For anyone who wants to use PS4 controller, you have to use usb receiver for Bluetooth (make sure you buy a good one, I bought some cheap dongle and connection went on and off every 5 seconds). Now if the console doesn’t read the usb, then you have to use the original stick to set it up at bluetooth controller setting. Later it will be read as wireless controller and you’re ready to go
How do you restore the controls to default when the controls are screwed up. Somehow I can only use L2 & R1 to select in the main screen. This makes it hard to navigate and it won’t let me change the configuration. It just exits me out. Anyone know a way around this
I'm having an issue. I got a 8bitdo pro 2 and I maped the buttons just fine but when I go in to game I get a controller not configured error. Only thing I can do is bring up menu with y or quit out.. oh and for somereason when I unplugged it and plugged it back in it now reads it as a generic xbox controller
What should i do if my 2nd controller wont press start when i play dreamcast, mame or any emulator that has a multiplayer. Eventhough i already configure correctly my 2nd controller. But when i turn off my controllers. And try to turn on first the 2nd controller. The 2nd controller became the 1p in the game or the master controller. So now my 1st controller wont press start or wont work.
How do I set up and restart my controlling in retroarch?? My remotes are plug in and working but when I play games the controlling is all wrong and I can't click accept to go into the input change keyboard and all I need help!! Plz
What happens when controller 1 disconnects for some reason while switching save slots (hot key+ right d)?? I cant seem to reconnect controller unless i power down
Im having an issue when i start a game the controller stops working normaly and tries to do other things like lower the volume or reset, switches between slots to save in and so on. cant play any games.
Is there an n64 controller that works with the super console x king? If not can I find out how to play the n64 games on the console making use of all the buttons so I can play them as intended?
Anyone figured out how to make the console remember the Bluetooth controller and mapping for the next reboot??? Mine keeps forgetting my Bluetooth controllers...
The Xbox 360 controller you mention has a wire. Does the Super Console X work with a wireless Xbox 360 controller? Or does it have to be wired? Also would an Xbox One work with this? Cheers.
Hi I’m sorry I’m lost. I played my super x at least ten times and I now can’t get any of my controllers to work. I have the PlayStation type that came with it and SNES wireless as well as a cheap Xbox and a blue tooth Xbox. I can control the main screen but as soon as I get into a game nothing works.even games I played don’t work!I do the configuring on the controllers then I can’t even exit out of the game. What am I missing?
Is there a red light on the usb dongle that you put into the console to detect the controller? I cant seem to be able to find any controlkers at all, tried charging my phone on usb points too and not reading anything at all, do u think its faulty??
I mapped controllers same way you did... Was playing wrestlemania arcade ver. Can't bring up in game menu for input dip switches etc. Brought up Black small box menu before in game now I can't access the in game menu thing. Help plz?
Hey man! Every time I open a game in Mame the system forgets the input changes I made before. Is there any way to save the config changes inside mame? I'm having problems with the left joystick button, because by default that button opens the configuration menu. And it is impossible not to press that button while playing Fighting games. it's super annoying!
Im trying to use the pack in ps2 wireless controllers that come with the super console x to play an amiga 500 game. The problem I have is that it recognises the controler but some of the games keys were on the keyboard. Im using the amiberry emulator and It will not let me map keys
Could you show how to do a save state with a n64 usb controller. That is driving me nuts. Can’t seem to access retroarch menu when it’s plugged in. I’ve tried everything. Keeping the Xbox controller plugged in and keeping a keyboard plugged in. It’s irritating. The n64 controller works fine just can’t save or load.
Press both stick buttons to access the 65kw emulator menu. In the emulex menu you can select from 4 different emulators. I had the best luck so far with the one that starts with 'P'. In the N64 menu for the default emulator, before I found the others, I had to change the setting for the control stick function mode before they would work. Also, the hardware can't seem to handle resolutions over 640 very well.
@@PackageFromChina Haha, no worries, it's just funny that you have such a terrible game on there :) It was a terrible movie, too! I remember loving the first movie when I was a kid.
@@RetroGameCorps terrible might not be the word. as old and game savvy as i am, i die super fast on the very first level! the movie was meant for kids but definitely not the game.
I finally got my player 1 controller to work. Now how do I configure player 2 so it matches player 1? When I change it the same way, it doesn't seem to save.
Hey thanks Mate! I've a question, I hope you can help me :( I use the PS4 Dualshock (OG) with cable, BT is not working, yet. Everytime I do the button matching, I can not setup the thumb clicks, it will always be recognized as Axis Movement... I think they are too sensitive... Is it possible to change the sensitivity? It is making me crazy!!! Thank you again and have a great weekend!
