When comparing welding technologies the way to think about laser welding is that it can penetrate deep but narrow and has a smaller heat affected zone. With settings and technique correct it can provide a faster solution to many welding scenarios. Yes to pipe yes to butt yes to various metals including dissimilar and so forth. First know that it uses light only to melt the metal. There is no arc. You can weld behind glass. Prices are higher but tech is deflationary. If you are a small or medium size fabricator you need to take this serious. Amortise the cost through finance just like you do with your car or other equipment without hesitation. With a shortage of skilled tig welders you might find that a semi skilled worker using laser at 4 to 10 times the speed might make economic sense.
Excelente tutorial maestro, cómo siempre, esos cordones tan peculiares, parece que está cosido con hilo, gracias por compartir sus conocimientos y experiencias, un saludo cordial y por supuesto un gran like desde Narón (Galicia)👌🤓😜
용도와 사용처에 따라 달라질것 같습니다 사실 용접이라는 작업을 많이 하는곳에서는 레이저용접기를 들이는것에 고려해볼 사항일수도 있지만 용접이 주가 아닌곳에서는 아직까지 스틱이나 티그 또는 코어플럭스류가 대세이지 않을까 싶네요 말씀하신것처럼 물론 시대에 맞춰가려면 레이저 용접기 라는것이 존재하는구나? 가 아니라 실무자 분들은 반드시 조작요령이나 원리정도는 숙지해야 한다고 봅니다
I know itsnot english but you explained itvery well than my professor on our major👏🏻✨ But i would love buying this machine its great and the welds are clean and smooth same with the penetration ✨
i wouldnt b surprised if these became pretty much standard for any welding they can do, n the only "non laser" welders will b for specialty stuff where a laser simply cant/wont work thanks for the video man
sure kind of boom coming the practiced steady hand like tig welding requires, being replaced simple setting will convert beginners to """professional""" welders
I'm welding a long time but thought the laser was a gimmic thanks for showing a good video and I also work with a lot of metals can it do copper and brass as good
Greetings from Pakistan, Thank you so much for your interesting videos. I learned all about Laser welding from your videos. Alas the start up cost of Laser welding machines is very high in my country, otherwise I would want to use it too
I've never seen any Asian company show that. I own a machine and usually make one pass for what I'm doing. It isn't needed for the light work I do. In the future I'll get some thick steel and do some traditional fillet weld and see how it turns out
Джин спасибо за видео! Я думаю применение лазерной сварки не нашло ещё широкого применения, по крайне мере в России, ввиду из за того большей степени применение только на более менее ровных поверхностях! Ещё раз спасибо за твой труд.
@@mybattlefield5854 каким способом. Если по бокам это масса. Если она не примыкает контактами сварки не будет. Я пользовался лазерной сваркой на производстве- применения 10% остальное Тиг сваркой.
Thank you for the video. Been following the industry for a few years, and the prices for laser welders actually seem to be moving up, not down. There only seems to be one company in the US that is really pushing a viable solution and that unit cost $25k+. I hope the prices do start to come down because I really want to buy one of these.
Laser welders have been coming down in price around 5% per year but unfortunately the 20-30% rise in just about everything due to inflation and supply shortages have resulted in a net price increase. Prices are starting to come down so hopefully laser welders too. I would love to get one for my shop too.
Many thanks for informative video and English subtitles. One question: What could be a reason for wire sticking on the end of a weld, and how to solve it, without cutting of forcing it removal from a weld end?
by the way, miller sure has , but price is way higher the issue is that most likely you get same chinese laser in different box but, they speaking better english
I think there's probably another big advantage, less reject welds and scrap material. I've inspected welds, most in the nuclear industry, and when there's a bad weld there's almost always two scrap components and the material is lost along with the labour and macining time it took to male them. Less skill involved and a more precise process must reduce waste and boost quality.
