Couldnt you use a longer screw on the steering linkage to put it on the top, under the connection to the servo? This could even possibly remove the need of banding the arm for the servo?
*Here is my WPL story* On December 24 2020 I ordered my first C24 Metal Kit version truck for $85 from WPL dot com. And 2 days ago I finally got it in the mail and when I opened it up I found out they sent me the wrong truck. So I emailed them and told them I ordered the C24KM red truck kit and you sent me the C14KM red truck kit instead and I asked if they could send me the C24 red truck body, or a refund? And later that same day they replied back to me and said: “So sorry for that” “Sure. I can offer full refund or send you the correct C24KM Red and you get to keep the C14KM Red.” So told them Yes, send me the correct order C24KM red truck. So now I got two trucks for the price of one. lol!
Front steering linkage looks low I would customize it and lift it up maybe on top of the knuckles then you'd have less of an angle for the servo linkage also. Or you could just bend the lower steering link like you did the upper Servo linkage for more clearance when encountering obstacles just a tip from a fellow rock crawler. keep up the good work 👍
Hey Bro thank you very much for your tip will try this out for sure 😍😁👌🏽 And thank you very much for your kind words much appreciated 🙏🏽 Have a nice weekend 😊 👍🏽
I don't have these axles but the metal ones that look like the stock plastic ones. My steering works fine aswell... When it's standing still. When the car moves it can't turn anymore (the joint is wrong so when you turn to the right the wheel will turn to the right, the car wil move forward, the joint turna 90 degrees and the wheel becomes straight, then it moves forward a bit more, the joint turns another 90 degrees and the wheel is turning right again, etc etc). Glad to see this Axle kit does not have it. Guess I'll need to buy it then as I had already tried 2 other kits and gave up on the wpl...
Hey my Friend you're very welcome 😉 👍🏽 Sorry to hear that because for natural look I like the kit that you have very much 😍👌🏽 Did you changed the shocks also like I did? Because I think that's the problem if you leave the shocks freely in the upper screw it should work without any problem 😉 Have an nice weekend and Stay safe ✌️🏽
Thanks bro 😘 🙌🏽 It's really an fun truck 🦾🏎 Was thinking of that too, but than there's a lot of less free way to go up and down gone I think maybe the upper part relocate to the Fron more will give it a bit more softening 😁🙈 Stay safe bro ✌️🏽 😎
Hey my Friend thank you very much and you're very welcome 😍🙌🏽 Iam planning some upgrades and an build stuff again another motor per two gear box will be awesome 👌😉
Hey my Friend no not right now 😉 It needs to adjust the axles and shocks in some positions it's not good you need to find your sweet spot and secure the best with some light LOCTITE. Hope that helps have a nice weekend 😊 👍🏽
Hi, I bought the same axles but facing problem with pinion rods, the rods are not moving smoothly after fitting screws. Did you face any similar issues? Please guide.
Awesome video making & rc my friend. Your c24 look great with the metal upgrade especiall the new axles look cool. Think the front shock need a bit soft?😁👍🏼👍🏼👍🏼
Hey mate, Yes that could be possible,but that was the only area I had ad this moment and also tryed to have focus on showing that everything works,but to be honest it only now works good with a couple of (mods) adjusting with the wpl c54 canopy on it in me last video from that 😉👍🏽 Have a nice day ✌️🏽 😊
Just ordered my lil crawler, can't wait to upgrade it. Thanks.
You're very welcome my Friend 😊 🙌🏽
Iam happy for you 😍👌🏽 definitely will have a lot of fun.
Stay safe and have an fantastic weekend ✌️🏽 😎 🏄🏽
Couldnt you use a longer screw on the steering linkage to put it on the top, under the connection to the servo? This could even possibly remove the need of banding the arm for the servo?
Hey buddy,
Don't have it in front of me, but sounds good and should be possible what you said 😉👍
*Here is my WPL story*
On December 24 2020 I ordered my first C24 Metal Kit version truck for $85 from WPL dot com.
