Hello I just received my Chololate plus, I followed the steps with the CubeSuite, but I can't get the Mightier Amp to connect to the Chocolate Plus. The light is flashing and is not connected to anything else. It just wont show up, only HID Input is displayed.
Ciao, I received it as well and I can confirm the plus is not showing up while regular version does. It seems Mvave did something strange, honestly the plus seems to be incompatible with any standard protocol, I am not able to make it work correctly so far.
I am in the same situazioni I've choose the plus over the regular one for the additional features but I cannot associate it with Mightier Amp. If you find a solution please share.
Nice tutorial. I'm already using a 1 footswitch Sky Turner page pedal (about €12 in Chinese online stores) in the same way. The advantages are the cost, the size (you can carry it in a pocket), no app needed for the switch configuration. It has 4 modes you can select directly with a device button. My preferred configuration is very simple: single press = next effect, double press = previous effect. It's the cheapest solution I found and it works like a charm! 😊
Interesting alternative. Thanks for the remark. Would you mind checking if with your device you are able to control ultimate guitar tabs app. I couldn't with the chocolate but they say it is page turner compatible
@@TutoJamyes, it works perfectly, once the app is properly configured. I just had to go to Profile/Settings/Pedal interface, select "scroll tab down" and press my device switch once, then select "scroll tab up" and press my device switch twice. Doing that I was able to scroll up and down all tabs. I guess you can select your preferred functionality, of course (start/stop autoscroll, etc.).
Thanks for your test. Just a last question, are you using an Android or an iOs device? It would be fantastic if we were able to find out which are the MIDI commands sent by the page turner. I am interested in purchasing one
@@TutoJamI'm using an Android smartphone. But let me clarify that the Sky Turner is not a MIDI device, it's a HID (Human Interface Device). Specifically, it's seen as a gamepad having 4 buttons: RIGHT (mode 1, single press), LEFT (mode 1, double press), DOWN (mode 2, single press), UP (mode 2, double press). Modes 3 and 4 simulate right, left, down and up movements, like a mouse or a swipe touch.
Thanks, perfectly clear. I was asking as also the chocolate can simulate hid messages just like a gamepad or keyboard, but it seems ultimate guitar tab could not detect it. I will try again. Bye
Thank you for all your advice it’s seems I was using the wrong app I didn’t realise there was a MIGHTIER AMP App all sorted now ,Thank you All once again.
Hi, you are welcome my friend, I am happy if I could help you. Have fun with that great device. P.S. stay tuned, another couple of videos are coming for the Mighty Air.
Hi my friend, unfortunately I am not the author of this great app, I am only showing its use. If you want to support the author his name is Tuntori and you can donate on his GitHub page github.com/tuntorius/mightier_amp. If you want to support my channel you can become an affiliate but the easiest and completely inexpensive way is to share it with your friends and ask them to subscribe. I am very happy you found Mightier Amp so great, I had the same feeling and that is why I wanted to share it
Hello, thanks for the video. Can we use the MIDI pedal looper functions to configure them separately? For example, to control rec/ply/stp/clr with separate buttons?
Hi, well currently the MIDI functions you can use, as the mighty space is designed like that, are Record/play/overdub, stop, clear, undo/redo. You cannot separate more independently those functionalities or use different ones as the method leverages the options made available by the manufacturer
Hi. Are you using Mightier Amp? NOT Mighty Amp. Settings tab is the last label on the bottom of the screen. Watch tutorial carefully focusing on screen touches.
@MarkSmith-kl9fq my dear, as I said this tutorial is made for Mightier Amp, not for Mighty Amp, you cannot apply what you see here on that app. Please install Mightier Amp and you will be fine
Of course you can, you just need to apply what is described in the following tutorial to the option "delay tap tempo" ruclips.net/video/BLmrcQEJu6U/видео.htmlsi=vHOq1f7nAyiKETsw
Wowow ! Fantastic ! Thank You very much ! I just bought a m vave chocolate pedal ! I'm just learning thanks to your tutorials ! Great videos ! 😉✌️@@TutoJam
Very useful video! If you wanted to be able to switch presets like you are doing here, but also be able to toggle on/off more than two effects, is it possible to configure the Chocolate so that long pressing the A and D foot switches change NUX patches up and down and short pressing the A,B,C,D switches toggle on/off four individual effects instead of just the two you can toggle in the simpler configuration you are demonstrating here?
