Can you weld thicker pipe? Something where you need to do a Root, Hot pass, fill, and cap. Im very curious if you can layer beads with this welder and how it would hold up in a destructive test. Excellent work sir. 🙇🏼♂️
Sunbae, do you have any tips or tricks for welding stainless steel flexible hose? I use your videos for reference whenever I get stumped as I learn. Thank you!
It is OK for handrails but not for a dairy tube. Sometimes it is impossible to get proper access and a number of stops/starts will be required. The only proper way to get a full penetration with a smooth surface contacting food product is to TIG it.
Yep. All the food contact pipes I’ve seen in the beverage industry need to be purge welded with Argon flowing inside the tube, keeps the metal on the inside of the tube smooth! Porosity = bacteria trap!
To me, laser welding looks perfect. Now, I'm obviously not an expert welder, but if it does not look perfect to you experienced guys, could you please explain why? Thanks!
I think in this specific video, the content producer (guy welding) wasn't happy that his first attempt didn't clearly demonstrate the laser's ability to penetrate a 2mm thick pipe wall as evidenced by the inspection mirror. The second higher power attempt showed full penetration which made him happy with the quality achievable using a laser welder.
Excelente tutorial maestro, feliz año nuevo, espectaculares resultados, gracias por compartir sus conocimientos y experiencias, un saludo cordial y por supuesto un gran like desde Narón (Galicia) 💪🤓😜
Obrigado. Feliz Ano Novo. Para obter informações sobre máquinas de solda e periféricos, você pode obter respostas mais precisas entrando em contato com o fabricante. ↓↓↓↓↓↓↓ korea@nswel.com
@@woodennecktie But man, welding thin metal is so hard! Its so much easier Tig welding metal and pipe over 3mm, because then its much easier to see how much filler Rod to add. I have been welding for only 3 years, and thin material is my biggest enemy 😂
The second part of the video shows the use of a gas infusion into the tube in order to produce a non contaminated interior weld. Did you use Nitrogen, Helium or another gas?
This has changed my opinion on laser welding, I was under the impression that you just weren't able to get good penetration from other videos i have seen but clearly it's down to who is the operator
I don't trust the first round - the second one looks nicer (at least welded to sustain some pressure) - I would really like to test suche an installation to if it is applicable for other ways to weld (tick material like 10-MM steel) and from bottom up or vice versa - Lokks interesting but has to be tested in real work because demos are full time like wonders -:)
Be careful with those gloves, I've accidentally zapped a leather glove while tacking metal together with a laser welder and left a small cut on the index finger that almost penitrated the leather
![weld [HAGOJIBI]](http://yt3.ggpht.com/ytc/AIdro_lButtTy6bwshHHOdUuuc7ktsddm0YgRj2FhqoPUm3aQA=s48-c-k-c0x00ffffff-no-rj)
![Felix "Unfair" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/Oswujxm2Ag0/mqdefault.jpg)
![Blox Fruits Dragon Rework Update [Full Stream]](http://i.ytimg.com/vi/EqDAp8udhm0/mqdefault.jpg)
2023년이 행복 가득한 한해가 되시길 기원합니다.
새해 복 많이 많이 받으세요.😍
Same to you Master Welder. 🙇🏼♂️
Can you weld thicker pipe? Something where you need to do a Root, Hot pass, fill, and cap.
Im very curious if you can layer beads with this welder and how it would hold up in a destructive test.
Excellent work sir. 🙇🏼♂️
seams there are no filler material so probably not, guess you can add material in the same way as a tig weld , but then you might as well just tig it.
@@mareli82 it does have a wire feed. I saw it on another video. Its like mig but super thin. Like 1/16.
Happy New Year
Wishing your a safe, healthy and prosperous one.
Thank you for sharing
🤗🙏🇺🇲
Thank you. Happy New Year.
Sunbae, do you have any tips or tricks for welding stainless steel flexible hose? I use your videos for reference whenever I get stumped as I learn. Thank you!
