SUPER5 OLED Touch - Product Overview & Installation Guide Part 2

Поделиться
HTML-код
  • Опубликовано: 17 дек 2024

Комментарии • 118

  • @TakiUdon2
    @TakiUdon2  20 часов назад +27

    retroremake.co/pages/super5
    2 tutorials down, and 2 to go.

    • @qlnzky
      @qlnzky 19 часов назад +2

      You are doing great work, just take your time. Most people have no issue waiting on products/videos if it is to make sure they are good quality.
      Most people also did not expect to ever see a switch lite oled mod in general so we appreciate you anyways!

    • @DavidLealSoto
      @DavidLealSoto 18 часов назад +9

      Can't wait to see the OLED + Touch + HDMI out one!

    • @Fleshlight_Reviewer
      @Fleshlight_Reviewer 17 часов назад +3

      Where's the HDMI out 😂

    • @1972Aftershock
      @1972Aftershock 14 часов назад +2

      @@DavidLealSoto Absolutely, its the OLED Touch with HDMI out I'm most intersted in. The Ultimate in portability and the ability to also output to HDMI when desired.

    • @dreadlord9257
      @dreadlord9257 8 часов назад

      Any chance you'd consider some kind of daughter board that allows you to use this with a raspberry pi 5? I feel like it's very slim pickings for pi based projects (in terms of color and/or responsiveness).

  • @nusilver
    @nusilver 18 часов назад +32

    I notice you skip over the part where you're putting the new metal plate on when wrapping up the installation--perhaps to gloss over the fact that it covers up the top GPIO button? I know multiple people who have the excellent non-touch kits have pointed this out, but I don't think I've heard a response on this. Wasn't the point of having the buttons oriented horizontally, as in pre-production revisions of the kit, supposed to be that the GPIO buttons would be easily accessible if we decided we wanted to change profiles? What happened there? And should we be worried about the plate pressing that top GPIO button?

  • @ThomasLeskin
    @ThomasLeskin 19 часов назад +13

    Can't wait until this comes back in stock in February. Looking forward to picking one up. Missed the first round just with all the gift buying for family and friends this time of year.

  • @jierenzheng7670
    @jierenzheng7670 19 часов назад +25

    Excited for the upcoming V1 OLED screen!

    • @Agent_Banana11
      @Agent_Banana11 19 часов назад +1

      V1 OLED? Is that real? Did he announce it?

    • @yovslosotros
      @yovslosotros 19 часов назад +6

      @@Galaga_yup it’s called super7

    • @Shiny_Diglett
      @Shiny_Diglett 19 часов назад +1

      couple video back he announced oled mods for the original switch, ds lite, 3ds and psp. on his twitter i think the original switch oled mod was called super7 oled

    • @TechThusiast
      @TechThusiast 19 часов назад +1

      Why for V1 oled though?

    • @linkdelodela
      @linkdelodela 18 часов назад

      @@TechThusiast v1 hack

  • @famouskidvgi
    @famouskidvgi 12 часов назад +1

    Excited for mine to come .. looking at the case ..inspires me to go for the new case too

  • @manzup3r
    @manzup3r 18 часов назад +3

    niiiice, the picture quality looks insane, and that shell looks 🔥

  • @jackipiegg
    @jackipiegg 18 часов назад +8

    17:14
    Do we need to take out the shell and press that button every night to get 1 nit?

    • @Toons91
      @Toons91 16 часов назад +1

      yes that Seems to be the case

    • @jackipiegg
      @jackipiegg 16 часов назад +3

      ​@@Toons91
      LOL what a dumb design choice.

    • @eldarmark
      @eldarmark 8 часов назад

      @@jackipiegg There's no way around it without cutting holes in the case. You can't run arbitrary code on the switch to detect button presses, for example. Although, maybe in a future update since it's already involving a shell swap...

    • @davidp137
      @davidp137 6 часов назад

      Yeah that’s the weird part of this mod everything is so well thought except that

    • @jackipiegg
      @jackipiegg 5 часов назад

      @@eldarmark
      dude, gameboy mods from 5-10 years ago have combination keys to do adjust brightness. Their engineers is lacking in skills.

  • @OniGhoste
    @OniGhoste 16 часов назад +1

    Amazing tutorial, super hyped for my Mega Kit

  • @hanneswagner6565
    @hanneswagner6565 56 минут назад

    I ordered my OLED touch - mega kit yesterday. I will use a black metal shell and white buttons aiming for a blakc&white design. If the display comes already assembled into the replacment shell, I hope I can remove it without problems. Since it isn't mentioned on the product page I still hope it will be delivered as seperate pieces.
    After looking at the tutorials I think I will cut a hole in the metal shielding plate to avoid pressure of the 10pin FPC connector on the battery.

