Onya bro I've been upcycling boards here in Raglan NZ...cool idea reusing rail cutoffs I often struggle to maintain widths after removing old glass...the more we embrace this the better, Chur massive
I love that sand through look, and now I’ve seen how it’s done I might have to try it on my next one. Thanks for the vids man, they’re some of the better ones on here. 🤙🏼
Waves looks sick! Board might just need the right fins for that size of wave or it might be too big for it. Interested to hear what happened to the fin looks like when you delam or break a snowboard.
good video.I like your shop and tools. I haven't shaped in 25 years. but watching this makes me think I would like to start again. too bad the board didn't go so well, maybe for another surfer it might shred
It’s like riding a bike mate. You’ll never forget, although maybe a bit rusty. Yeh the board was always going to be a dog. But I don’t mind wasting a bit of time to experiment and try keep some rubbish outta the landfill. 🤙
Thanks. Yeh I’ve been trying to think of new projects. Watching boards being built will eventually feel like watching re runs so I’ll try change it up as much as possible
Nice project man. Curious about you rolling on the gloss coat instead of painting it on. Is it to avoid having to sand and Polish afterwards? And are you doing epoxy or poly resin?
Thanks man. That’s just an acrylic seal coat. No resin. I do it with both epoxy and poly. I’ll send ya some more detailed info on insta msg in a bit. This is secret sauce stuff! Haha
Another great video dude! Loved the bonus surfing footage, you always wonder how the finished board goes, shame FCS spoilt the party!!! One thing that would be really helpful is some info like how much resin you mixed for particular jobs etc. Loving your videos!!!
Thanks mate. The first surf was way too big anyways but I had to commit with the photographer there haha. For resin it changes from board to board and mostly it’s just an educated guess when I’m about to laminate. I think green light have a good chart you can reference
Epic! What glue did you use to attach the extra foam on the rails? Epic paint finish! Did you roll over clear coat at the end? Sick. I was gonna comment that it looked like you fully lost a fin out there! 😀. You could notice it after the 17:00 min mark. You actually did pretty good with that kooked fin
Great job, really enjoyed the step by step process. I make rc planes out of foam and use a hotwire for a lot of cutting and shaping. Also wondering why you paint before glassing? Fascinating similarities and differences. Not a big fan of the rough finish, but hey, it's your call and it certainly makes me think along different lines. Do it the way that you enjoy!
Thanks mate. This was an experiment at best. I was hoping the paint would hide the hideous scars in the foam but it didn’t. So I went with a yellow tint and that also didn’t. So last resort I though fck it and made it look trashy. I mean it already did haha
Like your vids and appreciate the work you’re putting in. Ha ha! You’re not an “Influencer” yet is possibly why no answer from FCS. I think we all know Futures are a better system anyways🤟 Great to see the surfing too, particularly on something you’ve crafted. Power on with your quality product👍
Thanks mate 🤙 Yeh I’ve had a few bad experiences with fcs customer service before but this blows my mind. All I want to know is why ? Nothing was hit in the surf.. it just fell apart. I wasn’t chasing a freebie just an explanation I’m 100% a futures guy now..
Frankenstein looks like a FireWire volcanic seaside but in yellow. It don’t surf like a seaside even on the second attempt… it’s slow. Nice attempt at recycling that blank.
Great 👍 I definitely like the board testing clips...board looks great...but...yeah...guess it doesn't suit solid WA 😂 Good on you for giving it a go, looking forward to the next project
Great video and music. Inspired move glueing those rails on. Great to see someone glass a board and plugs the right way too. Shame it didn't turn out better. What happened re.FCS failure?
Thanks mate. It was an experiment so it was always going to be hit and miss. FCS basically told me it was my fault and I hit something ( when I know for a fact I didn’t ) so I told them to stuff it. The fin just blew apart under stress.
