Would like to see a follow up. I ledt a piece of 3/4 plywood outside for 2 years with some blocks laying on it. It was surprisingly in good shape other than a little swollen
Hey i like it! It works for your needs. Most people can give thier 2cents on what u should have done, but cant supply money to do it like they want. So use it for your projects and enjoy not being in the dust and rocks. Good work.
good video, analysis of time/money, this/that, is, I believe worth a listen, especially for all us folk, locked up in old farm buildings, doing all kinds projects. Also good to hear from folks who don't do projects at all, just critique.
Thank you so much. This is EXACTLY the information and details I need for the upcoming installation of my new 11’ x 18’ metal building. I will be watching this probably a couple more times to make sure I follow your guidelines for the new floor. Even though the shed is enclosed, domI still need to put down a vapor barrier.
Hello Cindy, thank you. You still need the vapor barrier because what that’s doing is keeping moisture from wicking up through the ground from underneath. In my opinion, it would still be best to put a layer of gravel on top of that even if it’s relatively thin. That will allow air flow and drainage if it does get wet from the top. Congratulations and good luck with your new building.
A friend of mine (who has a dirt floor shed) dug down 4inches and put down a bunch of 4ft x 4ft pallets ( he got for free) and then screwed down some sheets of 3/4 plywood.
Thinking of a similar idea for a 64 x 40 shop (2-32 x 40 ft in 2 stages). For your application it looked pretty good. Keep the water out of the OSB and it will last a long time. If you get a chance and this is working out; maybe a good exterior paint over the stain. Might hold up better to the oils and things working on cars, etc. and a lighter color would really brighten things up for working. I have access to crushed concrete and a compactor so thinking of a slab-less floor which would be very similar. Might go with 5/8 OSB for some heavier things; but same principle. You have a very watchable presence, no BS and getting to the point; I watched the whole thing. As soon as I see someone "unboxing" something and a long winded intro I lose interest pretty quick and start scrolling through. You get a thumbs up :)😀
I was thinking about doing something similar. I think I'm going to put down 2" Styrofoam with the foil backing. I'm going to lay down the foam with the backing down. I might install some pex into the foam. To add some radiant heat. Then, I will glue the pressure treated plywood to the foam. I think the foam will hold up from driving on. I guess we'll find out. 😂
D - student Lummox LIKEY! Just spended all my dough on a '67 Jag 420 sedan that's actually nice enough I can't let it sit outside all Winter. I looked up plywood garage floor, and here you are! Gotta see if you have a video on that "garage" thingy you built over it. Where to get one....all that sh!t. I have access to a buncha free sand for a base. Will that work over a barrier? The old-ass early 1800s house I originally grew up in hadda wooden floor in the garage, and that had to have been from the '30s-ish. '70s when we moved. Don't recall anything rotted. I'm a life-ling car guy but never a builder. Maybe the boards in that garage was some kinda fancy cedar??? Lummox not know. But Lummox try!
Thanks Lummox... and that's a rad car. I stay away from sand because it can hold moisture like ...well.. wet sand. The gravel never wicks and it allows a little airflow underneath. In my experience wood that stays wet rots... wood that can dry lives long enough to meet its demise via other methods... termites hurricanes space aliens... but not rot. Check out my other channel, between the sharks garage for all the misery of building that structure. ruclips.net/channel/UCpW-lAvp9z5Gbv4KKtbg8Ww
just found your video. I am using an open carport as a picnic/bbq family sitting area. 18x40 carport. On dusty gravel right now. You think your floors will withstand weekly walking and tale/chair placements. ( no one in family weighs as much as your cars)
hey there... as I understand your goal... if it doesn't double as a garage or shed where you park anything larger than a bicycle. I would put in the little bit of extra work and cash to build a low profile deck/porch/patio. I would frame it with ground contact rated 2x4 and deck it with 5/4 deck boards... It may sound complicated but it is really a task that you and your family could knock out. I would love to do a "ground level" deck video one day but i am sure there are some out there that can steer you right
So how has it been as far as managing the weight of vehicles/tool boxes thus far? Do you still have the one side fully open to the elements or have you closed it off to prevent the weather from getting in? We bought a hoarder house and had to put twice the money into it that was expected so our “shop fund” disappeared and are considering doing something similar to this. We’ve got a bunch of c10s so I’m slightly concerned about weight. Appreciate you taking the time to post this!