Здравствуйте скажите причину появления черно-коричневого дыма при сварке лазерным аппаратом, я проверил длину трубки сделал все как на видео , но нечего не меняет, линзы чистые , может ли быть причина в воздуховоде ...помогите а то швы серые и он не варит а режет большей частью😢😢😢
Laser welding machine are very good and efficient but too expensive for most people especially if it's not your primary job so TIG welding is Ok for me .
Magnifique démo et des explications super,mais ce poste lazer est bien trop onéreux pour moi qui ne soude qu'au tig picotig 200 puls de marque EWM. Merci
im buying the 1.6 kw version door to door 4000 dollar, comes from wuhan area every other option would make price to 6500 K at least my experience buying routers and co asers, english the least issue also my past experience, parts can be purchased from many sources you dont have to stick with one
Ola caro utilizador e consumidor de informação se algum dia quiser realizar seu sonho não hesite em experimentar antes de comprar e trocar ideias com quem já usa para não fazer sua compra em vão pois nem tudo que parece e nem todas são como esta potencial Maquina Welding a Fiber Laser que aqui e representada parabéns ao apresentador Weld HAGO JIBI e empresa que representa NSWel...
Hi sir .I am from India.Can have sir this laser machine in 3 phase types.if have then in how much amps minimum to maximum produce this machine. And sir please explain minimum welding run size and maximum welding run size in mm. How Much are Three Phase Type Xray machine price in USD.Please sir let me reply.
Hi hagojibi, very nice and useful your explanation. and would like to know if there is a special tool for installing the gun welder on a cnc machine ? or we have to install it on a robot for welding straight lines or tubing ?
Untuk informasi tentang mesin las dan periferalnya, Anda bisa mendapatkan jawaban yang lebih akurat dengan menghubungi produsennya. ↓↓↓↓↓↓↓ korea@nswel.com
용접가능한 재료들의 두께와 종류를 알려 주셨으면 합니다 그리고 기타 현장에서 실용적으로 용접을 하는 영상도 필요해 보입니다 우선은 높은 가격과 무게와 부피 때문에 이동이 불편해 보이고 소규모 공장에서 실용적이라고 생각됩니다 휴대 가능한 크기와 저렴한 제품 생산에도 관심을 돌려 주십시오
![weld [HAGOJIBI]](http://yt3.ggpht.com/ytc/AIdro_lButtTy6bwshHHOdUuuc7ktsddm0YgRj2FhqoPUm3aQA=s48-c-k-c0x00ffffff-no-rj)
When comparing welding technologies the way to think about laser welding is that it can penetrate deep but narrow and has a smaller heat affected zone. With settings and technique correct it can provide a faster solution to many welding scenarios. Yes to pipe yes to butt yes to various metals including dissimilar and so forth. First know that it uses light only to melt the metal. There is no arc. You can weld behind glass. Prices are higher but tech is deflationary. If you are a small or medium size fabricator you need to take this serious. Amortise the cost through finance just like you do with your car or other equipment without hesitation. With a shortage of skilled tig welders you might find that a semi skilled worker using laser at 4 to 10 times the speed might make economic sense.
Always on the cutting edge. Never fail to learn something when I come to your channel. And that's why you're the best! Salute, HAGOJIBI!
Love from Turkey. You are my welding master. I learned a lot. Thank you.
Excelente tutorial maestro, cómo siempre, esos cordones tan peculiares, parece que está cosido con hilo, gracias por compartir sus conocimientos y experiencias, un saludo cordial y por supuesto un gran like desde Narón (Galicia)👌🤓😜
I hesitate in buying a laser welding machine ,,,
not because of lack of information
but because of a lack of money ....
I'm glad you made this video. I was starting to think that one cheesy royalty free song was the sound the laser welder makes.
Ha ha
Thank you for the presentation!
You are great Hagojibi!
Greetings from Hungary
Thank you! Good information. You are Top dude in this field.
it is not about lack of information but Mr. Benjamin!!!
