@@ReelAnglerReviews You talking the inline 5? In canyons, or colorado? I'd guess so. But compression is probably about 10:1 so not more than 20psi. Plus tuning. Ebay turbos are cheap $200 amount, and are good for 15psi all day. Just watch out if you mean the inline 5 they have timing chain at front and rear of engine. Expensive job to replace.
Well, not the disease itself, hopefully, but the chaos it's caused in society, definitely. Though entertainment is good when you're sick, as well. But don't get sick, folks.
@@Xylo_TV maybe run diagnostics on it, see if you can safely tune the turbo on your rotary that can make enough power to keep you satisfied, and not have everything break lol. From what I know, Rotaries are great engines, but very unreliable at times
@@Apollo5752353 super unreliable i know lol. i was gonna pull the trigger and get a kit and if the motor goes, swap in a three rotor. (little backstory, this is just my project car. i’ve got the time and money to waste on it 😅)
Dear Donut, I would like to mf congratulate y'all this video blew me away!!!! Many of these dynamics can get fairly complicated, and can also applied to aerospace engineering. The way Zach explained things briefly but informatively gave people the right idea of what they were getting into, how much they understood watching their first time through, and just how ready they were to tackle this. Truly a great video, keep up the good work! I've seen this channel EXPLODE from just around 300k to now 4.45 million its insane and it hope it continues! The amount of effort just put into the sponsorship ad is insane, they are actually entertaining I don't even skip them anymore. All in all, this was a great video and I hope you guys continue on the path laid in front of you, things are looking great for us, your subscribes, and you guys! The more people that get to watch, the bigger the products and production can become for us and it's been such an enjoyable journey thus far. Sincercerely, Yellowfling
Last ad said he is going to save Jeremiah from being fired and he did so probably the next ad will actualy be about james of blowing his money and thats realy cool
@Mobile Terminaluser snap ons expensive yes but the statement you said instantly made me laugh because of how obvious it is you’ve never held a snap on tool
11:25 should've used a stethoscope or even just touching a wrench to the block/head and your ear so there's a direct connection for the sound to travel (amplify) to your ear. that's a good way to find leaks in pipes without having to drain and disassemble.
I LOVE James and Nolan, but Zach has got to be my favorite donut guy! Such a fun, quirky personality while also being like a super knowledgeable older brother! ❤️ Much love to all you donut bros
Or if you run low enough boost. Running conservative 5 PSI on my daily VW Bug. Even with that little boost it's still very helpful to make it less slow.
Thank you for showing the World how to do a leak down test and what it is; that’s some seriously crucial information any car owner should have access to.
You are so much better at this than all of those Saturday morning car and truck shows. Informative, funny, and you explain the information in a way anyone could understand. Good work.
Depending if u have a DOHC engine cause If u do ir going to spend hella money I have a SOHC bugeye rs and I want to but making a good build on stock engine is going to be a lot more expensive than making a STI swap
Speaking personally, I have a 2008 Subaru Forester which is supposed to be the best model years and it is biggest Piece of junk I have ever owned. Calling it a turd is a insult to turds everywhere
@@yamilmelendez2667 If it's an already turbo'ed engine from the factory, say the 1st gen Legacy Turbo (EJ22T), or any of the WRX's (bug eye and blob eye in this case with the EJ205), then yes. The EJ255 and EJ257 are great engines off the show room floor and if maintained properly, but the 2.5 liter Subaru engines have the worst of the problems of Subaru engines. Ringland failures, melted pistons, spun rod bearings, melted valves, and the worst of the head gasket issues. If the 2.5 liter turbo engines are built with beefier forged internals, MLS head gaskets and head studs, then absolutely go for a bigger turbo and moe powah babey. Now, the naturally aspirated EJ25s (EJ25D, EJ251, namely) are the worst ones to NA-T build. The 2.2 (naturally aspirated and the turbo ones) and 2.0 liter engines are the best ones from the factory with much stronger internals and have the least issues, and you may even be able to successfully turbo an EJ22 motor (depending on which one it is, and if it is a frankenmotor) for less than the price of an STI swap. The EJ22 motors have the same forged crankshaft and rods as an EJ20 WRX motor, but have larger pistons due to the bigger bore. Same engine casting, just a bigger bore in the EJ22. EJ25 is the biggest bore and have a longer stroke, but that's what makes them blow head gaskets much more due to thin cylinder walls and not very much support with an open deck block.