Yes, it is possible using advanced custom mode on the chocolate to have two different options (short press and long press) on each button but in that case you only have 1 bank. Check here ruclips.net/video/N2Af9QOqVkM/видео.htmlsi=83illmEEan0sulPE
@@TutoJam I saw another tutorial where someone used three Chocolate controllers to change presets and toggle effects on a Bosd Katana by configuring them as 13 keyboard keys and then in the Katana software assigning the 12 keys to the different functions. Do you think I could use two chocolates to use one for preset bank/patch selection and the other chocolate to toggle off/on specific effects and allow access to more than one bank of presets?
It should be possible but in the past I was not successful using 2 chocolate together through Bluetooth, they used to connect one to the other. I should try worth recent firmwares. Through USB it should be possible
Hi, yes you can with latest version of mightier amp application. Of course if you own a device with that functionality ( for example, looper only on mighty space)
@@TutoJam Wonderful, thanks again. I've been using the official Mighty Amp app, I don't believe this app has support for wireless footswitches. I've downloaded the Mighter App and browsed the footswitch related settings, very versatile indeed, you can assign everything to a footswitch. Have ordered the M-Vave footswitch, look forward to setting it up when it arrives.
Foot switch arrived today. Got it all set up, was very easy. Using the advanced mode so I can make use of long button presses. Love it, thanks again for the useful information.
Hi there and thanks a lot for this great tutorial - very informative! One thing that I thought about is if the tuner function in the app can be displayed on the M-Wave. Is it possible, or do you have to tune on the screen of your phone/tablet? Thanks for your help! Cheers!
Hi, this is a digital footswitch, and it is focused on MIDI commands. If your amp can be controlled through midi it should be possible but this cannot replace a standard channel switch pedal
Great help video, thanks. Do you know if there is any way to be able to do this with saved presets. The ones on the second tab. since I have memorized presets, clean, crunch... without removing the ones that come from the factory
If you mean scrolling through presets instead of through channels, the short answer is no. I can imagine it should be technically possible but it would require the implementation of such a feature within Mightier Amp. We could add it as a feature request in Tuntori's GitHub page and discuss it with him, he only knows how difficult it could be.
Grazie per il tutorial chiarissimo, ho seguito passo passo e con il Plug Pro funziona perfettamente. Esiste una configurazione simile che permetta di usare la funzione Toggle anche per più di due effetti (per es. un efx, un compr, una mod, un delay)? Grazie
Ciao, mi fa piacere che ti sia piaciuto. Ad oggi non mi risulta che si possa fare ma possiamo parlarne con Tuntori. È piuttosto ricettivo ai suggerimenti.
Dimenticavo. Puoi già ottenere quello che chiedevi salvando l'impostazione come un preset diverso nella scheda "presets" e se usi la versione 0.9.10 o seguenti di Mightier Amp puoi usare il pedale per cambiare anche preset, non solo i 7 canali. Vedi il tutorial Guitar 14, ci sono un sacco di chicche nuove
Anyone know whether the newer Chocolate Plus would be compatible with the app? Just asking because of issues I have read regarding the later firmware of the original Chocolate.
Not sure about it, chocolate is highly configurable but I do not know a spark so cannot confirm. Best option would be for you to ask in Facebook groups
Hi, I would expect Airstep pedals to work as well as they are highly configurable and can send standard midi commands. I did not tested them yet though
Hi great video but I think to be having an issue, I have the mighty 40BT amp and my app only shows 4 buttons, the 4th one says Bluetooth and settings at the same time, when I follow your steps and need to connect to the chocolate in the mighty app, it just cannot find the footctrl so i get stuck there, the phone can find it but not the app, and i tried both ways, having the Footctrl paird in the main Bluetooth screen and also unpaired as you recommend in your video, either way the mighty amp app cannot find the chocolate (Footctrl) device. Please if you can help?
