Phillip, you are da man! I take it back you are the Boss your new nickname is The Boss! You are the fastest to me... the hobby really appreciate you nice run! I have to let my pockets grow just a little more and I’m putting the castle system in my V2 I know I wont reach you speeds or even get close, but I love chasing you Thanks for what you do Boss lol.
Holy Crap Dude. That thing is frigg'n moving. I've got one on order, be here the 11th. Can't wait to get ripping on it. Great video, had me laughing like crazy just to see that thing buzz by you that quick. Dannnng !!!!
The CC electronics woke it up on 8s 💪 👊 Very fast considering rest of the truck is stock. I'm guessing diffs stock etc... too. Can't wait for the next one fella. 👍
@@philipjolley1015 I smoked the stock motor and esc with a 25t pinion...I have a 4070cm TP motor 1520 castle 1650kv And the big nasty....1721 2400kv castle 😆 🤣
Cool run that's really fast for an Infraction, Is that the 1,650KV 1717 combo on 8s? If it's that i'm impressed i plan to put that system in my XO-1 and maybe my future Infraction V2 or Limitless V2. I'm not sure which i want the Infraction V2 or Limitless V2, Which one would you get if had to buy another one?
@@philipjolley1015 I might just get the Infraction since i could get into it for cheaper. And cool it was the 1650KV i plan to put it in my XO-1 and my future Infraction V2. Thanks and I hope you have a merry Christmas.
Awesome run Man! You think that 1717 1650 Kv motor is a good option for my speed run build on a erevo 2.0 trying to go 100? I have a another TP coming for it but I want to try a sensored motor
@@philipjolley1015 I see, well I actually got the traxxas 4 cell 50C batteries to barely fit in the erevo 2.0 trays after peeling the casing and metal Plates off so I’m able to run 8S! Still a good option motor for going 100+?
@@ctbcrf50 no spectrum aren't good. You would need proven speed run batteries. I used 3s 70c turnigy graphene panther. Chinahobbyline.com is your best bet. Just find one that fits.
I like the numbers from the 1717 combo. I have the same system, but haven't dropped it into anything yet. How would you compare it to the Spektrum 8S system? As usual, you not only share great videos, you put top shelf components through the paces. Heart felt thank you.
Thanks brother, in my opinion there is no replacement for castle creations esc for speed. All other esc will cut power. I'm not familiar with the motor, but this 1717 is a beast. Stay tuned for more.
Nice. I have that system installed on a Mojave EXB that I bought used. I'm going to see how much speed I get out of that system on 8s off road with a 20t pinion. Hehe.
Hey bud what size gears should I run on the same setup ? You don’t have to give me your gearing just please point me in the right direction. Thank you as always
@@philipjolley1015 I have that in my limitless and something isn’t right. The motor is too fat and the gears too small. I can only get one motor mount screw in .
@@philipjolley1015 I don’t get it . That’s what I thought. I have the pps mount . I’m going to see if that works. If not I bought a spool with a 40 tooth spur that I’ll try . I’m going to put the 30 pinion with the 34 spool to see if it works. I’m waiting on my second limitless to get here . I’m going try the castle creations 2028 - 1100 kv motor and see what happens. But thank you.
@@philipjolley1015 I got the hsp flying fish its basically a rebranded redcat lightning, I do have some trouble on how im changing its spur and pinion into mod 1 gears
that was a really good pass, so how does the mamba monster x 8s do on 8s? is it pushing the esc? or does it handle it well? and what sorts of amps did you manage to pull that run if you can remember?
Like #1 i knew it wouldn’t be long before a 100+ pass... good stuff brother 💪🏾💯
Yes sir. Thanks brother
@@philipjolley1015 incredible speed bro. what KV is that 1717 bro.
subbed +liked
@@1521joe thanks 1650kv
I really enjoy your builds and video. Thank you. Any chance you’ll share the kv of that 1717?
@@marksmola7299 thanks, yes 1650kv.
Woooooooooweeeeee. Get it, Phillip! That bad boy was moving!!!
Thanks man, I believe the new diffs and bearing support is working..
@@philipjolley1015 Keep up the good work, sir! I'll keep watching!
Way to set the pace Phil... As always a great run. Keep pushing her as I know you will !!!!
Thanks brother. I appreciate it
DAMN 👀. First pass and hauling ass 😱. Killer run Brother. What a beautiful truck too. 🍻😎💪👊👊
Thanks brother, Arrma is killing all other brands with all the new trucks. Loving it
Phillip, you are da man! I take it back you are the Boss your new nickname is The Boss! You are the fastest to me... the hobby really appreciate you nice run! I have to let my pockets grow just a little more and I’m putting the castle system in my V2 I know I wont reach you speeds or even get close, but I love chasing you Thanks for what you do Boss lol.
thanks, you can get there. Just lmk if you need help.