Man thank u for this series! I’m doing my turbo build now... engine is in the machine shop as I type this! So it’s fun to watch you do this as well ... it’s definitely helping to pass the time while my process is rolling!
We did, It’s on Northwest Exploration. If you see a profile pic with this type of white outline trace style, then it’s an account associated with Northwest Exploration.
Great video, Id like to add that it is top dead center compression. You noted that the valves should be closed, but for any body new to these tests, they should know that there are 2 top dead center positions. compression: where both intake and exhaust valves are closed, and overlap: where both intake and exhaust valves are slightly open. while putting a long tool in the spark plug hole is very helpful and a trick i use all the time, it doesnt give you tdcc, neither does lining up the timing marks. if the valve cover is off its pretty easy to tell either by having play in the rocker arms or visually watching the valves open and close or by the cam lobes facing away from the buckets. if the valve cover is on you can try to listen to the air being pushed out the spark plug hole on compression or do trial and error: if you have massive leak down on both intake and exhaust, you are likely on over lap, turn the motor 180 and test again. if you still have excessive leakage then you have a problem. If not, then great you found tdcc and have a good cylinder and valve seal.
The engine in the Miata was originally designed to have a turbo bolted onto it. When they left it off, they didn't change anything as they knew the tuning boys would want to put one back on.
"I got to go, James is about to blow all of his money" am I the only one that caught that??? earlier episode james did blow his money, love this running gag.
thank you for explaining the cylinder leak down test, ive always shied away from it because of all the extra steps in the instructions but your way is much easier
yep ! good stuff to do ! a couple years ago i was enjoying the boosted life and one day backing down the drive way noticed some blue puffs of smoke. Shut the car down got out the compression testor noticed cyl one was barely in the 100 psi range while the other 5 were normal in the 140 range. Got it top dead center and then started pressurizing the cyl, open the throttle, no sound, check the exhaust no sound, pop the oil cap WHOOSH. Immediately told me all the pressure is going past the rings. So now since then i've been saving up for my parts for the rebuild.
Hello I know this isn't the right video, but I just got a 93 Honda Prelude Si, a car I wanted when I saw your group talk about the history of it. When I saw that video and saw 4WS I was like " I need to find one" and I did. Now it needs some work and I have plans for it though I need to save up for the cost to fix it. I just wanted to say thank you for getting that car on my radar.
Does make a hell of a difference. I had a mx5 mk1 1.6 with a td04 turbo kit on with a switchible custom map and was absolutely brilliant. 140bhp 1st setting and 210bhp 2nd setting. Was absolute hoot to drive accept in the british rain..
Money Pit is one of my favorite things on RUclips right now. I already know most of what is being taught here, but it’s being presented in a way that’s new and simple, and I feel like my understanding of it is better now.
I have 3 "MONEY-PIT" cars.. I purchased 2 of them back in the 90's.. I just picked up my 3rd. money-pit. I want to put turbos or do turbo engine swaps on all of them.. This video is helpful..
I would like to know why 90% of diesel cars nowadays have turbo, but a bunch of gasoline cars doesnt, its a thing i really dont know, and you guys explain everything so well! Keep the work G’s
It was not Christopher Columbus it was Alfred Buchi who made the first turbocharger. As Mr Columbus was the person who explored the United States when they first explored the usa
For a leakdown test we use 80psi in aircraft piston engines. That's what I'd use in cars also. Except on planes we can hold the prop to keep it from moving off top dead center. With a car the clutch has to keep the engine from moving off TDC. So with 80psi it may start slipping one way or the the other.