Thanks for asking these questions it got be back into it and I am making a follow up video for you...and everyone. Short version is it works very well... but only as well as whats below. The flatter and better the grading below the better. OSB will not compress under the load of a car, but if there is a void below it will sag. But the compression strength is in the thousands of pounds if it is supported...so if you lay it on compacted earth you can drive a bulldozer on it. The shop is still open on one side and the first few feet get his with rain when its windy/storming But it dries out and has not effected it. OSB is rated to get wet... but not stay wet. Clearly sunlight and lots of moisture will make it degrade over time but I have no signs of wear after 6 months. good luck with your projects, feel free to reach out if you have further questions. I am pro C10 myself
I actually got some quotes... They were in the 3-4k range. a 4 inch thick slab this size is about 7.5 cubic yards. in 60 pound premix bags... that 445... if you ordered it it would be about 150 a yard. plus the labor to frame it and spread it... plus mesh and vapor barrier... grading.... it just adds up so far the wood floor is holding up and stays dry
I'm going this route for my 20x25 building. My quotes for the slab are coming in around 10k. The building is only 5k. Can't justify paying more for a slab than a building
for my proposed 20x30 shed, I've been quoted as high at $8500 for a slab. Doing it this way will be under $1800 with all the bells and whistles, and NOT require a permit as a slab would in my area.
@@letsmakeitbetter2828 that's more than I though it would cost It'll be shocking if that holds together for long. I'll be happy if it does (then I might do it ).
Classic cars and wood floor storage. Don’t skimp! Not confident about this. My osb is turning into soil and breaking down quickly. Please think of your cars!❤
Would like to see a follow up. I ledt a piece of 3/4 plywood outside for 2 years with some blocks laying on it. It was surprisingly in good shape other than a little swollen
For the money GREAT OPTION...... I love how people think concrete just grows on trees and pours itself.... LOL
Hey i like it! It works for your needs. Most people can give thier 2cents on what u should have done, but cant supply money to do it like they want. So use it for your projects and enjoy not being in the dust and rocks. Good work.
good video, analysis of time/money, this/that, is, I believe worth a listen, especially for all us folk, locked up in old farm buildings, doing
all kinds projects.
Also good to hear from folks who don't
do projects at all,
just critique.
Thank you so much. This is EXACTLY the information and details I need for the upcoming installation of my new 11’ x 18’ metal building. I will be watching this probably a couple more times to make sure I follow your guidelines for the new floor. Even though the shed is enclosed, domI still need to put down a vapor barrier.
Hello Cindy, thank you. You still need the vapor barrier because what that’s doing is keeping moisture from wicking up through the ground from underneath. In my opinion, it would still be best to put a layer of gravel on top of that even if it’s relatively thin. That will allow air flow and drainage if it does get wet from the top. Congratulations and good luck with your new building.
A friend of mine (who has a dirt floor shed) dug down 4inches and put down a bunch of 4ft x 4ft pallets ( he got for free) and then screwed down some sheets of 3/4 plywood.
Carefeul with the pallets.... the hardwood ones can work great... the pine ones can rot in a jiffy.. but i like the idea
Thinking of a similar idea for a 64 x 40 shop (2-32 x 40 ft in 2 stages). For your application it looked pretty good. Keep the water out of the OSB and it will last a long time. If you get a chance and this is working out; maybe a good exterior paint over the stain. Might hold up better to the oils and things working on cars, etc. and a lighter color would really brighten things up for working. I have access to crushed concrete and a compactor so thinking of a slab-less floor which would be very similar. Might go with 5/8 OSB for some heavier things; but same principle. You have a very watchable presence, no BS and getting to the point; I watched the whole thing. As soon as I see someone "unboxing" something and a long winded intro I lose interest pretty quick and start scrolling through. You get a thumbs up :)😀
what he used is the best exterior pant they carry
latex is trash
I was thinking about doing something similar. I think I'm going to put down 2" Styrofoam with the foil backing. I'm going to lay down the foam with the backing down. I might install some pex into the foam. To add some radiant heat. Then, I will glue the pressure treated plywood to the foam. I think the foam will hold up from driving on. I guess we'll find out. 😂
This is what I want to do with my future 30x30x12 shop
I like your practical approach. Are there any opaque coatings that can be used in order to give the floor a more uniform look?
All the vibes in this video lol love it
thanks dude!
you should have put the dimpled floor under first. That would help protect the wood from water and moisture
Great video thank you
D - student Lummox LIKEY! Just spended all my dough on a '67 Jag 420 sedan that's actually nice enough I can't let it sit outside all Winter.