Nice pass philip, i recently sold mine to a buddy, speed runs are fun, but now im now more into the offroad dirt side of things
Yeah I hear ya. I can't seem to get away from them myself. Thanks brother
Holy Crap Dude. That thing is frigg'n moving. I've got one on order, be here the 11th. Can't wait to get ripping on it. Great video, had me laughing like crazy just to see that thing buzz by you that quick. Dannnng !!!!
Thanks man, when you get it if you need any help just ask.
Philip Jolley Hey I really appreciate that. Thank you!!!
@@skybasherrc2372 what we are he for(experience guys,I try and promote the hobby)
Awesome truck, she really moves. I got to get one of these when they come out here.
Keep up the great work brother.
Thanks man, I'm really liking it. Looks amazing. I plan to gear up and go for more.
Love this truck bro and u just made it the best like all the time I love it bud
Thanks brother
Sweet freakin truck my friend that thing was movin for sure 126mph wow!!!! very well done happy bashing my brotha👍👍🤙😎😜😛🤪👊✌
Thanks brother, just the beginning..
Great pass bud keeps me motivated just went 84 mph with my Wltoys 104002 on 3 s coasted after both drive shafts broke
Thanks brother. Wow that's crazy..
@@philipjolley1015 thanks bud my wife and I watch your channel have a lot of respect for so I appreciate the compliment
Love your videos. Always get straight to the point
Always try to. Thanks man.
Love the new truck. Awesome pass to brother can’t wait to see what you get outta her. #Teamripplekiller.
Thanks brother, gonna swap out hoons for grp then gear up.
Philip Jolley awesome cant wait to see it rip. And that steering servo too. Good luck brother
@@kevinrc.marino2068 got a savox on the way.
Awesome video impressive pass good numbers too great job thumbs up 👍
Thanks brother..
Very nice run 🏃♂️ I love that sound
Thanks man, I always loved that sound .
Smoke in the street mi brother Philip nice pass lihthing 💪🚀
thanks brother. keep watching. I plan on more.
Love that ROCKET SOUND
Me too. That woosh sound is my favorite part. Thanks man.
Whewwww she quiet and fast.. nice pass scary💪🏽💯
Thanks brother, just getting started. Defore coming.
That bad boy is moving brother 🚀
Thanks brother.
great pass bro. got it rolling! keep pushing
Thanks brother plan to. Hope all goes well.
Amazing pass brother. Awesome sound
Thanks brother, I'm happy with how it's going so far.
Great pass brother, Team Ripple Killer
Thanks brother, you need to get your out of the box! #teamripplekiller
Nice pass it was moving my favorite truck
Thanks man, I appreciate it. The truck look great.
Speed king 💯✊🏽 RcFam4Life 👁👁
Thanks brother.
Killer pass with the V2 Infraction Philip
Thanks brother
The CC electronics woke it up on 8s 💪 👊 Very fast considering rest of the truck is stock. I'm guessing diffs stock etc... too. Can't wait for the next one fella. 👍
Thanks man, yes I just added electronics and spool. Diffs are stock and rest of truck.
@@philipjolley1015 what spool size and gearing were you running?
@@MrWarrior2002 limitless spool, gearing was mild. 27/34 I think.
Hey great run ... I've Just gotten the infraction 6s, doing a 8s build 1100kv kv 8s esc looking to hit 130mph what gearing should I run . Thanks
Thanks. On a v2 infraction with good lipos a 29t spur, and a 44t pinion should get you close. Then work up from there .
Always pushing the envelope , brother 💪🏾 💪🏾 💪🏾 💪🏾
Thanks brother, always trying.
Nice run Phil , gotta get me that combo one of these days
Thanks brother, really is a strong combo.
Very nice run brother. 💯👍🏾
Thanks brother.
I just put the same esc/motor in a limitless. Did you end up putting cap pack on or did it not need it at that speed? Thanks and great video
Great setup. I would add a cap pack to a mmx8s for sure as they can reach high Ripple without.
Absolute speed king
thanks brother. working up.
Awesome great pass
Thanks brother, I appreciate it.
As always, great video, great run. What transmitter and receiver are you using in this video? Thank you
thanks brother, futaba 3pm and a 603fs reciever old setup but radio works .