Donut is forever blessed for putting a yellow bar during their ads.
even then, the ads they do are very entertaining
I kinda like watching the ads though
Genius!
@@therideanalyst6794 my favourite ad was the Hyundai i30 N that they did with Zach jobe and James pumphery
I also enjoy them. They're entertaining and the best part is I only have to watch them once.
TURBO STUFF ♥️
i will be half as fast as you soon
Donut if u see my comment
They are a bit I have seen them on lots of channel s botting
Example scrapman
Only took a year
"is your car safe to turbo?"
my 2005 chevy blazer: *sweats nervously*
4.2 vortec yes.
@@emanuelnamseth1469 will 3.5?
@@ReelAnglerReviews 3.5 what??
@@emanuelnamseth1469 you think you could turbo a 3.5 liter vortex can be
@@ReelAnglerReviews You talking the inline 5? In canyons, or colorado? I'd guess so. But compression is probably about 10:1 so not more than 20psi. Plus tuning. Ebay turbos are cheap $200 amount, and are good for 15psi all day.
Just watch out if you mean the inline 5 they have timing chain at front and rear of engine. Expensive job to replace.
Week 6: "THE TURBO BUILD IS COMPLETE"
Week 7: How to find a new healthy engine for your car.
Maybe finally they will take Rocketeer's V6 kit.
this had me rofl. but that is also the most common step.
Yeeeees. I can see this coming miles away also lolz.
No, week 7: in a long enough timeline everything gets an ls swap
"Is swapping an engine from another car worth it?"
Probably the only channel on youtube that makes the sponsored parts good enough to never skip them
Agree
Check out Daniel Thrasher
Best freakin sponsors ever.
Rich Rebuilds ads are hilarious.
veloster n ads were the best
Then u need to watch Comment Etiquette w Erik and his NordVPN ads
Zach taught me about compression and leakdown tests better than my college course did.
Carbon build up is free compression, never clean it 😁
This is the second time I’ve seen you in a donut comment section
Says the man that WD-40s literally everything
@@alexmartin5797 the car version of essential oils
Facts
@@alexmartin5797 it also helps compression..
ITS HERE ITS HERE EVERYONE STAY CALM
OH MY GOD, ITS HAPPENING
Fina-fuckin-lly
IM CALM!! YOU STAY CALM!! 😂
CALM WHATS CALM????
Everybody stay calm, everybody fucking calm down.... STAY FUCKING CALM!!!
I'd totally add a turbo to my car, but there isn't a kit for it.
It's a honda fit, lmao
damn
thailand baby.
Don’t gotta have a kit just parts and dimensions
you can make your own with a universal piping kit
Lmao im looking 4 a 2007 hhr base model and make tha bihh quickk
The fact that money pit is a thing makes covid-19 tolerable
Thank you florida man, very cool
Keeping the economy going by encouraging spending! 😝
Well, not the disease itself, hopefully, but the chaos it's caused in society, definitely. Though entertainment is good when you're sick, as well. But don't get sick, folks.
@Meme Man Those are signs of recession, my dude. Just because you don't feel it doesn't mean no one is.
Zach: Turbo stuff for the next 6 weeks baby!
[everyone liked that]
"Is Your Car Safe to Turbo?"
My Rx8 : Poops apex seals out of the exhaust
man that sucks i am sorry to hear that
@@doug5541 original engine from 07 still running strong lol I aint going to turbo it
Mine's from '06 and it's still running strong, but I really wanna turbo it lmao
@@Xylo_TV maybe run diagnostics on it, see if you can safely tune the turbo on your rotary that can make enough power to keep you satisfied, and not have everything break lol. From what I know, Rotaries are great engines, but very unreliable at times
@@Apollo5752353 super unreliable i know lol. i was gonna pull the trigger and get a kit and if the motor goes, swap in a three rotor. (little backstory, this is just my project car. i’ve got the time and money to waste on it 😅)
“Son what are you doing to our family minivan?”
