Thanks for the comment Joe!. 👍 yes it's easy to say this needs changing, but it helps when you take the time to understand how it works and WHY you get the problems 👌
@TRUCK TECH UK Sorry, I meant top drawer as in the video was good. Your diagram was fine to me. The diagram works for me because I have replaced a couple of these ad blue pumps and have a little understanding of what's in the system. Keep up the good work on all the videos and the diagrams present and future
Ah, get you now buddy 😂😂😂🫣 I'm a idiot lol 😆 Who hasn't replaced a few of these pumps! The best thing is a repair kit is about 200 quid 😂 saves buying new 👌 Thanks for the words of encouragement 🙏 I should be doing another adblue pump video next weekend, but the latest unit 👌
Hello mate, if the pressure sensor has failed will the pump activate at all? I disassembled mine, but have no ad blue leakage, pump won't start. How can we determine the pressure sensor has failed? Thanks
Hi, thanks for the comment. I have a video here to upload with an Adblue pump pressure sensor failure. If you have a faulty pressure sensor you might find the pressure measurement is a minus figure when attempting to prime through an activation test and its going to give you a pressure sensor fault DTC-wise.
@@TRUCKTECHUK Sadly I have no test equipment, this Noxtronic is on my combine harvester so it's not something I deal with daily. So if I understand correctly, the pump will not prime without a pressure reading? Can I test the sensor with a multimeter? I will try looking for one tomorrow, but I think I won't have much luck here in Bulgaria. Thanks for the swift reply mate
Hi bro. How are you. I want to ask you, if the VGT is faulty , can it be that the exhaust is full with soot from the turbo to the exhaust unit,because whe I regen it till it empty and after 3 days it's about half full .so can it be that
I'm good thanks buddy. The VTG can bring faulty as can the turbo as the arm can crack. You best off checking these if you suspect that they have failed. What I'd be questioning (depending on the exhaust system) is when was the DPF last changed or replaced! You really need some fault codes to confirm your diagnosis
Hi, thanks for the comment. It depends on what is wrong with your pump. It certainly can work out at a fraction of the cost of a new pump if it's just the seals. But you might need a pump or pressure sensor depending on your fault and how much Adblue has covered the components inside. I sell all the components over at www.trucktechuk.com in the shop which is what I use to rebuild my customer's pumps Hope this helps 😎
Unfortunately, I've never stripped one. Daf only supplies a complete unit and I've not changed one for a good few years.......I've looked for some diagrams but again can't find anything 😞. Not what you want to hear I know 😮💨
i can see your very good ive asked before. can i get an engine ecu that would work on any truck. plug and play. please answer me in private message. its not for theft i own 2 concrete mixers. when the engine dies so do my barrel....... is there some way to start the truck just so i can tip the load even tic over/ idle. 22.000 pounds if the load goes off in the drum. im screwed. big problem with the ecu. daf should be exposed for this .. ive seen every truck fail. 64 plate till 2017. not seen a Newer model fail yet.. please
@@TRUCKTECHUK hi yes mx 11... 10.8 both have same ecu. my 66 plate ecu went just after i had new barrel.. i was so lucky. ford and slater had one in stock and fitted within 2 hours. im just waiting on the 15 plate ecu to go.. insurance will not cover the drum any more..
@@matthewhughes4594 my ecu went just after i had new barrel. ford and slater daf in cov saved the day. i know so many ppl that have lost the lot. 20 grand plus bill
Hey mick, Ive been super busy building orders for people on the website, and I've a few other things I'm trying to put together. I've a video here......I need to finish it today really 😅
@@TRUCKTECHUK 1 ov r dafs has a adblue quality sensor fault has plenty adblue av nevergot stuck in to it yet but just wondered if you had it before mte
Yo dude. John here with the mixers. Can i get both ECU programs with the same key frequency. Meaning my trucks will work if I straight swap them. I don’t mind taking ecu off the other truck. I’m just waiting for the 15 plate to stop. Every truck the fail is around 150.000 miles my 15 plate ticking time bomb. ????? I know i can kill the other truck and have daf program it but i want to be able to pull ecu and just slap it on the other. Both mx 11 and same ecu
Yes, the injectors are coded, but they are trim values, and I know a lot of people never bother to code them as they are lazy and if they can't be recovered from the vehicle configuration manager they just don't bother taking the time to do the job properly and adding them back to the ecu
It would if comments were enable for this video! 😂😂😂😂
Excellent 👍🏻
In depth analysis of something so commonly changed but not fully diagnosed. Great information and hard to come by!
Thanks for the comment Joe!. 👍 yes it's easy to say this needs changing, but it helps when you take the time to understand how it works and WHY you get the problems 👌
great video and very interesting and useful information mate .👍
Cheers Steve. I hope it helps you at some point 😎
Top draw stuff once again, thanks again 👍
🫣🫣🫣🫣🫣. The diagrams I do are where i need to make the biggest improvements . Thank you for the comment and for watching the video Danny 👍😎
@TRUCK TECH UK Sorry, I meant top drawer as in the video was good. Your diagram was fine to me. The diagram works for me because I have replaced a couple of these ad blue pumps and have a little understanding of what's in the system.