Thank you brother
Very awesome on a stock body...I am also pushing the limits on the stock body
Thanks man.
@@philipjolley1015 I smoked the stock motor and esc with a 25t pinion...I have a
4070cm TP motor
1520 castle 1650kv
And the big nasty....1721 2400kv castle 😆 🤣
@@SpeedyBrute3 I love the 1721 really shines on low cells.
@@philipjolley1015 yes sir
That hauls! Does the 1717 motor drop in with no modifications?
Yes mounts right where the stock motor goes. Thanks.
What servo would you replace the stock one with ? Great run, I really like the Nfraction. Thanks for the video
Thanks, I like the savox 1258tg
@@philipjolley1015 thanks Phil. I appreciate you. God bless brother
this is the truck of the previous video? wow so little change and it's flying, super nice :D let's see on the next run
Yes same truck, just a new combo and gearing.
Would this be a good setup for no prep and prep drag racing? May be a dumb question but I just started the hobby
Yeah I think so, I don't drag but a very flexible setup. May take some tuning.
@@philipjolley1015 thanks brother
Top notch brother!👍🏼
thanks brother.
Cool run that's really fast for an Infraction, Is that the 1,650KV 1717 combo on 8s? If it's that i'm impressed i plan to put that system in my XO-1 and maybe my future Infraction V2 or Limitless V2. I'm not sure which i want the Infraction V2 or Limitless V2, Which one would you get if had to buy another one?
Thanks, yes it was the 1650kv. If it was me I'd do the infraction. Can always change it to a gt car body later.
@@philipjolley1015 I might just get the Infraction since i could get into it for cheaper. And cool it was the 1650KV i plan to put it in my XO-1 and my future Infraction V2. Thanks and I hope you have a merry Christmas.
Very Nice👌🏼🤘🏽 what kind of futaba are u running Philip I’ve been wanting to change my transmitter As well
Thanks man, this is a old futaba 3pm. I've prob had it over 10 years.
Did you use a spool of the center diff?? Just wondering??
Spool
Awesome run Man! You think that 1717 1650 Kv motor is a good option for my speed run build on a erevo 2.0 trying to go 100? I have a another TP coming for it but I want to try a sensored motor
Thanks, the only problem I see is to me the 1650 is a 8s motor. Would be hard to find quality lipos that will work in the erevo battery trays.
@@philipjolley1015 I see, well I actually got the traxxas 4 cell 50C batteries to barely fit in the erevo 2.0 trays after peeling the casing and metal
Plates off so I’m able to run 8S! Still a good option motor for going 100+?
@@ctbcrf50 the traxxas batteries will be very weak.
@@philipjolley1015 what batteries do you think will be my best bet spectrum? I would need to get a new charger also as I have all batteries traxxas
@@ctbcrf50 no spectrum aren't good. You would need proven speed run batteries. I used 3s 70c turnigy graphene panther. Chinahobbyline.com is your best bet. Just find one that fits.
U should do a video explaining the cap packs. Size. Install, ..reason for.. the good and bad..
I can, but really they are to filter ripple current.
What Heat sink is that your using? Can't find one anywhere for that motor.
Wasn't running one. Just had fan mounted to center brace mounted above motor.
@@philipjolley1015 Thanks that helps.
I like the numbers from the 1717 combo. I have the same system, but haven't dropped it into anything yet. How would you compare it to the Spektrum 8S system? As usual, you not only share great videos, you put top shelf components through the paces. Heart felt thank you.
Thanks brother, in my opinion there is no replacement for castle creations esc for speed. All other esc will cut power. I'm not familiar with the motor, but this 1717 is a beast. Stay tuned for more.
Got a 1717 1260kv will it fit with problems
Yes a 1717 will fit. I ran a 1650.
Is the 1260kv a good choice? Xause I have the same thing.
@@peterfilingeri477 1650 its a little faster on the box says 1260 runs a little hotter but with right gearing and fans you'll have some fun
Nice. I have that system installed on a Mojave EXB that I bought used. I'm going to see how much speed I get out of that system on 8s off road with a 20t pinion. Hehe.
I have the same in my mojave exb now on 6s is still plenty fast. On8s I hope you have belted tires.
@@philipjolley1015 I tried it for a little while with the stock tires on pavement, but yes, I did buy 2.8 MT belted tires for it for running off road.
Did you test the range on the new RTR Remote ? Im going to test it in the weeekend 🥳
I didnt do an actual test but I had pretty good range with it.