줗은 정보 유익한정보
항상 잘보고있습니다
수고하세요 감기 조심하시구요~~~^^
용도와 사용처에 따라 달라질것 같습니다
사실 용접이라는 작업을 많이 하는곳에서는 레이저용접기를 들이는것에 고려해볼 사항일수도 있지만 용접이 주가 아닌곳에서는 아직까지 스틱이나 티그 또는 코어플럭스류가 대세이지 않을까 싶네요 말씀하신것처럼 물론 시대에 맞춰가려면 레이저 용접기 라는것이 존재하는구나? 가 아니라 실무자 분들은 반드시 조작요령이나 원리정도는 숙지해야 한다고 봅니다
I wonder if these will ever come down to hobbyist prices? I would love to have one of these!
I have the money. I'm not buying one. I'm gonna buy a 400 amp Miller tig welder. 😅👍
When your 95 years old maybe.
I sell this,1kw laser welder,$5000
I know itsnot english but you explained itvery well than my professor on our major👏🏻✨
But i would love buying this machine its great and the welds are clean and smooth same with the penetration ✨
I would like to see a cut and etch on the welds to show penetration on different thicknesses of materials.
100% penetration
Exactly thin metal the important for welding dose not bend the material
Lazer for cut
Me gustaria saber es si tiene partes consumibles (lentes, boquillas etc), y la vida util del emisor laser.
i wouldnt b surprised if these became pretty much standard for any welding they can do, n the only "non laser" welders will b for specialty stuff where a laser simply cant/wont work thanks for the video man
Like what can't it weld?
sure kind of boom coming
the practiced steady hand like tig welding requires, being replaced
simple setting will convert beginners to """professional""" welders
Excelente tutorial maestro
I'm welding a long time but thought the laser was a gimmic thanks for showing a good video and I also work with a lot of metals can it do copper and brass as good
all kinds of metals and plastic and glass and ceramic
Thank to see the demoscration of laser welder and to know it's high price.
Greetings from Pakistan,
Thank you so much for your interesting videos. I learned all about Laser welding from your videos. Alas the start up cost of Laser welding machines is very high in my country, otherwise I would want to use it too
as always good content👍🏻
but i will ask again and again....can you please show multipass welding? bead stacking? thick material? pleeaasee???😅
I've never seen any Asian company show that. I own a machine and usually make one pass for what I'm doing. It isn't needed for the light work I do. In the future I'll get some thick steel and do some traditional fillet weld and see how it turns out
I am in the process of buying a laser welder, In two weeks I will have it at my company
Great explanation, thank you!
Джин спасибо за видео! Я думаю применение лазерной сварки не нашло ещё широкого применения, по крайне мере в России, ввиду из за того большей степени применение только на более менее ровных поверхностях! Ещё раз спасибо за твой труд.
лазер может применятся на любой поверхности
@@mybattlefield5854 каким способом. Если по бокам это масса. Если она не примыкает контактами сварки не будет. Я пользовался лазерной сваркой на производстве- применения 10% остальное Тиг сваркой.
@a@aaa@q1
Как раз для китайцев ,они любят все из фольги данный аппарат самое то
Cara pembeliannya mesin las laser gimana??
Di indonesia belum ada
Mucho dos amigos, weleh weleh bleketut ngok pesss bau bekok ❤
Very good video! Thank You.
Thank you for the video. Been following the industry for a few years, and the prices for laser welders actually seem to be moving up, not down. There only seems to be one company in the US that is really pushing a viable solution and that unit cost $25k+. I hope the prices do start to come down because I really want to buy one of these.
Laser welders have been coming down in price around 5% per year but unfortunately the 20-30% rise in just about everything due to inflation and supply shortages have resulted in a net price increase. Prices are starting to come down so hopefully laser welders too. I would love to get one for my shop too.
i just bought a 1.5kw for 6500 usd
@@mrnguyen9893 where and which model?
@@ME-bw3rl Hi dear. We have 1.5KW Welder at $5600. Do you want to have a look?😊
@@Queenaa-2024 sure I come right over :) Where did you order and which model? Do you weld aluminium?
