ruclips.net/video/O4mSdCpEfT0/видео.html *watch this video for a full step by step install *modding the gen 1,2 or 3 Mortal Kombat Arcade cabs is the same except you need a different lcd board listed in description for gen 3.
All you missing if you want is a light up marquee. Probably need a splitter & an extension to the power brick it is all. Some marquees can also be powered using a USB port if there's 1 available on the box. Not sure if you can on the video board you used.
Nice work bud. I recently molded my mk2 ND love it. How did u setup the volume with the buttons if u don't mind explaining. I'm using the l cd board to control the volume. I wanna set it up with the original volume button but I read that the current videos on how to don't work for the Gen 3 cabinet.
I plugged in the speakers and turned the volume all the way up on them. To adjust the volume all you need to do is press and hold select while playing any game and push up or down on the joystick. Are you using the arcade box console from amazon?
@@Oracle_insight no I went with the raspberry pi4. I'm in arcade heaven. Flashed the devils arcade image on a 128gig Micro SD and this thing has literally everyone of my childhood favorites. Now that I know more of how it all works I would like to build my own arcade unit from scratch. That way have a nice big screen as well.
@@theknight8036 these little arcade boxes from amazon are a nice quick way to get everything set up. It’s actually got pretty good performance. They have a hot key button where you just press select and up or down to adjust the volume.
Unsure if you will see this, but I cant find the answer in the video. I think I notice it uses the control board for the new arcade, but how do you connect it to the box and how do you swap between arcade1up system and the arcade?
I pinned some of my other videos in the comments on this video for full step by step. And once I install the Arcade box, I don’t switch back to the original Arcade1up system or games it came with.
Thank you so much for your video! I was able to do this mod to my Arcade1 Up Street Fighter II Legacy Edition. I only have one unresolved issue. The front light at the top used to light up before. When I changed the board, I no longer have the power to the front light. Is there a way I could power up the front light? The new display board didn’t have the power out to connect that power cable.
I haven’t bought one with the light up marquee but I know people have a way to do it, I just can’t remember what they did. I’m glad the video worked for you!
Do you have to replace the top speakers? I barely hear audio from them and it won’t let me raise the volume, I mean I can raise the volume but the sound doesn’t change.
Yes I used these speakers www.amazon.com/gp/aw/d/B000R9AAJA?psc=1&ref=ppx_pop_mob_b_asin_title&tag=chelseaejohnso-1-ltkna-20 And once these are installed just have the volume turned all the way up and the hot key to adjust the volume is your select button plus up or down on the joystick. That will allow you to raise or lower the volume when you are playing a game.
@@entartika weird, mine is saved and I don’t need to adjust it ever. Once I configured my controls for both players, I then restarted the system and it was saved.
Since this video I’ve modded probably about 100 of them. For some reason this one model had a really flimsy cheap plastic plexi compared to any other one I did.
No I use computer speakers from amazon and they come with built in volume control. I turn the volume all the way up on them and then I adjust the volume by holding Select and up or down while in a game to adjust the volume.
@@Oracle_insight I see you installed 3 extra button on each side. do any game uses all the buttons? also I mess up my wifi game pad button,is there a way to reset it to default. Thanks
START and SELECT are the two white/clear buttons at the top, next going down are the two green buttons and they are left trigger and right trigger, top red button is X, top blue is Y, bottom red is A, bottom blue is B, left yellow is left bumper, right yellow is right bumper.
@@SteveStephens9 this LCD board allows HDMI on the legacy Gen 3 cabs www.amazon.com/VSDISPLAY-Audio-Controller-Board-Arcade1UP/dp/B07ZVMWPZP/ref=mp_s_a_1_3?crid=XJ2UIVU4BLB0&keywords=dv170ygz-n10+lcd+controller+board&qid=1651425890&sprefix=DV17%2Caps%2C573&sr=8-3
@@zombies504 could be, and you are sure you have the correct board? Also you have the ground hooked up and it’s not pulling any cords unplugged from inside the monitor? On one install I accidentally pulled a cord to hard from inside the monitor and when I hooked it all up I had a black screen. I thought the board was bad but I opened the monitor up and found that the cord came unplugged.
