Your short video just saved me $2200. by knowing the difference between the 4L60E and the 4L65E. Thanks for your assistance. (Buying a pig in a poke, on on-line purchasing)
Ive got the 5.3 liter upgrade (300-05253E) for my 2002 GMC Sonoma 4.3L SLS. Does every model only have 1 transmission or different gears ratios for a heavy duty towing option?
I have an 05 1500 with 4.3l 2wd. I know I can't use a four-wheel drive transmission. But after three days of searching I can't get an answer as to which version of the 4 l60e I need. And I can't get mine in the garage to remove it until I have a replacement transmission. We kind of puts me in a bind but I can't find anything about the 4.3 L of the 05 year
What are the differences between the 4L60e and 4L65e? Any gearing or anything else? And differences between 4L70e? I have 2008 silverado. I'm wanting to place a order.
I have a 2002 Silverado originally V6 I am swapping a LS into it. Will the V6 transmission work with the LS V8? If so is it a 298mm or 300mm? Thank you!
They are 1/2" to 1" longer depending on the Bell type. You won't need a different drive shaft, just a different yoke. Give us a call at 800-708-0087 and we can help locate the right one.
What transmissions require an ECU? Why? I want to change my 73 big block corvette to an over-drive transmission. What are my limitations? Max hp and torque not to exceed 400 ft/lbs.
If it is a 2wd it will be direct replacement they are essentially the same Transmission but if it is 4x4 you will need to match up the correct 4x4 extension housing with your Transfer Case but is possible. Thank you for choosing Monster Transmissions.
I am ls swap my 1994 caprice classic with a 2003 Cadillac Escalade esv 6.0. I wanted to use the 4.3 v8 transmission 4l60e that is already in my car. What will I need to make this happen
I’m looking at one of your Transmissions for my early 99 suburban. It’s a 4x4 but we are going 4x2 and doing away with the transfer case and front diff, do you know if a 2wd 4l60e transmission will drop right in? Thank you.
Thank you for reaching out to us. In the 2016 you most likely have a 6L80E transmission a 2009 Transmission would not be compatible with the newer truck. Give our team a call at 800-708-0087 and we can help you find the correct transmission!
What you have in your 2002 Chevy Tahoe with the 5.3L will be a 4L65E since it is a LS design motor your Transmission will require the 300mm input shaft not the standard 30spline input shaft the 4L60E will have. Here is a link to the 4L65E Transmission www.monstertransmission.com/Custom-Built-Monster-4L65E-Transmission-Torque-Converter_p_18573.html#.X7fsU2hKiUk
Yes the 04 Yukon Denali was equipped with a 4L65E you can find it here: www.monstertransmission.com/4L60E-4L65E-LATE-1998-2005_c_3941.html Or Give us a call at 800-708-0087
I'm doing an LS Swap and have an 01' 5.3 engine, do I need a 99-03 4l60e or can I use a 2004+ 4L60e as well? Meaning did 4L60e paired with 5.3s change after a certain year making them incompatible
Hello! The difference in the 2007 Avalanches transmission is it has a 15 pin harness with an Input Speed Sensor, the 2003 4L60E would not be interchangeable with it.
@monstertransmissions I have a 1996 Chevy Silverado 4x4 will a 2001 4l60e work in that truck? I noticed the bottom two bolt holes go into the pan on the ls motor but not the 5.7 vortec
I have a 93" Chevy van G20. How do I find out what type of transmission I have ? It's a 5.7 V8 but don't know where to look to find out if it's a 4l60, 4l80, or 704 ? Would it be in the VIN# ??
You can count the pan bolts, 16 Pan bolts indicate a 4L60E, 18 Pan Bolts indicate a 4L80E Pan bolt count to trans can also be found here: www.monstertransmission.com/Identify-Your-Transmission_ep_106-1.html
Yes it should. It will be a good idea to check the fluid and if any debris is in the pan before installing. Be sure to flush the coolant lines as well.
