if your controller is not working: go to pcsx2 from desktop then settings - controllers- make sure play1 is setup dualshock 2 and controller mapping to steam deck virtual gamepad ( SDL-0)
I did do it and still it hasn’t worked it turned out that i have to change the game settings and force the sdl so i can use the controller And i got another stupid thing that my games audio stopped working all of a sudden to fix it i hade to launch the game and desktop mode and use the keyboard and press the windows button and go to the Audio section in the start menu and click on PCSX2 audio and unmute it
Ed, thank you so much. I had to factory reset my SD because EmuDeck left so much clutter that it was impossible to uninstall. I much prefer the standalone method for installing emulators. You’re the best!
Sometimes the standalone is worth it...... today it takes forever to let emudeck work...... there are some benefits for stand alone based on that...... plus when you have lots of games the update on there takes forever so it's much easier to go this route I feel and I have 1 micro sd card per console.... took a while to put it all together but i figured it out.... so this simplifies my life a lot
@@henryblazer20 well its not something I came up with like that...... I tried getting many consoles on there and because of how many games I had I emudeck stopped parsing due to the number of games i had on a 512 gb card..... so I decided to go around that issue...... 1 micro sd per card simplified that issue because now 1 card is fully deticated for that 1 console which means skies the limit..... plus I have many more games incase I get bored with the 1 that I originally have..... and I have a micro sd card case that holds all the cards and are labeled so I know which card is which so there is no guessing involved.....that 31 micro sd's just for the consoles and 12 handheld systems and that also doesnt factor in the latest games that you can get from steam directly factored in... on a good not that's quite a bit of entertainment realistically.... I try to maximize what I have especially when I travel..... since that's when I use it these the most....
I installed brand new EmuDeck yesterday and got 2 hotfixed update but still have problems with EmuDeck. I have no idea when they will eventually get better. I just prefer to have standalone for now since I only play 1 to 2 emulators at a time on deck.
@@mannyva01Bro do you even play the games? What do you with so many games at once? I have like 50 roms and still don’t know what to play. Always hard to decide lmao
I was literally thinking this, a lot of people complain that things go wrong when they update emudeck but surely if it's working fine as is why update it if there's a risk of something breaking when updating
You don't really need to add the ROMs individually to Steam. PCSX2 has a Big Picture Mode, so you can just add "-bigpicture" and "-fullscreen" to the Launch Options after adding the emulator to Steam.
Another great video which is easy to follow and help avoid those Emudeck problems. I'm also going down the 1 sd = 1 system route now although some will need a few more cards 😏 Keep up the amazing work. It's truly appreciated 👍
Thank youuu so so much for putting your time to make these videos!😁you have no idea how much time you’ve saved some of us, your videos have been so helpful! Forever grateful for your channel!!🥳
Ed i followed your videos faithfully and had emulation set up beautifully, unfortunately due to an accidental emudeck update i ruined everything not your fault at all just made me appreciate your videos and help in the past even more, sigh, if only i could change it back. Anyways, hope your doing good! Always appreciate your content
also, just adding the pcsx2 to desktop as a shortcut from steam essentially works as the standalone emulator, even though its still through emudeck. so those that already have emudeck, just do that if you want an easier way to access its settings.
You just made me buy a steamdeck instead of any other hand-help with this. I wanted to play retro games (mainly PSP \ PS1 \ PS2), but not all retro consoles are worth the pricing when you can literally get THIS beast. Thank you so much for detailed settings, it really helps noobies like me!!!
I tried many videos and it still doesn't launched. Edit: 4:59pm Eastern time. I finally did it. I took a nap earlier and came back to it. Woot Thank you. Now I can play God of War 1 on my steam deck along with other games. Woot! Thank you.
Thank you! Please Show Xenia Canary Next, I have struggled with that one since i got my deck, it worked for a brief moment with a EmuDeck update but broke with the latest updates, also I have YuZu installed via EmuDeck, a guide on how to backup it and install it as standalone would be awesome
Thank you so much for this guide. Really helped a lot and makes it so much convenient. Now that I got a hand of things and was able to do it more precisely. I can finally replay the .hack games in this thing. Thank you.