I looked up plywood garage floor, and here you are! Gotta see if you have a video on that "garage" thingy you built over it. Where to get one....all that sh!t.
I have access to a buncha free sand for a base. Will that work over a barrier?
The old-ass early 1800s house I originally grew up in hadda wooden floor in the garage, and that had to have been from the '30s-ish. '70s when we moved. Don't recall anything rotted.
I'm a life-ling car guy but never a builder. Maybe the boards in that garage was some kinda fancy cedar??? Lummox not know. But Lummox try!
Thanks Lummox... and that's a rad car. I stay away from sand because it can hold moisture like ...well.. wet sand. The gravel never wicks and it allows a little airflow underneath. In my experience wood that stays wet rots... wood that can dry lives long enough to meet its demise via other methods... termites hurricanes space aliens... but not rot. Check out my other channel, between the sharks garage for all the misery of building that structure. ruclips.net/channel/UCpW-lAvp9z5Gbv4KKtbg8Ww
just found your video. I am using an open carport as a picnic/bbq family sitting area. 18x40 carport. On dusty gravel right now. You think your floors will withstand weekly walking and tale/chair placements. ( no one in family weighs as much as your cars)
hey there... as I understand your goal... if it doesn't double as a garage or shed where you park anything larger than a bicycle. I would put in the little bit of extra work and cash to build a low profile deck/porch/patio. I would frame it with ground contact rated 2x4 and deck it with 5/4 deck boards... It may sound complicated but it is really a task that you and your family could knock out. I would love to do a "ground level" deck video one day but i am sure there are some out there that can steer you right
So how has it been as far as managing the weight of vehicles/tool boxes thus far? Do you still have the one side fully open to the elements or have you closed it off to prevent the weather from getting in? We bought a hoarder house and had to put twice the money into it that was expected so our “shop fund” disappeared and are considering doing something similar to this. We’ve got a bunch of c10s so I’m slightly concerned about weight. Appreciate you taking the time to post this!
Thanks for asking these questions it got be back into it and I am making a follow up video for you...and everyone. Short version is it works very well... but only as well as whats below. The flatter and better the grading below the better. OSB will not compress under the load of a car, but if there is a void below it will sag. But the compression strength is in the thousands of pounds if it is supported...so if you lay it on compacted earth you can drive a bulldozer on it. The shop is still open on one side and the first few feet get his with rain when its windy/storming But it dries out and has not effected it. OSB is rated to get wet... but not stay wet. Clearly sunlight and lots of moisture will make it degrade over time but I have no signs of wear after 6 months. good luck with your projects, feel free to reach out if you have further questions. I am pro C10 myself
Is this cheaper than a (as thin as it would be strong enough) slab?
I actually got some quotes... They were in the 3-4k range. a 4 inch thick slab this size is about 7.5 cubic yards. in 60 pound premix bags... that 445... if you ordered it it would be about 150 a yard. plus the labor to frame it and spread it... plus mesh and vapor barrier... grading.... it just adds up so far the wood floor is holding up and stays dry
I'm going this route for my 20x25 building. My quotes for the slab are coming in around 10k. The building is only 5k.
Can't justify paying more for a slab than a building
for my proposed 20x30 shed, I've been quoted as high at $8500 for a slab. Doing it this way will be under $1800 with all the bells and whistles, and NOT require a permit as a slab would in my area.
@@letsmakeitbetter2828 that's more than I though it would cost
It'll be shocking if that holds together for long.
I'll be happy if it does (then I might do it ).
What is the name of the flywood that ur using?
It will work for a while.
How is it using a jack on the wood?
its fine it even rolls really well. the osb has a substantial psi rating
@@letsmakeitbetter2828what about a car on jack stands ?could it handle it ?
Put down a vapor stop plastic sheeting wafer board fall apart
The bottom will rot first.
🙌Home improvement for C students!!!😂
Yea man! Glad someone caught that lol
Advantech would have lasted ten more years.
Classic cars and wood floor storage. Don’t skimp! Not confident about this. My osb is turning into soil and breaking down quickly. Please think of your cars!❤
Thank you very much for the concerns. But so far Mine is holding up. I need to do a follow up video on it
@@letsmakeitbetter2828 do it. I'll watch it.
I kinda think its a decent idea.... GOOD JOB