Yes we do offer both Variants for 2012 it could have a 6 speed 6L80/90 version or you could have what we call a 4L75 that will have the 17pin connector and the ISS Input speed sensor. You can find our GM Transmissions here www.monstertransmission.com/General-Motors-Transmissions_c_3751.html or of course feel free to contact us anytime at 800-708-0087
If you are trying to install a Converter that requires a 300mm input shaft ( That was bolted up to a LS Design Motor) on a Transmission that has a 30 spline (which the 4l60E from 1993-98 will have a 30 spline) The converter will just free spin and not hook up with the Splines of the input shaft and potentially wipe out the splines it does touch.
ugh i need a new transmission. i just dont know what to do. 4l60e is like 2 grand but a 6l80e and standalone harness is 3500 and a rebuilt 4l60e is around a grand.
Thank you for the comment! We can help you pick out the right transmission, give one of our knowledgeable product specialists a call at 800-708-0087 ext 1
Yes except for the really early 1994 Valve bodies. But typically you can interchange the Valve bodies between 4L60Es. Thank you for choosing Monster Transmissions.
@@everydaycar3518 That's because that is an LS Base converter and transmission. It will likely have pilot clearance and bolting up issues to the flex plate.
Yes your 03 Tahoe 5.3L Transmission will work with the 98 Suburban IF it has a LS Style motor either the 4.8l/5.3l/6.0l and it will bolt right up and work fine plug and play. Thank you for choosing Monster Transmission.
Unfortunately It will not mate up you will need a 4L60E 2pc case with the 30 spline input shaft not the 03 Tahoe 5.3L 4L65E with the 300mm input shaft to be able to work with your Vortec 350.
The 4L60E has a 30spline input shaft and what you need is a 4L65E with the 300mm input shaft to be able to mate up to your LS Design Motor. Here is a Link for the Transmission you need www.monstertransmission.com/Custom-Built-Monster-4L65E-Transmission-Torque-Converter_p_18573.html#.X7fsU2hKiUk
You will need a hub spacer and an LS Flexplate adapter. www.monstertransmission.com/Official-GM-Performance-Flexplate-to-LS-W-Crankshaft-Adapter-Spacer_p_11906.html#.XtfiZjpKibg
You will need a hub spacer and an LS Flexplate adapter. www.monstertransmission.com/Official-GM-Performance-Flexplate-to-LS-W-Crankshaft-Adapter-Spacer_p_11906.html#.XtfiZjpKibg
Yes it will bolt up to the 5.3L but depending on what you are using for a Controller will determine what you can use for the Transmission for example since 2006 is the Transition year it could be a 4L65E with the 13pin connector or it could be the 4L70E with the 15pin connector with the ISS Input speed sensor so the main point is to ensure your electronics match up.
They have different electronics so it wont be a direct swap, you would have to switch the wire harness and EPC. You could use the EPC and wiring harness from the 2kcd but we recommend getting new parts for it. If you need any technical support or parts for this give us a call at 800-708-0087.
Brilliant info, Thank You.
Your short video just saved me $2200. by knowing the difference between the 4L60E and the 4L65E. Thanks for your assistance. (Buying a pig in a poke, on on-line purchasing)
Glad to hear it! Hope everything works out with your purchase and build.
Pulled the one out of my 2006 chevy silverado. It has the splins all the way to the end but does not have the top bolt on the bell housing
Ive got the 5.3 liter upgrade (300-05253E) for my 2002 GMC Sonoma 4.3L SLS. Does every model only have 1 transmission or different gears ratios for a heavy duty towing option?
I have an 05 1500 with 4.3l 2wd. I know I can't use a four-wheel drive transmission. But after three days of searching I can't get an answer as to which version of the 4 l60e I need. And I can't get mine in the garage to remove it until I have a replacement transmission. We kind of puts me in a bind but I can't find anything about the 4.3 L of the 05 year
How well can a 4l60e handle Road Course racing or Autocross? It's in a 96 LT1 Corvette
What are the differences between the 4L60e and 4L65e? Any gearing or anything else? And differences between 4L70e? I have 2008 silverado. I'm wanting to place a order.