Hi what was the gear racio
27/34
Thank you thats fast with room to go taller
What connector is that too power fan off balance port
Jst-xh male plug. Can get them off of Amazon
Good pass brother 8s is a monster infraction is moving
Thanks brother, hopefully just getting started. Gonna change tires and gearing then push for more.
Philip Jolley yes sir get it brother
Nice pass on hoons bro
Thanks brother, about as fast as I want to push the white ones.
Nice pass big dog
Thanks brother..
Cool first run
Thanks brother, always looking for more..
Nice run 👍👍👍
Thanks man for watching. Stay tuned as I plan to push it if parts come in.
Nice run 👍🏁
Thanks man .
That's sweet brother ! I had to laugh I'll hide behind the jeep 🤣🤣 I know how it is being hit by a rc I don't blame you !😉
Thanks brother, yeah it wasn't pleasant. Males me nervous running a infraction again. I crack myself up too.
That motor/esc combo seems smooth and efficient how are you liking it in the infraction?
It definitely is, I like it so far. First pass,I need to connect the sensor cable now and add a cap pack.
The Infraction seems to go faster with that combo than the Limitless on 8s, at least in videos I've seen. Different gearing? Great run
Thanks, I never tried in a Limitless.
@@philipjolley1015 LOL.... you're one of the limitless kings
Infraction v2 has 2.8 diff gears v1 and limitless in the 3.30 i believe so geared higher
Good pass brotha!
thanks my man..
Nice pass sir, she was moving
Thanks man, it's doing pretty well for a body like a box. But looks cool.
Philip Jolley yes it does, keep pushing bruh.
Wow what gears ⚙️ are you running?? Love your content
thanks, 27/34
Hey bud what size gears should I run on the same setup ? You don’t have to give me your gearing just please point me in the right direction. Thank you as always
I would start at 27/34 on 8s
@@philipjolley1015 I have that in my limitless and something isn’t right. The motor is too fat and the gears too small. I can only get one motor mount screw in .
@@chriswade3986 it should fit no problem. Tons of people run that setup.
@@philipjolley1015 I don’t get it . That’s what I thought. I have the pps mount . I’m going to see if that works. If not I bought a spool with a 40 tooth spur that I’ll try . I’m going to put the 30 pinion with the 34 spool to see if it works. I’m waiting on my second limitless to get here . I’m going try the castle creations 2028 - 1100 kv motor and see what happens. But thank you.
Telling you I see you hitting 150 soon 👀🍿
Can only hope. Thanks brother
What’s your gear pinion and spur teeth count?
27p/34 spur.
Nice pass brother🔥🔥 I bought my first rc car I might do speed runs too soon
Thanks brother, Awesome what did you get? Lmk if you need any help.
@@philipjolley1015 I got the hsp flying fish its basically a rebranded redcat lightning, I do have some trouble on how im changing its spur and pinion into mod 1 gears
@@huskedworkz1766 I'll have to look at it.
What gearing did u use on this car to achieve 126mph
27p/34 spur
@@philipjolley1015 thank you 💯
what are yuo gear at 0n pinion and spur sir?
i want to say 30/34
So quite. Nice pass.
Thanks brother. Yes must be the v2 upgrades.
Hell yea. I gotta get out and do some speedruns myself
Had a long weekend so had to get out. Thanks brother.
Like #3
Thanks brother.
What kv is the motor ? 1717 ? 1260 or the 1650 ?
1650
Alright! Good pass
Thanks my brother.. I'm just getting started. May do some runs with gopro soon.
Mine I put Arrma kraton mmx 6s it strong 💪 wow 😯
Awesome, as long as you enjoy it is what the hobby is about.
nice run my dude 😎
Thanks brother.
What pinion/gear used?
27/34
nice pass
Thanks brother..
What gearing u run
Nice pass the diff feel smother to me for some reason on the V2 🤔🤔
Thanks brother, definitely a smooth running truck.
How does it run on 6S with this combo?
Not sure I ever ran it on 6s. Prob still run 110
Is the Castle setup the 1650kv or the 800kv setup
1650kv
What gearing are you running?
27/34
that was a really good pass, so how does the mamba monster x 8s do on 8s? is it pushing the esc? or does it handle it well? and what sorts of amps did you manage to pull that run if you can remember?
it handles 8s pretty well, thanks was just the first pass. I think it was around 300a or 325a.
What pinion?
27t and thanks for watching.
💯💪👍🔥
Thanks brother
It fast bro
Thanks man.
@@philipjolley1015 your welcome
Time for a sub...
Thanks man. I appreciate it.
H O L Y 🐮🐄😱😱🐄🐮
Thanks man.