Merry Christmas and a Happy New Year mate
Thank you. Happy New Year.
ㅍㅎㅎㅎㅎ~~뱀장사꾼 비슷하네요. 좋은영상
감사합니다.
Le plus important est de vous souhaité un excellente santé pour 2023.
Merci pour la vidéo.
Merci bonne année.
That was interesting, thanks for the demo. Can you go through the machine and it's settings?
Thank you very much for the great tips ❤️🌹
It is OK for handrails but not for a dairy tube. Sometimes it is impossible to get proper access and a number of stops/starts will be required. The only proper way to get a full penetration with a smooth surface contacting food product is to TIG it.
Yep. All the food contact pipes I’ve seen in the beverage industry need to be purge welded with Argon flowing inside the tube, keeps the metal on the inside of the tube smooth! Porosity = bacteria trap!
To me, laser welding looks perfect. Now, I'm obviously not an expert welder, but if it does not look perfect to you experienced guys, could you please explain why? Thanks!
I think in this specific video, the content producer (guy welding) wasn't happy that his first attempt didn't clearly demonstrate the laser's ability to penetrate a 2mm thick pipe wall as evidenced by the inspection mirror. The second higher power attempt showed full penetration which made him happy with the quality achievable using a laser welder.
Excelente tutorial maestro, feliz año nuevo, espectaculares resultados, gracias por compartir sus conocimientos y experiencias, un saludo cordial y por supuesto un gran like desde Narón (Galicia) 💪🤓😜
Gracias feliz año nuevo.
Happy New Year ,,, Looking forwards to a year full of your videos , I hope its a happy and healthy year for you.
Thank you. Happy New Year.
I like it, happy new year 🌟
Thank you. Happy New Year.
What was that black pipe at 2:20 - did he apply gas inside the pipe ?
there are many type of welding nozzle, can you show what situation those nozzles are use ?
С новым годом ! 👍
Спасибо, с Новым годом.
수전증때문에 현장포인트에 많은제약이 있어 이번에 배관쪽으로 전향할예정인데 하고지비님 고견을듣고싶습니다
Thank you
Вот это то о чём я и говорил. Для таких видов изделий, такой сваркой конкурентов нет!
И скорость и качество.
Is possible welding without rotator machine? Wath you think?
Feliz Ano Novo.
Top essa soldagem, quanto custa U$ essa máquina a laser?
Obrigado. Feliz Ano Novo.
Para obter informações sobre máquinas de solda e periféricos, você pode obter respostas mais precisas entrando em contato com o fabricante.
↓↓↓↓↓↓↓
korea@nswel.com
@@weldHAGOJIBI Muito obrigado pelo retorno
Happy New Year 🎆
Thank you. Happy New Year.
What's it like on site,in tight spots?
2023년도 좋은 영상 기대합니다^^~
감사합니다 새해 복 많이 받으세요.
Whats the difference in strength between the 2 welds?
the outside only is by nature less material in the connection , welding trough is perhaps double in mechanical strenght
@@woodennecktie But man, welding thin metal is so hard!
Its so much easier Tig welding metal and pipe over 3mm, because then its much easier to see how much filler Rod to add.
I have been welding for only 3 years, and thin material is my biggest enemy 😂
Спасибо большое. С праздником тебя и твоих близких.
Спасибо, с Новым годом.
좋은 동영상 감사합니다.
С Новым годом! 🎄👍🤝🎉🇷🇺
Спасибо, с Новым годом.
Spawa lux pozdrawiam.
새해복 많이받으세요ㅎㅎ
기대하던내용이었는데 실제로 보여주거나 알려주는 분이 없었는데, 궁금한점이 어느정도 해결됐습니다!
사용해보고싶은데 사달라고해도 회사 반응이 시큰둥해서 열받네요ㅋㅋ
감사합니다 새해 복 많이 받으세요.
