the videos I explain everything...
@xjgseven , You right, that does sound cool... Once I get the stunt sprrocet on, i should be able to make the clip..
@4542naughtchamps , it was a 1992 F2. But they the same thing, a had a two 1994 when I first began to ride
how did and how hard was it to mount that tail
not hard at all. look at the my videos, the parts show how I did it
What year is that bike?
@4542naughtchamps our bikes are the same. this one was a 92, same as the 94
year?
very nice man where can i get that digital dash you had
@hockeyjob1 Sorry, i have no idea how that subframe look without the plastic. The best direction to go is google streetfighter pictures of your bike and see what tails people are using
dude raise it up a little the tail, she shud be at the same level with the tank. it looks wired like that. mY opinion!
What seat is that off of?
R6
Did you have to make any special mounts to fit the seat ?
Andrew Brandt yes I fabricated some thing to mount it
Do you have any pictures of the mounting system you used I'm getting a 93 f2 today or tomorrow. Gonna get a carbon fiber r6 rear fairing for it. Does the rear seat lock on to the plastic or you have to put something on the frame.
nice!!
where did you get that bottom bikini fairing?
Not bad!
I have painted many motorcycles before, i just dont like high temp it always looks flat to me..Thank you
nice, would have been better with a plain red tank though
cool it!!! but tail low..
@emangsinting Sorry, I dont recall.
lol standing up on a lighter petrol can so it doesn't scratch the paint on the stand =)
If Ali express and wish built a bike 😅
@kjuge182 06-07 r6 tail. Thanks
Tail low, headlight high
ebay, search universal belly pan
As legal as robbing a bank...
tail is too low
yuck!
ebay, search universal belly pan