Did you forget to mention disconnecting the front shock absorbers? Left front wheel not driving on my Luba 2 10000 H. Before trying a factory reset (which worked for someone as found online, but then you lose all your task areas), I thought I'd swap motors left to right and right to left first as a troubleshooting method. I have all the screws out on the bottom but the white cover will not separate from the black bottom part more than 1/16" in any given spot, and springs right back together when I let go. I don't want to break anything or damage any seals. Any ideas on what I should do?
@@Cotronixco yes, you are right about the front bumper. Sounds like you still have a screw holding it. However as I haven’t opened a Luba 2 I’m not sure
@@Cotronixco The front shock absorbers just goes apart when lifting the top off. To remount, the lower and upper parts of the absorbers must be aligned. No screws or tools needed.
@@martinbarfoed5040 I'm referring to the shock absorbers in your video They must be different on the Luba 1 than on my Luba 2's. It ended up that my cover was just glued together by the debris. I just had to give it a couple of taps and then it came apart just fine.
I just pulled it off. Straight up. Maybe you can pull a bit all around the perimeter first to get it loose. There ar no hooks or taps or other things holding it - so it can only be dirt etc. holding it from being pulled off.
Did you forget to mention disconnecting the front shock absorbers?
Left front wheel not driving on my Luba 2 10000 H. Before trying a factory reset (which worked for someone as found online, but then you lose all your task areas), I thought I'd swap motors left to right and right to left first as a troubleshooting method. I have all the screws out on the bottom but the white cover will not separate from the black bottom part more than 1/16" in any given spot, and springs right back together when I let go. I don't want to break anything or damage any seals. Any ideas on what I should do?
@@Cotronixco yes, you are right about the front bumper.
Sounds like you still have a screw holding it. However as I haven’t opened a Luba 2 I’m not sure
@@martinbarfoed5040 I believe there are two screws under the blade guards.
@@Cotronixco The front shock absorbers just goes apart when lifting the top off. To remount, the lower and upper parts of the absorbers must be aligned. No screws or tools needed.
@@martinbarfoed5040 I'm referring to the shock absorbers in your video They must be different on the Luba 1 than on my Luba 2's.
It ended up that my cover was just glued together by the debris. I just had to give it a couple of taps and then it came apart just fine.
how you open it. I have all screws out but i can't figure out how to pull top off
I just pulled it off. Straight up. Maybe you can pull a bit all around the perimeter first to get it loose. There ar no hooks or taps or other things holding it - so it can only be dirt etc. holding it from being pulled off.