I'd suggest using 5w40 or 5w50 oil as those a proven to be better in N54. They always have high oil temps anyway and good oil is crucial now that you are pushing 2x the stock power. Everyone here in Germany runs 5w50 without problems so you might wanna look into that. Cheers!
What do ya'll (in terms of brand and type of oil) run in Germany? I'm surprised u say so viele Leute use 50 weight considering even here in the American South, a lot stick to 40. I think 50 makes sense for track, drawback on street is it takes longer to come up to temp and do its sloshing.
@@cosmin1574Castrol 530 as that's what it was designed to run. Also replace all 4 springs if you haven't done it yet or you will be into struts as well when they break and they WILL break. To back that up, I've owned an 08, an 11 and my buddy has the same 08. Multiple springs broke on all 3 cars so it's no longer a coincidence at that point.
Damn this is literally one of my goals I always wanted to swap the turbos on a 335 with a big single turbo. I can’t believe you swapped them yourself that’s amazing bro
You should ditch the GFB and connect your MAC solenoid directly to the DME and allow MHD to regulate/control it. Should also look into getting Motiv Reflex+/lite for PI and ethanol content. Cheers, I just single turbo’d my 335is 😎
@@DannyZee Danny - did you change the rear axl on this vehicle and if you did, do you have a video illustrating the axl change....? Thanks for your time and awesome videos brother
Recently started watching you and I have to say it is some of the best videos I've seen in a while on RUclips. Great build, enjoy it and keep making GOD-tier videos!
Need heat shielding on engine cover ...cut if needed next to turbo. Turbo blanket, wrap by oil feed line. Heat shield the oil line or it will catch on fire from turbo compressor heat ..Use 5w40 weight oil Lil heavier for wear on components. 60 rolls only. Have turner set it so you boost doesn't ramp in at low rpm range pushing a rod. Only Shell gasoline. Everything else dries out index injectors. Gonna need wider tires 295 Hankook v12 to get traction plus m3 differential and bilsten heavy duty 😲 shocks. But keep it 550hp till you get set up.. Oh once you run e85 drain oil every 🙄 time. E85 draws moisture into crank case ..causing spun bearings. With the age of your mother it's 50/50.
Question why do you need to drop the whole sub frame? And remove the sway bar along with everything else? I like watching this channel. But couldn't you loosen the motor mounts lift the motor up. Remove the air intake n the coolant hoses on that side.
Hell yeah! Please put turbo blanket on asap. They're known to melt valve cover since they're right on top of each other. Make sure get good quality blanket. Look into Funk Motorsports one.
First of all, I wanna say that this build series it's really really fun to watch, I've learn a few things in your videos and recently bought a 135i n54! Have you thought of making a video talking about the budget that you spent on your supercar slayer?! I'm curious! Keep up! 🤙
the clone effect is really funny! maybe use a feather on the border of the frame to blend the shots more so you can't see the harsh cut. Keep on going man! very good content!
Good job Danny it's a huge job to do. I've got a kit on my bench for my 350z and I'm just going pass it up and sale the kit take my losses. It's a huge money pit job. But you did boss good job again
Dope videos started watching this build not to long ago only thing is i feel like less music would be better its kind of annoying imo but over all dope content
"OG" and hellz yeah bro this gonna be fire , i love PSR turbos as i run a grx3071r gen 2 from them on my bored over forged NA miata and run 30psi on da reg as a daily n not a single issue , great turbos specially for the price as compared to like garret "same quality imo"... Keep killing it danny much love n respect broski keep it rad stay safe and build on peace brotha and enjoy the fudge Outta the build .. 🤘💪✌️
Please put index 12s in it don't pull an Adam LZ he never got to enjoy the car because it never ran right without them. Run B58 coils and plugs if you are gonna push 600+WHP.
Respect to you for all that work and you even made it fun…..some how,I love bmw but that’s the reason I wouldn’t own one,to hard to work on,bloody night mare but then I’m not as young as you lol
![[DRAGON BALL LEGENDS REVEALS ＆ STUFF] LEGENDS FESTIVAL 2024 Special Edition Part 1](http://i.ytimg.com/vi/mV5bGIswTtQ/mqdefault.jpg)
GET THE SEASON 2 MERCH DROP HERE!! (so I don't have to go stand in a corner) thedrivenlegends.com/
❤❤❤❤❤is a great experience 🎉🎉🥰🥰BWM❤❤MERC❤❤
i ordered my hoodie😁😁
copped me a jet tag brotha ❤ keep it up
Put interior lighting in it
I’m from the hood I watch even rewatch u the best I just followed u 💯 u got fans everywhere
I didn’t think I could fall in love with a 335 on the internet as hard as I have for your car. I love all the mods, mad respect my guy.
I'd suggest using 5w40 or 5w50 oil as those a proven to be better in N54. They always have high oil temps anyway and good oil is crucial now that you are pushing 2x the stock power. Everyone here in Germany runs 5w50 without problems so you might wanna look into that. Cheers!