I haven’t tried but heard the board doesn’t work for the monitor. You need to be able to hook hdmi up to the monitor and they don’t have a lcd board that works with it, as far as I know.
The controls are a complete mess! Why ruin the button layout? Have you ever seen anything like that in any arcade? This is what happens when people have no clue what they are doing
What are you talking about? This is for people who want more games. And the controls work great. Of course it’s not going to work with every single game but it works great with classic retro games.
![[SFM] Risky Recital](http://i.ytimg.com/vi/RzNkY1_Nk3o/mqdefault.jpg)
ruclips.net/video/O4mSdCpEfT0/видео.html
*watch this video for a full step by step install
*modding the gen 1,2 or 3 Mortal Kombat Arcade cabs is the same except you need a different lcd board listed in description for gen 3.
Is it the 1280x1024 or 1280x960? Or does it even matter?
I just got one 5 months ago , have not played it much but do want more games .
All you missing if you want is a light up marquee. Probably need a splitter & an extension to the power brick it is all. Some marquees can also be powered using a USB port if there's 1 available on the box. Not sure if you can on the video board you used.
😃😄 great work look what u made oh gosh :D u moding stuff
Thanks
You should probably upgrade the sticks too. Probably make street fighter better.
Nice work bud. I recently molded my mk2 ND love it. How did u setup the volume with the buttons if u don't mind explaining. I'm using the l cd board to control the volume. I wanna set it up with the original volume button but I read that the current videos on how to don't work for the Gen 3 cabinet.
I plugged in the speakers and turned the volume all the way up on them. To adjust the volume all you need to do is press and hold select while playing any game and push up or down on the joystick. Are you using the arcade box console from amazon?
@@Oracle_insight no I went with the raspberry pi4. I'm in arcade heaven. Flashed the devils arcade image on a 128gig Micro SD and this thing has literally everyone of my childhood favorites. Now that I know more of how it all works I would like to build my own arcade unit from scratch. That way have a nice big screen as well.
@@theknight8036 these little arcade boxes from amazon are a nice quick way to get everything set up. It’s actually got pretty good performance. They have a hot key button where you just press select and up or down to adjust the volume.
Would this work for the killer instinct 3/4 cab?
Unsure if you will see this, but I cant find the answer in the video. I think I notice it uses the control board for the new arcade, but how do you connect it to the box and how do you swap between arcade1up system and the arcade?
I pinned some of my other videos in the comments on this video for full step by step. And once I install the Arcade box, I don’t switch back to the original Arcade1up system or games it came with.
The lcd board link shows two options for resolution. Which one did you grab? 1280x960 or 1280x1024?
1280x960 is the one I bought
@@Oracle_insight thanks dude. Have you had any trouble with the arcade box at all or is it a decent purchase?
@@chris5064 I’ve built about 40 of these machines and used the arcade box and these parts in all of them and have not had one issue yet.
Thank you so much for your video! I was able to do this mod to my Arcade1 Up Street Fighter II Legacy Edition. I only have one unresolved issue. The front light at the top used to light up before. When I changed the board, I no longer have the power to the front light. Is there a way I could power up the front light? The new display board didn’t have the power out to connect that power cable.
I haven’t bought one with the light up marquee but I know people have a way to do it, I just can’t remember what they did. I’m glad the video worked for you!
Do you have to replace the top speakers? I barely hear audio from them and it won’t let me raise the volume, I mean I can raise the volume but the sound doesn’t change.
Yes I used these speakers www.amazon.com/gp/aw/d/B000R9AAJA?psc=1&ref=ppx_pop_mob_b_asin_title&tag=chelseaejohnso-1-ltkna-20
And once these are installed just have the volume turned all the way up and the hot key to adjust the volume is your select button plus up or down on the joystick. That will allow you to raise or lower the volume when you are playing a game.
come to think of it it never saves the controller layout.. when I enter a game or reset the system….::
ruclips.net/video/oV94K1CP-kA/видео.html
Watch this on how to adjust the volume
@@entartika weird, mine is saved and I don’t need to adjust it ever. Once I configured my controls for both players, I then restarted the system and it was saved.