Has anyone figured a solution to the controller not being able to open up the menu. Just received the unit today, hooked it up for the kids successfully mapped controller 1 then when trying to map the second controller the first controller stopped responding. And after reading some of these comments, this seems like a popular problem, just wish I saw that before buying 😕.
Have you tryed turning it on then off removing the controllers then turn it on again it will say no controllers detected then put the original controllers back in it will say press a to configure them but dont push anything then it should just say default xbox 360 controller in port 1 and port 2 they should work fine then
I am having a problem where everything works fine when playing with two controllers but then after I turn the second player controller off it will no longer let us play two player games with both controllers.Both controllers will work in the menu ect but will not work at all in two player games.I am using the controllers that came with the system.
I have just bought a Kinhank super console x and trying to configure the included controller. The console recognize the two Microsoft X-Box 360 pad after I hold A button to configure the controller, but I am unable to go to the next step to map the controller no matter what button I press. When I highline the controller and move the joystick to the right, a small windows pop up with INPUT P1 #0 Microsoft X-Box 360 Pad, if I move the joystick to the right again to choose it, it takes me back to the controller settings screen again. I just cannot go to the controller mapping page. The left joystick is the only thing work that allows me to move up and down to highline what I want, and move left or right to choose, nothing else is working. I cannot use the controller without controller configuration. Can you tell me how to go to the mapping page from Controller settings page?
@@sheepdog2884 Sure there is. Power the system off. Unplug your controller. Turn it back on, and it will say no controller detected. Plug your controller in. It will then go through the configuration again.
Great video. Appreciate the effort put into this. Does anyone have clear instructions how to connect original ps3 and p4 controllers? They works when connected through a USB cable. Tried connecting using the connect bluetooth controller function, but this seems to time out in few seconds on the console, meaning it only gives 4 sec window for it to find a controller. Any help is much appreciated as the controllers that came with it are not stable when using the left thumb stick. You press a little bit left ,the car (for example in mario kart on n64) swings too much to the left. Bedankt
Setting up my Mayflash arcade stick totally crashed the system on the first night, and I followed directions carefully. I now have to return it to Amazon. Be careful unless you’re decent at rebuilding the memory card
@@ramza813 yeah I really wanted to play golden axe return of death adder but it doesn't work. I mainly got for fist of the north star and shmups like dondonpachi Darius. But alot of roms are ass. Plus I tried to configure the buttons and it was a chore. They got screwed up! So I returned for another one.
@@METALFACEDOOMXXXX that stinks. this thing had potential. plug in and play. most good PS1 and SNES games you can get on your phone like SoTN and FFT. i bit the bullet and downloaded MAME and Golden Axe. its so awesome.
I got the cube and got the same controllers in the video and everything worked good. Then i bought some snes wireless controllers and configured them and it jacked the original controllers. Now when i go back to configure the original controllers the select button doesnt register that i am pressing it and after i configure one analog stick i cant configure the other, it says already taken. Is there a way i can wipe out all the controller settings?
My controller is connected but when I play n64 and choose Mario kart for instance it won't let me select a character. It reads all the other actions I choose but when I get to the player select screen it won't read the controller
Hi thanks for this helpful video, but is there a fix to help the delay of the controllers?. im using the ones that came with the system and there is a slight delay which makes things not so enjoyable. please any help?
i wanted to know also. i'm not a fan of wired but i'm curious if anyone tried ps or xbox etc that didn't come with console and see if lag was still an issue.
@robert-asdf The best setting for me is to set the TV to game mode, which mitigates the delay quite a bit, but there's still a delay that's noticeable.
I went onto the NAOMI games and there is a game called confidential mission it's a light gun game but the controller doesn't work with it I think you need a usb light gun to play the game do you know what light gun would work with the game
You said that ps4 controller doesn't work with your emuelec, but it 2 years past.Did something change or not, because I want to buy ps4 gamepad and don't know if it connects properly.
I bought 2 wired usb controllers and tried to configure both of them but had the same problem with both. I can configure every button correctly except the right trigger. Everytime I try it skips to the next button and says "no setting" next to right trigger. Really pissing me off. Any suggestions?
Hello I was trying to change controller's set up I've messed up everything then pressed ok,now I can't access Main Manu and can't set it up again.Any other way to do it?Please help
Easy thing is to do ... unplug all controllers. Boot up system ... Grab a new controller.. setup. When 1 has been config correctly .. you can config the other 2 again you made a mistake with.
Can someone please tell me why every time i try to play any game if i press the B button it resets :( also Y is menu ???? Anyone know how to change this!!! I’ve been waiting months for this to arrive and i literally can’t play any games
I have been trying to configure the fake PS controllers the rero x came with just to START a game for 2 hrs with no luck! This is insane, configure in the menu fine per instructions, tried different games on different systems and I literally can't even start any, it's like the Start button doesn't work. It's even mapped properly in the quick menu that you can bring up in-game. Are these controllers it comes with faulty?
