Just subscribed to your channel. I'm gunna go through some videos later. Nice work man. I think I remember seeing you post in a local Facebook page. Are you in Ontario?
@@musthavewheels Yeah brother I'm in Markham. Thats my group you posted on Toronto RC Speed Runners. Me and Notorious J are in the same area. My Slash 4x4 speed run car is the Yellow one.
I need an install video for a mamba x 8s for my Infraction v2. I can't find one anywhere. Looking for a full install from stock to the new 8s systems mentioned please.
@SoulSenseiMusic I don't have much experience with tp, but going by the kv rating, it's probably not going to like constant throttle and load for long periods. I probably would have went with a lower kv. But a mmx8s should do the trick. If you want to be extra safe, an xlx2 will definitely be enough to handle that.
@SoulSenseiMusic I'm more worried about the motor than the esc. Gear it conservatively because this is a higher kv motor for this size if car. Keep an eye on motor/esc temps and take it from there. Your probably going to want to run fans on the motor
@@SoulSenseiMusic I believe the stock is a 16t. I would start there. It will already be faster than stock because of the higher rpm of that tp motor. You may even need to gear down.
OK I'm a speed runner and builder first you need morespace and you gotta get a controller you mod to go farther when you do speed runs. I recommend a futaba,spectrum or flysky transmitter or get you a 2.4g radio signal booster amplifier or just get you a radiolink transmitter and receiver guarantee you'll up your personal best
How did you come to this conclusion ? Open roadway with no sidewalks, almost no traffic and the danger comes from ? Genuinely trying to understand your train of thought here.
Thanks for the reply… I’ve found 25/46 a good balance for drag/ light bashing with low temps using the 2200kv ..
Beautiful run!
Going faster next time, can’t wait to see it
Nice run brother! 😃
Thanks dude! This is just the tip of the ice berg 👍🏻
@@musthavewheels Awesome! Looking forward to more brother.
Just subscribed to your channel. I'm gunna go through some videos later. Nice work man. I think I remember seeing you post in a local Facebook page. Are you in Ontario?
@@musthavewheels Yeah brother I'm in Markham. Thats my group you posted on Toronto RC Speed Runners. Me and Notorious J are in the same area. My Slash 4x4 speed run car is the Yellow one.
@@KaizerTest nice dude. Once we're "aloud" to go outside again, maybe we'll do some speed run things with notoj
Very fast for its first run . 💨💨
I need an install video for a mamba x 8s for my Infraction v2. I can't find one anywhere. Looking for a full install from stock to the new 8s systems mentioned please.
What timing are you running.. good job!
Thanks brother. I haven't touched the timing at all. I actually retired from speed runs for now. It's too hard to find a good road in my area.
Hello.
I have a tp 4050-SCM 3190kv (8s)
Driving a felony on 8s.
What esc do I need?
would a mmx8s work?
I'm only drifting and want to do burnouts.
@SoulSenseiMusic I don't have much experience with tp, but going by the kv rating, it's probably not going to like constant throttle and load for long periods. I probably would have went with a lower kv. But a mmx8s should do the trick. If you want to be extra safe, an xlx2 will definitely be enough to handle that.
So as long as I don't go full throttle all the time it should be ok with mmx8s?
@SoulSenseiMusic I'm more worried about the motor than the esc. Gear it conservatively because this is a higher kv motor for this size if car. Keep an eye on motor/esc temps and take it from there. Your probably going to want to run fans on the motor
@musthavewheels I would start with 21t or is that to high for just drifting?
I have 2 fans and cooling fins.
@@SoulSenseiMusic I believe the stock is a 16t. I would start there. It will already be faster than stock because of the higher rpm of that tp motor. You may even need to gear down.
with the stock Pinion is this combo good for Bashing?
and what fan mount you have use?
100% bashable with stock gearing. i buy cheap fan mounts from amazon or aliexpress and put decent brushless fans on them
Nice pass.did you use two 3s for the 6s run?
Yeah 2 3s packs
is that a 1515 castle motor?
1515 2200kv
what size pinion
Full specs are in the description
@@musthavewheels also could you run the mmx8 with any motor for instanajce a hobbywing 4274 220k motor without any problems?
@@ikonic189 yes that will work. I think you meant 2200kv? If so it's not a problem.
@@musthavewheels yes that what i meant thx
OK I'm a speed runner and builder first you need morespace and you gotta get a controller you mod to go farther when you do speed runs. I recommend a futaba,spectrum or flysky transmitter or get you a 2.4g radio signal booster amplifier or just get you a radiolink transmitter and receiver guarantee you'll up your personal best
My 2200kv 1515 gets 89mph with a mm6 on 4s with Typhon
your putting people's life in jeopardy you couldn't find beter place to run
Karen?! Is that you?!
How did you come to this conclusion ? Open roadway with no sidewalks, almost no traffic and the danger comes from ? Genuinely trying to understand your train of thought here.