“I’m just compression testing to see if it’s safe to turbo!”
- "I'm just doing a compression test to see if I can LS swap our toyota". . . .
Why you need compression test for swap a engine
@@jg5001 *facepalm
@@automech4315 rwoosh 🤦♂️
@@jg5001 even if it's a joke you don't make any sense
next week: unboxing a turbo kit
week after: laying turbo kit on the ground
week after: turboing miata (in need for speed)
Lolll
Underrated comment
🔥🤷
naah
Honestly wouldn't be surprised 😂
“Is my car safe to turbo?”
My 99 Mazda protégé : drops oil pans and cracks headlights
You need the Mazdaspeed badge.
Dude I turbocharged my 02 protege and it's definitely at a big risk of exploding
My 2000 Hyundai Elantra: shakes violently
@@tati-anaroseee4316 my 2002 prado *cricket noises*
@@carterkokot8511 don't take it to the redline lol
The garage is cool, but I miss the driveway. It had a certain moneypit feeling
I’d be overjoyed with the driveway and the weather they get.
I usually just make bad videos at the side of the road in the rain.
The garage is clean. I’m sure Zach would prefer the inside of his engine to remain clean, as well.
Classic
They might just be using the garage for the bigger projects
I do agree
Zach: listen for anything that stands out.
(air compressor kicks on)
Zach: not you.
@F Ù С Ķ • М Е ! • I WĄNT ŞĘX • OPÉN MY CANÁL ! shut up bot
@@CyrusFisher619 king
@@viktorvaughn8192 THE TRUE HIGH KING
@@jordanrobshaw1406 I see you are a man of culture indeed 🧐
Dear Donut, I would like to mf congratulate y'all this video blew me away!!!! Many of these dynamics can get fairly complicated, and can also applied to aerospace engineering. The way Zach explained things briefly but informatively gave people the right idea of what they were getting into, how much they understood watching their first time through, and just how ready they were to tackle this. Truly a great video, keep up the good work! I've seen this channel EXPLODE from just around 300k to now 4.45 million its insane and it hope it continues! The amount of effort just put into the sponsorship ad is insane, they are actually entertaining I don't even skip them anymore.
All in all, this was a great video and I hope you guys continue on the path laid in front of you, things are looking great for us, your subscribes, and you guys! The more people that get to watch, the bigger the products and production can become for us and it's been such an enjoyable journey thus far.
Sincercerely,
Yellowfling
Jobe: Does a 10 step checklist for turbo compatibility
Jobe and donut on HighLow: LETS SLAP ON TWIN TURBOS BOIII
This show makes Wednesday the best day
same lol
dammit, i wanna like but its at 69
Honestly
Yeah....
am I the only one how misis the in the garage-style vids
Hallelujah brother
“Is my car safe to turbo?”
My Honda Accord that is unable to die:
“HELL YEAH”
My 5sfe Japanese camry with over 423k miles and some bad gaskets that have never been replaced: uhjh
Ayy 7th gen with the v6 here
I'm thinking about turboing one too lmao. "That 3.0 V6 has MORE, I can feel it brah"
For a project car, I've been wanting to twin turbo a 3.5L V6 Accord, any advice?
@@yanikdavid3708 one advice: just do it. You'll be our hamster for the turbo path
"James is about to blow all his money!"
James; "What now?!"
Bruh, i laughed too much hahaha
James kept the guy's id 😂
ruclips.net/video/msL3WIDpukM/видео.html
Last ad said he is going to save Jeremiah from being fired and he did so probably the next ad will actualy be about james of blowing his money and thats realy cool
I never been so early where I can see the guy asking James to do an up to speed about his dad
Me who doesn't even own a car: " Interesting "
Oh sup Wrench, didn't know you into cars lol
Same
my parents corolla: "sweating nervously"
do you own a car yet?
@@jac1793 Nope.. No need for one so far..