In most games only the startbutton of controller 1 works and it seems to be some game of chance which controller the scx recognizes as the main controller, Plug in both of them and switch them on. When in the game the startbutton of one con doesn´t work, try the other one. Once you figured out which one is recognized as main controller, go into the main menu (emuelec), open controller settings - controller 1 and chose the con you prefer. After that it should stay the main con, at least until it gets unplugged.
My ps4 controller working amazing, BUT... some days later it working normally at the menu only but on the games is dead i remap it but nothing, why any idea?
Hello dear sir...so i made a mistake to try and change the contoller buttons...now the first controller is working as a prime one..meaning doing all the start,select fights...the second one is moving left,right etc but when i go in the game i can select to start a game...it doesnt work at all...what should i do?is there a way to make the second controller work properly as well?go back as it was?maybe reboot?if i am saying it right...
I just got my Pro today and my controllers do not connect up. They came with the box, Power and Mode button just flash on pressing the Start button and nothing happens on screen when I hold down the A button. Did get a plug in PS3 Controller working on it.
i love how everyone made multiples videos about the basic setting that are already shown in the console.. .. what we want is a video that shows how to fix a controler that been setup which dont work once in emulator. I did some change in the proper section for retroarch but since this console doesnt act the same as expected behavior from retroarch it keeps breaking everything. We need a video that shows the do's and don't in retroarch setting and optimisation since some could break the whole installation and doesnt produce the expected results...
Im all set up, and I select PLASTATION .............. and it does Nothing. It says 54 games, I hit select X & A but can NOT get into the plasystation games. It will just take me to the controller menu rather than into the game listing. Do we have to go into the controller menu everytime before we get to the games?? Just want to play shellshock but cant get past the Playstation logo. so frusterating.
I just got the game console and I don't know what I did but the start button does not work. Can someone please help me 😢. I can't reconfigure the controller now or even play alot of games.
Did you figure this out? I just got a retro x and the buttons work in the menu and I configure it but then I can't start any games. It's like the freaking Start button doesn't work! I've been messing with this for over an hour and cannot get it to work.
Hey Wicked, Super bedankt voor deze informatieve uitleg. Zojuist geprobeerd om mijn xbox 360 controller op de super console x pro aan te sluiten maar hij herkend de controller niet. Wat doe ik verkeerd?
Could you show me how to set up the controllers for the Genesis? I have tried for the life of me, but it's not working right. For example, when playing Sonic The Hedgehog, when I want to move right, he jumps. Or another example, when I play NHLPA '93, when I move right, the person with the puck passes. Any help would be appreciated.
That happens if your controller is in 6 button mode vs 3 button mode. I had the same problem on the original Genesis, but I don't know how to fix it on here.
De gamepad werkt goed in het spel, maar toch nog een probleempje. Er zijn allereerst eigenlijk 3 knoppen te weinig om alles in te stellen. Ik heb de select knop ingesteld om een game te verlaten(the hot-key), maar dat werkt helaas niet. Tot nu toe zet ik de super console X iedere keer volledig uit en daarna weer aan om naar een ander spel te gaan. Is dat misschien de enige mogelijkheid, of doe ik toch iets fout? Ik heb ook een Xbox 360 ingesteld en daarbij de zilveren knop gebruikt om de game te verlaten. Ook daarmee lukt het niet om een game te verlaten.
us, pal, ntcs, uploader, region, that type of thing. gigawing and gunbird for DC that came installed don't work but didn't care about the game enough to look for which site/upload works.
Great Video!! I was wondering if this system would be compatible with the "X-Arcade Tank Stick"? The X-Arcade Tank Stick is a 2 player arcade stick that uses only 1 USB to connect to a computer or gaming system. Are you familiar with it and do you know if it's possible to connect it? Thank you, I appreciate it :)
Power down and back didn't let you reconfigure? Power off, Unplug dongle, power on, and plug back in the dongle? Otherwise, there is a youtube video for reinstalling the system completely.
Do you have a solution?I have the same problem ,messed up the settings?bought the system ,arrived today en messed up completely,please let me know much appreciated 👍
Im using one controller but every-time I play one of those arcade games its mapping player 2 as well. I just want to play solo its annoying. Any way to fix this?
Have you tryed putting the controller in a differnt USB port on some games emulators they recognize each usb port on the console as over player 1 or player 2 on controllers configuration put the controllers as player 1 and player 2 to which controller you want to be recognized as player 1 or 2
How to set up xbox series x controller on super console x pro by magic ns ? switch pro controller is working but xbox series x controller not working !!
