Been auto crossing my GD3 for 6 years. I’ve thought about these springs for a long time but never pulled the trigger. If your looking for much more I’ve done a lot of work on balancing my pivot point in my car. Stock springs, progress rear bar (the thickest one), front camber bolts(adjust to taste), and front stainless brake lines and Autocross pads with 205 width tires on some 16s will give you a perfect balance point that can be controlled with the brake through the turn easily. I have thought for a while it would be even better lowered but it’s been beating 100 horsepower more cars with better setups in Autocross for years on just what I mentioned here. Good luck and have fun with that bad boy
Progress bar, camber bolts, and a good wheel setup are in my future for sure, I’d love to have a super functional build that also looks hella clean. I love to drive this thing and lowering it too much would just ruin that drivability
I have an 08 fit, could you maybe hmu with a list of stuff you’ve done to yours? What size lowering springs and what type of exhaust mods do you have? I got the cold air intake you posted a couple vids ago
I have a 09 fit sport had it for 7yrs got it for my girl then we had kids bought her a new CRV and since ive used the fit. Didnt like it was gonna sell it has 107k now but after watching your videos and others with their mods and kits I love it now lol what springs do you recommend for 2nd generation? I only paid 6,700 in 2015 had 54k now I see i could get 8k easy now
Yooo that looks so good !! That ride height is exactly what I want for my Fit. What lowering springs did you get ? And are you gonna get any wheels for the car?
imagine in my island they lower cars less then a inch and our roads are so bad they require jeeps/pickups to get around efficiently #thirdworldstruggles
Ah yes, fuck that nut on the strut lol
SERIOUSLY BRO
instablaster...
That before and after transition was so clean
Took me a solid 30 seconds so thanks 😫😫
Damn that’s dope. Really like it. I have a 2010 Honda Fit with 71,100 miles on it. Love my car 🚙
Been auto crossing my GD3 for 6 years. I’ve thought about these springs for a long time but never pulled the trigger. If your looking for much more I’ve done a lot of work on balancing my pivot point in my car. Stock springs, progress rear bar (the thickest one), front camber bolts(adjust to taste), and front stainless brake lines and Autocross pads with 205 width tires on some 16s will give you a perfect balance point that can be controlled with the brake through the turn easily. I have thought for a while it would be even better lowered but it’s been beating 100 horsepower more cars with better setups in Autocross for years on just what I mentioned here. Good luck and have fun with that bad boy
Progress bar, camber bolts, and a good wheel setup are in my future for sure, I’d love to have a super functional build that also looks hella clean. I love to drive this thing and lowering it too much would just ruin that drivability
I'm form Brasil and a have a Honda fit 2008, your chanel is so good.
Loooooking great!!! Loving the new look bro
Looks great man. Happy for you
I’m currently saving up for a Fit! Keep up the vids! No one is on RUclips building a Fit like you!
Not true..check out my GD3
@@213SAPPER This was 11 months ago. I have a Fit now though same color as yours.
Bro has spite
I had that same reaction, except I bagged my Gd. Nice video, tour car looks a lot better now.
It looks awesome, i’m your new follower ✌🏽😎
It's fire bro. Clean.
I have an 08 fit, could you maybe hmu with a list of stuff you’ve done to yours? What size lowering springs and what type of exhaust mods do you have? I got the cold air intake you posted a couple vids ago
whats the front bumper and back called, did you change it? it looks a little bitt longer than the other honda jazz fit
Nice bro! I might get one! If i like the car same color too in a few hours! Any pointers? What to see look for or whatever etc?
I’ve said it before and I’ll say it again she looks 🔥😍
I have a 09 fit sport had it for 7yrs got it for my girl then we had kids bought her a new CRV and since ive used the fit. Didnt like it was gonna sell it has 107k now but after watching your videos and others with their mods and kits I love it now lol what springs do you recommend for 2nd generation? I only paid 6,700 in 2015 had 54k now I see i could get 8k easy now
YESSSSS!
i saw ware you messed up all read you didnt trim the bump stops in the frount on the struts
What springs where they ? Tein s ?
thats childs play i have the same springs and 15x8 and stretch tires one finger between the tire and the fender
I picked up my gd3 with manual transmission for 1800$ couldn't be happier 😃
Now get some wider wheels/tires to fill it in!
May or may not have a spacer install video coming for the mean time 🤫 but here in the next couple months, definitely.
Looks good bro.
Yooo that looks so good !! That ride height is exactly what I want for my Fit. What lowering springs did you get ? And are you gonna get any wheels for the car?
Tein lowering springs, and yes! I plan to get wheels in the future
hello, can you give me old spare parts? I have a 2008. I need spare parts.
Baixou quantos centímetros?
Esta na suspensão fixa?
How could you do a car video in Utah and not fill up at Maverik?!
Get a front strut bar too
Song at the end ?
Not the DETAILED how-to video, we were hoping for... So many steps SKIPPED.
O WELL...
Rookie vlog mistakes happen to the best of us...
i would've put tutorial in the title had i thought I was qualified to make one
SOCHIRO HONDA WOULD WANT TO KEEP IT STOCK.
Sochiro Honda didn’t design this car
Duuude... Sweet...
i wouldn't have done that... BUT since you've dont it.. you've got to add some spaces man lol.. your wheels are hiding in the body of your car.
I’ve been staring at the box of them for a while waiting to put them on, so soon!
Nice VLOG...sweet ride...check out my GD3
niceeeeeeeeee ima do this on my fit HAHAHAHAH
How many inches did you drop?
about 2
Bro is the car's engine the 1.3 one?
1.5
How much did you drop it
2inches
Now don't hit any bumps pot holes
put some wheels on it
imagine in my island they lower cars less then a inch and our roads are so bad they require jeeps/pickups to get around efficiently #thirdworldstruggles
That is awful looking leave things alone and enjoy your Honda fit.
ok
Wow don’t aim the strut at people y’all could have died use a spring compressor
didn’t need it
My name is Justin too and ima shade tre mechanic as well thank you I wonder if this will work on my 19’ Honda Fit sport
Low but mines lower🤓
Bro, you need to change also you front end links. I will be too bouncy if you not going change it.
Hey bro