- Видео 33
- Просмотров 390 587
r1sabotage
Добавлен 28 июл 2009
Видео
Scotts Steering damper or eBay brand
Просмотров 13 тыс.4 года назад
Scotts Steering damper or eBay brand, which one to buy? I go over the problems I had with the eBay brand so my opinion is to just buy the real Scotts.
PA Lost Trails on YZ250
Просмотров 4787 лет назад
This is my second time riding dirt. I did real good compared to the first time I rode it on dirt. Went down twice that day but any time you go down and nothing is broken on you then it is a good day.
Thompson speedway trackday 4/23/16
Просмотров 8018 лет назад
First time at this track, with Tony's track day. It was a great day and the CBR F3 ran great. Started out wet from a down pour the night before into the morning but that was ok because I was going to take it easy trying to learn the lines. My lines are not 100% but I think I did good for my first time at a track that is very hard to pass safely without stuffing it in the corner on some unsuspec...
First ride on 2 stroke YZ250
Просмотров 3228 лет назад
This was my first time riding a 2 stroke. Didn't realize how powerful it was. Went straight up with throttle only and crashed
Thought on used helmets
Просмотров 9588 лет назад
Taking up motocross and was given a used helmet for free, thought I'd review my finding and thought on buying used helmets
2009 R1 MOD update
Просмотров 4,7 тыс.8 лет назад
Still working on my R1 as funds become available to make it my dream machine
CBR F3 quick shifter test
Просмотров 9 тыс.9 лет назад
Testing out the quick shifter before my track day this weekend. Shifts real smooth, I'm very happy with the results.. The ticking you hear in the video is the fuel pump trying to pull the last bit of gas in the tank before it run out
CBR F3/F2 hybrid track bike
Просмотров 4,4 тыс.9 лет назад
This is my track bike that I'm done with for now. I have my first track day April 11th and I can't wait to see if I addressed all the flaws I found when I rode the bike in the track last year
SS182 on CBR F3
Просмотров 6 тыс.9 лет назад
Took a while but with the help of another CBR 600 owner we were able to get it running on the bike
CBR F3 motor tick
Просмотров 1 тыс.10 лет назад
Just finished putting my F3 back together, got it started and it now have this annoying motor tick which wasn't present five months ago.
Shorai Battery review for 09 R1
Просмотров 8 тыс.11 лет назад
I just wanted to upload this vid after a subscriber requested one from me. Hope you enjoy
1995 GSXR 750 Streetfighter pt1
Просмотров 12 тыс.12 лет назад
Ok, here is my new project. This is a 1995 GSXR 750. I bought it from a guy who gave up on trying to bring this bike back to life. Lets see if I can succeed or just past it down to some1 else. Stay tooned
Yamaha R1 dyno results
Просмотров 3,8 тыс.12 лет назад
Here is my Dyno result for my bike... After riding it home from the shop I can say that this bike is now a beast...
Thanks, I have 1 scotts since 2009 and ive serviced it over 10 times, never changed a seal just clean and grease the old ones. I used it on a stuntbike for a years and it always worked perfect exept of the connection pin in the arm/axle that one failed first year, ive replaced it for a hard steel one and now its good. The scotts costest me 550 and mounting kit 200 or so, Now after 14 years i can still use it on my streetbike. Best mony i ever spend on bike parts. It still works like day 1.
so one cowboy builder friend that trust it gave it to another cowboy builder to basically put it together by spraying painting everything, putting chinky panels and patch it up together with a frame that was cracked:) lololoolololol
Just buy a used Scotts if you want to save money.
*SORRY SCOTTY THAT THEY CLONED YOU, WHAT A BUNCH OF SAVAGES* The only small downside of teh savage is the knob indeed, other from that its close to identical to the scotts. I dont believe u had a lot of problems as you say with the savage, u only mention the problems of the real cheap one. Savage is 90% of the scotts qualiuty for 5 times less the price, and that is for the mayority of us the best buy.
Great review! Thank you!
How much did it cost for the plastics and new windshield?
it was on what for $500
What’s that front fender you used? I’m building a f2 street fighter and the tail video helped so much but I want that front light and cover
Esta muy bien estéticamente.. se escucha ruido a cadena de distribución.. y esa tapa de alternador no es original
If Ali express and wish built a bike 😅
I got the Savage brand and please,,,SAVE your money and buy Scott's,,, right out of the box it was leaking oil. The box inside already had some oil spill. I manage to refill it hoping that it was just a fluke.. Unfortunately it is leaking. The settings are really useless for fine tuning. It goes many clicks and no change just the last 3 clicks it starts dampening. The material is soft. The lever has a lot of movement before it engages. Waste of money!!!!
cool dude.
Have savage for over 3 years and 50k km No issue at all.. I was riding same bike with scotts and it felt completely same.. To me, they are same..
Rip wheel bearing
Air duck
Anyone else waiting for it to slip off the stand? Would've been very funny to see.
Well, I was holding the front brake so with the wheels spinning that fast, it would of just made a cool burnout. Plus stands are pretty stable so a properly lifted bike is hard to topple.
69 lol
Before watch this, I bet they are near the same "let's see" Well dude we want to see the internals
They are identical. If u order the cases from Scots they are blanks no identifying marks as far as branding goes. I have a feeling that in not all but most of the parts used to build these dampeners are manufacturered in China. Example I lost the arm but on the bottom of my knock off unit. So I took a chance and ordered one from Scotts. "They are a one of a kind pitch that no one else uses. Fit like a glove. Now w that said I'm looking at buying the scotts when funds are available. The customer service is top notch... And that goes a long ways. Did the savage because I wanted to try a stabilizer out before I dropped $600 on one to find out I didn't like em
-dampeners- DAMPERS@@EastTexasADV
where can i buy??