I have a problem. When i play 2 players game sometimes both controller disconnect and reconnect at the same time! And it switch from player 1 to player 2! Is it something that happen to you? Is it the cheap controllers or the usb splitters in problem?? Thanks!
Where have you bought these controllers, these look like ps4 controllers but with dongles with it. Could you, or anyone in this section please give me some info. I am looking forward to buy controllers for my ps4, but if they work with super console x that would be amazing
@@igb2904 damn. I figured that...I currently dont have a pc...well looks like I gotta wait for my friend till I can update it. Did it do anything strange on the startup for you?
Idk its acting strange all the games say missing assets( and missing sounds) and it wants me to use the online updater. Hopefully just needs the update.
@@ronniesmith6348 nope. On 3.9 it’s just told me about the update but it didn’t have enough space to install update even though I extended the partitions
I ordered mine from Amazon on February 10th and it arrived this week on March 4th. It still shipped from China, but it came quicker than expected. Amazon originally told me to expect it as late as April 11th. Mine is the Super Console X. I didn’t know there was a Pro till about two weeks after I ordered mine.
Hi there. If you have a PlayStation Classic "Mini" console, you can use one of the controllers, it works perfectly with the Super Console X, I have tried it and it is absolutely perfect, especially for those retro fighting games and retro scrolling up shooters ☺!!
@@TonySkittleAlive184 hi there. I tried using ps4 controller but the original usb dongle doesn’t seem to read it. Do you think I should get another dongle?
For anyone who wants to use PS4 controller, you have to use usb receiver for Bluetooth (make sure you buy a good one, I bought some cheap dongle and connection went on and off every 5 seconds). Now if the console doesn’t read the usb, then you have to use the original stick to set it up at bluetooth controller setting. Later it will be read as wireless controller and you’re ready to go
Oh and if you want to use the original dongle, make sure you get a gamepad with 2.4g connection
Have you ever had issues with the hot button? I got my ps4 controller to work fine save for that and i have to shut the unit off to switch games
Can you configure the controller for different systems/emulators like mid game instead of having to reconfig everytime you choose a new system
See if I messed up configuring the gamepad and now only two buttons work. How would I go about reconfiguring the controls
How do you restore the controls to default when the controls are screwed up. Somehow I can only use L2 & R1 to select in the main screen. This makes it hard to navigate and it won’t let me change the configuration. It just exits me out. Anyone know a way around this
I'm having an issue. I got a 8bitdo pro 2 and I maped the buttons just fine but when I go in to game I get a controller not configured error. Only thing I can do is bring up menu with y or quit out.. oh and for somereason when I unplugged it and plugged it back in it now reads it as a generic xbox controller
What should i do if my 2nd controller wont press start when i play dreamcast, mame or any emulator that has a multiplayer. Eventhough i already configure correctly my 2nd controller. But when i turn off my controllers. And try to turn on first the 2nd controller. The 2nd controller became the 1p in the game or the master controller. So now my 1st controller wont press start or wont work.
How do I set up and restart my controlling in retroarch?? My remotes are plug in and working but when I play games the controlling is all wrong and I can't click accept to go into the input change keyboard and all I need help!! Plz
same here
Do you need batteries for the controller to work or can you just use the USB port instead
What happens when controller 1 disconnects for some reason while switching save slots (hot key+ right d)?? I cant seem to reconnect controller unless i power down
Im having an issue when i start a game the controller stops working normaly and tries to do other things like lower the volume or reset, switches between slots to save in and so on.
cant play any games.
B & Right Trigger always mapped together on the game boy Advance , even when I change the control scheme?
Same on N64!
Is there an n64 controller that works with the super console x king? If not can I find out how to play the n64 games on the console making use of all the buttons so I can play them as intended?
Once again, you've provided quality content that's both informative and entertaining. I'm going to subscribe right now.
Anyone figured out how to make the console remember the Bluetooth controller and mapping for the next reboot??? Mine keeps forgetting my Bluetooth controllers...
Does Bluetooth pairing work on the Super Console X?
No. You need a 2.4ghz controller.
The Xbox 360 controller you mention has a wire. Does the Super Console X work with a wireless Xbox 360 controller? Or does it have to be wired? Also would an Xbox One work with this? Cheers.
Hi I’m sorry I’m lost. I played my super x at least ten times and I now can’t get any of my controllers to work. I have the PlayStation type that came with it and SNES wireless as well as a cheap Xbox and a blue tooth Xbox. I can control the main screen but as soon as I get into a game nothing works.even games I played don’t work!I do the configuring on the controllers then I can’t even exit out of the game. What am I missing?
Is there a red light on the usb dongle that you put into the console to detect the controller? I cant seem to be able to find any controlkers at all, tried charging my phone on usb points too and not reading anything at all, do u think its faulty??