Antes que nada Feliz año nuevo. Gracias por el excelente aporte como siempre.
very clean proces and the control of the melt is not even at maximum , this laser is the weld of the future in "clean" production
The one Problem that these Machines are VERY expensive as of Now. One day they may be More "Cost effective".
The second part of the video shows the use of a gas infusion into the tube in order to produce a non contaminated interior weld. Did you use Nitrogen, Helium or another gas?
Дуже дуже файно .🖐️🇺🇦
How much is the laser machine?
Спасибо Друг!
This has changed my opinion on laser welding, I was under the impression that you just weren't able to get good penetration from other videos i have seen but clearly it's down to who is the operator
BRO ITS A THIN ASS PIPE I HOPE YOU GET GOOD PENETRATION WITH A 45,000$ MACHINE
你好，你的焊接技术讲的很好，我公司也是专业生产手执激光焊接头，有机会可以用用，
They seem to be very good for thin walled pipe or plate.
Красиво на токарном станке ..... А у меня холодильная станция на СО2 , нагнетание до 100 бар , ... Какие предложения ? Нерж или арм. медь.?
Было интересно. Спасибо.
Feliz ano novo!!!!!
Obrigado. Feliz Ano Novo.
Всё таки следовало бы сделать разрез трубы, нам зрителям было бы очень интересно как в реальности выглядит внутренняя сторона сварочного шва.
For a second there, I thought it read "laser welding sanitary wipe".
For thin materials it seems perfect. Anything with pressure needs a root.
백관 파이프도 가능합니까?
สวัสดีปีใหม่ครับผม
ขอบคุณ สวัสดีปีใหม่.
Greetings
Should have argon gas purge the inside of pipe for clean penetration
Ternyata las fiber laser bisa juga diinfus. Jadi pingin beli
언젠가는 휴대용,가정용으로 한대씩 가질수 있는 날이 올수있길 ...^^
В реальных условиях часто приходится сваривать детали с зазорами до 5 мм.
Что может сделать здесь лазерная сварка?
I don't trust the first round - the second one looks nicer (at least welded to sustain some pressure) - I would really like to test suche an installation to if it is applicable for other ways to weld (tick material like 10-MM steel) and from bottom up or vice versa - Lokks interesting but has to be tested in real work because demos are full time like wonders -:)
Нужно придумать отдельный контакт для массы, чтобы не прикоснуться соплом,как на полуавтоматической сварке mig
고가라는걸 빼고 혁신적인 제품인것 같네요 많은 물량을 소화하는데 작업장을 구입해 볼만한뜻 합니다.
Tolong praktekkan di ketebalan 0,75 apakah bisa?
이거 갭이있는 건 용접안되지요?...
레이져 용접 너무 강력한데...
역시 쎄게하면 깔끔하겐 않나오나..
👍👍👍👍👍👍👍👍👍👍👍
You are the master of welding
Be careful with those gloves, I've accidentally zapped a leather glove while tacking metal together with a laser welder and left a small cut on the index finger that almost penitrated the leather
👍🙆🏻
is "si mi dah" one word, two words or three.
First of all he used the calipers wrong. Should have uses the narrow end not the thicker middle to measure a round stock.
😍😍😍😍😍😍😍😍😍😍😍😍😍😍😍😍😍😍😍😍😍😍😍😍
Idk man..
No tig welder could make those welds🫨
🥲
Awesome no skill needed !
На 0.26 увидел "замер" стенки трубы.Дальше можно не смотреть,ежели корова в говне стоит,в избу можно не заходить...
기똥차게 용접 잘되는데 한대가격이 너무 고가라 회사에서 잠깐씩 용접하기에는 역부족...에휴....
weld [HAGOJIBI] 님도 새해복 많이 받으세용~
감사합니다 새해 복 많이 받으세요.
И чем это видео полезно? Так ничего ценного не объяснил и не показал... Не занимайся блогом если толком ничего не знаешь.