Man you ain’t never lied, my N52 always have High Oil temps but I just believe most if not all have high ass temps 😂💵
What do ya'll (in terms of brand and type of oil) run in Germany?
I'm surprised u say so viele Leute use 50 weight considering even here in the American South, a lot stick to 40.
I think 50 makes sense for track, drawback on street is it takes longer to come up to temp and do its sloshing.
I use 5w50 on every single fast car i own. Its just good on high performance engines.
I have 2009 316i should I use 5w30 or 5w40
@@cosmin1574Castrol 530 as that's what it was designed to run. Also replace all 4 springs if you haven't done it yet or you will be into struts as well when they break and they WILL break. To back that up, I've owned an 08, an 11 and my buddy has the same 08. Multiple springs broke on all 3 cars so it's no longer a coincidence at that point.
Damn this is literally one of my goals I always wanted to swap the turbos on a 335 with a big single turbo. I can’t believe you swapped them yourself that’s amazing bro
If you have patience, two days, youtube, tools and MOST importantly a lift (!! I dream of one) you can do it too 😉
@@papa_pt don’t got a lift but I got the rest! And I will make it!
You should ditch the GFB and connect your MAC solenoid directly to the DME and allow MHD to regulate/control it.
Should also look into getting Motiv Reflex+/lite for PI and ethanol content.
Cheers, I just single turbo’d my 335is 😎
Gotta love the convos between him and him 😂
The excitement cannot be contained! Awesome video Danny!! 🔥
Wild that's the same kit I have ordered from speedtech and just waiting on it to be shipped.
Sick! Definitely need some sort of heat protection, maybe a turbo beanie or heat shield ? Will definitely get hot next to your coil packs n what not
bro u gotta post more, i can't get enough
ur car is amazing danny istggg. I love the z and bmw, i love both of them❤
Every time I watch your videos it just forces me to get up and go work on my car. Whether something is wrong or not 🤓 car line up is OP btw 🔥
That’s crazy you have literally done everything I wanna do to my 335is In span of a couple of months
I would put some insulation over that turbo hot side before you burn your hood up. Nice build can’t wait to see her tuned!
This series is soo fricking coooool, keep up the positivity!!
Love the content❤
Thanks so much
@@DannyZee Danny - did you change the rear axl on this vehicle and if you did, do you have a video illustrating the axl change....? Thanks for your time and awesome videos brother
"I have no idea what I'm doing" ...and then dismantled half of the car 😄
Love the new season 2 drop Danny! Already bought a hoodie and tag, can’t wait.🎉🎉
Thanks so much!
Recently started watching you and I have to say it is some of the best videos I've seen in a while on RUclips. Great build, enjoy it and keep making GOD-tier videos!
Thank you very much!
Love u bro ❤
that front bumper looks clean!! where ya get it?
HE DANNY YOU SHOULD INSTALL A CRASH BAR TO KEEP THE CAR STABLE AND SAFE
GET A HEAT sock for the turbo makes it look cleaner as well in my opinion
you have good energy bro, subbed
its always good coming home from work and eating dinner and seeing Danny z uploaded
Need heat shielding on engine cover ...cut if needed next to turbo. Turbo blanket, wrap by oil feed line. Heat shield the oil line or it will catch on fire from turbo compressor heat ..Use 5w40 weight oil Lil heavier for wear on components. 60 rolls only. Have turner set it so you boost doesn't ramp in at low rpm range pushing a rod. Only Shell gasoline. Everything else dries out index injectors. Gonna need wider tires 295 Hankook v12 to get traction plus m3 differential and bilsten heavy duty 😲 shocks. But keep it 550hp till you get set up..
Oh once you run e85 drain oil every 🙄 time. E85 draws moisture into crank case ..causing spun bearings. With the age of your mother it's 50/50.
Ah yes your "slow" 335i.
Yeah seriously, the thing has 300HP…
My 11 hits 60 in 4.7s bone stock. That is FAR from slow. Anything 6s or less is officially fast as fuck boooi.
The single turbo makes it more reliable because the twin turbos had many issues (correct me if I am wrong)
Love Danny Sundays 😍
🙏❤️
Question why do you need to drop the whole sub frame? And remove the sway bar along with everything else? I like watching this channel.
But couldn't you loosen the motor mounts lift the motor up. Remove the air intake n the coolant hoses on that side.
Love it!! Had to subscribe man. Thanks for the content!
Thanks for the sub!
9:30 "They ain't believe in us, God did!!!!"
Btw: OG
Hell yeah! Please put turbo blanket on asap. They're known to melt valve cover since they're right on top of each other. Make sure get good quality blanket. Look into Funk Motorsports one.
Can you add a total parts cost list at the end of this series, including everything exterior, interior, engine anything you’ve done to the car.
You’ll be seeing a montage of building the entire car and everything single part installed!
