Thank you! Saved me a trip to a service technician. The end of my throttle cable had actually fallen out of the slot, probably due to it being too loose and never adjusting it. Put it back in and tightened the screw to adjust and back in business :). Appreciate the vid man!
great video.. i could not find anything on any site including stihls sites for the throttle adjustment. Thanks for the great video. Now for another question. Why is it on these new 4mix stihl engines that the compression is low similar to a regular 4 cycle engine. I have three of these pole saws : HT101, and HT131 and they all have about 60 to 70 psi compression. I also just recently found out that these are 4 stroke engines and not two stroke so maybe because of the cam and valves the compression is lower ?? most lawn mower engines i have tested for compression all run about the same at 40 to 60, and most 2 cycle trimmers i test have to have over 90 to operate. Thanks for any input on this subject .
Tried to do this on my FS 56 RCE , but I don’t know where the adjustment screw is. Mine doesn’t have that tension plate, nor the adjusting notch at the carry handle like other stihl models. Great video anyway. 👍
Thanks brother love your work, I just bought a FS/38 second hand it has heaps of power but won’t idle. I’ll adjust the cable tomorrow & that should fix the problem. What do you think 🤔 champ?
If you cant make adjustment there you can look on top of handle where slot is. There is another slot within that one , push it forward to take slack out of cable.
That will help me alot my friend yesterday brought me his and that's one of the thing he said was it wasnt running as fast as it did So i'll give this a try Thank you Bob
@@EliminatorPerformance Thank you. I'm not having much luck. My toys are new. My mower will only start for a few seconds now then dies so I went to the *overpowered brush cutter which is now doing the same. I have so much respect for those who know how to fix these issues But why is it happening when these are Brand New 🤦♀️ Cost me all my savings too 😭😭😭
@@EliminatorPerformance it's more like testing for crankshaft seals and base gasket leaks....just carb kits usually work but if there's a leak it's a waste of time.
That whole cable guide looks completely mickey mouse. I have a stihl trimmer and so far so good, but the plastic cable run thing just seems to flop around in the breeze. Should still work since it's all about the relationship of the ends of the cable and housing, and it won't affect that. But a) it doesn't look very durable and b) I'm not convinced it was designed to be like that. Anyone else noticed this/got any comments? Maybe in fact it's a design feature with an ingenious purpose, but, I don't know...
![[#2024MAMA] BIGBANG (빅뱅) - 뱅뱅뱅 (BANG BANG BANG) + FANTASTIC BABY | Mnet 241123 방송](http://i.ytimg.com/vi/EQsYfiPR9uM/mqdefault.jpg)
![[#2024MAMA] G-DRAGON - 무제(Untitled, 2014)+POWER+HOME SWEET HOME+뱅뱅뱅+FANTASTIC BABY | Mnet 241123 방송](http://i.ytimg.com/vi/Ox29z5Nf1Uk/mqdefault.jpg)
Thank you! Saved me a trip to a service technician. The end of my throttle cable had actually fallen out of the slot, probably due to it being too loose and never adjusting it. Put it back in and tightened the screw to adjust and back in business :). Appreciate the vid man!
Had a customer last week with the same issue. Never the less, great tip for those who didn't know. Thanks for taking time to make these videos for us.
Thanks for watching!
great video.. i could not find anything on any site including stihls sites for the throttle adjustment. Thanks for the great video. Now for another question. Why is it on these new 4mix stihl engines that the compression is low similar to a regular 4 cycle engine. I have three of these pole saws : HT101, and HT131 and they all have about 60 to 70 psi compression. I also just recently found out that these are 4 stroke engines and not two stroke so maybe because of the cam and valves the compression is lower ?? most lawn mower engines i have tested for compression all run about the same at 40 to 60, and most 2 cycle trimmers i test have to have over 90 to operate. Thanks for any input on this subject .
Very good tech tip, never knew that adjustment was there either. Stihl liked the cable adjustment tip the best. Looking forward to more tips.
Thanks for watching!
Good fix!! Never seen that adjustment before! Thanks for all the great videos! 👍👍
Thanks for the video. Really helpful information.
Good day Boy that was interesting, never thought or knew that. Thanks
Thanks for watching!
Tried to do this on my FS 56 RCE , but I don’t know where the adjustment screw is. Mine doesn’t have that tension plate, nor the adjusting notch at the carry handle like other stihl models. Great video anyway. 👍
Thanks brother love your work, I just bought a FS/38 second hand it has heaps of power but won’t idle. I’ll adjust the cable tomorrow & that should fix the problem. What do you think 🤔 champ?
Maybe adjust the idle a bit higher and fine tune the low speed adjuster for air/fuel mix
If you cant make adjustment there you can look on top of handle where slot is. There is another slot within that one , push it forward to take slack out of cable.
Wow, I never knew that adjustment screw
Great Tip...thanks
Thanks for watching!
That will help me alot my friend yesterday brought me his and that's one of the thing he said was it wasnt running as fast as it did So i'll give this a try Thank you Bob
So I want to know. Is it okay to lessen the power? Mine is off the radar way too much for me 😭
Yes absolutely! You can back that screw off and will give less power, as the throttle plate won't open as much. Thanks for watching!
@@EliminatorPerformance Thank you. I'm not having much luck. My toys are new. My mower will only start for a few seconds now then dies so I went to the *overpowered brush cutter which is now doing the same. I have so much respect for those who know how to fix these issues But why is it happening when these are Brand New 🤦♀️ Cost me all my savings too 😭😭😭
Here's my suggestion for a Video.
2 stroke leak test.
Testing for leaky reed valves or head gasket? Hmm I'll have to find one! Thanks for the suggestion!
@@EliminatorPerformance it's more like testing for crankshaft seals and base gasket leaks....just carb kits usually work but if there's a leak it's a waste of time.
great tip!
Run the motor a little richer on mix at full throttle you can hear it lean popping
That whole cable guide looks completely mickey mouse. I have a stihl trimmer and so far so good, but the plastic cable run thing just seems to flop around in the breeze. Should still work since it's all about the relationship of the ends of the cable and housing, and it won't affect that. But a) it doesn't look very durable and b) I'm not convinced it was designed to be like that. Anyone else noticed this/got any comments? Maybe in fact it's a design feature with an ingenious purpose, but, I don't know...
Nice content kya hum friends ban sakte hai please.
🤔More power 😁👍
More is always better!