With the Exedy twin and triple plates, you should remove those anti vibration tabs that are on each plate, they make the clutch noisier but stop clutch lockout and prevent pre maturely wearing the clutch out, fit them all the time and this a known thing in the mechanical world, just a helpful tip for ya'll
I have this exact clutch and it's awesome. Daily driving it no issue very easy and very smooth. Holds my 450tq very well, feels very close to stock clutch.
Hi Devin, I noticed that the clutch model you got is the MM062SDF which is stated as only rated for 553 ft/lb of torque, Exedy would probably would have been better providing you with the cerametallic version MM062HD for your power level, that one reputably is good for 615 ft/lb of torque. I have the HD version in my much lower powered GSR and honestly believe that it’s the best DD clutch on the market.
Very Nice 👍 I like Exedy! I’ve ran 2x Comp Twin Disk Clutch on my Evo 8 and not gonna lie their good but I was disappointed cause didn’t last very long on my 8 esp not for daily driving. The reason I ran CC Twin Disk cause I was getting a steal deal on it. Id say best for track or drag use! but I’ve switched to ACT and very satisfied. I Will be looking into Exedy next time I need a Clutch.👍
anyone would be happy with free or sponsored clutch and goodies. But caution is required with putting strong clutches into five speed WRX and similar engined Subarus.
Shouldn't you apply red threadlocker kn the fly wheel threads, I was always told that's extremely important, sometimes proper torque alone isn't enough. I'm also positive in the service manual for evox they require the red thread locker
Just changed the clutch in my evo. Ran into an issue, car will not start only clicks from the starter. I tried to spin the engine and the flywheel feels locked, would you think that would mean anything? I checked all the wiring/grounds everything is pluged in, battery is good and charged also.
The Exedy thing you said to stick in the ground is a fan! Hope to see you around Washington sometime and meet up with the Evo's!
So proud to see how far along you and your channel has come along. Honestly, I look forward to watching every episode!
I’m glad for these partnerships takes place, you well deserves the acknowledgment for your great work
nobody noticed the allstate thing plugged into his car "sir i see youre doing boosted launches"
Yes I have in a triple disc and it does make noise. Bobbi Wallace is something else.
“Honey, we’re driving to Seattle to get tacos, to celebrate my new clutch” need the miles 😂
When will you offer a course in engine building management
Finally the boy is back in daily content ❤
I can feel clutch too by you're smile 🤣
I like how he has a insurance saver plugged into a 700hp+ evo 😂
Man Bobbi need to come stock with all EVO's and STI's. You two are truly partners and half the fun of watching the videos.
Your welcome I recommended this clutch system a long time ago for this build and the blue evo
you've come so far, since the old days of working out of the garage, nice job on building your sponsors while keeping the content informative and fun.
Upvotes on trying a diff spoiler on the half wrap
This is the sort of do it yourself maintenance that saves so much money congrats D and with Bobbi happy with using it shows you are doing well so far.
Lmao 1:16 Devin that sir is a fan
JDM fan
Great to see the evo 10 on the road again. Quality clutch!
I’m so happy you went with exedy! Hands down the best clutch I have ever used!
With the Exedy twin and triple plates, you should remove those anti vibration tabs that are on each plate, they make the clutch noisier but stop clutch lockout and prevent pre maturely wearing the clutch out, fit them all the time and this a known thing in the mechanical world, just a helpful tip for ya'll
I have this exact clutch and it's awesome. Daily driving it no issue very easy and very smooth. Holds my 450tq very well, feels very close to stock clutch.
i get more and more jealous of his builds every video i watch
That is a sick looking clutch. It will be great to see that car back on the road and going all out.
Do a full engine bay build on the half wrap 10!!!!
Finally the old lady got some love!!
On my Evo. I have run the Twin Exedy for a few years and it's great
I can't wait to get one! I also think my throwout bearing is on the way out and making a heap of noise!
@@DamianHyde Always change the thrust bearing on a new clutch.
I’ve had my exedy oem replacement for over 100k awesome clutches
The BEAST is back on the road!
Congratz with the sponsor! Can't wait to get some more action with the X
Got Exedy triple disk on my 900hp Evo 8 and it’s the amazing
Your so god dam talented devin.ive worked with cars since I was 16 and now I'm 49 and you put me to shame !!!
I finally got ur video smooth now to watch ur clutch works
I guess Bobbi will be wanting one in her sti when it's built with the new bottom end
The background music🔥in the unboxing part
over here in Singapore we got a nickname for them. we named it as “Ice-Cream” clutch.
Welcome to #teamExedy I have a twin disk for my 86 and 350z. Best company to work with.
look into a steamer or steam wand for cleaning parts,cleans much better than most cleaners!