Great video thank you. I’m wondering if you could tell me how to add a rockstar launcher game to the gaming mode like you did for those roms? I have GTAV, RDR2, Max Payne 3 on rockstar and would love to be able to launch them from gaming mode (and have the artwork) without having to open the rockstar launcher first. Cheers!
Hey I it won’t work for me. I followed step by step and it’ll begin to start the game then revert back to Steam deck OS. I’ve changed proton to as early as 5.0 and still nothing. Any suggestions??
go to pcsx2 from desktop then settings - controllers- make sure play1 is setup to dualshock 2 and controller mapping to steam deck virtual gamepad ( SDL-0)
go to pcsx2 from desktop then settings - controllers- make sure play1 is setup dualshock 2 and controller mapping to steam deck virtual gamepad ( SDL-0)
@@ED4T if its possible can you do a tutorial on how to activate sheets on PCSX2 on the steam deck because sadly all the tutorials online are not clear on how to do it especially the RAW decoder app
I cannot seem to add my games to steam. I don’t even see that choice. But I was able to follow all your steps up until that point. How can I fix this? Thank you!
Can you make a video about MAME soon please? i have been so frustrated as the controls don't work all of a sudden.. will greatly appreciate it if you do.. thanks..
So... No performance boost? Yeah sorry I'm not going to go through all this just so I don't have to open emudeck and press update every couple weeks 🤣.
Hey ED4T. My problem is this on Stream under properties of PCSX2 is this Target: “usr/bin/flatpak” Start In: /usr/bin/ I have no idea what to do with these so I’m stuck. When I go back to game mode the hand doesn’t work. Pls help, I feel like I’m so close.
Please help me get online, i need getting -611 error trying to connect to any game online even though i have the same settings on my pc and i can play online there
I cannot find "removable devices." It's just not there. How do I find that? You said it was on the internal SSD so I presume it's not an external one I have to buy.
Hi there I followed the steps but anytime I launch it it seems to launch then quickly exit back to the steam dashboard This is for both in game mode and desktop mode. If the files are in the wrong order would I need to start over again?
I used EmuDeck to play Kingdom Hearts 2, It crashes at the opening sequence everytime. Sorry this isn't relating to the recent emulator for PS2, but have you heard of any way to fix this? I've looked everywhere.
@@ED4T I usually get mine from the same site and they work so I have no idea why this one didn’t work. The PS2 games for me on steam deck are either a hit or miss, they work or they don’t work. Only my Silent Hill 2 works. I have no clue what to do.
if your controller is not working:
go to pcsx2 from desktop then settings - controllers- make sure play1 is setup dualshock 2 and controller mapping to steam deck virtual gamepad ( SDL-0)
I did do it and still it hasn’t worked it turned out that i have to change the game settings and force the sdl so i can use the controller
And i got another stupid thing that my games audio stopped working all of a sudden to fix it i hade to launch the game and desktop mode and use the keyboard and press the windows button and go to the Audio section in the start menu and click on PCSX2 audio and unmute it
@@ranikutbican you go into more detail I’m having trouble myself
Still doesn’t work man, only in desktop mode the controls actually function
Last week I followed your ps3 guide, I was hoping for this, thank you! The collection grows even more thanks to you man!
Enjoy!
Ed, thank you so much. I had to factory reset my SD because EmuDeck left so much clutter that it was impossible to uninstall. I much prefer the standalone method for installing emulators. You’re the best!
This is why RetroDeck is used instead.
Great video! Ordering my first Steam Deck this month
Sometimes the standalone is worth it...... today it takes forever to let emudeck work...... there are some benefits for stand alone based on that...... plus when you have lots of games the update on there takes forever so it's much easier to go this route I feel and I have 1 micro sd card per console.... took a while to put it all together but i figured it out.... so this simplifies my life a lot
1 micro sd per console. I like that!
