You can tie some wire to your brake rotor and to the the bolt you stick in the stub shaft and use it instead of a slide hammer for future reference. Works great. Keep up the good work
Devin you looking skinnier every episode, the last few months I’ve been grinding on weight as well, down from 215 to 194. Staying healthy is important good for you brotha ❤️💪🏽
I bought the harbor freight low lift transmission jack 8yrs ago and trans jack really help with me removing the evo8 trans easier compare using to 2 floor jacks.
Reminds when I did that in an old beater 1.6 tracker 4wd I broke the clutch pedal (well its was worn when I had it) which I though clutch was bad which it wasn't clutch was fine, I did buy new clutch for it. It turned out I broke the shifter clip bracket on the transmission. After a relative put clutch in for me which I shouldve done myself car still acted like the clutch was bad. I end up selling it got what my money back from I originally paid for the beater. You might wanna look at the shifter clip bracket on the transmission, if it's worn in alot, eventually it can break from a heavy foot.
Toughest from my experience as well I’ll say it’s releasing the throw out bearing for sure! Other than that everything is very simple and easy. To answer your last question no you do not have to remove the downpipe :)
This is gonna sound weird but I always try to save my deuce until a new video is released so I can watch it while I lay cable. I haven't shat without watching Devin's channel in probably atleast a month. Dedicated as fuck.
Depending on your financial status, it’s your decision to choose. I am a huge evo fan! However though I would say that your wrx is more reliable than an evo! Evos do require a lot of maintenance, they tend to fail a lot with transmission problems such as gear grinding, or transfer case problems a.k.a death whine. At the end of the day evos are very fun cars to drive, seats aren’t too comfortable for a daily driver however you’ll be breaking necks and got a good baby turbo ;)
save the money to buy new head gasket xD jk. or save it to buy upcoming nissan 400z. subi is 19 and evos are atleast 5 year old means more breakdowns and maintenance on evo compare to 19 wrx. do mechanical mods such as clutch, breaks, manifolds, etc in your budget.
PV Anime hahaha.. I’ve already owned 300zx and modded 350z now on to these sedans. New sti coming out soon anyways. Probably smarter to wait for that. Wrx is modded lol.
It's kinda funny when, Devin rebuild the engines for those Evo's it was almost the same time that those clutch was change ...... so what do you expect. SMH!!!!
Please consider buying American, although American owned the reason they're so cheap is that Harbor Freight tools are made - mostly in China - of a kind of bargain plastic that sublimates directly from solid to a gas, like dry ice, losing their mass year after year in a pungent waft of formaldehyde and pickled sea cucumber. A cheap alternative is Craftsman, but economics guides business, and i will still be a fan just hoping for conciderion.
The man finally has a lift that he’s been waiting years to obtain.....and there he is.....still laying on the ground under a car. LOL 😂
instaBlaster...
anyone else notice that devin has the best background music than any other RUclipsr?
check out e_ought
Definitely top 3 of the ppl I follow on RUclips
Eh. A lot of the songs he chooses don’t have a good melody. They just sound like random notes put together that don’t really work well together
Whenever I'm think dang I wonder when the next vid is coming it comes
It comes out every day lmao
we know the daily uploads are probably a lot of hard work but we appreciate them so much ❤️
Not Probably! Editing takes the most time! Crazy amount of work and dedication.
Did we all just glaze over the fact that these videos aren’t self-recorded with a tripod and selfie stick any more?
I noticed that! haha he has a side kick now lol!
Nah Jared’s been filming for a few weeks now
@@Leeoh949 lol yeah, like, that's exactly what we were getting at.
You can tie some wire to your brake rotor and to the the bolt you stick in the stub shaft and use it instead of a slide hammer for future reference. Works great. Keep up the good work
Devin you looking skinnier every episode, the last few months I’ve been grinding on weight as well, down from 215 to 194. Staying healthy is important good for you brotha ❤️💪🏽
I bought the harbor freight low lift transmission jack 8yrs ago and trans jack really help with me removing the evo8 trans easier compare using to 2 floor jacks.
You have to give Devin props, a video every day is amazing.
Legend says Devin will reach a million subscribers👌
More than that for sure
10 million
Should’ve dropped the whole subframe out bro. Makes life so much easier on these X’s
Devin, your daily vids r what keeps me goin yo. Keep em comin
Clutch burnouts.
Not the burnouts I was looking for but I'll take it.
One day I am gonna have a garage like that you are a big inspiration keep up the work
Reminds when I did that in an old beater 1.6 tracker 4wd I broke the clutch pedal (well its was worn when I had it) which I though clutch was bad which it wasn't clutch was fine, I did buy new clutch for it.
It turned out I broke the shifter clip bracket on the transmission. After a relative put clutch in for me which I shouldve done myself car still acted like the clutch was bad. I end up selling it got what my money back from I originally paid for the beater.
You might wanna look at the shifter clip bracket on the transmission, if it's worn in alot, eventually it can break from a heavy foot.
8:49 I thought that wheel leaning against the frs was actually on the car🤦😂😂
Didn’t you just rebuild the motor and replace the clutch a few months ago? If you did someone can’t drive a standard.
Devin: uploads video
*OSHA has entered the chat*
Perfect timing! Can start my day with a video from Devin!
Damn Top5! Love you Bro from Transilvania!
Romania is a beautiful country, especially near the BLACK SEA!
Why arent you wearing a mask in the store tho
Masks are for lemmings
Great video as always :)
What was the toughest part of all this? Did you have to remove the downpipe?