Nice project and great quality videos. It's interesting to see the build process. How about some repair videos? Help us to keep our boards in the water and not in the trash.
awesome job m8, i really enjoy ur videos, the board came out looking sick. Athough your solo board builds are very complete i loved seeing the surfing part of this one. i know that is a looot of work to do the videos so the surfing films u can do rarely when u feel like it to spice things up ehehe keep it up🤙🏽
I really enjoy your vids and this one in particular, thanks! Widening the blank with off cuts was clever and the surfing footage is a great bonus. In general, I appreciate how generous you are with your tips, tricks and knowledge, thanks. Could you please do a flax (hemp) cloth lamination with epoxy? Perhaps over paulownia? I’m about to give that a go and there isn’t much information about the process out there. If not, no worries, just keep up the good work! 🤙🏼
No you use sanding resin. It’s just lam resin with a wax additive to make the resin sandable. Originally I wanted to see if the yellow paint would hide the scars but it didn’t so I put some pigment into the resin.
@@Shrednaught hahaha about time.. After Nick showing me the error of my ways.. :P I do feel futures lead the way with variety of fin choice, and even the box design.. having the flanges front and back do help with preventing that box sinking (like fcs2 are prone to do). But when they do go.. they make a mess.
Great effort. I found a broken longboard that I want to make into a mini Simmons. Is there a good method to peeling all the fiber glass off? Thinking of shallow cuts and pry with putty knife?
Thanks mate. It’s always better to try upcycle rather than just throw it out. To get the glass off you can use a dremel or jigsaw and cut very thinly along the rails. From there you can pry up. You will lose some foam so try to make sure the shape you’re attempting to get out of the broken board has enough space to allow for the lost foam. Good luck 🤙
Whats the best way to get into shaping? Not many people are handing out apprenticeships! Selt taught seems to be the way most shapers started anyway? 🤙
Yeh you're correct. Its not a skill that is recognised as a trade so unfortunately you can't really find a way in unless you have a shaper that's willing to teach. Most people ( myself included ) are self taught and that is years of trial and error and research put it to just get a board that resembles something surf able... That was my initial reason for this channel. To help show some tricks I've learnt along the years.
Almost certainly a dumb question, but what's to prevent someone from piecing together some blocks of hard packing foam (the kind used for flat screen TVs and such) to make a blank? With the fiberglass resin melt it? Is it not durable enough? ... Thanks for the video.
Not a dumb question at all mate. Nothing really.. the only real issue is strength. The packing foam is generally a really low grade eps with large beads. The beads make it hard to get a nice smooth shape and the low strength increases snapping and heel dents. Some of those strength issues can be overcome with the appropriate glassing schedule. Also incorporating a stringer would help. Also the glue lines between pieces of foam can be an issue to shape as it’s harder than the surrounding foam. BUT I have seen it done and I personally think it’s awesome. Better than just throwing it in the rubbish.
hey man would you mind showing or mentioning the products you use for the different processes? im getting into shaping and, besides the obvious laminating resins and tools and others,id love to know how you glued both blanks and what you used as a filler! thanks, the vids are sick!!!! thanks for the effort!
Love it all. Board looks awesome, waves are awesome. Where in Marg's is that? Bloody great job. Tempted to give this a go. Great videos. Curious, where do you get your new blanks from? Keep the awesome vids coming.
Thanks mate. It was a bit of a dog but the neighbours kid enjoys it. Always worth having a go. I get my new blanks from colin Earle surf supplies and he gets them from burford.
What kind of top coat do you apply at the end with a roll on and that gives such a cool looking matte finish? Is it Poly? Did you sand after that last top coat to get the matte finish? Cheers
Hey thanks for sharing all your videos first of all. I have a board that needs a major repair and i want to strengthen. The board is not old but very light and fragile. It is already very thin so i think delaminating and reshapingis out of question but how do i fix all the little presure dents over the deck? Any thoughts?
Thanks for watching. Without seeing the board it’s hard to answer but if it’s just heel dents on the deck of the board your best to just leave them and surf. Next board ask for a stronger glass job on the deck. 6/4 is a good start for a normal board
I was honestly thinking the same whilst out there. He took quite a few beatings. And I don’t want this to sound derogatory because it’s not, the dude was inspiring. But imagine a caterpillar. Kinda used his chest and shoulders and snuck his legs up under. Super impressive.