Zach: "Listen for anything that stands out"
Air compresser at 12:01 : *REEEEEEEEE*
That was great
Air compressor go brrrr
Literally
I got spooked
@@nasilemak868 BRRRRR
💯❤️
The fact he’s wearing a Snap On hat but uses a Pittsburgh compression test kit makes me respect him even more. This guy knows what he’s doing.
Zach: "Listen for anything that stands out"
Air compresser at 12:01 : REEEEEEEEE
Its 250 for snap on compression tester. No one in their right mind would buy that for how little donut will actually be using it
You're exactly right. That's why I said he knows what he's doing, this isn't his first time breaking a bolt loose.
@Mobile Terminaluser snap ons expensive yes but the statement you said instantly made me laugh because of how obvious it is you’ve never held a snap on tool
@Mobile Terminaluser some tools go cheap but some tools you gotta spend money or your going to repeatedly break the cheapies
11:25 should've used a stethoscope or even just touching a wrench to the block/head and your ear so there's a direct connection for the sound to travel (amplify) to your ear. that's a good way to find leaks in pipes without having to drain and disassemble.
YES I WAS CHECKING LIKE EVERY 5 MINUTES IF THIS WAS UPLOADED YET THANKS DONUT
I woke up today saying well let's get through today but then I remembered its money pit day
I LOVE James and Nolan, but Zach has got to be my favorite donut guy! Such a fun, quirky personality while also being like a super knowledgeable older brother! ❤️ Much love to all you donut bros
Every car is boost ready, as long as you're ready to replace everything as it grenades
Or if you run low enough boost. Running conservative 5 PSI on my daily VW Bug. Even with that little boost it's still very helpful to make it less slow.
@@quillmaurer6563 what compression ratio do you run? Stock or lowered?
@@VanHalen2TheTop Stock, as far as I know (I didn't build this motor). Stock compression on those is pretty low, something like 7.5:1 or less.
@@quillmaurer6563 jeeze 7.5:1 with a turbo. thats really low
@@quillmaurer6563 the only problem with low boost is that it will need to become much higher boost to satisfy growing power hunger 🤣
2060: twin electric turboing my Toyota soil plant
Is that a dodge viper acr pfp?
@@devinkolka8002 Yes, his profile picture is a dodge viper ACR
@@Tommy018 pretty underrated car tbh
there gonna start calling car parts ingredients
@@devinkolka8002 the Viper is an iconic drivers car. No traction control and only a manual transmission. Definitely one of my dream cars!
“I gotta go, James is about to blow all his money” 😂😂😂
I love how these ads are starting to become their own little series👌
"It's turbo time!" - Arnold Schwarzenegger
“It’s turbo time!” - Governor of California
“It’s turbo time!” - A Man I Wish was a President
“It’s turbo time!” -Frenemy of Sly
Get to the turbo
"It's turbo time!" -the Terminator guy
“Strait from the ‘harbor-est’ of freights”. That got me. 😂
I only trust Freights that Harbor!
The hat makes it even more ironic
“That means your head gasket is leaking”
*laughs in cracked cylinder wall*
I'm so glad Zach jointed the Donut team and they have an actual greasy finger guy now. Really really expands the reach of your production!
Thank you for showing the World how to do a leak down test and what it is; that’s some seriously crucial information any car owner should have access to.
Good thing to do before pulling a motor in the junk yard or buying a car!
You are so much better at this than all of those Saturday morning car and truck shows. Informative, funny, and you explain the information in a way anyone could understand. Good work.
"Is my engine safe to turbocharge?"