And 2 days ago I finally got it in the mail and when I opened it up I found out they sent me the wrong truck.
So I emailed them and told them I ordered the C24KM red truck kit and you sent me the C14KM red truck kit instead
and I asked if they could send me the C24 red truck body, or a refund?
And later that same day they replied back to me and said: “So sorry for that”
“Sure. I can offer full refund or send you the correct C24KM Red and you get to keep the C14KM Red.”
So told them Yes, send me the correct order C24KM red truck.
So now I got two trucks for the price of one. lol!
Congrats you lucky one 😂😍👌🏽
Front steering linkage looks low I would customize it and lift it up maybe on top of the knuckles then you'd have less of an angle for the servo linkage also. Or you could just bend the lower steering link like you did the upper Servo linkage for more clearance when encountering obstacles just a tip from a fellow rock crawler. keep up the good work 👍
Hey Bro thank you very much for your tip will try this out for sure 😍😁👌🏽
And thank you very much for your kind words much appreciated 🙏🏽
Have a nice weekend 😊 👍🏽
instaBlaster...
😁👍🏽
I don't have these axles but the metal ones that look like the stock plastic ones. My steering works fine aswell... When it's standing still. When the car moves it can't turn anymore (the joint is wrong so when you turn to the right the wheel will turn to the right, the car wil move forward, the joint turna 90 degrees and the wheel becomes straight, then it moves forward a bit more, the joint turns another 90 degrees and the wheel is turning right again, etc etc). Glad to see this Axle kit does not have it. Guess I'll need to buy it then as I had already tried 2 other kits and gave up on the wpl...
Hey my Friend you're very welcome 😉 👍🏽
Sorry to hear that because for natural look I like the kit that you have very much 😍👌🏽
Did you changed the shocks also like I did?
Because I think that's the problem if you leave the shocks freely in the upper screw it should work without any problem 😉
Have an nice weekend and Stay safe ✌️🏽
Such a nice looking truck bro. 😎 I hope you will come up with a solution to soften the front suspension. I wonder if you can trim the springs. 🤔
Thanks bro 😘 🙌🏽
It's really an fun truck 🦾🏎
Was thinking of that too, but than there's a lot of less free way to go up and down gone I think maybe the upper part relocate to the Fron more will give it a bit more softening 😁🙈
Stay safe bro ✌️🏽 😎
Thank you very much Bro appreciate that 🙌🏽 😍
Stay safe ✌️🏽 😊
Just got mine a couple of days ago. Really like your vids. Do you plan on upgrading to 370 motor? If so; hope you make a tutorial doing it🙏👍👍
Hey my Friend thank you very much and you're very welcome 😍🙌🏽
Iam planning some upgrades and an build stuff again another motor per two gear box will be awesome 👌😉
just about to order all the parts where did you get the colored screws from. I'm going all red so red screws would make my truck perfect
Hey my Friend you can check Banggood's aliexpress and ebay for it did I write in the video Description wich size it is?
Did you upgrade the servo..my stock servo unable to steer properly after i upgrade to full metal
Hey my Friend no not right now 😉
It needs to adjust the axles and shocks in some positions it's not good you need to find your sweet spot and secure the best with some light LOCTITE.
Hope that helps have a nice weekend 😊 👍🏽
@@a-ztube thanks bro 👍👍
You're very welcome bro 😉 🙏🏽
Hi,
I bought the same axles but facing problem with pinion rods, the rods are not moving smoothly after fitting screws. Did you face any similar issues? Please guide.
Hey my Friend,
At auch point they're not moving?
U can check my instagram or Facebook and send me an video if you like 😉👍🏽
Realy good Video. You Are on the right way. Thx and have more fun.