Awesome vid on the process of this build! And the testing at end!..Lots of ideas, got a few oldies in my shed...What sort of glue did you use on the rippings to make board wider?...Blanks here in NZ are around 120-150$nz, so good to save a few $ while in covid times...Glue give u any issues while shaping? Many thanks great vids.
Thanks mate. I used gorilla glue although the wrong one, as it was all I could find. You want to use the brown honey type expanding poly one that gorilla glue make. It does dry slightly harder than the foam but you can still shape it. I’ve reshaped a bunch of old shapes so it’s definitely worth a crack.
Because of you I wanna shape my own board and ride it really bad! :D But I only have a tiny outdoor wooden bike shed, Is it possible to shape and glass in a sub optimal place like that if I maybe hang some plastic from the ceeling to try and make it a bit more wind proof and stuff ? :D
Yo sick vid! About to make my first board... have you got any tips as to where to place the fin box in terms of how far up it is from the tail? planning to do a 7ft rounded pintail, with a single fin. Cheers
Thanks mate. Depends on the box size you’re using but a good range is anywhere between 6-8 inch up from tail. If you have the fin you can use that as a guide as well. What looks right to the eye generally works 🤙
Didn’t think about adding scrap rail foam to the blank. Looks sick 🤙🏽
It was a process that’s for sure haha
Onya bro I've been upcycling boards here in Raglan NZ...cool idea reusing rail cutoffs I often struggle to maintain widths after removing old glass...the more we embrace this the better, Chur massive
Awesome stuff mate. Best way to keep them outta the garbage. Yew! 🤙
What about splitting down the middle and adding a strip of foam
Yeh that could definitely work.
Bro... I'm 3 minutes in and so far have noticed we share the same pants, sander and vacuum. Bloody eerie mate!
Love this recycle project, fantastic job.
Thanks mate 🤙
I like the mixture of both the build and the surf of the build after 😎
I like it as well. Puts it all into perspective. Its a shame its so hard to find someone to film around here..
so much fun to watch, from start to ride. I always enjoy your build videos, but this Build+Surf combo is the best!
Yew! Thanks dude. I’ll try get more surfing in the future videos 🤙
Awesome video. Liked that you include the surfing!
hell yea more surf footage, this was a perfect video
Thanks mate 🤘
The board look so sick !!! love the design !!! keep it that way super video
Yew! Cheers mate 🤙
You're a great neighbor. Really enjoyed this.
Thanks mate. Instead of sugar we do surfboards 🤣
I love that sand through look, and now I’ve seen how it’s done I might have to try it on my next one. Thanks for the vids man, they’re some of the better ones on here. 🤙🏼
Yeh I really like it. Give it a go 🤙
Restoring stuff is cool. Especially restoring cool stuff. 🍻
The surf footage was deff a nice touch to complete the board building journey man. Would love to watch more of it when possible for your future vids!
Thanks mate. I’ll definitely try get some more footage. Next time with a proper board 😅
Shrednaught Man the footage was super fun, loved the adventure. Thanks doing for what you do, learning heaps! 👊🤙
Nice. I restored/reshaped one that the PU foam/surfboard was in a swamp for a few years. Lots of work and lost a few hundreds dollars as well.
In a swamp is different!
Love the look on that board. Never thought that leaving the cut laps would look so cool. Trashy style, yes sir! Excellent videos and boards.
Yew! Cheers 🤙
Mate that turned out SO nice!!!
That's as good of a way to waste time as any.
I'm working on a surfboard I found in the trash, right now. Thanks for the tips.
Good luck mate 🤙
Durisimo. For the win. Seems like riding on a leaf, awesome rescue. Really nice surf progression, keep it up and thanks for sharing!