Does the little hole use a plug? At the bottom
I have a 2002 Silverado originally V6 I am swapping a LS into it. Will the V6 transmission work with the LS V8? If so is it a 298mm or 300mm? Thank you!
It won’t you gon need to change the transmission
What are the size difference's in the 1st and 2nd gen 4l60e? Will I need a long drive shaft?
They are 1/2" to 1" longer depending on the Bell type. You won't need a different drive shaft, just a different yoke. Give us a call at 800-708-0087 and we can help locate the right one.
How I spot the difference the one for the LS has a Xtra bolt whole top center of Bell housing
I'm currently looking for a tan plug one instead of a green plug and for the life of me I don't know what the difference is
I have a 4x4 99 Tahoe with the 5.7 engine. Is it possible to use any 4l60e from 97-99?
Hello! A late model 4L60E 2 piece case from a non LS engine should work just fine, give us a call and we can go over options - 800-708-0087.
Hi, I have a 95 suburban 4x4, I put a 99 4x4 trans in it. It runs but it doesn’t get out of 1st gear. What can I do?
What transmissions require an ECU? Why? I want to change my 73 big block corvette to an over-drive transmission. What are my limitations? Max hp and torque not to exceed 400 ft/lbs.
I just bought a 78 camaro with a 96 5.7 Vortec from a Tahoe, is there any manual transmissions I can put on this engine?
They have the 1 peice on the 97 GMs also. That’s what mine has.
We're can I find my part number for my trams
What do I need to use to use a 2 peice 4l60e instead of a 1 peice. I'd like a stronger transmission when my 4.3 goes out to throw in a v8.
If it is a 2wd it will be direct replacement they are essentially the same Transmission but if it is 4x4 you will need to match up the correct 4x4 extension housing with your Transfer Case but is possible. Thank you for choosing Monster Transmissions.
What about the gen 1, will it bolt up to an LS? Is the shaft different?
I am ls swap my 1994 caprice classic with a 2003 Cadillac Escalade esv 6.0. I wanted to use the 4.3 v8 transmission 4l60e that is already in my car. What will I need to make this happen
You're gonna need an Is hub adapter to make it happen.
I’m looking at one of your Transmissions for my early 99 suburban. It’s a 4x4 but we are going 4x2 and doing away with the transfer case and front diff, do you know if a 2wd 4l60e transmission will drop right in? Thank you.
You will need a new drive shaft with changing everything, but depending on which engine size it may be the 4L65E.
@@MonsterTransmission it's the 5.7, Thank you very much.
I have a 2016 GMC Sierra 1500 5.3 with the transmission out. Is the tranny of a 2009 Chevy 5.3 engine compatible? What tranny do I need exactly.
Thank you for reaching out to us. In the 2016 you most likely have a 6L80E transmission a 2009 Transmission would not be compatible with the newer truck. Give our team a call at 800-708-0087 and we can help you find the correct transmission!
Will a 20014l60e 4x4 fit in a 1997 4x4 4l60e ?
No, the 2001 4L60E was designed to match up to the LS motor.
What one goes on my 2002 Tahoe 5.3 4wheel drive Ls
What you have in your 2002 Chevy Tahoe with the 5.3L will be a 4L65E since it is a LS design motor your Transmission will require the 300mm input shaft not the standard 30spline input shaft the 4L60E will have. Here is a link to the 4L65E Transmission www.monstertransmission.com/Custom-Built-Monster-4L65E-Transmission-Torque-Converter_p_18573.html#.X7fsU2hKiUk
Will the 4l60e work with a 04 Yukon Denali 4 wheel drive?
