Boars head is the best as far being natural brush! When I paint anything in my house I go for the good product s. And now is nice to know we can do the same with our vehicle s. Thanx a lot Brian!!👍
One of my sets of brushes is worn out, I did have the problem you mentioned in the past with soft paint on a car I corrected, using the brushes that were cheap and hard , marring it ( micro marring) around some seams and badges I agitated, tough lesson . Soft detail factory brushes fixed that problem. These look like a good addition to the outside care and you can never have to many brushes! Thanks
brian thank u for everything u do for the detailing community!! with ur honest opinions on everything u try!! it makes it easy for us!! i needed new brushes so I just ordered
I just discovered and ordered the Work Stuff Hurricane Wheel Mitt and I think it's a super smart approach to cleaning the face of the wheels, check it out if you haven't yet. These brushes look pretty good as well!
Great tools. The magnet inside the microfiber is a good idea but for me, I just flip the mirrors and the water just fall by itself when I wash or rinse.
Great videos as always. Wanted to ask what sizes were the 2 sets shown in the beginning of your video? Thanks again for sharing your knowledge and time.
I Need Some Of Those Brushes, I Currently Have A Chemical guys Boars Hair Brush One for Wheels And One for Interior But They Are Good but Not Thick Enough!! Think I Need To Upgrade To The Work Stuff Brushes.
I bought some several months ago before they were easily available here in the US mainly because a RUclipsr had some and said you couldn't buy them here. I'm one of those guys that when you tell me I can't do something I must try to do it. So I have a friend in Europe who hooked me up. Luckily they turned out to be nice. A little stiff to use on clear coat (in my opinion), but in the engine bay and wheels they are just fine. And as I mentioned I have been using them for quite some time and they have held up with no issues. I recommend them too. 👍✌️🇺🇸
Bryan, gonna start a 2 step ON A BLACK &BRIGHT RED MINI COOPER,with gyeon can coat or tac moonlight for protection. Maybe some Xtreme solutions poly sealant, not sure yet. ANY WORDS OF WISDOM BEFORE I START. THANKS. JP IN SD.
It sounds like you said “boars head” at the 1:07 mark 😂 now I want a sandwich ..I just want to say thank you for the great content you do... I love watching your channel I’ve learned so much
Brian help. Weather is getting better so I plan to try a 1 step on my paint. Thing is... I have 2-3 small rock chips that might be developing rust. Can I proceed or do the chips need to be addressed?
Just don't do what I did, I went to sling water out of me black one and it flew out of my hand and broke in two. The handles are slick when wet. Other than that I love my set of them. Going to have to buy another black one though. Lol
Where do find room for all the stuff you buy? I have a separate garage for my detailing business and yet have no room left. Great video as usual but they are too expensive.
Love the tool video's!! i never get enough of tools and all the good stuff. Regarding the Magneto's if you use a blower or compressed air you can get rid of all the water you now use the magneto's for... nevermind haha, in my enthusiasm i write here before watching the whole video. But great video, i got some chemical guys brushes at the moment i got at the detailing course. when they fail i will consider these Workstuff ones.
How do you get all of those cars coated ...and pump out the videos at the pace you do? Amazing!
For the love of detailing good sir!!😀
I wondered that.
Brian makes videos quicker than I can watch them.
You’re brilliant Brian.
I love you 👍
Awesome brushes! Soooo durable. Standard one works with wheels chemicals for over a year and still looks like new.
Not cheap but wonderful!
Boars head is the best as far being natural brush! When I paint anything in my house I go for the good product s. And now is nice to know we can do the same with our vehicle s. Thanx a lot Brian!!👍
One of my sets of brushes is worn out, I did have the problem you mentioned in the past with soft paint on a car I corrected, using the brushes that were cheap and hard , marring it ( micro marring) around some seams and badges I agitated, tough lesson . Soft detail factory brushes fixed that problem. These look like a good addition to the outside care and you can never have to many brushes!
Thanks
brian thank u for everything u do for the detailing community!! with ur honest opinions on everything u try!! it makes it easy for us!! i needed new brushes so I just ordered
Genius idea with the magneto!
Holy (you know what!) where have those Magnetos been all my life! As always thank you again sir 👍🏼
great simple but effective video good friend. b well good friend
Looks like there really good brushes. Thanks Brian
Nice! I did need brushes. Nice looking GLI
Try their black rubber coated handle models too!
Thanks for the review. Just pick up a set. Love your channel. I always pick up the recommend products. Always honest bad or good
I have been looking to replace a few of my brushes that are worn out, so this video is perfect timing! Thanks for the review. 🐝
Oh yeah...i will look into them!👍
Best brushes I've tried to date are from the detail factory.
Sweet! I need new brushes as well!
70K congrats and very well deserved
Cheers! Just getting started!
70k!! Congratulations 🎉🍾
Cheers good friend!! Just getting started!
I need a new brush set ✊Thanks Brian 💎I have a few from Adams the one exterior brush and one interior 👍🏻
I just discovered and ordered the Work Stuff Hurricane Wheel Mitt and I think it's a super smart approach to cleaning the face of the wheels, check it out if you haven't yet. These brushes look pretty good as well!
Two for Tuesday! 🤙🏻 🤙🏻
Great video Bryan. JP IN SD
You da man Brian
Great idea on those Magnetic Microfibers!! :-)
Great tools. The magnet inside the microfiber is a good idea but for me, I just flip the mirrors and the water just fall by itself when I wash or rinse.
Thank you!
Good morning,
what is the size of your Albino that you use for the interior as well as for the bodywork?