  • @wolvrG
    @wolvrG 19 часов назад +1

    I have ordered non-touch and it is in transit. I plan to do a full shell swap and this would be super helpful in that too.

  • @ethnanmena6290
    @ethnanmena6290 16 часов назад

    Thanks for posting this video! You are really upgrading the retro scene with your devices!

  • @ethanvalentine4299
    @ethanvalentine4299 10 часов назад

    I can't wait for mine to ship :) super excited that this product exists thank you Taki!

  • @eldarmark
    @eldarmark 19 часов назад +3

    For us Mega Kit preorders does this give a general idea of how the install process will go for that? Disconnect everything and move it to the new shell, while maybe swapping out some components in the process? And the HDMI mod at the same time, I guess.

    • @chosen3033
      @chosen3033 9 часов назад

      this is most definitely the case yes. it will be different because of the hdmi board obviously but the process should be similar.

    • @chadwadsworth413
      @chadwadsworth413 5 часов назад

      @@chosen3033I don’t think so. It’s advertised as just needing a simple motherboard swap. The screen is already installed in the replacement shell.

  • @eddyhg8098
    @eddyhg8098 19 часов назад +2

    Just wanted to thank you for your effort, and I will definitely get the Switch 2, 8 inches OLED mod when it comes out. (Kinda disappointed in Nintendo going back to LCD, dammit)

  • @GlitchyGokuBlack
    @GlitchyGokuBlack 19 часов назад +6

    Will you do a tutorial that will have the TV out upgrade?

    • @skycloud4802
      @skycloud4802 14 часов назад

      I can't understand how it'll work without jailbreaking the firmware. Surely the Nintendo Switch Lite is omitted from TV out mode, not just by hardware, but at the OS level too?

    • @StaticNebula26
      @StaticNebula26 8 часов назад +1

      @skycloud4802 my thought was since it's a new screen, they just hijack the screen signal and convert it to a signal that can be sent to the TV

    • @skycloud4802
      @skycloud4802 7 часов назад

      @@StaticNebula26 I guess that could technically work. But there will still be limitations. The Switch screen resolution is 720p in portable mode, which is lower than the 1080p resolution when docked. Furthermore, some games may run at a lower frame rate or with reduced graphical settings in that portable mode.
      Mind you, I suppose it would be better than nothing.

    • @davidp137
      @davidp137 6 часов назад

      Yeah also the battery can get fucked maybe the mod kit should add more capacity battery and thermal paste as it seems to be required to make a final mod

    • @GlitchyGokuBlack
      @GlitchyGokuBlack 3 часа назад +1

      @davidp137 I wanna see him do a tutorial with all of the upgrades because I'm adding the screen,tv mode & battery mods

  • @cooper1095
    @cooper1095 12 часов назад

    ngl, this has been such a fascinating journey so far.

  • @Bouncedtuna
    @Bouncedtuna 17 часов назад

    Thanks for all the hard work you'll had to do.

  • @Timmy.johnson
    @Timmy.johnson 9 часов назад

    I've been waiting for ever

  • @chronossage
    @chronossage 15 часов назад +1

    I hope this means the mega kits are going to finally ship soon. The website got rid of the ships November line sometime in December. I can't wait for mine to finally arrive.

  • @gumbyx84
    @gumbyx84 19 часов назад

    Great install video. Can't wait to get my kit in.

  • @BennyBsolo
    @BennyBsolo 13 часов назад

    Can't wait to grab a screen/hdmi kit next go around. Thanks for all the hard work here . 👏

  • @Gonzilla56
    @Gonzilla56 7 часов назад

    excited for mine to come!

  • @NANOTECHYT
    @NANOTECHYT 3 часа назад

    I know you just did this project and basically just finished but we desperately need a Switch 2 OLED kit sometime soon after its launch.

  • @manueltomas3266
    @manueltomas3266 18 часов назад

    Amazing as always

  • @SrtRacerBoy
    @SrtRacerBoy 18 часов назад

    I have installed many hwFly's on switch lite's, and they defiantly don't need that metal shield, and it wont affect thermal performance to just not use it.
    Visually, I think the clear shells also look better without it.