한쪽팔이 레이저용접기인 인간형로봇이나오기전까지 토치를 손에쥐기 편하게 하지 않으면 쓰기 버거울거 같네요.
지그에 셋팅하고 지지직하고 지지는 거면 그냥 알바구해서 해도 되기는 하지만
손기술 요하는거나 현장 파이프용접은 안돼자나..
What you say about welding metal with rust? Thanks for video 👍
Laser set on low power can remove rust.
Las laser kalau ada gup media yang mau di welding. Boleh apa tidak sir.? Contoh join hollow kasi join 6mm, 4mm, and 3mm. Boleh apa tidak ?
Many thanks for informative video and English subtitles. One question: What could be a reason for wire sticking on the end of a weld, and how to solve it, without cutting of forcing it removal from a weld end?
pressing the button repeatedly melts off wire
probably with practice it gets better
Excellent content!!! Very helpful and shows much of the functions. I really appreciate it.
Thanks for your video guide! That welding looks great! How possible to test that welder?
Very helpful
Hola , que metales puede soldar la maquina laser? Espero tenga buen día y gracias.
Merci , très intéressant, vidéo bien détaillée, sallutation de France
I want this machine so much.
Do you have these welders available in the US? I am interested in getting a quote for a 2K version of this machine
And are the menus and documentation fully translated to English?
Could you pls send me an Email? I will make a quote for the 2KW machine for you then.
bro, do you need more? Our company can provide
by the way, miller sure has , but price is way higher
the issue is that most likely you get same chinese laser in different box
but, they speaking better english
C'était très intéressant merci beaucoup pour la qualité de votre vidéo. Salutations de 🇨🇵😎
아연도금 부제에도 용접이 되는지요?
아연도금 각파이프에도 테스트 해주시면 감사하겠습니다.
Thank you 🙏
thank you for your expert advice.
I think there's probably another big advantage, less reject welds and scrap material. I've inspected welds, most in the nuclear industry, and when there's a bad weld there's almost always two scrap components and the material is lost along with the labour and macining time it took to male them. Less skill involved and a more precise process must reduce waste and boost quality.
레이저용접기 진짜 가지고싶다…😢
How much the unit 1500w and 2000w lazer welding
레이저 용접기에 대한 전반적인 설명이나 분석인줄 알고 들어왔는데 nswell사 레이저용접기 광고영상이었네요
Полезное видео !
Tuyệt vời luôn. 💯💯💯💯
И еще...для чего нужен гальванический переключатель???
Good stuff HAGOJIBI, as always, very informative.
Керемет. Рахмет сізге.
Absolutely magnificent
Muito obrigado por informar.
Gratidão!
🙏🇧🇷
Здравствуйте скажите причину появления черно-коричневого дыма при сварке лазерным аппаратом, я проверил длину трубки сделал все как на видео , но нечего не меняет, линзы чистые , может ли быть причина в воздуховоде ...помогите а то швы серые и он не варит а режет большей частью😢😢😢
Capo, capo , que profesor de lujo
Laser welding machine are very good and efficient but too expensive for most people especially if it's not your primary job so TIG welding is Ok for me .
Very good video. Can this be used for welding pipe?
Можно, только если труба будет вращаться, потому что сам пистолет не плохо весит
Very good
I LOVE IT 👌🏻👌🏻👌🏻
2T 에서 12T이상 모제에도 사용가능할까요??
muy buen video ;)
We have TIG, MIG, MAG and MMA. So what will this method be called in the future?
*LIGMA - Laser Inert Gas Mison/Argon*
I know that you require a special laser lens your normal welding helmet is not appropriate PPE.
You need special protection for self and others.
show also how to clean this welded stainless steel by laser...because i saw one time that cleaning is having some difficulties...
Hello what shielding Gas did you use for the welding with filler Metal?
Maybe try bend test or brake test with the laser welding machines.