Keep up the good work on all the videos and the diagrams present and future
Ah, get you now buddy 😂😂😂🫣 I'm a idiot lol 😆
Who hasn't replaced a few of these pumps! The best thing is a repair kit is about 200 quid 😂 saves buying new 👌
Thanks for the words of encouragement 🙏 I should be doing another adblue pump video next weekend, but the latest unit 👌
pump have 10 pins, all connectors i found online have 12
what is going on ?
Thank you.
No problem mauritz👍👌
Good job,
Hello mate, if the pressure sensor has failed will the pump activate at all? I disassembled mine, but have no ad blue leakage, pump won't start. How can we determine the pressure sensor has failed? Thanks
Hi, thanks for the comment. I have a video here to upload with an Adblue pump pressure sensor failure. If you have a faulty pressure sensor you might find the pressure measurement is a minus figure when attempting to prime through an activation test and its going to give you a pressure sensor fault DTC-wise.
@@TRUCKTECHUK Sadly I have no test equipment, this Noxtronic is on my combine harvester so it's not something I deal with daily. So if I understand correctly, the pump will not prime without a pressure reading? Can I test the sensor with a multimeter? I will try looking for one tomorrow, but I think I won't have much luck here in Bulgaria. Thanks for the swift reply mate
Hi bro. How are you. I want to ask you, if the VGT is faulty , can it be that the exhaust is full with soot from the turbo to the exhaust unit,because whe I regen it till it empty and after 3 days it's about half full .so can it be that
I'm good thanks buddy.
The VTG can bring faulty as can the turbo as the arm can crack. You best off checking these if you suspect that they have failed. What I'd be questioning (depending on the exhaust system) is when was the DPF last changed or replaced!
You really need some fault codes to confirm your diagnosis
Here do you recomend to get the repair kit?
Hi, thanks for the comment. It depends on what is wrong with your pump. It certainly can work out at a fraction of the cost of a new pump if it's just the seals. But you might need a pump or pressure sensor depending on your fault and how much Adblue has covered the components inside.
I sell all the components over at www.trucktechuk.com in the shop which is what I use to rebuild my customer's pumps
Hope this helps 😎
As always great piece of advice! Do you have part number for tracks replacement?
Hey thanks for the comment. The number I've used for reference from the supplier is on the track itself, which is 153539-1
Hi mate do you have a teardown on the older model 1818625 adblue pump i may need to replace the filter housing
Hi thanks for the comment. Are you referring to the denoxtronic 1.1 found on the old euro 5 vehicles?
@@TRUCKTECHUK yeah. İ need to replace the filter housing. İs there anything significant that must be done or is it just a couple plugs
Unfortunately, I've never stripped one. Daf only supplies a complete unit and I've not changed one for a good few years.......I've looked for some diagrams but again can't find anything 😞. Not what you want to hear I know 😮💨
i can see your very good ive asked before. can i get an engine ecu that would work on any truck. plug and play. please answer me in private message. its not for theft i own 2 concrete mixers. when the engine dies so do my barrel....... is there some way to start the truck just so i can tip the load even tic over/ idle. 22.000 pounds if the load goes off in the drum. im screwed. big problem with the ecu. daf should be exposed for this .. ive seen every truck fail. 64 plate till 2017. not seen a Newer model fail yet.. please
John, thanks for the comment. 👌 are the trucks the same year and engine I.e mx-11? I might have a solution for you 🤔
Hi, I run a 14 plate daf cf concrete mixer so would be interested in knowing this also! Mine is a mx11
@@TRUCKTECHUK hi yes mx 11... 10.8
both have same ecu. my 66 plate ecu went just after i had new barrel.. i was so lucky. ford and slater had one in stock and fitted within 2 hours. im just waiting on the 15 plate ecu to go.. insurance will not cover the drum any more..
@@matthewhughes4594 my ecu went just after i had new barrel. ford and slater daf in cov saved the day. i know so many ppl that have lost the lot. 20 grand plus bill
where you been mate
Hey mick, Ive been super busy building orders for people on the website, and I've a few other things I'm trying to put together.
I've a video here......I need to finish it today really 😅
@@TRUCKTECHUK could do with picking ya brain
What are you stuck with buddy?
@@TRUCKTECHUK 1 ov r dafs has a adblue quality sensor fault has plenty adblue av nevergot stuck in to it yet but just wondered if you had it before mte
@@mickbusby782 is this after 2017?
Yo dude. John here with the mixers. Can i get both ECU programs with the same key frequency. Meaning my trucks will work if I straight swap them. I don’t mind taking ecu off the other truck. I’m just waiting for the 15 plate to stop. Every truck the fail is around 150.000 miles my 15 plate ticking time bomb. ?????
I know i can kill the other truck and have daf program it but i want to be able to pull ecu and just slap it on the other. Both mx 11 and same ecu
John, it doesn't work that way. Unfortunately, shoot me an email as I've a solution for you
What do you teach?
Hey buddy, thanks for the comment and for watching the video 👌.
Master i have a car problem cf gear box change gears quickly europe five
Aej I can help you, but I need
You to try and explain what's wrong better please 🙏
I don’t think possible because injectors are coded. Please respond what’s the plan. Nightmare you know. Daf is shit
Yes, the injectors are coded, but they are trim values, and I know a lot of people never bother to code them as they are lazy and if they can't be recovered from the vehicle configuration manager they just don't bother taking the time to do the job properly and adding them back to the ecu