  • @roba8569
    @roba8569 19 часов назад

    taki doing god's work as usual 🙏

  • @philharmonic2251
    @philharmonic2251 18 часов назад

    Just waiting for mega kits to come back in stock and I'm in!

  • @yovslosotros
    @yovslosotros 19 часов назад

    We love you taki ❤

  • @mokler88
    @mokler88 19 часов назад

    Yessss can’t wait for mine to land. Watching this a million more times🎉

  • @soiltek2015
    @soiltek2015 19 часов назад

    Awesome, Taki!

  • @TengenToppaSalyur
    @TengenToppaSalyur 6 часов назад

    This has me excited for the psp oled screen replacement!

  • @Agent_Banana11
    @Agent_Banana11 19 часов назад

    Finally! Christmas came early! 🎁🎄

  • @ptrix
    @ptrix 18 часов назад

    Great work! Some quick questions1. will future versions of the kit include some kapton tape (maybe 2-3 cm)? could future versions have the lower-right section of the shields reshaped to avoid the edge interference of the lower shell, or perforated to make that section safer/easier to remove if needed? And final question, are there any possible use cases for the original screens after they are replaced (ie. could they be easily used with 3rd party devices such as Raspberry Pis, other portable gaming consoles, are there markets for resale or could they be donated to electronics repair shops? I would hope that they wouldn't have to sit forever in the pelican case collecting dust.. What do you do with them?

  • @Scriven42
    @Scriven42 9 часов назад

    Atomic purple everything!

  • @gortys3929
    @gortys3929 14 часов назад

    Thanks for the video! Any prospects on restock of the screens?

  • @OkiDingo
    @OkiDingo Час назад

    I don’t understand the profile buttons being stuck under the shell. Instead of let’s say a key combo like hold + and up. Also won’t they get pressed by the back shell?

  • @anthonyrossetti7509
    @anthonyrossetti7509 18 часов назад

    Wow never realized a lite screen swap was so involved. My lite has a SX lite chip and I sent it out for that.
    I want the super 5 plus HDMI mod but I am afraid I might disturb the mod chip install during this process.
    I also love my yellow lite shell and am not really interested in shell swap but the aluminum shells are very tempting.
    I got a full aluminum shell fir my V1 and I am waiting for the super 7 to put that on.
    Maybe I would get ametal gild shell of they have one that looks like the zelda shell only in gild anodized aluminum.

  • @Guitario666
    @Guitario666 12 часов назад

    Hey Taki do you recommend swapping out the analogue sticks since you have the console opened up? And which sticks would you recommend?

  • @irariossr.8959
    @irariossr.8959 19 часов назад

    This looks great! As there is estimate on when ordering will be available again?

    • @ptrix
      @ptrix 19 часов назад +1

      I believe February

    • @irariossr.8959
      @irariossr.8959 18 часов назад

      @@ptrix Thanks

  • @Nick-hz9no
    @Nick-hz9no 18 часов назад

    I miss your retro handheld reviews, and your musk.

  • @skycloud4802
    @skycloud4802 14 часов назад

    Will that case and screen allow room to swap out for better hall sensor sticks? I absolutely hate the Nintendo Switch sticks.

  • @GangityBirdity
    @GangityBirdity 19 часов назад +2

    LETS FUCKING GOOOOOOOOOOOOOO

  • @eathenalexander2836
    @eathenalexander2836 4 часа назад

    Can you still control brightness from the console software or only through the buttons at the back?

  • @roviverdandelarosa2181
    @roviverdandelarosa2181 17 часов назад

    Do you ship to the Philippines? Planning to order the mega kit when it comes back in February.

  • @ab_ria
    @ab_ria 15 часов назад

    This screen mod is definitely worth the wait and delays

  • @박휘빈-j4x
    @박휘빈-j4x 11 часов назад

    When the mega kit video uploaded and shipped?

  • @Rosa_Canina
    @Rosa_Canina 15 часов назад

    This might help someone: My oled lite did change the profile by just tapping around the battery for some reason. I put some tape over the connector that sits over the battery and under the metal shield and the problem was gone. Weirdly enough I only had the problem after opening the system up a second time to change some buttons I didnt quite like. First time nothing was wrong at all.

  • @RedstoneBros
    @RedstoneBros 16 часов назад

    Is there an estimate for when the first pre orders of these will ship?