Thanks mate 🤙
I like you adding surfing video of your shapes board!!! Keep it more
Yew! Thanks man
Top job bro, great idea sticking the offcuts on the old blank. Always entertaining and educational bro. Well done🤙
Thanks mate, appreciate it 🤙
So sick! You guys were ripping that thing, love the surfing footy. No idea you could use rail scraps like that. Might have to try this!
Bro sick build, that sound track thou🤘
great work.
i'm in the middle of doing a project like this and got here great tips. thx.
Awesome. Good luck 🤙
Enjoyed it all .. Thanks
Thanks for watching 🤙
Pretty fun as usual!! nicely done mate!
Thanks man
Really nice work! Congrats!
Sweet build
Thanks mate 🤙
Awesome vid!!!
🤘
yeah man! more surf videos and more surfboars reviews! amazing videos. i watch you from portugal!
Yew! Thanks man 🤙
Waves looks sick! Board might just need the right fins for that size of wave or it might be too big for it. Interested to hear what happened to the fin looks like when you delam or break a snowboard.
Definitely too big on my section. It’s definitely not made for big surf 😂
@@Shrednaught You never know till you try it though haha
Cuando hay amor por lo que se hace salen estas cosas, se nota el amor que le tienes a tu trabajo. Quedó una tabla de 💯💪💪, congratulletion!!!
good video.I like your shop and tools. I haven't shaped in 25 years. but watching this makes me think I would like to start again. too bad the board didn't go so well, maybe for another surfer it might shred
It’s like riding a bike mate. You’ll never forget, although maybe a bit rusty.
Yeh the board was always going to be a dog. But I don’t mind wasting a bit of time to experiment and try keep some rubbish outta the landfill. 🤙
Enjoyed the build, looked mad.
Yew! Thanks 🤙
Thank you for this really interesting video. I love the de-stress look too.
Thanks mate 🤙
Flip bru I love your work!!!! This stuck looks brilliant and a whole lot of fun!
Yew! Thanks mate 🤙
Love the different projects you're making. Keeping it interesting rather than building the same fish over and over
Thanks. Yeh I’ve been trying to think of new projects. Watching boards being built will eventually feel like watching re runs so I’ll try change it up as much as possible
legend surfing with floppy disc fins!
😅
Nice project man. Curious about you rolling on the gloss coat instead of painting it on. Is it to avoid having to sand and Polish afterwards? And are you doing epoxy or poly resin?
Thanks man. That’s just an acrylic seal coat. No resin. I do it with both epoxy and poly. I’ll send ya some more detailed info on insta msg in a bit. This is secret sauce stuff! Haha
I was wondering about that roll on coat too 😁 love the surf footage! More of that would be cool to see.
I’ll dm ya on Insta too mate 🤙
This was EPIC!!! So many cool ideas to save that blank from the bin! Love the channel 🙌
@@MrRickyrecon yew! Thanks
Another great video dude! Loved the bonus surfing footage, you always wonder how the finished board goes, shame FCS spoilt the party!!!
One thing that would be really helpful is some info like how much resin you mixed for particular jobs etc.
Loving your videos!!!
Thanks mate. The first surf was way too big anyways but I had to commit with the photographer there haha.
For resin it changes from board to board and mostly it’s just an educated guess when I’m about to laminate. I think green light have a good chart you can reference
nice little shooter
Epic! What glue did you use to attach the extra foam on the rails? Epic paint finish! Did you roll over clear coat at the end? Sick. I was gonna comment that it looked like you fully lost a fin out there! 😀. You could notice it after the 17:00 min mark. You actually did pretty good with that kooked fin
cool board and I like the resin tint.
Thanks mate 🤘
So sick. LOVED IT ❤❤
Thanks for new upload cheers 🔥👍
🤘
The best...love mate...from Indo.
Yew! Thanks mate 🤘
your an absolute charger!!! respect
I’m pretty experienced at getting a good beat down haha 🤙
finding this channel was a blessing
Yew!
