Next time it might be easier to create a "sacrificial" piece of the mold for the hole. Just hot glue it to the inside of mold and remove after you've pulled out the whole piece. Kills two birds with one stone, the hole and making sure all the gummy bears are sealed in with resin.
Did you coat the inside of the whole with resin. You can probably use up resin so you can work on different sides of the cut out but I imagine the exposed gummies in the hole could rot
Pretty cool man! Might I suggest, coating the gummybears butt cavity with epoxy to encapsulate the raw gummybear flesh after drilling... Could get ants if you don't!
A router would probably be a better way to make that hole in the gummy bear light but you would have to set up a jig and a vacuum to extract all the chips. As far as cleaning forsters just take a torch and burn that thing off
![Seungmin "그렇게, 천천히, 우리(As we are)" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/kAzmhLHePqU/mqdefault.jpg)
Let me know in the comments what other movie/show references you like to see me make!
God of gummy bears
Bow before greatness 🙇♂️
Next time it might be easier to create a "sacrificial" piece of the mold for the hole. Just hot glue it to the inside of mold and remove after you've pulled out the whole piece. Kills two birds with one stone, the hole and making sure all the gummy bears are sealed in with resin.
I love that idea! Thank you!
Did you coat the inside of the whole with resin. You can probably use up resin so you can work on different sides of the cut out but I imagine the exposed gummies in the hole could rot
That's a very good point! I think it would be a good idea to seal in the gummy bears with epoxy!
@@FLALabs Cool hope it goes well
Pretty cool man! Might I suggest, coating the gummybears butt cavity with epoxy to encapsulate the raw gummybear flesh after drilling... Could get ants if you don't!
That's a great idea! If ants start coming around, I will definitely give that a try!
A router would probably be a better way to make that hole in the gummy bear light but you would have to set up a jig and a vacuum to extract all the chips. As far as cleaning forsters just take a torch and burn that thing off
Thanks for the advice!