My subaru: "yes, but no"
Depending if u have a DOHC engine cause If u do ir going to spend hella money I have a SOHC bugeye rs and I want to but making a good build on stock engine is going to be a lot more expensive than making a STI swap
😂😂😂😂 plus if its already a turbo one I would say just get a bigger turbo and start that 600hp build by yesterday
Speaking personally, I have a 2008 Subaru Forester which is supposed to be the best model years and it is biggest Piece of junk I have ever owned. Calling it a turd is a insult to turds everywhere
@@yamilmelendez2667 If it's an already turbo'ed engine from the factory, say the 1st gen Legacy Turbo (EJ22T), or any of the WRX's (bug eye and blob eye in this case with the EJ205), then yes. The EJ255 and EJ257 are great engines off the show room floor and if maintained properly, but the 2.5 liter Subaru engines have the worst of the problems of Subaru engines. Ringland failures, melted pistons, spun rod bearings, melted valves, and the worst of the head gasket issues. If the 2.5 liter turbo engines are built with beefier forged internals, MLS head gaskets and head studs, then absolutely go for a bigger turbo and moe powah babey. Now, the naturally aspirated EJ25s (EJ25D, EJ251, namely) are the worst ones to NA-T build. The 2.2 (naturally aspirated and the turbo ones) and 2.0 liter engines are the best ones from the factory with much stronger internals and have the least issues, and you may even be able to successfully turbo an EJ22 motor (depending on which one it is, and if it is a frankenmotor) for less than the price of an STI swap. The EJ22 motors have the same forged crankshaft and rods as an EJ20 WRX motor, but have larger pistons due to the bigger bore. Same engine casting, just a bigger bore in the EJ22. EJ25 is the biggest bore and have a longer stroke, but that's what makes them blow head gaskets much more due to thin cylinder walls and not very much support with an open deck block.
@@alexerickson5420 thanks for all the info bro cause im planing on getting an EJ25 swap from and STI
I love how the exit line for Dr Jobe is actualy a teaser for the next ad
And the ad before this he had said “hold on, Jeremiah is about to be fired”
A friend of mine once told me
"BOOST NOW. QUESTIONS LATTER"
What is the latter option?
I’ve got an IS300 that I’m about to twin-turbo, thank you Zach!!!
How'd it go?
the cowboys are going to win a game before Zach actually turbos the Miata
🤔Doubt it.
@@JoE-kx7dw lmfao
We aren’t gonna get a turbo video for a while then huh
The lions
Nah lol
Man thank u for this series! I’m doing my turbo build now... engine is in the machine shop as I type this! So it’s fun to watch you do this as well ... it’s definitely helping to pass the time while my process is rolling!
“James is about to blow all of his money” I instantly got an ad starting with: “due to the economic crisis” XD
Oh yeah I know this one
@@viktorstoykov4945 is it the junkyard something something one?
@@rohansewdien8086 yeah
I got a state farm commercial
😂
So glad you guys didn’t try to cram this project into one video. This shows people how to actually prep and do it right! Props donut fam 🖤🤘🏻
Me waiting for the week three "How to Find a New Engine" vid 😂
"The Harbor-est of Freights"
Mmyes, mmyes, indubitably, I am also a connoisseur of the Freights it Harbors
*swirls wine glass*
Ah yes. I too, am very fond of the finest selection of Pittsburghian crafts.
@@chrishernandez2490 Pittsburgh?! See here, I will have you know I use EXCLUSIVELY Bauer tools, good sir 🧐 hrumph and gafaw to you
@@buried_in_oblivion Don't you talk to me like I am of the likes of some Snap-onian Scum. I bid you good day sir!
~cries in wood handled screw drivers~
Boostee bois!
*Rodney has left the chat*
Mighty Car Mods fan I see
The listening for leaks test is one of the best tips I've heard of yet!! That's gold! Absolute gold!
The Harborest of Freights 😂 it’s funny to me because I’ve stocked that compression test a millions times.
You and me both, they sell like crazy
"What turbo is right for me?!"
**Laughs in junkyard turbo riding mower**
You fr? If so upload it, id love to see it
yeah deadass that's some content homie
@@blooiefps9304 oh hell yeah im subbed
We did, It’s on Northwest Exploration. If you see a profile pic with this type of white outline trace style, then it’s an account associated with Northwest Exploration.
