Screenshot every step in this video. Give or take a few, I came up with 68 steps. That's a TON. Doesn't give me much incentive to use the sprayer if I've got to work my way through all of these cleaning steps. WOWSERS!
He makes it much more complicated than it is. Just flush it with water until it's clean then add anti-freeze and save yourself a few bucks. Pump Armor is a scam.
I think you're overcomplicating things. You dont need any screenshots. Simply flush out your sprayer with the hose attachment and let it suck up some primer fluid when you're done.
Is there any reason to not just connect the water source to the power flush adaptor and run water through the sprayer with the sprayer turned off? instead of on/ off cycles repeatedly.
I know my grace magnum x5 works as I cleaned it well. I know I have a clogs in the hose. Is there a way to clear the clog besides from the water rinse, reverse spray then normal spray. Any advice will be greatly appreciated. Steven
all the comments here are valid concerns and no response from the channel or Graco is bad business. and the video is incomplete without the steps showing dissembling the gun and cleaning it and the filter inside the gun handle.
@@jessehall4528that’s true. Even painting an entire house would require a roller for at some point ..I feel like depending on the texture you can get better finishes
When your previous step says to turn the sprayer off and then you give next steps… and say turn the sprayer off. Maybe you should explain when to turn it back on, I mean what’s one or two more steps out of 300?????
Depends on the job. I just stained 75' of fencing both sides in about an hour included cleanup. I'll take the sprayer everyday for that. Smaller job, may not be worth it.
Screenshot every step in this video. Give or take a few, I came up with 68 steps. That's a TON. Doesn't give me much incentive to use the sprayer if I've got to work my way through all of these cleaning steps. WOWSERS!
You need one person to paint and another person to clean! A lot of steps for sure! I don’t use mine because of this…
He makes it much more complicated than it is. Just flush it with water until it's clean then add anti-freeze and save yourself a few bucks. Pump Armor is a scam.
I think you're overcomplicating things. You dont need any screenshots. Simply flush out your sprayer with the hose attachment and let it suck up some primer fluid when you're done.
@@lowellabraham6966 im kind of on the fence about sprayers, is it really a pain in the ass to clean and maintain? seems like sooooo much work...
If this is too much for you then you dont need a sprayer in the first place.
How are you using two hands to turn off the power wash adapter and then telling us to release the trigger. Who's holding the trigger?
Is there any reason to not just connect the water source to the power flush adaptor and run water through the sprayer with the sprayer turned off? instead of on/ off cycles repeatedly.
Is this cleanup process the same whether you use oil or water based paint? Or would you switch out the water with paint thinner if you use oil-based?
I know my grace magnum x5 works as I cleaned it well. I know I have a clogs in the hose. Is there a way to clear the clog besides from the water rinse, reverse spray then normal spray. Any advice will be greatly appreciated. Steven
My brain hurts watching this video, it's not a loaded gun!
Why does the pressure relief step require grounding?
I feel like I don't have enough hands for this 😅
all the comments here are valid concerns and no response from the channel or Graco is bad business. and the video is incomplete without the steps showing dissembling the gun and cleaning it and the filter inside the gun handle.
I've set up and primed heart/ lung bypass machines. This is more complicated than that.
Thanks, this is so much easier than reading a manual!
can i just return it to the store? This is insane clean up. I should have just used brushes.
Returning my new sprayer tomorrow.
Seriously breaking out the paint roller does not seem so bad now
@@MrThe1234guy haha real talk
As long as you’re not painting an entire house, you’re better off with a roller anyways
😂😂...
@@jessehall4528that’s true. Even painting an entire house would require a roller for at some point ..I feel like depending on the texture you can get better finishes
show how to remove filters?
When your previous step says to turn the sprayer off and then you give next steps… and say turn the sprayer off. Maybe you should explain when to turn it back on, I mean what’s one or two more steps out of 300?????
Great job, thank you Sir.
👍👍
Is this a joke? How does this guy keep a straight face?
Is this guy a rocket surgeon?
This is like a pollock joke 😂
Thank you for showing me not to buy a hundred steps cleaning system!
Literally takes a couple of minutes after you've done it a couple of times.
He's just going slow and thorough for educational purposes
good lord I would have been done rolling by the time it takes for this
Depends on the job.
I just stained 75' of fencing both sides in about an hour included cleanup.
I'll take the sprayer everyday for that.
Smaller job, may not be worth it.
jesus christ. if this all is required to only clean it. I can only image what is like to use it hahaha. I am all in. Lets go Graco users!
Ok, I need 7 hands. Got it.
I am not sure how helpful this is. This video runs to quickly with to many steps and not enough pause.
These videos by Graco are hard to watch.
jesus sprayer machines are such a pain in the ass to clean
Geez need a degree to clean it
New challenge 😅 Fastest Time ⏲️!
This is a lot. There’s gotta be an easier way
Old videos 10/10 new videos 4/10
Are these people serious with this video? Who the heck can follow along with this?
😂😂
Wtf... 😳🤣😂
😢😢😢🎉😢y50
way way to many steps
Man in the future if you ever do anymore videos try to edit out the swallow and smack sound 🤦🏽♂️