Yes the 04 Yukon Denali was equipped with a 4L65E you can find it here: www.monstertransmission.com/4L60E-4L65E-LATE-1998-2005_c_3941.html
Or Give us a call at 800-708-0087
I'm doing an LS Swap and have an 01' 5.3 engine, do I need a 99-03 4l60e or can I use a 2004+ 4L60e as well? Meaning did 4L60e paired with 5.3s change after a certain year making them incompatible
99-05 will work as long as it has the LS bellhousing.
What needs to be done to use a 2003 4160e in a 2007 avalanche both are 5.3 4wd I understand u can go back to 96 but not up to 2007 working on it now
Hello! The difference in the 2007 Avalanches transmission is it has a 15 pin harness with an Input Speed Sensor, the 2003 4L60E would not be interchangeable with it.
What transmission do I need for 2007 suburban
@monstertransmissions I have a 1996 Chevy Silverado 4x4 will a 2001 4l60e work in that truck? I noticed the bottom two bolt holes go into the pan on the ls motor but not the 5.7 vortec
I have a 93" Chevy van G20. How do I find out what type of transmission I have ? It's a 5.7 V8 but don't know where to look to find out if it's a 4l60, 4l80, or 704 ? Would it be in the VIN# ??
You can count the pan bolts, 16 Pan bolts indicate a 4L60E, 18 Pan Bolts indicate a 4L80E
Pan bolt count to trans can also be found here: www.monstertransmission.com/Identify-Your-Transmission_ep_106-1.html
What all do I need when swapping my 4l60e to the 4l65e? I replacing the whole transmission.
They are not interchangeable 60 series is for the non LS and the 65 series top bolt is for the LS series
I have 2004 2WD envoy 4.2. Will a 2006 2WD Trailblazer 4.2 trans just drop in without any modifications?
Yes it should.
It will be a good idea to check the fluid and if any debris is in the pan before installing.
Be sure to flush the coolant lines as well.
Anything for 2012 4.8 2wd
Yes we do offer both Variants for 2012 it could have a 6 speed 6L80/90 version or you could have what we call a 4L75 that will have the 17pin connector and the ISS Input speed sensor. You can find our GM Transmissions here www.monstertransmission.com/General-Motors-Transmissions_c_3751.html
or of course feel free to contact us anytime at 800-708-0087
Will a 2005 Silverado 2wd transmission fit a 1995 firebird lt1
Unfortunately no it will not.
I have 1993 v6 Camaro will a 98 trans fit in her ?
What would happen exactly if I put a 2001 torque convertor on a on a second gen 4l60
If you are trying to install a Converter that requires a 300mm input shaft ( That was bolted up to a LS Design Motor) on a Transmission that has a 30 spline (which the 4l60E from 1993-98 will have a 30 spline) The converter will just free spin and not hook up with the Splines of the input shaft and potentially wipe out the splines it does touch.
Will a first gen 4l60e work in 03 sliverado?
No sorry
ugh i need a new transmission. i just dont know what to do. 4l60e is like 2 grand but a 6l80e and standalone harness is 3500 and a rebuilt 4l60e is around a grand.
Thank you for the comment! We can help you pick out the right transmission, give one of our knowledgeable product specialists a call at 800-708-0087 ext 1
Hello i have 1999 camaro 5.7 ls1 automatic wit a blown transmission is the 4l60e in my car a 1 piece or 2 piece?
You have a 2-piece 4L65E you can find it here: www.monstertransmission.com/4L60E-4L65E-LATE-1998-2005_c_3941.html
Or Give us a call at 800-708-0087
I have a 2004 4l60e 4x4 trans will a 4l60e 4x4 trans out of an 01 work in my truck
It might but there are some things that may be different depending on the vehicle. Give us a call at 800-708-0087 to review the vehicle information.
Are the valve bodies interchangeable on the 1rst two gens?
Yes except for the really early 1994 Valve bodies. But typically you can interchange the Valve bodies between 4L60Es. Thank you for choosing Monster Transmissions.