Toughest from my experience as well I’ll say it’s releasing the throw out bearing for sure! Other than that everything is very simple and easy. To answer your last question no you do not have to remove the downpipe :)
@@serrufus4503 Thanks! I didn't know the throwout bearing was so tough to release so good to know.
Wow, killed that clutch pretty quick
Haha the clutch burnout was crazy
I think vinyl is pretty cool, just cause of all the colors and patterns compared to paint. But i hate how bad it has orange peel.
There is no savi g that flywheel imo. The amount that would need to be taken off would ruin the clearances.
This is gonna sound weird but I always try to save my deuce until a new video is released so I can watch it while I lay cable. I haven't shat without watching Devin's channel in probably atleast a month. Dedicated as fuck.
Evos and subies loving the content!!!! 💯💯💪🏼💪🏼
Capacity Engine Support Bar try this.
Keep up the good contact man, and put a damn plate on the blue Evo! Lol
Did you needed a monoclock collar by any chance ? The shop that has done everything to my Evo says it’s good to have a aftermarket one so I bought it
Didn't know the fuseable link box cover suppose to open like that
Bro that lift is making your life much easier
I like the smiley face on the FRS
Damn that clutch was beyond roasted
I like that instrumental!!!
Pretty sure Devin has become the Evo God
Devin with the daily bangers
I think you need another Evo 😀🤘
Nice background music at the end
Should I trade my 19 wrx in for a evo x for daily (I don’t drive a lot) or mod the wrx?
Why or why not
Depending on your financial status, it’s your decision to choose. I am a huge evo fan! However though I would say that your wrx is more reliable than an evo! Evos do require a lot of maintenance, they tend to fail a lot with transmission problems such as gear grinding, or transfer case problems a.k.a death whine. At the end of the day evos are very fun cars to drive, seats aren’t too comfortable for a daily driver however you’ll be breaking necks and got a good baby turbo ;)
save the money to buy new head gasket xD jk. or save it to buy upcoming nissan 400z. subi is 19 and evos are atleast 5 year old means more breakdowns and maintenance on evo compare to 19 wrx. do mechanical mods such as clutch, breaks, manifolds, etc in your budget.
PV Anime hahaha.. I’ve already owned 300zx and modded 350z now on to these sedans. New sti coming out soon anyways. Probably smarter to wait for that. Wrx is modded lol.
Envy Swift those are standard maintenance items for evos. I honestly can’t believe you think an EJ engine is more reliable lmao 🤦🏾♂️
Suprised u didn't get pulled over as u ride the chart as the police rided by
I have a 2009 Mitsubishi lancer. And I want to modify into a evil can I do that?
Love the hyperblue evo 8 wheels
U should never use chrome sockets with an impact gun chrome sockets will brake
The FRS either needs some love or sold to someone who will cherish it
Logan O 20 bucks I’ll take it🤟
why a single plate clutch and not a twin plate?.
I wouldn’t use that flywheel again man, that thing is hit.
Best content on youtube🤙
We need a pinky update, how she doing Devin ? UK out.
Start working on the duramax i we want to see all the mods your a going to do on it :)
Why don’t you put your car higher on the lift?
Greetings from Germany!
Keep up the good work buddy 🔥
How many days did it take you to do this.
Why don’t you go up on the lift
Action clutch ftw
Nice Vid Brother 👍
I can't wait to what devin would do to a mustang GT
im trying to find a replacement left front caliper for my 2006 sti can someone help I can’t find one anywhere
Devin doesn't wear mask in stores
Good to see dev dirty AF .. video lit as allways 🤐
10:10 LOL
ACM mod that m3!
Yooo your suppose to wear a mask COVID man
COnVoID-19.84
Great vids
Man, wash the FRS....
Damn 700$ for a clutch
Evo is looking 👌 🔥 😍 💯
get an srt
Does he not need a mask in stores?
Hey good job
Anybody notice how easy it was? Not!
I want a evo so badly
🔥🔥🔥🔥🔥🔥
A million dollars you say 🤔
I want a cool car that i don't have to work on everyday.......
Devin love from Pakistan ♥️♥️💯
The Devinator!!!
It's kinda funny when, Devin rebuild the engines for those Evo's it was almost the same time that those clutch was change ...... so what do you expect. SMH!!!!
First...from Kenya! Big fan of your content!
For real pal
@Ian Murimi Hata wewe unakuanga huku?
@@brianmburu4671 yeah, but I think you're mistaking me for someone else.
👍
Evo X is my favorite 💯🔥🚀🚀
Y do u never wear a mask 😷
👍🏻🔰
Why aren’t u wear mask in store
First. NICE FROM South Africa
😎
Hi
Yolo
LETSGOOOO
hi
lol bruh touches his face A LOT
Devin is looking Huge like Ronnie Coleman
Please consider buying American, although American owned the reason they're so cheap is that Harbor Freight tools are made - mostly in China - of a kind of bargain plastic that sublimates directly from solid to a gas, like dry ice, losing their mass year after year in a pungent waft of formaldehyde and pickled sea cucumber.
A cheap alternative is Craftsman, but economics guides business, and i will still be a fan just hoping for conciderion.
What?
@@ruskibruski Harbour fright is crap!!.
Another breakdown on an unreliable EVO. Lucky you dont pay for labour and get deals on parts. You have a lot of experience on these cars by now.
Should he get a camery?
You should talk clear and property I can understand you word's