I can't access anything in the menu nor scroll only the left d pad works and it's pretty much start button how the eff do I reset the controllers!
I mapped controllers same way you did... Was playing wrestlemania arcade ver. Can't bring up in game menu for input dip switches etc. Brought up Black small box menu before in game now I can't access the in game menu thing. Help plz?
Hey man! Every time I open a game in Mame the system forgets the input changes I made before. Is there any way to save the config changes inside mame? I'm having problems with the left joystick button, because by default that button opens the configuration menu. And it is impossible not to press that button while playing Fighting games. it's super annoying!
Im trying to use the pack in ps2 wireless controllers that come with the super console x to play an amiga 500 game. The problem I have is that it recognises the controler but some of the games keys were on the keyboard. Im using the amiberry emulator and It will not let me map keys
I bought additional pads 2.4 ghz ps3/pc and it does not detect them. What emulator needs to be written to fit the console? Linux maybe?
I change some configuration button on the game for chaos final rage. And I can’t even touch the game to play it. What do I do?
Could you show how to do a save state with a n64 usb controller. That is driving me nuts. Can’t seem to access retroarch menu when it’s plugged in. I’ve tried everything. Keeping the Xbox controller plugged in and keeping a keyboard plugged in. It’s irritating. The n64 controller works fine just can’t save or load.
Press both stick buttons to access the 65kw emulator menu.
In the emulex menu you can select from 4 different emulators. I had the best luck so far with the one that starts with 'P'. In the N64 menu for the default emulator, before I found the others, I had to change the setting for the control stick function mode before they would work. Also, the hardware can't seem to handle resolutions over 640 very well.
How to make start and select button when you press them at same time two times you exit the game
I'm looking for the answer as well if anybody knows. Please reply
Thanks for the guide -- I find it hilarious that you have 3 Ninjas Kick Back in your "Favorites" section :D
Yeah made this video quickly I noticed people where asking about this all the time. Tomorrow another one and than... back to he main channel 😅.
@@PackageFromChina Haha, no worries, it's just funny that you have such a terrible game on there :) It was a terrible movie, too! I remember loving the first movie when I was a kid.
@@RetroGameCorps terrible might not be the word. as old and game savvy as i am, i die super fast on the very first level! the movie was meant for kids but definitely not the game.
I finally got my player 1 controller to work. Now how do I configure player 2 so it matches player 1? When I change it the same way, it doesn't seem to save.
Hey thanks Mate! I've a question, I hope you can help me :(
I use the PS4 Dualshock (OG) with cable, BT is not working, yet.
Everytime I do the button matching, I can not setup the thumb clicks, it will always be recognized as Axis Movement... I think they are too sensitive... Is it possible to change the sensitivity?
It is making me crazy!!! Thank you again and have a great weekend!
Has anyone figured a solution to the controller not being able to open up the menu. Just received the unit today, hooked it up for the kids successfully mapped controller 1 then when trying to map the second controller the first controller stopped responding. And after reading some of these comments, this seems like a popular problem, just wish I saw that before buying 😕.
Have you tryed turning it on then off removing the controllers then turn it on again it will say no controllers detected then put the original controllers back in it will say press a to configure them but dont push anything then it should just say default xbox 360 controller in port 1 and port 2 they should work fine then
I am having a problem where everything works fine when playing with two controllers but then after I turn the second player controller off it will no longer let us play two player games with both controllers.Both controllers will work in the menu ect but will not work at all in two player games.I am using the controllers that came with the system.
I have just bought a Kinhank super console x and trying to configure the included controller. The console recognize the two Microsoft X-Box 360 pad after I hold A button to configure the controller, but I am unable to go to the next step to map the controller no matter what button I press. When I highline the controller and move the joystick to the right, a small windows pop up with INPUT P1 #0 Microsoft X-Box 360 Pad, if I move the joystick to the right again to choose it, it takes me back to the controller settings screen again. I just cannot go to the controller mapping page. The left joystick is the only thing work that allows me to move up and down to highline what I want, and move left or right to choose, nothing else is working. I cannot use the controller without controller configuration. Can you tell me how to go to the mapping page from Controller settings page?
Hi. Id really like to play punisher for capcom I system but controller doesnt work. How to set it? Pls help I love this game.
On the super x console pro my controller won’t allow me to get to the controller settings to change it how can I reboot the remote to start it over
Mine too
Same here, there's no easy way to reset the controllers if they get misconfigured. I had to send back.
@@sheepdog2884 Sure there is. Power the system off. Unplug your controller. Turn it back on, and it will say no controller detected. Plug your controller in. It will then go through the configuration again.
I'm wondering why my usb keyboard doesn't work with keyboard games e.g. all the Sinclair spectrum games on this console X??