It makes a good strong clean weld for thin stuff. You'll break the metal before you break the weld
Automotive industry uses laser welding in manufacturing including the large scale welding of body frames, door frames and chassis
Magnifique démo et des explications super,mais ce poste lazer est bien trop onéreux pour moi qui ne soude qu'au tig picotig 200 puls de marque EWM.
Merci
It can weld aluminum?
im buying the 1.6 kw version
door to door 4000 dollar,
comes from wuhan area
every other option would make price to 6500 K at least
my experience buying routers and co asers, english the least issue
also my past experience, parts can be purchased from many sources
you dont have to stick with one
Máquina incrível, ja é sonho de consumo, agradeço o vídeo muito bom e informativo. parabéns!!!
Ola caro utilizador e consumidor de informação se algum dia quiser realizar seu sonho não hesite em experimentar antes de comprar e trocar ideias com quem já usa para não fazer sua compra em vão pois nem tudo que parece e nem todas são como esta potencial Maquina Welding a Fiber Laser que aqui e representada parabéns ao apresentador Weld HAGO JIBI e empresa que representa NSWel...
Pozdrawiam z Śląska:))
i Like it alot!!!
Menggunakan las laser mudah tpi jga rumit
Very useful
Se puede soldar aluminio con esta maquina?
Hi sir .I am from India.Can have sir this laser machine in 3 phase types.if have then in how much amps minimum to maximum produce this machine. And sir please explain minimum welding run size and maximum welding run size in mm. How Much are Three Phase Type Xray machine price in USD.Please sir let me reply.
Tolong jelaskan tentang bbrpa fungsi dari masing2 nozzle nya
Great content. Would a machine like this be able to cut thin sheet metal. Instead of a hand held plasma cutter?
Yes with different more focused nozzle
It's possible to weld three layers approx width 8 mm kindly suggest
Why this shapes (triangle, circle...) are important? Looks like simple line is enough for welding.
Is there a life time of laser head,or whatever part?? Great video,thank you for great introduction
Very nice video. thank you. I have open the Nswel site but it is only in Chinese. Do you know if they are selling to Europe ?
Saya minat untuk memiliki.....saya harus beli kemana
welding machine leser if d bwt ordinary plate welding can or not
is it any good for pipe work
Hi hagojibi, very nice and useful your explanation. and would like to know if there is a special tool for installing the gun welder on a cnc machine ? or we have to install it on a robot for welding straight lines or tubing ?
Sir Can have Useful this machine using in ship building? ??
hello weld / hagojibi, how much are these machines and where to buy them? I've seen some on Ali but they are probably not as good.
We are selling these machines, are you interested in learning more?
Mau tanya, adakah kantor cabang di jakarta Indonesia?
Sirve para soldar titanium?
Gracias muy útil para ampliar conocimientos dime por favor cuanto vale una de esas saludos
Anda beli berapa mesin las lasernya ?
I'd love to know where to get and how much and if its avalabe in single phase voltage
Berapakah harganya dan pengiriman ke indonesia
Untuk informasi tentang mesin las dan periferalnya, Anda bisa mendapatkan jawaban yang lebih akurat dengan menghubungi produsennya.
↓↓↓↓↓↓↓
korea@nswel.com
Que espesores es conveniente soldar , o solo si calibres delgados
Opa,qual manômetro apropriado para ela,estou usando de argônio e não está bom...
보호안경은? 어떤것을 쓰면조와요. 눈이아프다고 하던데
Laser welding is a good technology but the product price is too high, not everyone can afford it
That is super nice machine all 100k of it
용접가능한 재료들의 두께와 종류를
알려 주셨으면 합니다
그리고
기타 현장에서 실용적으로
용접을 하는 영상도 필요해 보입니다
우선은 높은 가격과 무게와 부피
때문에 이동이 불편해 보이고
소규모 공장에서 실용적이라고
생각됩니다
휴대 가능한 크기와
저렴한 제품 생산에도
관심을 돌려 주십시오
What is gas you using