@@henryblazer20 well its not something I came up with like that...... I tried getting many consoles on there and because of how many games I had I emudeck stopped parsing due to the number of games i had on a 512 gb card..... so I decided to go around that issue...... 1 micro sd per card simplified that issue because now 1 card is fully deticated for that 1 console which means skies the limit..... plus I have many more games incase I get bored with the 1 that I originally have..... and I have a micro sd card case that holds all the cards and are labeled so I know which card is which so there is no guessing involved.....that 31 micro sd's just for the consoles and 12 handheld systems and that also doesnt factor in the latest games that you can get from steam directly factored in... on a good not that's quite a bit of entertainment realistically.... I try to maximize what I have especially when I travel..... since that's when I use it these the most....
I installed brand new EmuDeck yesterday and got 2 hotfixed update but still have problems with EmuDeck. I have no idea when they will eventually get better. I just prefer to have standalone for now since I only play 1 to 2 emulators at a time on deck.
@@ED4T me I play 5-6 different systems.... gamecube, xbox, ps2, psp, switch, and dreamcast
@@mannyva01Bro do you even play the games? What do you with so many games at once? I have like 50 roms and still don’t know what to play. Always hard to decide lmao
You are the best! awaiting for the Teknoparrot emulator guide ✌🏻✌🏻
Coming soon!
i havent updated emudeck since last year and it works great
I was literally thinking this, a lot of people complain that things go wrong when they update emudeck but surely if it's working fine as is why update it if there's a risk of something breaking when updating
@@seanwilliams5848 I'm here because of that...
You don't really need to add the ROMs individually to Steam. PCSX2 has a Big Picture Mode, so you can just add "-bigpicture" and "-fullscreen" to the Launch Options after adding the emulator to Steam.
great tips. thanks
Another great video which is easy to follow and help avoid those Emudeck problems. I'm also going down the 1 sd = 1 system route now although some will need a few more cards 😏 Keep up the amazing work. It's truly appreciated 👍
Thank you for this! I would love to see you set up all of the standalone emulators. This has made ps2 much more usable for me. Thanks!
Great find. I’m only using DuckStation and PCSX2 so standalone is likely better for me than EmuDeck anyway
Super informative video, very clear.
great video guide!!! thanks a lot.!!!! question how do you save a game .iso that has two discs?????
Thank youuu so so much for putting your time to make these videos!😁you have no idea how much time you’ve saved some of us, your videos have been so helpful! Forever grateful for your channel!!🥳
Ed i followed your videos faithfully and had emulation set up beautifully, unfortunately due to an accidental emudeck update i ruined everything not your fault at all just made me appreciate your videos and help in the past even more, sigh, if only i could change it back. Anyways, hope your doing good! Always appreciate your content
Thank you! Along with your PS3 guide, your videos are life saviors. I'd love you did the same for PS1 DuckStation.
Thank you so much legend for this!!!
also, just adding the pcsx2 to desktop as a shortcut from steam essentially works as the standalone emulator, even though its still through emudeck. so those that already have emudeck, just do that if you want an easier way to access its settings.
Will definitely try this one Ed
Hope you enjoy. thanks
When I get the time I'll probably start jumping on the standalone stuff! I'm not patient enough to move everything right now though! xD
yeah man its worth to switch to standalone when you have time. EmuDeck still have issues with new hot-fixes
Thank you for your work! This is was awesome :)
You just made me buy a steamdeck instead of any other hand-help with this. I wanted to play retro games (mainly PSP \ PS1 \ PS2), but not all retro consoles are worth the pricing when you can literally get THIS beast. Thank you so much for detailed settings, it really helps noobies like me!!!
Steam deck is the best overall device. You can play most of systems on it. Enjoy your gaming on deck !
I hope you got the OLED one.
adding games to steam without emu/steam rom manager is absolutely brutal with more than a couple of games...
It is literally the same exact thing. I thought he was gonna talk about Batocera.
I tried many videos and it still doesn't launched.
Edit: 4:59pm Eastern time. I finally did it. I took a nap earlier and came back to it. Woot Thank you. Now I can play God of War 1 on my steam deck along with other games. Woot! Thank you.
Only possible reason is you have wrong bios files
I think that steam rom manager would be great to include with these guides for adding and removing games to the emulator
What is the difference between this standalone emulator and the standalone emulator that emudeck installs?
great video boss!
Appreciate it!