@@savagesock3598 Here is part one: ruclips.net/video/40Z8JCTifug/видео.html
Great video, Id like to add that it is top dead center compression. You noted that the valves should be closed, but for any body new to these tests, they should know that there are 2 top dead center positions. compression: where both intake and exhaust valves are closed, and overlap: where both intake and exhaust valves are slightly open. while putting a long tool in the spark plug hole is very helpful and a trick i use all the time, it doesnt give you tdcc, neither does lining up the timing marks. if the valve cover is off its pretty easy to tell either by having play in the rocker arms or visually watching the valves open and close or by the cam lobes facing away from the buckets. if the valve cover is on you can try to listen to the air being pushed out the spark plug hole on compression or do trial and error: if you have massive leak down on both intake and exhaust, you are likely on over lap, turn the motor 180 and test again. if you still have excessive leakage then you have a problem. If not, then great you found tdcc and have a good cylinder and valve seal.
“Is blowing up your Miata worth it?”
im like bitch who is ur mans
@@dom2479 x is gay
The engine in the Miata was originally designed to have a turbo bolted onto it.
When they left it off, they didn't change anything as they knew the tuning boys would want to put one back on.
@F Ù Ć Ķ • М È ! ! ! • I WĄNT ŞĘX • OPÉN MY CANÁL ! That is one heck of a username
"I got to go, James is about to blow all of his money" am I the only one that caught that??? earlier episode james did blow his money, love this running gag.
thank you for explaining the cylinder leak down test, ive always shied away from it because of all the extra steps in the instructions but your way is much easier
Yo, the new turbo money pit intro is low key 🔥🔥🔥
Have been totally hooked on to this show and I literally wait for every Wednesday ❤️
yep ! good stuff to do ! a couple years ago i was enjoying the boosted life and one day backing down the drive way noticed some blue puffs of smoke. Shut the car down got out the compression testor noticed cyl one was barely in the 100 psi range while the other 5 were normal in the 140 range.
Got it top dead center and then started pressurizing the cyl, open the throttle, no sound, check the exhaust no sound, pop the oil cap WHOOSH. Immediately told me all the pressure is going past the rings. So now since then i've been saving up for my parts for the rebuild.
We just learned about compression and leak test in our auto class what are the odds
what methods did they teach you for leak test? did they use 5 psi or a much higher psi?
wherr can one take auto classes 😭😭😭 is it like a community college thing orrrr
@@lsnqkcnqkpnkpsnqpjcbpq some high schools do it
@@garettjohnson2234 i wish mine did it 😔
I miss those super buff dudes in the ads, bring the buff boys back!
Hello I know this isn't the right video, but I just got a 93 Honda Prelude Si, a car I wanted when I saw your group talk about the history of it. When I saw that video and saw 4WS I was like " I need to find one" and I did. Now it needs some work and I have plans for it though I need to save up for the cost to fix it. I just wanted to say thank you for getting that car on my radar.
"Donut Media" the only yt channel where i dont skip the in video advert!
Finally ive been waiting for this
Edit: i commented based off of the title but the new intro for money pit is so awesome
@F Ù С Ķ • М Е ! • I WĄNT ŞĘX • OPÉN MY CANÁL ! No u weirdo
2:36 my exhaust always rips by my hot side and then blasts it out an outlet, only when I eat beans tho... 🤔
Oh my the day has finally come, the most awaited episode of money pit dropped upon us
You probably commented before watching, right? The install hasn’t begun yet. (But I Too am excited to see this thing Turbo’d )
I wonder if the air compressor turning on and interrupting him as he says “no leaks” is ominous lol.
Does make a hell of a difference. I had a mx5 mk1 1.6 with a td04 turbo kit on with a switchible custom map and was absolutely brilliant. 140bhp 1st setting and 210bhp 2nd setting. Was absolute hoot to drive accept in the british rain..
Money Pit is one of my favorite things on RUclips right now. I already know most of what is being taught here, but it’s being presented in a way that’s new and simple, and I feel like my understanding of it is better now.
Wow, The new Money pi- I mean Turbo Kit intro is epic!
