I solved it, the back end has a little loop you can pop something in to lever it off. Just make sure to cover it as it can ping off and is a nightmare to find in your engine bay.
Hi got a 2014 Ford transit with the fault code p0299 turbo underboost, has had a new turbo and I’ve done all the reset of the learned values but it still keeps putting it into limp mode any ideas 🤷♂️
Does this same engine as ford tourneo custom 2014? Think i need to do this. Vans in garage but seems straight forward. Can you clear the fault code by disconnecting battery instead or code reader? Is relearning the turbo required as i dont have this device? Thanks
Sir if i change by my self i have to reconfigure with board computer ? or i can use this as plug and play ?
Is the relearn absolutely critical? Swapped my actuator out 400 miles ago and it seems happy so far
As said above is a relearn on the actuator necessary.
As my gears are broken like in video
Hello, have you got any tips to easily remove the horseshoe clip on the actuator arm? Everything I try just spins it around.
I solved it, the back end has a little loop you can pop something in to lever it off. Just make sure to cover it as it can ping off and is a nightmare to find in your engine bay.
nice
Hi got a 2014 Ford transit with the fault code p0299 turbo underboost, has had a new turbo and I’ve done all the reset of the learned values but it still keeps putting it into limp mode any ideas 🤷♂️
I've got the same thing now mate! Did you figure out what the issue was? Any info is much appreciated, thx
Does this same engine as ford tourneo custom 2014?
Think i need to do this. Vans in garage but seems straight forward.
Can you clear the fault code by disconnecting battery instead or code reader?
Is relearning the turbo required as i dont have this device?
Thanks
Hi mate have you ever came across the transit 2.2 rwd 2012 or have any videos on how to remove the turbo actuator
Ford in Ireland won't sell it separately have to buy new turbo is it the same in the uk
Yes. You can get them on ebay
Hi , when ever you change air flow and map sensor do you have to do a re learn procedure or can you just drive the van without a re learn .
I change turbo egr almost all the valves and nothing i have again p2598 problem
Hi, when you say do a relearn on the turbo, what do I need to do that please? Thanks!
You need a suitable diagnostic tool👍
How long should this take to change, and approximately how much am I looking at in the UK?