Hello from the UK. Awesome job, just discovered your channel, liked and subbed 🤙
Cheers mate 🍻
Nice work Lord! Sick seeing a shaping channel
Yew! Thanks mate 🤘
I did the whole head bobble as you wound down that road.. knowing that exact stretch well.. :P Good little vid mate.
Yew!
Sick video as always I love the sanded yellow and black finish
Thanks mate 🤙
surfing footy was a great addition
Thank mate
Great to see others saving old stuff and getting back into the game, nice work dude ✌🪖💙
🤙
ken would be proud
Nice job on Frankenstein board reconstruction. It might work better with Large amd uptight fins for more bite and drive.
Upright fins
Yeh I never tried it with the upright style twins. I donated it to the neighbours kids so they can play around on it 🤙
@@Shrednaught 🙌
Great job, really enjoyed the step by step process. I make rc planes out of foam and use a hotwire for a lot of cutting and shaping. Also wondering why you paint before glassing? Fascinating similarities and differences. Not a big fan of the rough finish, but hey, it's your call and it certainly makes me think along different lines. Do it the way that you enjoy!
Thanks mate. This was an experiment at best. I was hoping the paint would hide the hideous scars in the foam but it didn’t. So I went with a yellow tint and that also didn’t. So last resort I though fck it and made it look trashy. I mean it already did haha
I love the distressed look!
Yew 🤘
Like your vids and appreciate the work you’re putting in. Ha ha! You’re not an “Influencer” yet is possibly why no answer from FCS.
I think we all know Futures are a better system anyways🤟
Great to see the surfing too, particularly on something you’ve crafted.
Power on with your quality product👍
Thanks mate 🤙
Yeh I’ve had a few bad experiences with fcs customer service before but this blows my mind. All I want to know is why ? Nothing was hit in the surf.. it just fell apart. I wasn’t chasing a freebie just an explanation
I’m 100% a futures guy now..
What a video, great shots and mood
Thanks 🤙
@@Shrednaught cheers 🤙
Frankenstein looks like a FireWire volcanic seaside but in yellow. It don’t surf like a seaside even on the second attempt… it’s slow. Nice attempt at recycling that blank.
Great 👍
I definitely like the board testing clips...board looks great...but...yeah...guess it doesn't suit solid WA 😂
Good on you for giving it a go, looking forward to the next project
Thanks mate. Haha yeh think it needs to be slightly longer for those waves.
Great video and music. Inspired move glueing those rails on. Great to see someone glass a board and plugs the right way too. Shame it didn't turn out better. What happened re.FCS failure?
Thanks mate. It was an experiment so it was always going to be hit and miss.
FCS basically told me it was my fault and I hit something ( when I know for a fact I didn’t ) so I told them to stuff it. The fin just blew apart under stress.
@@Shrednaught I wonder if this has happened to other surfers? Companies will never admit fault to products.
Me: "as if he's putting in fcs2 boxes, that shit gon break."
Shrednaught: breaks fin the very first session
Nice project and great quality videos. It's interesting to see the build process. How about some repair videos? Help us to keep our boards in the water and not in the trash.
Got ya covered mate. Filming a ding repair video as we speak 🤘
Dude this is rad! Unreal job. Love the vids 🔥🔥
Yew! Thanks man 🤙
awesome job m8, i really enjoy ur videos, the board came out looking sick.
Athough your solo board builds are very complete i loved seeing the surfing part of this one.
i know that is a looot of work to do the videos so the surfing films u can do rarely when u feel like it to spice things up ehehe
keep it up🤙🏽
Thanks mate. Yeh I enjoy the surfing clips as it means I get to surf haha
Wow! Really enjoyed watching it!! I would blame likely the fins not the board in the first session. Keep up the great work💪🏼💪🏼💪🏼
Yew! Thanks mate 🤙
I really enjoy your vids and this one in particular, thanks! Widening the blank with off cuts was clever and the surfing footage is a great bonus. In general, I appreciate how generous you are with your tips, tricks and knowledge, thanks.