Let me know if you get the link about stars and stripes
Where can I pickup some of those magneto
Polish brashes😀 more and more Polish accessories are available in the USA. I am proud of that!
Great videos as always. Wanted to ask what sizes were the 2 sets shown in the beginning of your video? Thanks again for sharing your knowledge and time.
I prefer the shortest ones.
I have been wondering about these brushes..thanks👍🏼
I Need Some Of Those Brushes, I Currently Have A Chemical guys Boars Hair Brush One for Wheels And One for Interior But They Are Good but Not Thick Enough!! Think I Need To Upgrade To The Work Stuff Brushes.
I bought some several months ago before they were easily available here in the US mainly because a RUclipsr had some and said you couldn't buy them here. I'm one of those guys that when you tell me I can't do something I must try to do it. So I have a friend in Europe who hooked me up. Luckily they turned out to be nice. A little stiff to use on clear coat (in my opinion), but in the engine bay and wheels they are just fine. And as I mentioned I have been using them for quite some time and they have held up with no issues. I recommend them too. 👍✌️🇺🇸
Nice
What are the two set sizes you are using? Thanks!
Which version to use on exterior paint to remove dried wax in crevices and avoid scratching the finish?
Have you experienced any black dye bleeding from the boars hair brushes on first uses when new?
Thanks!
What are the two sizes used in the video, the ones hung up on the wall?
How long does an average interior detail take you?
Always depend of the dirt inside...can take an average of an hour and half
I try not to let an interior go over an hour...hour and a half. We specialize mostly in paint correction and preservation.
@@apexdetail85 thanks for the reply. I wish I could get away from 4-6 hour mom vans!
Love the concept of magnetic towels but any suggestions for us out here with aluminum body panels and soaking up the annoying drips?
Phoneman 1223 air blower
Yup....leaf blower
what do u have that La's Totally Awesome diluted too ? :P
I use it in interiors that are for the most part in good shape. Keeps the overhead down at the shop.
Apex Detail nice but do you use it straight ? Or do u dilute ? For interior cleaning
Bryan, gonna start a 2 step ON A BLACK &BRIGHT RED MINI COOPER,with gyeon can coat or tac moonlight for protection. Maybe some Xtreme solutions poly sealant, not sure yet. ANY WORDS OF WISDOM BEFORE I START. THANKS. JP IN SD.
I would go with Can Coat. Easy on the clear...they can be quite thin.
@@apexdetail85 thanks, can coat it is,
Brian I need a good set of brushes to detail my cars what is softer the work stuff brushes or the ones from the detail factory?
That's not a bad price for 3 brushes....especially if they last longer.
WooHoo! 70K
Cheers! Just getting started!
Great video bud
How many magnetos in a package.?Bryan
What size are you using in this video? Site choices are confusing!
It sounds like you said “boars head” at the 1:07 mark 😂 now I want a sandwich ..I just want to say thank you for the great content you do... I love watching your channel I’ve learned so much
I thought the same thing, then clicked your timestamp. And Im fairly certain he said head.
Well it's a boar's hair brush so maybe he did mean to say boar's head 🤷🏽♂️
I did say that.....I was hungry for my Bold Aloha Turkey Sandwich!😂
Brian help. Weather is getting better so I plan to try a 1 step on my paint. Thing is... I have 2-3 small rock chips that might be developing rust.
Can I proceed or do the chips need to be addressed?
Clean out the valley of the rock chip first. The ceramic tip on touch up pens are great for that.
Apex Detail tyvm, I was wondering if a Chem decon of that area would help
Hi Brian, another good video.
May I ask, why do you have the green Jaguar flag the wrong way around on the wall?
Brian's son was messing with his OCD when he put it up 🤣
Just don't do what I did, I went to sling water out of me black one and it flew out of my hand and broke in two. The handles are slick when wet. Other than that I love my set of them. Going to have to buy another black one though. Lol
Can you do a video on adams cs3
The magneto mf is pretty cool. I made some myself last year because I already had the parts to make it.
Any idea about MINI COOPER CLEAR COAT? HARD, SOFT, OR TWEENER?
Soft and thin.
Thank you.😎👍
How do they feel with the long bristle?
Not bad...I always cut one shorter to firm up the bristles.
Where do find room for all the stuff you buy? I have a separate garage for my detailing business and yet have no room left. Great video as usual but they are too expensive.
I help out local detailers who are my friends.
What size brushes do you recommend?
I prefer the shortest ones...both thin..and the fatter ones.
Hi Brian. Is that sprayer connected to a garden hose at the start of the video? Can you share the link or the name?
That is the Griots Garage Air Foamer....connected to air compressor.
@@apexdetail85 Perfect. Thanks.
It would have been helpful to show each size in hand for scale. Are the mm measurements diameters or lengths?
I prefer the shortest brushes.
отлично
Great video as always but way too expensive !!
You will be surprised how good they are. And durable
Love the tool video's!! i never get enough of tools and all the good stuff. Regarding the Magneto's if you use a blower or compressed air you can get rid of all the water you now use the magneto's for... nevermind haha, in my enthusiasm i write here before watching the whole video. But great video, i got some chemical guys brushes at the moment i got at the detailing course. when they fail i will consider these Workstuff ones.
I’m really afraid these brushes could leave scratches on the paint.
❤️
I just use normal detail brushes for hard surfaces and delicate surfaces I use women’s make up brushes
That works as well.👍
Made in china? I dont buy stuff made there anymore
Yes Josh, I’ve been saying that for many years. Unfortunately most retail stores carry few products made in the USA.
Thanks for the honesty and response sir
Nice