Please try to unpair it from the phone but also try turning it on and off a couple of times while in the app. If still not working we can ask Tuntori for help
Mighty amp, the official Nux app is not working for that. Please install MUGHTIER AMP by TUNTORI from Google play store or Apple store. My video is based on it
Hi, im having problems with the mvave, its desconnect from the app in seconds and no reconect, dont know whats happening and how to fix it, sorry for my english
Hi, some people are reporting M-Vave disconnecting at regular intervals from Bluetooth if upgraded to last firmware. If that is the case there is no solution for now. Also consider Bluetooth signal of the chocolate is not very strong, it seems to work well only within 1-2 meters from phone
@@TutoJam i think i fix the problem, also find the way of use the exp pedal in the new firmware, and can fix the problem of max and min invert in the exp. Also find that the custom config in mvave is better, You can do cool things. I use the A button to on off the efx, B button to on off the mod, C button to on off the delay and D button to switch between channels. Sorry for My English
Hi, great job, as I could not replicate your matter I could not help you much. Would you mind sharing your findings in the group so other friends can take advantage? Custom config allows a lot of cool things but I wanted to keep it simple. There was in my list a more advanced video but will take some time.
Hi my friend. I have two of them and tried but no success. When turned on together they tend to connect to each other and the app in any case seems not able to distinguish them
Thanks for answer, the CubeSuite detect the chocolate normally all good, but not detect the Mighty like in your video min 5:35 , in Accesory Equipment List @@TutoJam
Unfortunately on iOS the new version of the Mighty Air App does not detect the Foot Controller in Foud Devices (only show Nux Mighty Air Midi). before disconnecting the foot controller, flashing. :( @@TutoJam
Thanks for the video, am I right in thinking that the mWave app can only be downloaded from their website and not the Google App Store? If so that’s very risk as its an app file.
You are correct. Infact in another video I also mention the need to allow external sources. At the best of my knowledge nobody reported matters with it but of course we are taking a risk... By the way, iOs version instead is within Apple store
Ciao, il giochino è reso possibile dall'applicazione Mightier Amp e quindi sututti i dispositivi compatibili (incluso il pro), le funzionalità non sono identiche ma molto simili. Ci sono state delle difficoltà dovute ad esempio al fatto che iblocchi effetto nel pro possono essere scambiati di ordine ma Tuntori aveva già corretto qualche tempo fa.
Hello I just received my Chololate plus, I followed the steps with the CubeSuite, but I can't get the Mightier Amp to connect to the Chocolate Plus. The light is flashing and is not connected to anything else. It just wont show up, only HID Input is displayed.
Ciao, I received it as well and I can confirm the plus is not showing up while regular version does. It seems Mvave did something strange, honestly the plus seems to be incompatible with any standard protocol, I am not able to make it work correctly so far.
Damn, I bought it for this one purpose, I wonder whether they might fix this in a furture firmware update? I am hoping firmware could fix it @TutoJam
@SnifterRoux So do I my friend, I was expecting an improvement not to lose functionalities
I am in the same situazioni I've choose the plus over the regular one for the additional features but I cannot associate it with Mightier Amp. If you find a solution please share.
@Axilot will definitely do. I hope Tuntori will be able to do the magic
Holy shit ! I have been searching how to control my Mighty Amp with a pedal for so long !! Thanks you so much for this tutorial !! 🙏👍
I am happy to know you liked it. I would suggest you to check the channel, there are some more recent videos which shows additional details. Have 😊
Nice tutorial. I'm already using a 1 footswitch Sky Turner page pedal (about €12 in Chinese online stores) in the same way. The advantages are the cost, the size (you can carry it in a pocket), no app needed for the switch configuration. It has 4 modes you can select directly with a device button.
My preferred configuration is very simple: single press = next effect, double press = previous effect. It's the cheapest solution I found and it works like a charm! 😊
Interesting alternative. Thanks for the remark. Would you mind checking if with your device you are able to control ultimate guitar tabs app. I couldn't with the chocolate but they say it is page turner compatible
@@TutoJamyes, it works perfectly, once the app is properly configured. I just had to go to Profile/Settings/Pedal interface, select "scroll tab down" and press my device switch once, then select "scroll tab up" and press my device switch twice.
Doing that I was able to scroll up and down all tabs.
I guess you can select your preferred functionality, of course (start/stop autoscroll, etc.).