  • @red1spike517
    @red1spike517 4 часа назад

    When will more be in stock with the hdmi board? I waited till pay day and you sold out

  • @iamnotnoahgames6105
    @iamnotnoahgames6105 18 часов назад

    Can’t wait to get this mod when it comes back into stock. I do have one question about it though. How do we do the hdmi mod? I can’t seem to find a tutorial about it

  • @RICHIE0NE
    @RICHIE0NE 19 часов назад

    Yes need this for real let's goooo !!!!!!!

  • @JdeAcuario
    @JdeAcuario 17 часов назад

    will february restock be available to Mexico?

  • @MegamanX174
    @MegamanX174 17 часов назад

    So, can you install it like the non touch one? I like my shell and don't want to replace it.

  • @TheFlyingHernie
    @TheFlyingHernie 12 часов назад

    Can we not swap the Super5 Touch screen like you did on the other video you posted? I don't plan on doing a shell swap.

  • @MR-Santos-PR
    @MR-Santos-PR 21 минуту назад

    I have mine
    Love it
    I just finished a video for my small Spanish RUclips channel. So now you will have Spanish promo

  • @Ebrand0n56
    @Ebrand0n56 14 часов назад

    is capton tape something I have to source myself?

    • @fraincs
      @fraincs 13 часов назад

      most likely

  • @justgamingentertainment
    @justgamingentertainment 13 часов назад +1

    i wish you would make v1/2 switch oled mod

  • @winterhell2002
    @winterhell2002 5 часов назад

    1 nit sounds wild

  • @Pit0fDespair
    @Pit0fDespair 16 часов назад

    Ordered mega kit 10/4/24. When are they shipping?

    • @ccchan2649
      @ccchan2649 13 часов назад

      you didn't get the email?

    • @Pit0fDespair
      @Pit0fDespair 13 часов назад

      @ no, I was given a tracking number that was delivered to some other address on 11/12/24 then called ups and emailed them about it and was told my order hadn’t shipped yet then contacted them again and told I’d be provided a tracking number when mine does. So, what email are you referencing? I’m fine to wait but haven’t been given any explanation.

    • @ccchan2649
      @ccchan2649 13 часов назад

      @ there was a long email explaining the whole situation. I’ll post the whole thing here in a minute for you

    • @ccchan2649
      @ccchan2649 13 часов назад

      @@Pit0fDespair Hello,
      You are receiving this e-mail because you have a current SUPER5 OLED preorder with a listed November shipping date. Please read the following e-mail for a status update on your order.
      SUPER5 OLED Touch
      Creating a custom glass touch panel for the Switch Lite has been an extremely challenging journey. When SUPER5 went on sale at the end of September, we had two independent companies working on a touchscreen solution. The first company had a working plastic touchscreen, while the second only had failed glass panels that did not support continuous touch.
      Based on the time it takes to produce prototype revisions, I set a November delivery date to give us enough time to create at least three further revisions. Unfortunately, that wasn't enough.
      Company A
      Let's start with Company A since they were originally the main hope that we had to meet the November shipping date. This company had a working touchscreen from day one because they worked with a company that produces clone digitizers for the Switch Lite. This company can do color-matched digitizers, but I limited the options they needed to produce to white and black. That is why those were the only colors available at launch.
      As I stated, this company had a working plastic digitizer before we started to sell SUPER5 in September. Since they have a working plastic digitizer (touch film glued to a plastic front plate), they should be able to just glue the touch film to a glass panel and call it a day, right? I wish it were that simple.
      Capacitive digitizers are incredibly annoying, and anything that you put in front of them changes the way they work. If you take a film that has all of the correct values from a plastic frame and put it on glass, all of the values change and the screen will no longer work. It will either have zones with no input, or it will not support continuous input (IE, you can't drag your finger across the screen).
      To date, this company produced two working plastic touch panels, and two failed glass touch panels.
      Company B
      That brings us to Company B. This company is the one that I used to color-match all of the stock Switch Lite screens. If they could make a working glass digitizer, that would mean we could offer replacement touch displays in the 8 original colors. The problem is they had no idea how to make a working digitizer for the Switch Lite.
      When SUPER5 went on sale in September, this company had two revisions under their belt and neither of them worked. Out of 720 possible lines for touch input, their first two screens could only register input on 1-3 lines.
      On September 28th, the company gave us the 3rd and 4th iteration. These screens supported continuous input, but only 90% of the screen was functional. The problem is that they didn't know why the other 10% didn't work, and they initially didn't seem motivated to fix it (I was asked if 90% was acceptable for mass production and I refused).
      We had a big meeting on October 10th with their engineers to try and get to the root of the problem. Using their debug tools, we were able to determine why their first four screens didn't work, as well as what they would need to do to create a working screen. I was very optimistic after leaving that meeting because even if they couldn't create a working screen, I could at least explain to another provider exactly how to do it.
      From October 10th to now, it has been a rollercoaster of ups and downs with Company B. Here's an overview:
      October 17th - Versions 5-9 are created, and they have dead input on the left and right sides. Several do not support continuous input, and they also have grounding issues.
      October 28th - Versions 11 & 12 are created. Version 11 passes my tests and fully works. I request OCA samples for final verification before mass production.
      November 16th - 4 OCA verification samples arrive. All four fail to support continuous input and can only work when they are manually grounded on each reboot. Debug data shows a 5% increase in capacitance value over version 11.
      November 25th - Versions 13-16 arrive. All four work.