In the past i was wondering if i should buy those ebay fake steering but the reason why i purschased the real one but used, was because you don’t want to risk it in a ride. Juste imagine if the fake lock while you are intering a corner! Security first.
Does anyone make a kit that actually matches the factory green colour? This kit looks much more yellow
i had both plastic next to each other, they matched...
@@r1sabotage thank you for the reply! All of my originals are scratched and i wanted to ensure it matched the tank
@@r1sabotage i watched it again. The tank graphics seem to be more towards green and the rest yellow. Camera maybe?
@@HAMMER8181 i recall it matching but again, these are after market fairings and we're discussing something I bought over five years ago so no way to get a definite answer on what you would get. Auctmart or something like that used to be the go to after market fairing when I used to pay attention to such matters.
@@r1sabotage understand. My attempts to get original graphics kit from suzuki proved to be a waste of time. Nothing wrong with any of my bike fairings just a few scratches. Ride safe
My question is, will the Scotts damper directly bolt up to the Savage mounts and work without any type of failure? I purchased a new/lightly used Scotts damper with no mount for a bike I just sold (2019 KTM 690 SMCR) that i was gonna put it on but never bought the mount for. Now I have a 2020 Yamaha MT09.. my problem is that Scotts does not have a mount for that style damper. GPR has a really nice setup with the damper that mounts under the bar, to their riser mount. But GPR dampers always blow out and leak. Savage makes the damper mount style I like with it right up top above the bars.. If I knew for a fact that I could swap my Scotts to a Savage style mount I'd spend the money and do it just to have a good reliable damper.
Well the Savage and the Scott body and mounting points are identical. So if savage makes a mount for their Scott's knock-off then the real Scott damper will mount onto the Savage mount. The only thing you have to take into consideration is that metal lip at the bottom of the dampers. Scott has different lips to connect to different tank brackets. You'd have to buy the right one and swap to fit the Savage if they are not the same. As I should have stated in the video, my Savage damper is mounted onto a real Scott damper on my sv650 and I interchange it with the real Scott.
Good to know, I appreciate the reply.. I could always modify the pivot arm or make a new pin to fit the current arm I have. Im a machinist by trade.. I dont have time to do the R&D to create a new mount, but something small to make it work i could probably buzz out. Thanks again man 👍
Love it bro! You need to get some Techspec grips thou!
That's funny you said that, I bought the ebay tank guard as a quick temp grip until I bought my techspec but the thing worked so good and was so grippy it was hard for me to spend that $80 just to say I have a brand name. The grip is still going strong but once I do need a replacement the techspec is the way I'm going
I prob heard it wrong, but was that, "red ionized spools."?
Hey I were tried to respond back to you but somehow it won't let me. Truly appreciate your compliment and concerns bro. Last year, it was one of the hardest situations to be in and you are right....it was hard as shit and hell lol. Thanks again bro nice meeting you
Glad its behind you now, I cant wait for this to be behind me as well
Some people don't deserve a superbike when they treat them like shit PFT
whats the brand of the Quick shifter? how is it at low rpm?
It's the bazzaz qs4, very smooth even at low rpm but I really only use the qs at high rpm
@@r1sabotage do i have to have bazzaz control unit? Or the qs works with ecu
@@sanjv1120 it's a stand alone unit. Just the unit that connected between the spark plug wires. Plug and play...
Where did u find mounts for the knock offs?
They are real Scott mounts, no way around it...
best damper around...Scotts..i have owned only 2 units since 02...used for off road single track riding....works great & probably saved me from horrific crashes in high speed incidents ...my units have seen thousands of off road miles ...great service & folks at Scotts...they even took the time on getting their damper mounted on my new TM...with their help & effort..i now have the best damper on the market on my oddball TM 300. worth every penny..
🧐🧐 7 gears???
I think the last click was a mistake, it did nothing, or so it seems to me...
where did you get your seat and how did it fit?
Thanks for uploading bro I been needed to get somebodies opinion
good to know, thanks
Front more down tail more up, perfect
I use a £40 motobatt battery on mine and starts immediately hot or cold! Why buy one of them for all that messing about?
That's nothing to do with a battery warming up, it looks like a combination of a few things. 1, oil pressure build up making the engine easier to spin up, oil getting distributed around the engine. 2, slow/weak starter & 3 a battery with low capacity.
this looks great everyone in my family rides, my 16 year old is building his first f2 street fighter and excited to do the dad and son build.SQUAD GOALS!!!
I'm waiting on my fairings. I hope they are good as yours
What year is that bike?
2009
its crank startor cover
Wish I knew about bikes so I can fix my r1 also nice bike btw fam
Everybody starts not knowing. one part at a time and build your way up. Get a user manual, buy one tools at a time and you'll get there
Nice bike I have same color I have 2014 I went down on my 4th day but it's going in shop this week
Looks great!
What tail did you add to the bike? I got the same bike and want to make it a street fighter and I noticed you cut the frame for the back seat. Would really appreciate if you let me know. Thank you
It’s never easy🤦🏽♂️😂 I just found out I’ve got a chewed up cam😩😴
Was the f3 motor swap just a direct bolt in I have an f2 and I'm thinking about doing the swap... any tips or advise would greatly be appreciated.. I'm not going to track the bike just want to give new life
what color do you paint the wheel? have the code the ink?
I bought one for my 09r1 and I live in Los Angeles CA. This battery sucks. Takes 3 to 4 times hitting start button.causes flooding and backfire not to mention wear on starter. Also must keep on trickle charger.
Nice vid but it's duct not duck. Just saying lol lovely bike
Yo did you cut the tail or did or leave it stock?
Dude I have so many questions on where you found all the stuff starting with the front mud guard also the belly pan (fairing under exhaust) and lastly the steering dampner thanks