Would the button upgrade work with a stock Defender 40th anniversary 1up?
Sorry for my english
Can we use the original speakers and plug on the news board or the plug dont fit?
You would need an amp to turn the original speakers up
Do u need to change your buttons/joysticks if u want to put an arcadebox in it?
Yes
Hey sorry to ask is this possible to do on a arcade one up Pac-Man or Centipede?
I think so, I just haven’t done it.
@@Oracle_insight all that’s different is the button layout i think
@@SlicksDead if so then it should work, you just need to get the right LCD board to convert the monitor to HDMI.
Next time u drill just drill backwards with step bit it will not brake
Since this video I’ve modded probably about 100 of them. For some reason this one model had a really flimsy cheap plastic plexi compared to any other one I did.
Can I do this to the mk2 deluxe version ?
how much is the arcade box? it's out of stock
I saw they just went out of stock, this happens off and on but they are around $80-90.
www.amazon.com/Arcade-Console-Classic-Player-Wireless/dp/B09NHNPMK7/ref=dp_prsubs_1?pd_rd_i=B09NHNPMK7&psc=1
Found some in stock online
are you using a mini amp for the speakers?
No I use computer speakers from amazon and they come with built in volume control. I turn the volume all the way up on them and then I adjust the volume by holding Select and up or down while in a game to adjust the volume.
@@Oracle_insight I see you installed 3 extra button on each side. do any game uses all the buttons? also I mess up my wifi game pad button,is there a way to reset it to default. Thanks
What’s your button layout?
START and SELECT are the two white/clear buttons at the top, next going down are the two green buttons and they are left trigger and right trigger, top red button is X, top blue is Y, bottom red is A, bottom blue is B, left yellow is left bumper, right yellow is right bumper.
@@Oracle_insight thank you. Any chance you have a link to the same board but for gen 3
@@SteveStephens9 for the LCD board? I have a link in the description but I’ll post it here
@@SteveStephens9 this LCD board allows HDMI on the legacy Gen 3 cabs
www.amazon.com/VSDISPLAY-Audio-Controller-Board-Arcade1UP/dp/B07ZVMWPZP/ref=mp_s_a_1_3?crid=XJ2UIVU4BLB0&keywords=dv170ygz-n10+lcd+controller+board&qid=1651425890&sprefix=DV17%2Caps%2C573&sr=8-3
Do you need the wired arcade box or wireless good
Doesn’t matter but I get the wired controllers
Do you have to replace the button/joystick kit?
Yes to work with the arcade box
i wanna buy this MK2 machine but i also want to play pac man. so its possible you saying ?
Yes it has the original pac man game, it’s actually called puc man
I have everything hooked up, but no picture. Need help.
Do you have the mortal Kombat model, same as the video?
@@Oracle_insight yes I do.
Do you think the board might be bad?
@@zombies504 could be, and you are sure you have the correct board? Also you have the ground hooked up and it’s not pulling any cords unplugged from inside the monitor? On one install I accidentally pulled a cord to hard from inside the monitor and when I hooked it all up I had a black screen. I thought the board was bad but I opened the monitor up and found that the cord came unplugged.
@@Oracle_insight I figured it out. Got it working. Thank you so much.
Can the simpsons arcade machine be modded to add more games?
I haven’t tried but heard the board doesn’t work for the monitor. You need to be able to hook hdmi up to the monitor and they don’t have a lcd board that works with it, as far as I know.
The controls are a complete mess! Why ruin the button layout? Have you ever seen anything like that in any arcade? This is what happens when people have no clue what they are doing
What are you talking about? This is for people who want more games. And the controls work great. Of course it’s not going to work with every single game but it works great with classic retro games.