Great video. Appreciate the effort put into this.
Does anyone have clear instructions how to connect original ps3 and p4 controllers? They works when connected through a USB cable.
Tried connecting using the connect bluetooth controller function, but this seems to time out in few seconds on the console, meaning it only gives 4 sec window for it to find a controller. Any help is much appreciated as the controllers that came with it are not stable when using the left thumb stick. You press a little bit left ,the car (for example in mario kart on n64) swings too much to the left.
Bedankt
Use a Bluetooth receiver dongle and use the other stick to connect
The system dosnt have Bluetooth that’s why that dosnt work I got a Bluetooth dongle to do that or use usb controller
Setting up my Mayflash arcade stick totally crashed the system on the first night, and I followed directions carefully. I now have to return it to Amazon. Be careful unless you’re decent at rebuilding the memory card
Hello, how do you add and renove games to favourites?
i was able to configure the controller but when i turn it off and on it changes the button layout. How can i get it to save my button layout?
This thing is stressing me out like no tomorrow. Golden axe arcade and bonks adventure still does not work.
Ikr
@@METALFACEDOOMXXXX I returned it for a full refund to China. F*** this thing
@@ramza813 yeah I really wanted to play golden axe return of death adder but it doesn't work. I mainly got for fist of the north star and shmups like dondonpachi Darius. But alot of roms are ass. Plus I tried to configure the buttons and it was a chore. They got screwed up! So I returned for another one.
@@METALFACEDOOMXXXX that stinks. this thing had potential. plug in and play. most good PS1 and SNES games you can get on your phone like SoTN and FFT. i bit the bullet and downloaded MAME and Golden Axe. its so awesome.
@@ramza813 downloaded where?
What’s the setting for fighting games w a Saturn USB controller
Cart wayt to get my one a china to uk plug wher or whats best to get
How do you set up the tv box controller and access the “tv box” features?
I got the cube and got the same controllers in the video and everything worked good. Then i bought some snes wireless controllers and configured them and it jacked the original controllers. Now when i go back to configure the original controllers the select button doesnt register that i am pressing it and after i configure one analog stick i cant configure the other, it says already taken. Is there a way i can wipe out all the controller settings?
My controller is connected but when I play n64 and choose Mario kart for instance it won't let me select a character. It reads all the other actions I choose but when I get to the player select screen it won't read the controller
Is there any way to set up the joypads for rapid fire? So when you press one button it does rapid punches etc.
Hi thanks for this helpful video, but is there a fix to help the delay of the controllers?. im using the ones that came with the system and there is a slight delay which makes things not so enjoyable. please any help?
have u fix it somehow? i exp the same problem
It's best to try and get a wired controler they seem to work better on the system and you dont get no lag when playing games
i wanted to know also. i'm not a fan of wired but i'm curious if anyone tried ps or xbox etc that didn't come with console and see if lag was still an issue.
@robert-asdf The best setting for me is to set the TV to game mode, which mitigates the delay quite a bit, but there's still a delay that's noticeable.
@@j8nkies20 tv to game mode.. guess that doesn't apply to my projector but thanks anyway.
Any way to reset a controller after you mess up the buttons.
I went onto the NAOMI games and there is a game called confidential mission it's a light gun game but the controller doesn't work with it I think you need a usb light gun to play the game do you know what light gun would work with the game
My controller is configured wrong, I can’t get to menu to change it back. Is there a way to hard reset or trick to configure from default?
Will a wired power A xbox one controller work with the super console x
If I buy a usb nes and snes and Sega controller will it work wit the super controller x-pro
You said that ps4 controller doesn't work with your emuelec, but it 2 years past.Did something change or not, because I want to buy ps4 gamepad and don't know if it connects properly.
I bought 2 wired usb controllers and tried to configure both of them but had the same problem with both. I can configure every button correctly except the right trigger. Everytime I try it skips to the next button and says "no setting" next to right trigger. Really pissing me off. Any suggestions?
Hello I was trying to change controller's set up I've messed up everything then pressed ok,now I can't access Main Manu and can't set it up again.Any other way to do it?Please help
Easy thing is to do ... unplug all controllers.
Boot up system ...
Grab a new controller.. setup.
When 1 has been config correctly .. you can config the other 2 again you made a mistake with.
Can someone please tell me why every time i try to play any game if i press the B button it resets :( also Y is menu ???? Anyone know how to change this!!! I’ve been waiting months for this to arrive and i literally can’t play any games
This happens to mine too. Can anyone help please
Same here. It's really really pissing me off!
I have been trying to configure the fake PS controllers the rero x came with just to START a game for 2 hrs with no luck! This is insane, configure in the menu fine per instructions, tried different games on different systems and I literally can't even start any, it's like the Start button doesn't work. It's even mapped properly in the quick menu that you can bring up in-game. Are these controllers it comes with faulty?