Was keenly waiting for this upgrade. The whole series is lit. Feels like this is my dream built #bimmerfam
That sound startup so loud dayummmmm..cant wait next videos upload😍
Gloss black style 95 wheels 19x9/10 would complete the look bro!
bro please restock merch now i need this
Goodshit bro! the turbo install is harrrrrrrd work!! i did a Big boost kit on my N55
Go motive reflex when you go port injection. It will control port , second fuel pump and the boost pressure all in 1
First of all, I wanna say that this build series it's really really fun to watch, I've learn a few things in your videos and recently bought a 135i n54! Have you thought of making a video talking about the budget that you spent on your supercar slayer?! I'm curious! Keep up! 🤙
U killed it bro
Nice work !!!!!!!
Thank you!!
I was genuinely happy for you and this is the first video I see 🔥
Thanks so much
Favourite car youtuber cumfrmd 🔥🔥🔥🔥
❤️❤️🙏
Wet your exhaust heat wrap when installing
Best series I've watched in a long time!
That means a lot 🙏
I had mine hybrid 35i tuned by JSR.
Alternatively Wedge performance seem to be great to
🔥🔥🔥 stay blessed 🙏🏼 can’t wait for the next vid!!! 🏎️💨
Mad respect to people like you🎉
Probbably the best car youtuber out here ❤
❤️❤️
Danny boi got that baby German 2JZ now.
Hehe
Congrats man ! beautiful 335 ❕
the clone effect is really funny! maybe use a feather on the border of the frame to blend the shots more so you can't see the harsh cut. Keep on going man! very good content!
I can't believe this is the same car you bought some time ago. Absolutely awesome man
Nuts!!
Bro be careful with break lines burning from the turbo I’ve heard it happens a few times make sure ur break lines are clear from the heat
Dang it…..gotta wait for the next video……exciting brah!
Originally only bought the tag, went back to cop the hoodie as well 🫣 best merch in the game
W Move 🫶
that turbo looks might close to the top of the engine there.... will the heat not melt wires and packs etc ????
Love your energy my guy!
OG! This is literally the build i want to do
Dude, your channel is great!! I am just as happy as you when that turbo fell into place!!
Also, single exit exhaust?
You’re the reason why I’m looking for a 335i 😂😂😂🙏🏾
Haha lets goo
Respect 🫡 the hustle, this the universe telling me to upgrade my turbo 😂 🤷♂ ive been eyeing one just gotta jump on it
This really makes me want a turbo car lol
You got to
Can't wait for the dyno tune
OG. Been waiting on this brotha!
Good job Danny it's a huge job to do. I've got a kit on my bench for my 350z and I'm just going pass it up and sale the kit take my losses. It's a huge money pit job. But you did boss good job again
Dope videos started watching this build not to long ago only thing is i feel like less music would be better its kind of annoying imo but over all dope content
what a dream come true, amazing!
TRULY
What system do you use to connect to your OBD ? Or which do you think best ? I'd appreciate your opinion
Liked & sub’d my man! Your editing is fire!
Thanks so much
You should get some reliability mods like an oil cooler.
Inspiring build.
OG… can’t wait to see what you do next
seeing a lot of what i just did to my car here. except i was just replacing a bad starter and its in a stupid place (2008 528xi)
"OG" and hellz yeah bro this gonna be fire , i love PSR turbos as i run a grx3071r gen 2 from them on my bored over forged NA miata and run 30psi on da reg as a daily n not a single issue , great turbos specially for the price as compared to like garret "same quality imo"... Keep killing it danny much love n respect broski keep it rad stay safe and build on peace brotha and enjoy the fudge Outta the build .. 🤘💪✌️
Low key Danny because of u I want to buy a 335i again n fix up too.
Please put index 12s in it don't pull an Adam LZ he never got to enjoy the car because it never ran right without them. Run B58 coils and plugs if you are gonna push 600+WHP.
Trabajo duro al final paga yessir🤩
That merch is sickkkk bro im getting some for sure
Way to go bro, super motivating forsure 👍🏾
What is that front bumper called and where can I buy it?
u got a post LCI front bumper? from where?
Na na na pooowww is crazy 😂😂😂😂😂😂😂
ahh clif hanger on my last day of school holiday
Renene poww😂😂😂 loved the video bro keep up the great work ❤
Honestly bro i hated you at first but i have grown to come around 🤣🤣youre funny asf
155k mile car! Damn!!!! Making me want to strap a bigger turbo on my 2018 golf R lol. 147k mile car
Respect to you for all that work and you even made it fun…..some how,I love bmw but that’s the reason I wouldn’t own one,to hard to work on,bloody night mare but then I’m not as young as you lol
You still need some braum bucket seats, I'm waiting.
Watching from South Africa 🇿🇦🇿🇦❤
beautiful car, congratulations
Thanks!
😂 good shyt bro! Lovn the energy good to see you doing it all alone and making it happen when things pop up.!
Danny Sunday > Regular Sunday
love the build🔥
OG
LETS GOOO she lookin preeetty! Can’t wait to see her drive
OG content creator fs
Where can I find that set or kit and how much and where can I get them
danny… Brother… Are you on the JUICE? Dude is shredded 🤣😭
I love your content its just the best every video 😂
Been waiting to see this vid in my feed 🥵
The previous turbo looked kind of oily. Probably underperforming