Thank you. Excellent video. I recently had to evacuate and charge my mini split but did not know about this tool. Does the EEV need to be manually opened to ensure a proper evacuation and that the liquid refrigerant finds it's way into the outdoor condenser? Very inspiring video.
Thanks for watching! With a 1to1 minisplit it is not critical to open the EEV manually for evacuation as there is only 1 metering device. Therefore, there is no potential for refrigerant to become trapped.
@@quentinbutlerhvac5410 Thanks, I tried those last week and it pressed the steel housing inwards and pinched the magnet. New blade and went the slowest I ever had with copper cutters.
Hmm.. Not with any valves that I’ve worked with. The EEV motor is essentially just a coil / stator. Without anything energizing / magnetizing the coil, it doesn’t have the ability to turn the magnet (rotor).
@quentinbutlerhvac5410 i removed an EEV magnet, i also cut out the valve section and tested the magnet by blowing into the valve, rotating the magnet clockwise closed the valve while rotating it anticlockwise opened the valve, confirmed by me blowing into it. So it does work. For some reason this experiment stopped working after i played around with it for a few minutes. I dont know if the valve got stuck open or if the magnet stopped working
Couldn't find one of these for Fujitsu eevs so had to make my own, 6 mini neo mags and a bit of conduit did the job, works a treat saved $200!
I have seen some folks do similar with PVC and magnets!
Can I get feed back on how you did such I kinda wanna make one for every brand I see re Michaels sells like a 3 pack of those but yeah 200 bones
@@Lemonpepperclub send me your email and I send a pic
Awesome job!
Thank you for watching!
Great content very informative
Thanks for watching! Stay tuned for more videos to come!
Thank you. Excellent video. I recently had to evacuate and charge my mini split but did not know about this tool. Does the EEV need to be manually opened to ensure a proper evacuation and that the liquid refrigerant finds it's way into the outdoor condenser? Very inspiring video.
Thanks for watching! With a 1to1 minisplit it is not critical to open the EEV manually for evacuation as there is only 1 metering device. Therefore, there is no potential for refrigerant to become trapped.
Can you make a video using the carel eev magnets please
Great video ❤
How much you buy EEVMAG0000?
Have you found a source for the 17.5mm daikin manual magnets
I primarily use the Carel magnet set for all Daikin valves. They are a little loose but have no issue turning the valves closed. Thanks for watching!
Very good video,I have EEV with a larger OD of Around 3/4" what is the PART NUMBER and OD of your magnet?
The Carel set PN is EEVMAG0000
The largest of the magnets is sure to fit
I have tried to cut 2 of those open now with a dremel tool and both time I cut the magnet. What did you use to cut it open?
Copper cutters
@@quentinbutlerhvac5410 Thanks, I tried those last week and it pressed the steel housing inwards and pinched the magnet. New blade and went the slowest I ever had with copper cutters.
Weatherallreps mags work for Daikin valves ?
Thank you for the video, where can we purchase the magnets?
Weatherallreps.com/shop
They are currently out of stock but they will be back in stock soon!
Thanks for the information.
Do you have the links to those magnets?
Weatherallreps.com/shop
They are currently out of stock but they will be back in stock soon!
@@quentinbutlerhvac5410 thank you
You can just take an old eev motor cut the wires off and it will open and close those valves
Hmm.. Not with any valves that I’ve worked with. The EEV motor is essentially just a coil / stator.
Without anything energizing / magnetizing the coil, it doesn’t have the ability to turn the magnet (rotor).
@quentinbutlerhvac5410 i removed an EEV magnet, i also cut out the valve section and tested the magnet by blowing into the valve, rotating the magnet clockwise closed the valve while rotating it anticlockwise opened the valve, confirmed by me blowing into it. So it does work. For some reason this experiment stopped working after i played around with it for a few minutes. I dont know if the valve got stuck open or if the magnet stopped working
Quiero ver. El partido de Toliims hoy
Not familiar with Toliims