Hi Scott, I used a 250 watt skateboard hub motor . Top speed 25 kph but best bit no wires it's Bluetooth. : ) Range unknown, have done 10 kilometres and down to about half charge.
I need help, when I accelerate, the engine is making small jerks, and the bike doesn't move, it just moves after being in motion, I'm using a 6384 motor with a 15-tooth pinion reduction with a 60-tooth gear, connected to a shaft , this one has an 11-tooth pinion and a 54-tooth crown, 48v battery, thumb throttle, vesc 75100
Hey Scott, Working on same exact project, You are the only video I have found ebike throttle to Vesc made in 2021 (even Kepler's videos are 2017 old and the Vesc Tool firmware has changed) Anyway to convince you to post of video of the Vesc Tool Setup? Thank you!!
Badass dude. Getting into diy ebike stuff now and the vesc controllers seem cheaper and smaller/better than most ebike controllers. You still messing with vesc based ebike builds? Looks like the only part that takes some modding is the pas, are there decent 40-80a cheap vescs with good pas?
I'm not sure what you mean by pas. I definitely think VESC controllers are a good option as long as you keep them cool. Some of the flipsky options have pretty good heatsinks now it seems. I definitely recommend getting the Bluetooth dongle for adjusting settings and monitoring temps.
@@scottjoyce85 sorry pas = pedal assist [sensor], and I was trying ask if you had become aware of any vesc's with easier integration of pedal assist in the years since this video was made. I'm struggling to find clear videos on the subject but there may be plenty on endless sphere that I haven't found yet
Oh shoot. Sorry. I might try to do a better video on this. I'll need to load up the vesc software because I don't remember all the instructions off hand anyway.
@@supmission meh, it's just like any other powered machine. Take your finger or foot off the throttle and the power stops. You just have to take your finger off the lever and it cuts power.
![Felix "Unfair" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/Oswujxm2Ag0/mqdefault.jpg)
Very neat and discrete throttle. Thanks for sharing.
Hi Scott, I used a 250 watt skateboard hub motor . Top speed 25 kph but best bit no wires it's Bluetooth. : )
Range unknown, have done 10 kilometres and down to about half charge.
I need help, when I accelerate, the engine is making small jerks, and the bike doesn't move, it just moves after being in motion, I'm using a 6384 motor with a 15-tooth pinion reduction with a 60-tooth gear, connected to a shaft , this one has an 11-tooth pinion and a 54-tooth crown, 48v battery, thumb throttle, vesc 75100
Hiya buddy can u make step by step tutorial please of course if you have time watching from uk
I was looking for a hidden throttle idea, but this is too pro...
Hey Scott, Working on same exact project, You are the only video I have found ebike throttle to Vesc made in 2021 (even Kepler's videos are 2017 old and the Vesc Tool firmware has changed)
Anyway to convince you to post of video of the Vesc Tool Setup? Thank you!!
Yes. Sorry. I'll do one here shortly if you haven't already figured it out.
Badass dude. Getting into diy ebike stuff now and the vesc controllers seem cheaper and smaller/better than most ebike controllers. You still messing with vesc based ebike builds? Looks like the only part that takes some modding is the pas, are there decent 40-80a cheap vescs with good pas?
I'm not sure what you mean by pas. I definitely think VESC controllers are a good option as long as you keep them cool. Some of the flipsky options have pretty good heatsinks now it seems. I definitely recommend getting the Bluetooth dongle for adjusting settings and monitoring temps.
@@scottjoyce85 sorry pas = pedal assist [sensor], and I was trying ask if you had become aware of any vesc's with easier integration of pedal assist in the years since this video was made. I'm struggling to find clear videos on the subject but there may be plenty on endless sphere that I haven't found yet
Hi , I have the 75100.vesc and wad hoping you could help how would you wire the brake lights would u wire them to adc2 with the sensor
Hey Scott, can you tell us how you configure in VESC Tool your throttle ? And what pin do you connect on the VESC ? Thanks
Oh shoot. Sorry. I might try to do a better video on this. I'll need to load up the vesc software because I don't remember all the instructions off hand anyway.
@@scottjoyce85 yes please scott if you could make a tutorial step by step would appreciate that of course if you had time buddy
Does power cut off when you press either brakes?
No, only when you let off the throttle.
@@scottjoyce85 Maybe next step is to uncouple throttle power when either brakes are pressed.. Safety for rider and the running motor.
@@supmission meh, it's just like any other powered machine. Take your finger or foot off the throttle and the power stops. You just have to take your finger off the lever and it cuts power.
@@scottjoyce85 Fair enuf. 👍🏽
get a water bottle battery