Could you please do a flax (hemp) cloth lamination with epoxy? Perhaps over paulownia? I’m about to give that a go and there isn’t much information about the process out there. If not, no worries, just keep up the good work! 🤙🏼
I’ve never done flax but I really want to give it a try. I’ll see if I can wrangle some
up 🤙
@@Shrednaught sounds good!
Awesome video 🙌🏽
Yew!
This was sick
Yew! Thanks 🤙
Love the music who is it. Cool project.
What´s the song that starts on 0:45?
What did you fill in the rail with on the deck. Looked like drywall mud.
Yup. Just everyday normal spackle
do you use the same resin on the hot coat ? and why did you spray it if the resin had pigment in it
No you use sanding resin. It’s just lam resin with a wax additive to make the resin sandable.
Originally I wanted to see if the yellow paint would hide the scars but it didn’t so I put some pigment into the resin.
turned an overripe surfboard into an overripe banana, love it!
Haha 🤙
Epic brah 🖖
Yew 🤘
I feel like we had a conversation about fin brands a few years ago.......... Done well mate. A lot of work but I'm sure it was fun.
Haha yeh no doubt. Sucker for punishment
You couldn't convert Mitch to futures hey Nick? At least some of saw the light.. :P
I’m converted now I swear 😅
@@Shrednaught hahaha about time.. After Nick showing me the error of my ways.. :P I do feel futures lead the way with variety of fin choice, and even the box design.. having the flanges front and back do help with preventing that box sinking (like fcs2 are prone to do). But when they do go.. they make a mess.
@@ZAGSurfboards yuh the fin choice is wayyy better. As is the customer service 🤣
I don’t know who owns that board now, but I did a ding repair on the nose of that thing. Lol. Or one exactly like it.
Must of been a very similar board? That’s crazy haha
Great effort. I found a broken longboard that I want to make into a mini Simmons. Is there a good method to peeling all the fiber glass off? Thinking of shallow cuts and pry with putty knife?
Thanks mate. It’s always better to try upcycle rather than just throw it out.
To get the glass off you can use a dremel or jigsaw and cut very thinly along the rails. From there you can pry up. You will lose some foam so try to make sure the shape you’re attempting to get out of the broken board has enough space to allow for the lost foam.
Good luck 🤙
Realy nice work brow, whats the name the first song?
Whats the best way to get into shaping? Not many people are handing out apprenticeships! Selt taught seems to be the way most shapers started anyway? 🤙
Yeh you're correct. Its not a skill that is recognised as a trade so unfortunately you can't really find a way in unless you have a shaper that's willing to teach. Most people ( myself included ) are self taught and that is years of trial and error and research put it to just get a board that resembles something surf able...
That was my initial reason for this channel. To help show some tricks I've learnt along the years.
Almost certainly a dumb question, but what's to prevent someone from piecing together some blocks of hard packing foam (the kind used for flat screen TVs and such) to make a blank? With the fiberglass resin melt it? Is it not durable enough? ... Thanks for the video.
Not a dumb question at all mate.
Nothing really.. the only real issue is strength. The packing foam is generally a really low grade eps with large beads. The beads make it hard to get a nice smooth shape and the low strength increases snapping and heel dents. Some of those strength issues can be overcome with the appropriate glassing schedule. Also incorporating a stringer would help. Also the glue lines between pieces of foam can be an issue to shape as it’s harder than the surrounding foam. BUT I have seen it done and I personally think it’s awesome. Better than just throwing it in the rubbish.
What kinda fins did you put on it? Looks like it was sliding out on you a lot. Such a sick build tho🤙🏽
Ah i see you got keels
hey man would you mind showing or mentioning the products you use for the different processes? im getting into shaping and, besides the obvious laminating resins and tools and others,id love to know how you glued both blanks and what you used as a filler! thanks, the vids are sick!!!! thanks for the effort!
I definitely try to do that for future vids man. Thanks for watching. Yew!
Hey brother, I'm Bill from Arizona. What is the best way to laminate sheets of EPS together?