Thanks for your test. Just a last question, are you using an Android or an iOs device? It would be fantastic if we were able to find out which are the MIDI commands sent by the page turner. I am interested in purchasing one
@@TutoJamI'm using an Android smartphone. But let me clarify that the Sky Turner is not a MIDI device, it's a HID (Human Interface Device). Specifically, it's seen as a gamepad having 4 buttons: RIGHT (mode 1, single press), LEFT (mode 1, double press), DOWN (mode 2, single press), UP (mode 2, double press). Modes 3 and 4 simulate right, left, down and up movements, like a mouse or a swipe touch.
Thanks, perfectly clear. I was asking as also the chocolate can simulate hid messages just like a gamepad or keyboard, but it seems ultimate guitar tab could not detect it. I will try again. Bye
Thank you for all your advice it’s seems I was using the wrong app I didn’t realise there was a MIGHTIER AMP
App all sorted now ,Thank you All once again.
Hi, you are welcome my friend, I am happy if I could help you. Have fun with that great device. P.S. stay tuned, another couple of videos are coming for the Mighty Air.
Wow great video ! Thank you ! ✌️
Thank-you for your kind feedback
Thank you very much.
this functionality of the app is INSANE! How can I support your development work?
Hi my friend, unfortunately I am not the author of this great app, I am only showing its use. If you want to support the author his name is Tuntori and you can donate on his GitHub page github.com/tuntorius/mightier_amp. If you want to support my channel you can become an affiliate but the easiest and completely inexpensive way is to share it with your friends and ask them to subscribe. I am very happy you found Mightier Amp so great, I had the same feeling and that is why I wanted to share it
Thank you very very much.
Hello, thanks for the video. Can we use the MIDI pedal looper functions to configure them separately? For example, to control rec/ply/stp/clr with separate buttons?
Hi, well currently the MIDI functions you can use, as the mighty space is designed like that, are Record/play/overdub, stop, clear, undo/redo. You cannot separate more independently those functionalities or use different ones as the method leverages the options made available by the manufacturer
This is great advice thank you but my screen doesn’t. have any settings option what am I doing wrong.
10:27 App version 3.6.1
Hi. Are you using Mightier Amp? NOT Mighty Amp. Settings tab is the last label on the bottom of the screen. Watch tutorial carefully focusing on screen touches.
@@TutoJam I am using the Mighty amp. I only have four options the last option in Setup not settings
@MarkSmith-kl9fq my dear, as I said this tutorial is made for Mightier Amp, not for Mighty Amp, you cannot apply what you see here on that app. Please install Mightier Amp and you will be fine
Hi again ! Do You think it is possible to control the Nux tap delay with the m vave chocolate ? Thank You very much for your great videos ! 🙌 !
Of course you can, you just need to apply what is described in the following tutorial to the option "delay tap tempo" ruclips.net/video/BLmrcQEJu6U/видео.htmlsi=vHOq1f7nAyiKETsw
Wowow ! Fantastic ! Thank You very much ! I just bought a m vave chocolate pedal ! I'm just learning thanks to your tutorials ! Great videos ! 😉✌️@@TutoJam
Many thanks for your kind feedback, happy to help!
@kingeagle5045
Did you buy the original or the chocolate plus?
Are you having and compatibility issues with the firmware?
@SnifterRoux in this video it was the basic one. Just received the plus but not tested yet
Thank you very much for the video, my friend!
Can I make this procedure using a
Mighty Lite BT?
If it is a mark II it works exactly the same
@@TutoJam thank you very much!
Very useful video! If you wanted to be able to switch presets like you are doing here, but also be able to toggle on/off more than two effects, is it possible to configure the Chocolate so that long pressing the A and D foot switches change NUX patches up and down and short pressing the A,B,C,D switches toggle on/off four individual effects instead of just the two you can toggle in the simpler configuration you are demonstrating here?
Yes, it is possible using advanced custom mode on the chocolate to have two different options (short press and long press) on each button but in that case you only have 1 bank. Check here ruclips.net/video/N2Af9QOqVkM/видео.htmlsi=83illmEEan0sulPE
@@TutoJam I saw another tutorial where someone used three Chocolate controllers to change presets and toggle effects on a Bosd Katana by configuring them as 13 keyboard keys and then in the Katana software assigning the 12 keys to the different functions. Do you think I could use two chocolates to use one for preset bank/patch selection and the other chocolate to toggle off/on specific effects and allow access to more than one bank of presets?