“I need to get 750 miles on it tonight, tonight, tonight!” Had me dying😂
The car drones like crazy
Hi Devin, I noticed that the clutch model you got is the MM062SDF which is stated as only rated for 553 ft/lb of torque, Exedy would probably would have been better providing you with the cerametallic version MM062HD for your power level, that one reputably is good for 615 ft/lb of torque.
I have the HD version in my much lower powered GSR and honestly believe that it’s the best DD clutch on the market.
Love the longer videos 🙌🏼
I hope everyone notice he didn't install the act mono loc you need that man
Love how you make it look easy
So many goddies. Evo X is going to feel like a beast.
23:11
POV: you're one of the residents on the street looking out your window with a sour look, while they're having a good time
Very Nice 👍 I like Exedy!
I’ve ran 2x Comp Twin Disk Clutch on my Evo 8 and not gonna lie their good but I was disappointed cause didn’t last very long on my 8 esp not for daily driving.
The reason I ran CC Twin Disk cause I was getting a steal deal on it.
Id say best for track or drag use!
but I’ve switched to ACT and very satisfied.
I Will be looking into Exedy next time I need a Clutch.👍
Now we know why he took so long to change the clutch lol
anyone would be happy with free or sponsored clutch and goodies. But caution is required with putting strong clutches into five speed WRX and similar engined Subarus.
@@keithprinn720 whys that?
@@nikolasstankovic6794 because if the clutch is very strong you break the box not the clutch.
Shouldn't you apply red threadlocker kn the fly wheel threads, I was always told that's extremely important, sometimes proper torque alone isn't enough. I'm also positive in the service manual for evox they require the red thread locker
Very detailed video I’m a actually due for a new clutch. Thanks for making this video about the exedy clutch. I’m sold now! 👍🏼
gratz on the sponsor
you best bro .. just put it and I'm looking forward to more videos .. Greetings from the Czech Republic
picture hanging wow
holy startup sounds 18:45
Love that camo evo 10
Ayyee! I was right about you getting the exedy twin disc clutch kit lol. Now I know for sure to get it
It's good clutch, I have the triple disc.
These clutch can help my granny shifting skills
Yaaaaaaaaaaaassss!!! Big Boi Evooooo!!!
One day you should clean you evoX bay like you did the blue8
ayyyyyye new vid!!
We need some “I understand” merch
thank you for all this Nice video
Awesome clutch. I think it’s pronounced X ehhhh deee and that thing you want to stick in the ground is a fan.
Do logo on steering wheel in black and white camo wrap
Should have went with the NAPA brand clutch
Should’ve used act monolock
Do a full eBay build on a Civic/Nissan
Stright up
Her reaction to 750 miles "tonight" 🤣🤣🤣🤣🤣
i think the little box was for bobby
Wow that’s Nice Bro 😎 💯🔥👌🏽
Notification gang💯🔥🔥
Good job mate, did you replace your spigot bearing & rear main seal while you had it apart?
I can't drive I have on flip flops ! 🤣 Sick !!!😛
Aswsome car. Clutch looks so good
Beautiful cluth 😍🤟🤟💪💪💪🔥🔥🔥🔥in exited to be the power in that cluth 🔥🔥
Can we get 750 miles on it tonight? Bobbi; “NO”!
No dislikes. Yammy
After 700miles
Devin: i missed you sexy
🔥🔥🔥🔥
Shocked you didn’t cerakote all the crusty stuff
I feel like your evo would look better with a complete wide body kit idk maybe it’s just me
What display is that that you have in the car at 19:03? How long have you had it? How well has it done? Have you customized it at all?
what chemicals/cleaner did you use to clean out the inside of the transmission?
Just changed the clutch in my evo. Ran into an issue, car will not start only clicks from the starter. I tried to spin the engine and the flywheel feels locked, would you think that would mean anything? I checked all the wiring/grounds everything is pluged in, battery is good and charged also.
Why you don’t use the ACT Monolock?
Where’s you get that screen 😍
Looking at that entire price list seems like its a $100k Evo.. I want to get my engine built .. Curious on your turbo as the link is broken
Did you put any locktite on them bolts for the flywheel and clutch? They do tend to back off
👑
What brand of CV clamps have you been using now? and are they durable? Looking for a good set for my 7 that won't snap when you try to clamp em down
Oh yeee time to rip
Where did you get the steering wheel? I didn’t see a link For it.
What kind of battery do you have on your dewalt? Because it’s not a real dewalt battery it’s some kind of knock off im
Just curious
Hallo dude,i have a lancer dangan 1.8 can i use this clutch in my dan gan?🙏
750 miles TONIGHT😂😂
What kind of wheel/tire setup you have on?
Car so loud I hear none of the convo with Bobbi 😂
Air so you let all state track your driving even tho you ride like a mad man in their eyes 👀
Wait... What clutch was it?
The disks also had a blue line on the edge did u align them?
Yes he did
Merch!