I see you used angle iron or L channel as replacement tank crossmembers but on the front crossmember near the Rear Differential how did you get the tank straps thru the angle iron ( drill and notch ) or do they make tank straps that bolt on ? Looking back at your first pt video the straps you have do have bolt threads on both sides do you know what they came off of so i can get same ones ?
The original straps from the two door tahoe won't work because they only bolt on from one side I bought straps from a suburban those do bolt on on both sides
@@lifted_mario8071 What year suburban straps are they ? I already got a new tank and everything else off a 96 Tahoe 2 door but the straps are my last piece to installing and doing this conversion
Question bro, can you let me know what and how you connected the 4 pin harness to the 3 pin harness? What wires go to what? Where does the 4th wire go??
he'll yeaa brooo...can't too work on mu obs tahoe limited broo...motivation
🤘
Waiting for the drop 😃
It's coming bro 🤘
I see you used angle iron or L channel as replacement tank crossmembers but on the front crossmember near the Rear Differential how did you get the tank straps thru the angle iron ( drill and notch ) or do they make tank straps that bolt on ? Looking back at your first pt video the straps you have do have bolt threads on both sides do you know what they came off of so i can get same ones ?
The original straps from the two door tahoe won't work because they only bolt on from one side I bought straps from a suburban those do bolt on on both sides
@@lifted_mario8071 What year suburban straps are they ? I already got a new tank and everything else off a 96 Tahoe 2 door but the straps are my last piece to installing and doing this conversion
Spectra Premium ST11 Fuel Tank Strap a.co/d/fS7QQo8
Where do you get your fittings for your fuel lines
I bought them from orailys.
Sheesh 🔥
Question bro, can you let me know what and how you connected the 4 pin harness to the 3 pin harness? What wires go to what? Where does the 4th wire go??
I didn't use the 4 pin harness from the truck I went to the junkyard and found a 3 pin harness from a different vehicle.
Correct, how did you splice in the 3 pin connector you got from the junk yard to the 4 wires from the factory harness
Any luck with how you spliced from 4 pin to 3 pin
what did you end up doing with the oem tank you pulled out ? Is it something you may sell ?
It's put up in my shed just taking space if ur interested hit me up on ig same as my RUclips.
What's you plan for doing tubs on the rear if you bag it or go any lower?
It is going to get tubs and probably going 2 more inches lower
Cut such a big hole in your floor and are you guys smelling fumes all the way around inside your vehicle while you're driving
It's a project I hardly drive it but when I do move it I have the hole covered so no fumes inside.