Thank you Bro for your comment appreciate that,you too 😘🙌🏽
Awesome video making & rc my friend. Your c24 look great with the metal upgrade especiall the new axles look cool. Think the front shock need a bit soft?😁👍🏼👍🏼👍🏼
Thanks mate you're very welcome 🥰🙌🏽
Yes for sure it must be much softer,but wee'll get it done I hope 🦾😁
Have a nice weekend stay safe ✌️🏽 😊
@@a-ztube Welcome & have a good weekend too my friend. Look fwd to your next video & stay safe😁👍🏼
To you too man 😁🤜🏽🤛🏻
You already mounted the metal gearbox ???
No my Friend I haven't it right now it'll take some time 😉👍🏽
@@a-ztube ok, i dont wanna mess up another rc car 😖
I believe my Friend 🥴
Is this truck too big to drive around inside your house like on the table or in your living room?
Hey my Friend no its totally Ok for driving inside the house really cool truck 😉👍🏽
when buying the shocks did they come in a 4 pack or 2 pack because i just wanna upgrade my suspension on my c 24-1
Hey my Friend they come in 4 pieces 😉👍🏽
@@a-ztube ok thanks I'm going to put the shocks on mine but everything else on my c24-1 is stock will they work still
Hmmm hard to say that 🙈🤔 I think they're longer so the rods and drive shafts should be to small maybe.
@@a-ztube ok would there be any other shocks that fit
Hey my Friend hard to say
Nice upgraded 🥰👍
THX my Friend 😊 🙌🏽🥰
How about using leaf suspension instead?
Should work very good I think 😉👍🏽
The leaf springs in the B series truck SUCK IN MY opinion too bouncy
Looks good 👍
THX Bro 😍 🙌🏽
Stay safe ✌️🏽 😊
Thanks man and guess what my c14 and parts came in to
You're very welcome my Friend 😊 👍🏽
Nice to hear that wish you mich fun 😉👍🏽
Is that 370 motor single speed or dual speed?
Hey my Friend stock single speed 😉👍🏽
Nice!
Thx buddy 😉🤜🤛
Good Video 👍😊👍
Thank you my Friend you're very welcome 🥰🙌🏽
Thank you very much 😁👍🏽
nice but the test drive looks lenient , more hard core trails ?
Hey mate,
Yes that could be possible,but that was the only area I had ad this moment and also tryed to have focus on showing that everything works,but to be honest it only now works good with a couple of (mods) adjusting with the wpl c54 canopy on it in me last video from that 😉👍🏽
Have a nice day ✌️🏽 😊
front axle is litle wider to rear its that normal??
Hey my Friend you can adjust it like you want with the rods 😉👍🏽
Cool truck
THX Bro glad you like it 😉🙏🏽
@@a-ztube still 180 motor?
Yes my Friend 😊 👍🏽
@@a-ztube thanks for reply my comments bro . I also have wpl c24-1 but not upgraded yet
You're welcome bro anytime 😉🤜🏽🤛🏻
Very nice cars I like them very much 👌🏽 😍
Stark 💪
🦾😘
Tam Katastrophensportler😊😊😊
MashaAllah🤗
Ha ha 😂 😘🥰👌🏽
Make a new hole in a angle for the shock like the rear one
Thanks bro for the advise 😉 🤜🏽🤛🏻
Now adjusted everything and putted on work the wpl c54 body and brackets again everything works fine 👌🏽☺️
try to adjust the wheelbase bro
Hey Bro thanks for the advise 😉🙌🏽 what do you mean exactly?
@@a-ztube the
front and rear wheelbase
just adjust the rear a little bit
THX Bro I'll try 😉
👍 gpod
THX Bro 👌🏽😃👍🏽
⭐⭐⭐⭐⭐
Bester mann 😍😘🥰🙌🏽
Man there is no flex at all
Hey my Friend you're Welcome 😊 👍🏽
It needs some adjustments for sure in the front,but the rear is OK not that bad 🥴
Have a nice weekend
I have noticed since I put my new shocks and metal upgrade suspension parts on mine doesn’t have the “ flex “ I thought it would.
Well to bad I only have $20☹️
You have the wpl c24 my Friend?
Yes sir I have all my tires off and the bed is removed