Worth noting for other owners. If you use the factory tri-lug adapter it may be wise to remove the thread protector at the tip. It is possible for the thread protector to loosen with continued recoil impulse as the spring wears. This can potentially lock the suppressor onto the tri-lug adapter.
Great set up and great insight into the 1913 rail. Thanks. I'm waiting for the second tax stamp to go through on a APC45 SD. I got a good deal on an Acro and was debating between the Scarlarworks and Unity mounts
oh and beside that over the suppressor rail, I saw they did a limited amount of SD kits for the GHM9 with a vented barrel, suppressor and rail. That would be a cool upgrade! too bad B&T does limited batches of that kind of stuff
@@nineninesixteensixteen2386 ah nice man. that mount looks pretty sweet. I thought about getting that one as well. I finally decided yesterday and got the 1.93 inch Unity
ar15 with a 20 round mag can be sandwiched nicely between seat and console in most trucks. makes for quick access and usually the mag is a pretty tight fit between there.
On the two stock rails you have the plastic tab with two screws holding it on...remove those to reveal another extension slot to extend your length of pull. You need to cut the tabs down shorter. (You're welcome!"😊
@PrayingPanda Don't be dense ! Working at the gun store does not automatically give you an unlimited budget. If that were so, there woukd be lines of people applying for jobs at gun stores.His collection is worth at least 150k
I think they will get more back ordered and you’ll probably pay MSRP or more until the demand finally slows. Another worry I’d have is quality control issues since their main priority will be pumping out quantity
It’s a lot of question marks around this channel hell even grand thumb doesn’t post this many guns hmm. Oh well but I do love the content 🫡🫡 keep posting
You have any problems with the feed lips cracking on the B&t mags? I ve had 4 break on me. They don’t really break off. There’s stress fractures, and open wider. I’ll get a lot of malfs. I ve tried the KCI mags with steel feed lips. Great range mags but Hollow points won’t feed with them.
Worth noting for other owners. If you use the factory tri-lug adapter it may be wise to remove the thread protector at the tip. It is possible for the thread protector to loosen with continued recoil impulse as the spring wears. This can potentially lock the suppressor onto the tri-lug adapter.
I just use a little piece of teflon tape, it's def not coming off.
Great set up and great insight into the 1913 rail. Thanks. I'm waiting for the second tax stamp to go through on a APC45 SD. I got a good deal on an Acro and was debating between the Scarlarworks and Unity mounts
oh and beside that over the suppressor rail, I saw they did a limited amount of SD kits for the GHM9 with a vented barrel, suppressor and rail. That would be a cool upgrade! too bad B&T does limited batches of that kind of stuff
I have the b&t 39mm skeleton mount for my ghm45 it is the perfect height
@@nineninesixteensixteen2386 ah nice man. that mount looks pretty sweet. I thought about getting that one as well. I finally decided yesterday and got the 1.93 inch Unity
Nice set up mine is glock lower
Love the gun. I have the compact version and I am surprised every time I go to the range of how accurate it is. Even with cheapo ammo.
ar15 with a 20 round mag can be sandwiched nicely between seat and console in most trucks. makes for quick access and usually the mag is a pretty tight fit between there.
I have I acro p2 on a 39mm mount for my ghm45, it’s the perfect height
Dope! no explanation needed, i get u.
This is one of my favorite guns I own
It’s awesome! I want to own more B&T
Sick look blaster, you should peep a GHM9 with a Kung Fu Grip
I'm new to your channel I really appreciate your videos has really good content. 👍🏻
Thank you for the support!
6:47 trust me… you ain’t the only one 😂. A suppressed pistol fits so nice in that same situation 🤌🏻
On the two stock rails you have the plastic tab with two screws holding it on...remove those to reveal another extension slot to extend your length of pull. You need to cut the tabs down shorter. (You're welcome!"😊
Good video! Great gun! Only thing B&T I’ve got is a RBS SQD trilug can for my MP5 clone
What gun you DO not have ? You must have an unlimited budget to be this young and to have already accumulated this impressive collection.
He works at a gun store so it's nothing for him to get guns.
@PrayingPanda Don't be dense ! Working at the gun store does not automatically give you an unlimited budget. If that were so, there woukd be lines of people applying for jobs at gun stores.His collection is worth at least 150k
@lhistoireenvideo5877 what's dense is you thinking that he can't simply borrow guns to show off like IraqVeteran8888 used to do.
@@PrayingPanda Are you calling him a pretender ? He claims to own all the firearms showcased in his videos.
Very valid statements made by the both of you lol
Hopefully this will be my pick up🤞.
Sweet!
BAD ASS!!!!!!!!!!!!!!!!!
What do you think will happen to suppressor prices if the dont become an NFA item any more?
I think they will get more back ordered and you’ll probably pay MSRP or more until the demand finally slows. Another worry I’d have is quality control issues since their main priority will be pumping out quantity
It’s a lot of question marks around this channel hell even grand thumb doesn’t post this many guns hmm. Oh well but I do love the content 🫡🫡 keep posting
Thank you!
🥷💥🐦🔥
You have any problems with the feed lips cracking on the B&t mags? I ve had 4 break on me. They don’t really break off. There’s stress fractures, and open wider. I’ll get a lot of malfs. I ve tried the KCI mags with steel feed lips. Great range mags but Hollow points won’t feed with them.
My sub 200k is my normal trunk gun. Sometimes I keep my ar with me
What is the name of the store u work at ?
Rodriguez Robert Thompson Joseph Williams George
Young Laura Williams Michelle Young Margaret
Hernandez Brian Thompson Lisa Jackson David
Miller Michelle Davis Mary Harris Kenneth
Miller Gary Lopez Jose Moore Mary
Moore Lisa Thomas Kimberly Hall Melissa
Smith Steven Thomas Charles Moore Barbara
Jones Charles Taylor Deborah Jackson Joseph
Martin Charles Walker Kenneth Johnson Donna
Taylor Ruth Perez Michael Martin John
Anderson Amy White Steven Robinson Dorothy
Thompson Jessica Moore Robert Thompson Laura
Just get a AR dude
I have plenty of ARs
@@mudgunner yeah right dude you ain't even old enough