    • @ccchan2649
      @ccchan2649 13 часов назад

      part 2
      SUPER5 HDMI
      Like SUPER5 OLED Touch, SUPER5 HDMI has been a challenge to finish. When SUPER5 HDMI went on preorder, we had our first prototype revision made. I originally did not plan to preorder SUPER5 HDMI at all, but we had a lot of requests from potential customers to allow them to preorder this SKU during the main launch.
      SUPER5 HDMI was supposed to ship 30 days after the non-touch SUPER5 OLED screens, and that would give us a little over a month and a half to iron out issues before shipment. It would also give us enough time to do at least one further hardware revision in a worst-case scenario.
      We are now beyond the worst-case scenario. We have done ~3 SUPER5 HDMI revisions since September. The first two failed either due to manufacturing complexity or signal integrity issues. Three days ago, we finished work on the 3rd revision. Unlike the previous two, the HDMI side of this revision fully works, and it is amazing to see it in person. The problem is that the OLED half of this solution doesn't work due to signal integrity issues.
      Unlike SUPER5 OLED Touch where I can estimate the shipment date with a margin of error of two weeks or so, SUPER5 HDMI has too many unknowns. What I do know is that we need at least one further revision to fix the OLED signal issues. That revision is happening right now.
      Depending on the complexity of this revision, it can take up to 20 days to get a prototype back. That prototype then needs to be debugged to see if there are any further issues. If there are no further issues, we are looking at an additional 20-25 days to get back a mass-production version.
      Again, all of this assumes that the next revision is the final revision. If it is not, you can see how things can get out of control.

  • @serhii_himself_98
    @serhii_himself_98 19 часов назад

    When will it be available for sale? :)

  • @nevesdasilva77127
    @nevesdasilva77127 15 часов назад

    J'en ai commandé deux je n'ai toujours rien reçu, c'est normal ?

    • @fraincs
      @fraincs 11 часов назад

      oui avez vous reçu le courriel?

    • @nevesdasilva77127
      @nevesdasilva77127 10 часов назад

      @fraincs je l'avais loupé en effet, expédition le 20 décembre si j'ai bien compris ?

  • @HendraWijaya1983
    @HendraWijaya1983 19 часов назад

    Can i mod the dpad and replace it with ps vita dpad?

  • @bradjohnson5323
    @bradjohnson5323 7 часов назад

    just saw my mister pi cleared US customs. YAY!

  • @holmesfutrell
    @holmesfutrell 18 часов назад

    my dream would be an OLED display that would also reduce the size of bezels on Switch Lite. Is such a dream even possible though?

  • @vincentvega3093
    @vincentvega3093 19 часов назад

    Nice. Well, need to keep the Zelda shell 😅

  • @carlosfabianestupinancarri5014
    @carlosfabianestupinancarri5014 9 часов назад

    Una pantalla oled más grande estuviera aún más genial

  • @JoRoBoYo
    @JoRoBoYo 14 часов назад

    finally. ah not the hdmi out one.

  • @dualnight4217
    @dualnight4217 18 часов назад

    A video demonstrating the HDMI for Nintendo Switch Lite.

    • @fraincs
      @fraincs 11 часов назад

      there's one already

  • @davidaamaya1
    @davidaamaya1 10 часов назад

    I hope analogue sees this and works with you to make an analogue 3D ➕️

  • @CuriousTinkering
    @CuriousTinkering 13 часов назад

    Finally

  • @animationalltout3134
    @animationalltout3134 19 часов назад

    Steam deck v1 oled mod when ?😅😂

  • @MagnusHydra
    @MagnusHydra 19 часов назад

    Looks great. Hope we resolve the customer support problem soon.