In most games only the startbutton of controller 1 works and it seems to be some game of chance which controller the scx recognizes as the main controller, Plug in both of them and switch them on. When in the game the startbutton of one con doesn´t work, try the other one. Once you figured out which one is recognized as main controller, go into the main menu (emuelec), open controller settings - controller 1 and chose the con you prefer. After that it should stay the main con, at least until it gets unplugged.
So I messed up my configuration in can’t pull up the start menu now because how I did it how do I fix this problem
Me too
Same thing...
did you guys figure this out? happened to me also
Hi I was messing with my controller settings now only two of my buttons work the rest do nothing please help
hello you can set up a laser gun for this console as there are some games that need such a controller
My ps4 controller working amazing, BUT... some days later it working normally at the menu only but on the games is dead i remap it but nothing, why any idea?
I needed this video so bad thank i kept messing up trying to set up my controller you’re awesome
Hello dear sir...so i made a mistake to try and change the contoller buttons...now the first controller is working as a prime one..meaning doing all the start,select fights...the second one is moving left,right etc but when i go in the game i can select to start a game...it doesnt work at all...what should i do?is there a way to make the second controller work properly as well?go back as it was?maybe reboot?if i am saying it right...
I just got my Pro today and my controllers do not connect up.
They came with the box, Power and Mode button just flash on pressing the Start button and nothing happens on screen when I hold down the A button.
Did get a plug in PS3 Controller working on it.
i love how everyone made multiples videos about the basic setting that are already shown in the console.. .. what we want is a video that shows how to fix a controler that been setup which dont work once in emulator. I did some change in the proper section for retroarch but since this console doesnt act the same as expected behavior from retroarch it keeps breaking everything. We need a video that shows the do's and don't in retroarch setting and optimisation since some could break the whole installation and doesnt produce the expected results...
How to set up the time on the super console xpro can u tell me
Every time I press the Select button it resets the game. How do I configure the Select button so it doesnot reset the game i am Playing?
Configurei o controle q veio com o super console x ele funciona no menus mais não funciona no jogo pode me ajudar?
Im all set up, and I select PLASTATION .............. and it does Nothing. It says 54 games, I hit select X & A but can NOT get into the plasystation games. It will just take me to the controller menu rather than into the game listing. Do we have to go into the controller menu everytime before we get to the games?? Just want to play shellshock but cant get past the Playstation logo. so frusterating.
Appreciate this video. I’ll check out the emu chicken video w the xbox controller. Thanks
I was able to get my xbox controller functioning. Had to buy an adapter. Very easy in the end. Thanks again!
@@heathkucera I'm trying to get a 360 controller to work, what adapter did you use?
I just got the game console and I don't know what I did but the start button does not work. Can someone please help me 😢. I can't reconfigure the controller now or even play alot of games.
Did you figure this out? I just got a retro x and the buttons work in the menu and I configure it but then I can't start any games. It's like the freaking Start button doesn't work! I've been messing with this for over an hour and cannot get it to work.
I’m have problems setting this thing up. I need help. Can someone please help. I had to config the controls 4 time already. Need a computer person.
questiong do you need to connect the ethernet wire also?
What was the name of the ps4 controller you said works?
Hey Wicked,
Super bedankt voor deze informatieve uitleg.
Zojuist geprobeerd om mijn xbox 360 controller op de super console x pro aan te sluiten maar hij herkend de controller niet.
Wat doe ik verkeerd?
should you set the "mode" button as the "hot key"?
Could you show me how to set up the controllers for the Genesis? I have tried for the life of me, but it's not working right. For example, when playing Sonic The Hedgehog, when I want to move right, he jumps. Or another example, when I play NHLPA '93, when I move right, the person with the puck passes. Any help would be appreciated.
That happens if your controller is in 6 button mode vs 3 button mode. I had the same problem on the original Genesis, but I don't know how to fix it on here.
Do you know if the old Xbox 360 wire controller works?
De gamepad werkt goed in het spel, maar toch nog een probleempje.
Er zijn allereerst eigenlijk 3 knoppen te weinig om alles in te stellen.
Ik heb de select knop ingesteld om een game te verlaten(the hot-key), maar dat werkt helaas niet.
Tot nu toe zet ik de super console X iedere keer volledig uit en daarna weer aan om naar een ander spel te gaan.
Is dat misschien de enige mogelijkheid, of doe ik toch iets fout?
Ik heb ook een Xbox 360 ingesteld en daarbij de zilveren knop gebruikt om de game te verlaten.
Ook daarmee lukt het niet om een game te verlaten.