Thank you! Please Show Xenia Canary Next, I have struggled with that one since i got my deck, it worked for a brief moment with a EmuDeck update but broke with the latest updates, also I have YuZu installed via EmuDeck, a guide on how to backup it and install it as standalone would be awesome
thank you for this! emudeck has been a mess with the latest updates and this is a better alternative
Enjoy !
Thank you so much for this guide. Really helped a lot and makes it so much convenient. Now that I got a hand of things and was able to do it more precisely.
I can finally replay the .hack games in this thing. Thank you.
You're very welcome!
Can you make a video on how to install Nexus mod step by step on your steam deck?
Merci ! Thank you from Paris !
Ive been using Emudeck deck and Ive never had any issues with any game.
Do ya use CSS loader my guy? It's a really nice decky plugin that can make your interface so much nicer :D
yeah it looks really cool. I used it for a while. thanks for share this
Great video thank you. I’m wondering if you could tell me how to add a rockstar launcher game to the gaming mode like you did for those roms?
I have GTAV, RDR2, Max Payne 3 on rockstar and would love to be able to launch them from gaming mode (and have the artwork) without having to open the rockstar launcher first.
Cheers!
Hey I it won’t work for me. I followed step by step and it’ll begin to start the game then revert back to Steam deck OS. I’ve changed proton to as early as 5.0 and still nothing. Any suggestions??
Can you play from desktop mode? If still not then you have incorrect bios files or bios files are in wrong folders.
The white cover looks dope ngl
thank you
It’s a shell and I wanna do it so bad but I have to wait for the Oled shells to drop 😭
Maybe do a button swap first lol.
www.etsy.com/ca/listing/1720659889/
Just got my steam deck and need to try this. Gonna get tekken 4 working if it kills me.
I followed your steps and my controls on my steam deck oled do not work when i start a game? Do you know a fix for this?
go to pcsx2 from desktop then settings - controllers- make sure play1 is setup to dualshock 2 and controller mapping to steam deck virtual gamepad ( SDL-0)
good tutorial, thank you.
Bruh amazing tutorial you rock so much ❤
No problem. Enjoy !
Please provide a walkthrough on Dolphin and Suyu using this method when you can!
great video, thank you :)
thanks for guide !
So the Steam Deck really is the ultimate emulation machine then ?
yeah man. unless you want ps3 and xbox360 then go with windows handheld pc 8840 or z1 exreme chip. they can play ps3 & xbox360 games .
nice video bro!
Sadly my controller is not working i can't seem to able to press any button in the loading screen for the games
go to pcsx2 from desktop then settings - controllers- make sure play1 is setup dualshock 2 and controller mapping to steam deck virtual gamepad ( SDL-0)
@@ED4T if its possible can you do a tutorial on how to activate sheets on PCSX2 on the steam deck because sadly all the tutorials online are not clear on how to do it especially the RAW decoder app
White steam deck looks sick
can you do a tutorial on how to add texture packs?
are you going to make an stand alone tutorial for vita3k?
I've never had a problem with emudeck..no idea why anyone would set it up manually when emudeck is basically 1 click setup
I set up with emudeck and when I try to use emulation station it can't find bios file or something but when I try to open it from steam app if works
I cannot seem to add my games to steam. I don’t even see that choice. But I was able to follow all your steps up until that point. How can I fix this? Thank you!
Thank you hero!!!
no problem enjoy !
Hi, any chance for DC emulator can be do this method? (Individual game add into library)
Fantastic tutorial! Although I have a big emulation library with different systems, this is very helpful!
Can you dowload the bios and the roms straight from the steam decks browser ??
Yes
@@MarluxiaX2 thanks fren !! I appreciate the response
Where'd you get the white case from? Didn't see it in the links but I am probably just blind
did you have to set up the hot keys with a keyboard connected to the dock?
can steam deck run ps2 games very well
do .iso roms work? i can't seem to get it to run when i follow the steps to add it to steam game mode.
Can you make a video about MAME soon please? i have been so frustrated as the controls don't work all of a sudden.. will greatly appreciate it if you do.. thanks..
So... No performance boost? Yeah sorry I'm not going to go through all this just so I don't have to open emudeck and press update every couple weeks 🤣.
I have almost 200 games in Emudeck already, and it's organized nicely there.