It should be possible but in the past I was not successful using 2 chocolate together through Bluetooth, they used to connect one to the other. I should try worth recent firmwares. Through USB it should be possible
Thank you so much for this detailed guide. Can you assign this footswitch to control the loop and drum functions?
Hi, yes you can with latest version of mightier amp application. Of course if you own a device with that functionality ( for example, looper only on mighty space)
@@TutoJam Wonderful, thanks again. I've been using the official Mighty Amp app, I don't believe this app has support for wireless footswitches. I've downloaded the Mighter App and browsed the footswitch related settings, very versatile indeed, you can assign everything to a footswitch. Have ordered the M-Vave footswitch, look forward to setting it up when it arrives.
Foot switch arrived today. Got it all set up, was very easy. Using the advanced mode so I can make use of long button presses. Love it, thanks again for the useful information.
@SentinelGames really happy to help. Thank you very much for your feedback
Hi there and thanks a lot for this great tutorial - very informative! One thing that I thought about is if the tuner function in the app can be displayed on the M-Wave. Is it possible, or do you have to tune on the screen of your phone/tablet? Thanks for your help! Cheers!
Hi dear, I am very glad you liked it. Too bad what you are suggesting will never be possible
can i set this m-vave with my m3 blackstar amp and use it as a simple footswitch??
Hi, this is a digital footswitch, and it is focused on MIDI commands. If your amp can be controlled through midi it should be possible but this cannot replace a standard channel switch pedal
Do you happen to know if you can use two m-vave chocolate at a time with the nux ?
It should be possible. I ordered a second chocolate as I was planning to provide an episode about this in a couple of weeks. 👍
@Tutorial Jam nice. Looking forward to seeing it work hopefully. Where do you get yours from if you don't mind me asking
One on eBay, the other from AliExpress. Cannot guarantee these to be the best options
Great help video, thanks.
Do you know if there is any way to be able to do this with saved presets. The ones on the second tab. since I have memorized presets, clean, crunch... without removing the ones that come from the factory
If you mean scrolling through presets instead of through channels, the short answer is no. I can imagine it should be technically possible but it would require the implementation of such a feature within Mightier Amp. We could add it as a feature request in Tuntori's GitHub page and discuss it with him, he only knows how difficult it could be.
Grazie per il tutorial chiarissimo, ho seguito passo passo e con il Plug Pro funziona perfettamente. Esiste una configurazione simile che permetta di usare la funzione Toggle anche per più di due effetti (per es. un efx, un compr, una mod, un delay)? Grazie
Ciao, mi fa piacere che ti sia piaciuto. Ad oggi non mi risulta che si possa fare ma possiamo parlarne con Tuntori. È piuttosto ricettivo ai suggerimenti.
@@TutoJam Fantastico! Davvero un ottimo lavoro
Dimenticavo. Puoi già ottenere quello che chiedevi salvando l'impostazione come un preset diverso nella scheda "presets" e se usi la versione 0.9.10 o seguenti di Mightier Amp puoi usare il pedale per cambiare anche preset, non solo i 7 canali. Vedi il tutorial Guitar 14, ci sono un sacco di chicche nuove
@@TutoJam Grande! Grazie!
Super!
Great video!
Many thanks, glad you liked it
Sir thank you for this video.
Video request can you do a video for NiUX MG300 and Mvave Chocolate at presets A option to make it work
Dear friend, I do not own an MG300 yet for testing. If I happen to borrow one in the near future I would do it for 😃
Anyone know whether the newer Chocolate Plus would be compatible with the app?
Just asking because of issues I have read regarding the later firmware of the original Chocolate.
Just received it. Will test it soon
Great video sir! Do you know if I can use this on a tc helicon via trs cable?
I am sorry, cannot help you here, I do not own any for testing. Thank-you for appreciating the video.
Great tutorial, thank you very much 👍🏻
Hi possible using the footswitch with Spark mini amp? I'm considering to buy this footswitch for my Spark mini. Cheers
Not sure about it, chocolate is highly configurable but I do not know a spark so cannot confirm. Best option would be for you to ask in Facebook groups
Thank you. There's another compatible pedal that you know?
Hi, I would expect Airstep pedals to work as well as they are highly configurable and can send standard midi commands. I did not tested them yet though
This Nux have looper?