I put a little 2005 4l60e in a 97 gmc with original tcm and somehow it works
Also it’s a 5.7 that it bolted to and only thing that didn’t really fit was tourqe converter
@@everydaycar3518 That's because that is an LS Base converter and transmission. It will likely have pilot clearance and bolting up issues to the flex plate.
Driving fine to this day
I have a transmission from an 03 Tahoe with the 5.3, will it work in my 98 suburban
Yes your 03 Tahoe 5.3L Transmission will work with the 98 Suburban IF it has a LS Style motor either the 4.8l/5.3l/6.0l and it will bolt right up and work fine plug and play. Thank you for choosing Monster Transmission.
@@MonsterTransmission my suburban has the vortec 350
Unfortunately It will not mate up you will need a 4L60E 2pc case with the 30 spline input shaft not the 03 Tahoe 5.3L 4L65E with the 300mm input shaft to be able to work with your Vortec 350.
@@MonsterTransmission alright, well thank you, this is nice to know
Anytime! I wish you the best of luck!
Can you upgrade to the 6L80e in a 06 Tahoe?
Yes you can 👍
@@MonsterTransmission what all I need for it?
So the 4l60e will fit my 2004 avalanche z71?
The 4L60E has a 30spline input shaft and what you need is a 4L65E with the 300mm input shaft to be able to mate up to your LS Design Motor. Here is a Link for the Transmission you need
www.monstertransmission.com/Custom-Built-Monster-4L65E-Transmission-Torque-Converter_p_18573.html#.X7fsU2hKiUk
Will a 1997 c1500 4l60e fit a 2002 silverado motor 5.3
You will need a hub spacer and an LS Flexplate adapter.
www.monstertransmission.com/Official-GM-Performance-Flexplate-to-LS-W-Crankshaft-Adapter-Spacer_p_11906.html#.XtfiZjpKibg
Would the 4l60e from a '98 chevy k1500 (5.9) match up to a 2003 gmc sierra 1500 (5.3). Both are 4x4
You will need a hub spacer and an LS Flexplate adapter.
www.monstertransmission.com/Official-GM-Performance-Flexplate-to-LS-W-Crankshaft-Adapter-Spacer_p_11906.html#.XtfiZjpKibg
My trans is same as your 65e but has 60e on the side of the casing?
Yes because that's how gm identifies it. It is a 65 series still with a top bolt hole 300mm stator.
Could I put a 06 4l60e ona 01 lm7 5.3?
Yes it will bolt up to the 5.3L but depending on what you are using for a Controller will determine what you can use for the Transmission for example since 2006 is the Transition year it could be a 4L65E with the 13pin connector or it could be the 4L70E with the 15pin connector with the ISS Input speed sensor so the main point is to ensure your electronics match up.
I have 97 yukon i have forward gears but no reverse
It sounds like the reverse clutches are burned.
Monster Transmission its has been rebuilt once
Sun shell splines stripped
if it was a cheaper rebuild, i bet they didn't bother looking at reverse
Thank you
good info nice job
dose 4l60e match lt1 4th gen motors
Yes they do.
Hey. Will a 2kcd fit in an 04 4kcd ?
They have different electronics so it wont be a direct swap, you would have to switch the wire harness and EPC. You could use the EPC and wiring harness from the 2kcd but we recommend getting new parts for it. If you need any technical support or parts for this give us a call at 800-708-0087.
Monster Transmission what about a 5kcd?
This would also have different electronics and cooler line fittings.
So a 04 truck needs a 04 trans? That doesn’t sound right.
They should all work together, but were recommending to update to the latest electronics.
Does monster transmission build 4wd 4l60e transmissions?
Yes we do: www.monstertransmission.com/4L60E-EARLY-PRE-1998_c_3940.html
Will a two piece 1998 4l60e transmission from a blazer fit in a 1997 chevy 1500 pickup truck, that had a one piece cast bellhousing 4l60e?
No, the two piece 4L60E is designed for the LS motor.