I went with djm spindle because I looked and researched that djm spindles were the only ones that didn't widen the track width but yea looking into control arms.
There's a crossmember almost to the middle where u might have to trim and also there's a bolt that mounts the rear seats where it might rub the bolt stick out where the dryshaft tunnel is.
I had to come here for the comments where was the step notch at the time of video ? I almost fell over when it looked like you just flip kit the ride and cut the frame notch Looked pretty hard to see imo
If u get some djm upper control arms it might bring that wheel in so it tucks but my wheels are 22x9 and they tuck in but I have djm upper control arms and McDonald’s gaughys drop spindles because they don’t push the wheels out I’m not sure if djm spindles push the wheels out or not…I know the react spindles lower the front and don’t push the wheels out Mcgaughys push them out just barley
I've been looking around for different option to narrow the front end definitely going with react spindles control arms I haven't decided and I'm thinking of going coilovers from aldan american but will see but yea definitely going to rework the front.
Авто/Мото
This set up looks great I have a 92 S10 watching your videos makes me want to lower my S10 again mines is on a 2/3 drop
Mario, you are an artist in the customization game!
Dammittttt boieeeee niceee...been waiting for this vid....
Sound like your from Houston. I like it
Luv your vids bro keep making them 🛻
Appreciate it bro.
🔥🔥🔥
Roll pan nice
I knw I'm the only one with one see thru lol
Lokks clean how did you make the driveshaft clear the frame
It has a step notch.
@@lifted_mario8071 the driveshaft not the differential 😅
o lol had to cut 2 crossmembers.
Mamalona broder se está viendo pregunta cómo le quedó el chasis de abajo
Como?
@@lifted_mario8071 el chasis sque tengo una igual una athaoe pero en el chasis de abajo ase como un puente una curva osea si la bajo más rosa
o ok tengo Como unas 3 o 4 pulgadas del piso enbeses me Rosa pero si esta muy inclinada una entrada.
@@lifted_mario8071 q onda broder pregunta tendrá otro tipo de comunicación para mandarle mensajes
@@juanjosesanchez4619 en mi Instagram lifted_mario
Spindles make the wheels stick out, use lowered control arms next time.
I went with djm spindle because I looked and researched that djm spindles were the only ones that didn't widen the track width but yea looking into control arms.
@@lifted_mario8071 Unfortunately, in my experience all spindles widen the track.
After having mine settle the front is sitting on the bump stop, is yours not doing that?
No I actually took of the bump stops way before I did the drop.
Any more vidz on the mamalonaaaa???
Currently working on one bro.
@@lifted_mario8071 orale broo awesome 👌 can't wait lol
Where u get the Yukon obs sticker from
My brother made them for me.
I did a 4/5 drop on my obe limited and now driveshaft rubbing....any recommendations to fix issue?
There's a crossmember almost to the middle where u might have to trim and also there's a bolt that mounts the rear seats where it might rub the bolt stick out where the dryshaft tunnel is.
@@lifted_mario8071 thanks brother for the help
No problem bro
Did you have to relocate the gas tank?
Yes I did there's two videos I made where I showed how I relocated the gas tank.
@@lifted_mario8071 alright I'll look them up I appreciate the information
@Gavin McClure no problem bro
How does she ride after lowering it
She rides smooth it rubs a little on the inner fender but rides smooth.
Where are you going to get your tubs from?
Probably the same shop that did my step notch A&A fabshop
@lifted_ mario ok cool I'm in Kyle lol I have a 96 4 door tahoe too that is halfway bagged in rear
Where was th flip kit from
From crown suspension.
How does it ride?
It rides smooth, if I hit a dip on the road it rubs in the front a little but because it's not tubed in the front.
Bro were did you order that kit from???
I pieced the kit my self, djm spindles, and crown suspension flip kit and springs.
@@lifted_mario8071 oh ok Kool man thanks for the response 👍
No problem bro
Yours wasnt 4wd?
No it's 2wd
@@lifted_mario8071 thanks. Hopefully theres a kit thats this easy for 4wd
They should
No C-Notch?????
It has a step notch with shocks relocated.
I had to come here for the comments where was the step notch at the time of video ? I almost fell over when it looked like you just flip kit the ride and cut the frame notch Looked pretty hard to see imo
If u get some djm upper control arms it might bring that wheel in so it tucks but my wheels are 22x9 and they tuck in but I have djm upper control arms and McDonald’s gaughys drop spindles because they don’t push the wheels out I’m not sure if djm spindles push the wheels out or not…I know the react spindles lower the front and don’t push the wheels out Mcgaughys push them out just barley
I've been looking around for different option to narrow the front end definitely going with react spindles control arms I haven't decided and I'm thinking of going coilovers from aldan american but will see but yea definitely going to rework the front.