Mayflower 680 Tire Balancer Calibration
HTML-код
- Опубликовано: 24 авг 2024
- In this video we get the 15 inch steel wheel and tire mounted in order to calibrate the Mayflower Tire Balancer.
Check out some of my favorite products @ www.btbuildthin...
#Mayflower #YuanMech #TireChanger #TireBalancer #DIY #AcuraNSX #NSX #NSXPWR #DailyDriver #AcuraNSXTypeS
Recording Equipment
Samsung S23 Ultra: amzn.to/478GTL3
DJI Osmo Action 3: amzn.to/3OhqPxY
DJI Osmo Action 2: amzn.to/3ODnnyO
Insta360: amzn.to/3zttkHD
DJI Wireless Lavalier Mic: amzn.to/3Om5ljc
74’’ Camera Tripod: amzn.to/43ZA9MQ
Vehicle Camera Mount: amzn.to/3HhPlLb
Supercar Model: 2017 2018 2019 2020 2021 Gen 2 Honda Acura NSX TypeS Type S
98% of the viewers are not Subscribed. Please Subscribe to help support the Channel! 😊
I've looked at somewhere around a dozen videos about calibrating this balancer and was still unable to get mine to calibrate properly. Then I finally came across yours. Very professional, clear and succinct. Thank you, your video really helped me get my tires balanced. .
Awesome! I'm glad the video was able to help you get this machine balanced correctly. I know the feeling of finding a tutorial that's not very clear!
Bro. Thanks for showing how the adapter actually works 😂 😅
Have you ever run into error code 8 during calibration?
Good video and clear instructions, Thank you.
You're welcome!
Good vids, thank you. In one of your previous posts you had a blue Mayflower tire changer with the ad-ons, I have the same set up. Why did you change out your machine to a different RED model?
Thank you. I sold the previous machine because it only supports an outer clamping for an 18" wheel and even though I added the helper arm, I still needed one more arm to help with an easier install for low profile tires. The new machine I have supports an outer clamp up to 22 inches and also has both helper arms which makes a huge difference. So based on my needs, the first model wouldn't have worked for me even if I added a second helper arm because my wheels are bigger than 18 inches. 😎
Did you use 1 weight and remove it and use it on the inner side or did you use 2, 1 for each side?
I am finding conflicting instructions on that.
Since there is only one weight supplied, you remove it and use it again. I've had no issues balancing after calibration. I'll check even 2 or 3 times just to make sure and they balance out just fine.
do you have to do the calabration every tire or just the first set up?
Just first setup and periodically after that.
so i have this balancer also and gosh did i never read the manual nor know where its at.. lol is this the only way to calibrate the machine? as when i balance wheels i use the middle button setting, with both inner and out sticky weights.. button " ALU 1" im wondering if there is a difference in balance calibration for each setting. I'm wondering if the hammer on weight can be any or mayflower specific included weight. thanks!
I did some digging around and your way is factory for calibration. what I'm wondering is, are you able to weigh the 100g weight supplied? I contacted mayflower and they want 48.50 plus 5 dollar shipping for the calibration weight. 😫 .. that could be a few boxes of sticky weights
Wow, that's a bit pricey for that. Lol. Here is the manual (drive.google.com/file/d/1447yXN1wDNzkY1tcKowMjCaJ9tHk2Zv0/view?usp=sharing), I believe there is another calibration method outlined but the factory one is the preferred method. I will check the weight I have and let you know.
The weight is 100g or 3.5oz. Here are some options for replacement: ruclips.net/user/shortsD_wQFU8LpqM?feature=share
@@btbuildthings I have 3 or 4 buckets of weights. I'm sure I have one in there some where. thanks for weighing it. il make sure to weigh which ever weight I choose.
Hello, what exactly rims and tires are you using? I recall reading somewhere when I purchased it over five years ago that it requires a special steel wheel without a tire mounted to do this procedure.
The instructions says to use a new or slightly used 15 inch steel wheel with tire.
How long have you had the machine and how long do you think it will last?
I've had it for a little over 2 years. I can see this units lasting a long time. I have not had any issues nor have heard of any previous owners experiencing any major issues.
Just a safety concern. Never have clothing with laces. If those get stuck in the machine... You'll do the math.
Fair callot! Thanks! 🙂