0:32 A motor is an electrical device which uses magnetic fields and electricity to generate physical motion.
“All the way clockwise, all the way to the left”.....
Glad someone caught it
Yes!! Someone 😅😅
Goes left after 6 oclock
Depends which way the clock is facing
He was turning it clockwise from his side and meant all the way to our left
Zach: Turbo stuff for 6 weeks
My google history: How to sleep for 5 weeks??
Thats a funny comment xD
"How to sleep 8 hours in 1 hour"
This video is so satisfying. This is the kind of stuff no one knows about. Its enthralling to listen to, and cool to see. You guys are bulletproof.
Me: I wanna make funny turbo noises
Zach: But should you?
Me: ...well now I don't know
Is my car safe to turbo?: No
do i care?:No
Am i still going to turbo?: Yes
Your engine could explode
@@Shaftheman could my engine blow? Probably
Do I care?: No
@@bobbycigarillo more like do I care?: after a few weeks maybe 😂
I have 3 "MONEY-PIT" cars..
I purchased 2 of them back in the 90's..
I just picked up my 3rd. money-pit.
I want to put turbos or do turbo engine swaps on all of them..
This video is helpful..
That SnapOn hat was probably more expensive then the whole turbo kit lmaoo
Never seen a leak down test performed the second way, always cool when these shows teach you something new!
This is the best and most comprehensive video I’ve seen on a pre FI check up!
can this show like never end.
thank you
Moneypit Episode 265: Are Bumper stickers worth it?
Moneypit episode 420: are airfresheners worth it?
"is your engine safe to turbocharge?"
my pontiac fiero: don't even think about it. >:(
(and yes, they do make turbo kits for the 2.8 v6
@Meme Man lol XD
😂😂😂😂
POP POP POP POP-UP HEADLIGHTSSS
12:00 perfect timing, compressor well done
One thing I learned from this vid is that everyone has a different compression test.
Zach: hey let’s turbo the Miata
All of the memers: 👁👄👁
Thank u so much for finally putting a turbo on the miata. U guys should continue this series even when the miata is done.
4:18 Ah, good ol' pittsburgh tools. Always exceeding my very low expectations.
"is your car safe to turbo?"
My 97 4runner: FUCK YEAH WHATS NEXT
I would like to know why 90% of diesel cars nowadays have turbo, but a bunch of gasoline cars doesnt, its a thing i really dont know, and you guys explain everything so well! Keep the work G’s
gonna need a new series of just zach skating
💯🔥
🎀💔👺
I cannot wait to see how much horsepower this car will produce after this kit is installed
Gonna go from 103 to 153
I'm grateful for learning how to use these tools.. Very simple explanation
Day 268 of asking James to do an Up to speed on his Dad
Hello!
How many days have you done this for
It's day 268 wow
We are here for u on the journey, I’ve been likeing these comments the last 20 videos
@@bhlrandom6648 268
me looking at this list 3:20
me looking at my fc rx-7: wow I only have one of those
Jacob Griffin, the guy who would orgasm after getting a Black Friday deal off of Apex seals. . .
@@jg5001 well ya and two stroke oil
Best explanation of a leak down test I've heard. Nicely done.
Fun fact: The first man to fabricate and install the first turbocharger was actually born in Italy. His name was Christopher Columbus.
Nice fact.
@@alexcooke4601 r/whoosh
It was not Christopher Columbus it was Alfred Buchi who made the first turbocharger. As Mr Columbus was the person who explored the United States when they first explored the usa
It’s true.. Abraham Lincoln said you can believe anything you read on the internet
@@alexcooke4601 that’s the joke 4head
Early. Have been waiting for this video since the beginning. Loved the videos so far keep it up :)
For a leakdown test we use 80psi in aircraft piston engines. That's what I'd use in cars also. Except on planes we can hold the prop to keep it from moving off top dead center. With a car the clutch has to keep the engine from moving off TDC. So with 80psi it may start slipping one way or the the other.
It's finally happening!
You're gonna be disappointed man