Love it all. Board looks awesome, waves are awesome. Where in Marg's is that? Bloody great job. Tempted to give this a go. Great videos. Curious, where do you get your new blanks from? Keep the awesome vids coming.
Thanks mate. It was a bit of a dog but the neighbours kid enjoys it. Always worth having a go. I get my new blanks from colin Earle surf supplies and he gets them from burford.
What kind of top coat do you apply at the end with a roll on and that gives such a cool looking matte finish? Is it Poly? Did you sand after that last top coat to get the matte finish?
Cheers
Clear acrylic sealer. I just give it a light buff with 360+ grit to take the dust grit out and give it a matte finish
Great 👍thanks
A guy with no arms surfing with a guy with no eyebrows ?!
Hahah it’s a straight up party out there 🎉
awesome content! 🤙graphics is sick on that board!
sorry to hear that they dont respond about snapped fin
Thanks mate 🤘
cool vid.
Hey thanks for sharing all your videos first of all. I have a board that needs a major repair and i want to strengthen. The board is not old but very light and fragile. It is already very thin so i think delaminating and reshapingis out of question but how do i fix all the little presure dents over the deck? Any thoughts?
Thanks for watching. Without seeing the board it’s hard to answer but if it’s just heel dents on the deck of the board your best to just leave them and surf. Next board ask for a stronger glass job on the deck. 6/4 is a good start for a normal board
nice video!
Cheers 🤙
How did you remove the front handle knob thing on your planer ? Do you just keep spinning it or is there a trick to it?
You’d have to consult the manual for the planer you have.
@@Shrednaught have the makita one too! I’ll have to find the manual! Thanks mate
Ah sick. I’ll have a quick squizz. I think I got the box around here somewhere
Hello, I enjoy watching your videos every time. By the way, do you sell T-shirts with your logo or skull pattern?
Thanks 🤘 I don’t sell them yet but I am working on it. Stay tuned!
How do you remove a coat of resin and glass if it wasn’t done correctly?
What did you use to fix the new foam to the blank, resin?
Gorilla glue. The expanding brown one. You could use resin but it’s harder to shape when it goes hard
16:51 I wasn’t even surprised at his falling off the wave bc I was focused on the guy next to him just kicking his legs in the water 😂
That dude that was just kicking his legs had no arms man. Literally no arms. Insane
@@Shrednaught geez i feel bad now but how would he pop up on a wave?
I was honestly thinking the same whilst out there. He took quite a few beatings. And I don’t want this to sound derogatory because it’s not, the dude was inspiring. But imagine a caterpillar. Kinda used his chest and shoulders and snuck his legs up under. Super impressive.
Awesome vid on the process of this build! And the testing at end!..Lots of ideas, got a few oldies in my shed...What sort of glue did you use on the rippings to make board wider?...Blanks here in NZ are around 120-150$nz, so good to save a few $ while in covid times...Glue give u any issues while shaping? Many thanks great vids.
Thanks mate. I used gorilla glue although the wrong one, as it was all I could find. You want to use the brown honey type expanding poly one that gorilla glue make.
It does dry slightly harder than the foam but you can still shape it. I’ve reshaped a bunch of old shapes so it’s definitely worth a crack.
Because of you I wanna shape my own board and ride it really bad! :D But I only have a tiny outdoor wooden bike shed, Is it possible to shape and glass in a sub optimal place like that if I maybe hang some plastic from the ceeling to try and make it a bit more wind proof and stuff ? :D
Yeh definitely possible. Just do your best to contain the environment and you’re half way there
@@Shrednaught i'll give it a go then! :D
Yo sick vid! About to make my first board... have you got any tips as to where to place the fin box in terms of how far up it is from the tail? planning to do a 7ft rounded pintail, with a single fin. Cheers
Thanks mate. Depends on the box size you’re using but a good range is anywhere between 6-8 inch up from tail. If you have the fin you can use that as a guide as well. What looks right to the eye generally works 🤙
Shrednaught right on dude thanks!
🤙