Thank you very much . I download a game a dreamcast but game don t react on controller. Do you have idea why ? Thank you
us, pal, ntcs, uploader, region, that type of thing. gigawing and gunbird for DC that came installed don't work but didn't care about the game enough to look for which site/upload works.
Great Video!! I was wondering if this system would be compatible with the "X-Arcade Tank Stick"?
The X-Arcade Tank Stick is a 2 player arcade stick that uses only 1 USB to connect to a computer or gaming system.
Are you familiar with it and do you know if it's possible to connect it?
Thank you, I appreciate it :)
I completely messed up the controller settings. How do I reset the controller settings? Thanks
same here, did you figure it out yet?
@@scotteisenman819 No not yet.
Power down and back didn't let you reconfigure? Power off, Unplug dongle, power on, and plug back in the dongle? Otherwise, there is a youtube video for reinstalling the system completely.
Do you have a solution?I have the same problem ,messed up the settings?bought the system ,arrived today en messed up completely,please let me know much appreciated 👍
Im using one controller but every-time I play one of those arcade games its mapping player 2 as well. I just want to play solo its annoying. Any way to fix this?
Have you tryed putting the controller in a differnt USB port on some games emulators they recognize each usb port on the console as over player 1 or player 2 on controllers configuration put the controllers as player 1 and player 2 to which controller you want to be recognized as player 1 or 2
Can you show how to pair a bluetooth controller? I hit pair Bluetooth controller but never finds one im using a ps3 controller
How to set up xbox series x controller on super console x pro by magic ns ?
switch pro controller is working but xbox series x controller not working !!
Ok, assuming you don't have a wired controller connected, how do you connect and pair a Bluetooth gamepad?
What remotes can you buy for this ive bought 2 they didnt connect... Wireless
Can an 8bitdo Xbox arcade stick work on it?
I have a problem. When i play 2 players game sometimes both controller disconnect and reconnect at the same time! And it switch from player 1 to player 2! Is it something that happen to you? Is it the cheap controllers or the usb splitters in problem?? Thanks!
same here
Question aside from this video…can u rig one of these to a full size arcade?
Arcade without coin mech you can use it yes.
Only with the right encoder boards like xbox 360 is should work.
@@PackageFromChina any of which u can recommend. I’m trying to build an arcade and go about it the right way with this since I have one loaded
My ps4 controller working amazing, BUT... some days later it working normally at the menu only but on the game is dead... why any idea?
I have got this problem and i've done default system settings. Łatwe you mus only in main menu configured settings, one time.
Where have you bought these controllers, these look like ps4 controllers but with dongles with it. Could you, or anyone in this section please give me some info. I am looking forward to buy controllers for my ps4, but if they work with super console x that would be amazing
Try using Bluetooth dongle
the super console can do bluetooth controllers so dualshock4s work and certain xbox controllers
How to free up more RAM for heavy games?
Bonjour, j'ai bloqué le menu. Auriez vous la séquence bouton pour le débloquer merci
HELP. The gamepads work in the menu but are not configured in the games :( This has only happened today
Same issue here
@@ronniesmith6348 I had to install version 4.0 of emuelec to get the game pads working
@@igb2904 damn. I figured that...I currently dont have a pc...well looks like I gotta wait for my friend till I can update it. Did it do anything strange on the startup for you?
Idk its acting strange all the games say missing assets( and missing sounds) and it wants me to use the online updater. Hopefully just needs the update.
@@ronniesmith6348 nope. On 3.9 it’s just told me about the update but it didn’t have enough space to install update even though I extended the partitions
Nice vid, do you know how to pair 8bitdo via adapter to this console?
If I order the pro from Amazon will I get it quicker?
I ordered mine from Amazon on February 10th and it arrived this week on March 4th. It still shipped from China, but it came quicker than expected. Amazon originally told me to expect it as late as April 11th. Mine is the Super Console X. I didn’t know there was a Pro till about two weeks after I ordered mine.
@@Guile-NYC ok thanks all I need to know for now
Do the controllers that kinhank sell on their website work ?
Anyone have a problem with L analog config on super x pro controller? Nothing happens with L stick but R stick is ok. Very frustrating.
You can suggest me a nice pad to buy, that works with this superconsole, i wanna change the original pad that are no good, thank you
Hi there. If you have a PlayStation Classic "Mini" console, you can use one of the controllers, it works perfectly with the Super Console X, I have tried it and it is absolutely perfect, especially for those retro fighting games and retro scrolling up shooters ☺!!
@@TonySkittleAlive184 hi there. I tried using ps4 controller but the original usb dongle doesn’t seem to read it. Do you think I should get another dongle?
@@TonySkittleAlive184 okay thanks
@@TonySkittleAlive184 made it. I bought Bluetooth dongle receiver. But it needs the other stick to connect it