I'm 100% with you: No extra performance? No dice.
U cant tinker with the graphics live in emudeck like he does in standalone emulator. Thats why its better
@@monsterzero9456 sure you can. All Emudeck does is install the emulator for you. After that, you can just open it and configure it how you like.
@@monsterzero9456oh well.
@@monsterzero9456it’s an absolute pisstake to redo if you have already done everything before
Hey ED4T. My problem is this on Stream under properties of PCSX2 is this
Target: “usr/bin/flatpak”
Start In: /usr/bin/
I have no idea what to do with these so I’m stuck. When I go back to game mode the hand doesn’t work. Pls help, I feel like I’m so close.
My game is sitting in a black screen and wont do anything can u help?
Im still waiting mi steam deck from ebay😢, usps says "delayed for some unforeseen reason" 11 days 😭
hav u gotten yur steam deck?
@@K_ingS__ Yes, I was lucky
Thank you. This is better than emudeck. 11.2024.
Please help me get online, i need getting -611 error trying to connect to any game online even though i have the same settings on my pc and i can play online there
Where did you download the bios?
Okay but how does he have a white steam deck from 8 months ago?
Amazing tutorial
How do you launch in big picture mode with pcsx2?
i get so much input lag it is unplayable do you know any tips?
I’m not seeing mmcblkop1 when setting up the wizard?
Why is that??
any way to set up pressure sensitive buttons using a dualshock 3 on pcsx2? i've been having so much trouble with it.
Can you please show how to do the same for PSX Emulation?
Ed, how to save state? 😢
I cannot find "removable devices." It's just not there. How do I find that? You said it was on the internal SSD so I presume it's not an external one I have to buy.
The controller doesn't work for me either, I did it as you wrote. And how does the forcing work?
Hi there
I followed the steps but anytime I launch it it seems to launch then quickly exit back to the steam dashboard
This is for both in game mode and desktop mode. If the files are in the wrong order would I need to start over again?
most likely you have wrong bios files. or incorrect game rom format
My game plays in slow motion????? Please help
Make sure fps limiter is off and intental resolutions set 1x
Isn't there a way to remove or chose to bloat or not to bloat emudeck? Should be a feature...
Using the Steam Deck Desktop mode is a pain in the ass to control, how do you do it so well?
Just plug mouse+kb
Does anyone know where to go to get ps2 bios he only showed 3 folders but one of his other videos it showed the bios founder had 7 folders in it
where tf do i find compatible bios with the game i want to play
Has anybody gotten a ps5 controller to work with the PSX2 Emulator? It would be amazing and would allow to upscaling while docked on a 4K TV.
I use my DualSense wirelessly with PCSX2 on my main PC and it works flawlessly, so it should work great on Deck, too.
Thanks, now waiting your upload for Dolphin emulator guide! Emudeck ruined dolphin a few months ago :(
How to get the white steam deck
I’m brand new where do I get roms and bios files
Google is the best way
how i do it with ryujinx?
I’m confused…. Does emu deck still good or no please help
if you just want to play 1 or 2 emualtors on steam deck at one time then go with standalone emulator. less hassle to deal with
How do i add HD texture packs?
Still the games slow either in emuodeck or with stand alone emulator
Its kind of tedious adding every single game and having to change it each time. How can i sue the nightly build on emudeck pcsx2???
does this method works for suyu?
Emudeck sucks it keeps crashing. I have to keep uploading the roms over and over it takes forever.
It's pain to use sometime.
I used EmuDeck to play Kingdom Hearts 2, It crashes at the opening sequence everytime. Sorry this isn't relating to the recent emulator for PS2, but have you heard of any way to fix this? I've looked everywhere.
i have no issues with it. you should try a different rom.
@@ED4T I usually get mine from the same site and they work so I have no idea why this one didn’t work. The PS2 games for me on steam deck are either a hit or miss, they work or they don’t work. Only my Silent Hill 2 works. I have no clue what to do.
thank you now i can play god of war
enjoy !😊
Would this tutorial works on PCSX2 on lenovo legion go which it is using windows11
Faz um vídeo assim para Gamecube e PSP, por favor.❤