Too bad no. Only mighty space has it
Hi great video but I think to be having an issue, I have the mighty 40BT amp and my app only shows 4 buttons, the 4th one says Bluetooth and settings at the same time, when I follow your steps and need to connect to the chocolate in the mighty app, it just cannot find the footctrl so i get stuck there, the phone can find it but not the app, and i tried both ways, having the Footctrl paird in the main Bluetooth screen and also unpaired as you recommend in your video, either way the mighty amp app cannot find the chocolate (Footctrl) device. Please if you can help?
Please try to unpair it from the phone but also try turning it on and off a couple of times while in the app. If still not working we can ask Tuntori for help
@@TutoJam Hi thank you for your reply, I tried all that already, and the mighty app just cannot find it, if anybody can help, that will be awesome!!
Just to make sure, are you using mighty amp or mightier amp app?
@@TutoJam Hi! Mighty amp bt40
Mighty amp, the official Nux app is not working for that. Please install MUGHTIER AMP by TUNTORI from Google play store or Apple store. My video is based on it
Hi, im having problems with the mvave, its desconnect from the app in seconds and no reconect, dont know whats happening and how to fix it, sorry for my english
Hi, some people are reporting M-Vave disconnecting at regular intervals from Bluetooth if upgraded to last firmware. If that is the case there is no solution for now. Also consider Bluetooth signal of the chocolate is not very strong, it seems to work well only within 1-2 meters from phone
@@TutoJam i think i fix the problem, also find the way of use the exp pedal in the new firmware, and can fix the problem of max and min invert in the exp. Also find that the custom config in mvave is better, You can do cool things. I use the A button to on off the efx, B button to on off the mod, C button to on off the delay and D button to switch between channels. Sorry for My English
Hi, great job, as I could not replicate your matter I could not help you much. Would you mind sharing your findings in the group so other friends can take advantage? Custom config allows a lot of cool things but I wanted to keep it simple. There was in my list a more advanced video but will take some time.
Hello,… is it possible to use two devices (M-Vave Chocolate) at the same time with the nux? Then you would have more buttons. Greetings
Hi my friend. I have two of them and tried but no success. When turned on together they tend to connect to each other and the app in any case seems not able to distinguish them
😢ok. Thanks. Best greetings
Hello, it seems that it does not work on iOS (I have Iphone 11 Pro Max), CubeSuite does not detect the Mighty in the main menu... some help?
Hi my friend. Sorry but I believe there is something not clear. Cubesuite has to detect the chocolate, not the mighty.
Thanks for answer, the CubeSuite detect the chocolate normally all good, but not detect the Mighty like in your video min 5:35 , in Accesory Equipment List @@TutoJam
@ov-studios not a problem, mentioned for completeness but you do not need cubesuite to detect mighty, at all
Unfortunately on iOS the new version of the Mighty Air App does not detect the Foot Controller in Foud Devices (only show Nux Mighty Air Midi). before disconnecting the foot controller, flashing. :( @@TutoJam
Thanks for the video, am I right in thinking that the mWave app can only be downloaded from their website and not the Google App Store? If so that’s very risk as its an app file.
You are correct. Infact in another video I also mention the need to allow external sources. At the best of my knowledge nobody reported matters with it but of course we are taking a risk... By the way, iOs version instead is within Apple store
Thank you very much
My pleasure,👍👍😁. Stay tuned for the continuation going live tonight
Have you tested this to the NUX Mighty 20/40 BT?
Hi, not personally but it has been tested by another friend on the 40bt and it works well
@@TutoJam I'm planning to buy the NUX mighty 20/40BT & I have a Cuvave chocolate. . thanx alot.
Ciao. Quindi funziona anche con il mighty plug pro?
Ciao, il giochino è reso possibile dall'applicazione Mightier Amp e quindi sututti i dispositivi compatibili (incluso il pro), le funzionalità non sono identiche ma molto simili. Ci sono state delle difficoltà dovute ad esempio al fatto che iblocchi effetto nel pro possono essere scambiati di ordine ma Tuntori aveva già corretto qualche tempo fa.
@@TutoJam cos'è tuntori? Quindi funziona con il plug pro. Grazie
Tuntori è lo sviluppatore dell'app, è scritto in tutte le descrizioni e lo dico in tutti i video in cui la uso ...