Do the 12ft long Classified USS Flagg features WORK??!
HTML-код
- Опубликовано: 6 фев 2025
- I modeled and 3D printed the first ever 12 ft long GI Joe Classified Scale USS Flagg! It took me over 3 months to make everyone's childhood dream come to life but EVEN BIGGER! Subscribe to see more of the most epic toy creations ever!
Want some of the best printing filament and colors I personally use and match so well to our childhood toys? These are also the colors I used on the Classified USS Flagg. Get Paramount 3D filament now at the links below!
Paramount 3D Game Cartridge Gray
amzn.to/3zsqNjj
Paramount 3D Prototype Gray
amzn.to/3U1w2xF
Paramount 3D Stealth Gray
amzn.to/3MXv3dP
Paramount 3D Enzo Red
amzn.to/3Y3aSSd
Paramount 3D Egg Yolk Yellow
amzn.to/47AaCNq
Paramount 3D St. Andrews Green
amzn.to/3ztDf2b
Paramount 3D British Racing Green
amzn.to/3TFAaD3
Paramount 3D Autobot Blue
amzn.to/4eeaEwZ
Paramount 3D White
amzn.to/3XQwH7k
Paramount 3D Simpson Yellow
amzn.to/4ezMT23
As an Amazon Associate I earn from qualifying purchases.
My son was commenting the entire time on how yours looks better and more detailed than the original.
@@PosixBillie Please tell him thanks! That is SO awesome! Made my day!
Awesome. Back when GiJoe figures came out and the jets and helicopters were appearing, us kids used a couple of 2X12x16 planks and my dad cut it into the shape of a carrier deck and we painted it primer gray and striped it. We made a tower with portholes and walkways around it. It was in my backyard forever. We had so much fun with it.
That's awesome! What a great memory! 🙏
Absolute Perfection!! I can’t stop watching!! I want one! 😅
@@jackmckenley5342 Thank you! Good thing is I'll have the STL's up for sale soon 😁!
Well done! No stone left unturned and a lot of love went into bringing this project to fruition.
@@Isles2219 That's right! I spent countless hours pouring over reference pictures. My goodness, I can't even begin to tell you how many hours I spent capturing every little detail. Thank you so much!
Absolutely mind blowing! You should do a video with the figures too!
Thank you! I just filmed an EPIC battle scene with Classified figures. I'll edit it and get it up later this week. I also did one with ARAH figures I'll get up next week 😁
I think my friend @it'sChad would love this, if he saw your videos. He a big Gi Joe fan of the 3.75 gi Joe figures and 4 inch modern scale. Great video
I think he would too! Even though it's Classified size, the nostalgia is incredible!
This is a beautiful thing brother. A++ work!
@@danwesleywhite1995 Thank you so much! Trying to get that good grade 😁!
I’m just completely blown away by the level of detail. It really is identical but bigger. AMAZING!!!😍😍😍
Thanks so much! 3 months of poiring over reference pictures and modeling every little detail. Glad you enjoyed it! I hope it brought back some good memories!
Seeing the OG Skystriker on there made the scale stand out and also like it belonged this size to begin with. Again fantastic job!
It really does look like they belong on there. They are in very good scale with them! Thank you!
I've watched all three videos. Extremely well done! I hope people truly appreciate the skill and craftsmanship that you have to make this possible. If you want to print and sell one at my booth at JoeFest next year, let me know!
I will definitely think on that Chris! There have been some people asking about raising the Flagg and I always refer them to you. The process should be almost identical just bigger. Thank you!
The amount of detail in this is insane. My buddy had the original back in 87 this just magical. How did you get everything to look this clean? It doesn’t look 3d printed it looks factory made. Did you print the labels also? My god man this is the coolest thing I’ve ever seen.
@@JameyMcFarland One of the biggest ways was I modeled it for the process I used, FDM printing. I've been an engineer for a long time and have used 3D printers for ages lol. The "stickers" were all 3d printed, even the deck stickers are 3D printed in 😁. I'm so glad you enjoyed it! Hopefully it brought back a good part of your childhood!
@@RowdyToys-ki9qf I would say you have mastered 3d printing. Now my mind is running wild with what you make next!
@@JameyMcFarland Oh just wait! Now it's really getting ready to get crazy! 🤣
every time i see it im awed by how cool it looks a true grail 😅. can't wait to see some planes and figures on it. wow 😮
I really appreciate it! You always have kind words! This is the week for the epic battle of the classified figures video and next week is the original GI Joe figures battle!
Awesome job! Take pride in a job well done my friend.
Thank you my friend! Glad you finally got to see it!
Mate this creation of yours blows my mind. Insane good. I can't wait to see some birds and crew on her deck!!
Thank you very kindly! There's a whole lot of love and work in this project that's for sure. I have a video coming out this week with an epic battle of classified figures. I even have one next week coming out with original GI Joe's having a battle!
People want to see classified figures on it. Show it compared to original figures too. Let's see how they look with the controls and doors.
These first three were about showcasing the Classified Flagg. But good news is there was video already shot of an epic battle with Classified figures. It will be posted later this week. Next week will be another epic battle but with ARAH figures 😁
You covered all the details. Hope you don’t mind if I mention you in the future in my videos and your US Flagg. It is in Spanish but thanks to technology, Subtitles exist!! 👍 Great video!
Absolutely and thanks so much!
impressive!
Thank you so much!
Great job! 👍🏼
Thanks so much!
Looks great. Should throw some Joes in there to really make it come alive. It will look really cool with the Dragonfly siting on its deck. Hopefully they make some more GI Joe aircraft, like the Skystriker or Conquest.
Thanks so much! I have a video coming out later this week with classified figures having one epic battle! Bonus points... I also have an epic battle scene with original GI Joe's coming out next week 😁
Man o man…she’s a beauty
@@JonesBoys79 Thank you very much!
i can't even imagine how much it would cost if hasbro did this. they again i can't picture Hasbro ever doing this lol.
It would be crazy expensive! I don't think they will ever do it. I agree with you.
The HASLAB for this would be 2k at least, lol
That's probably about right! 😭
Build a figure... USS FLAGG wave bwahahhah!!!!!
@@darylderntl421 funny it would take so many waves and figures if the line lasts enough to finish it lok but i luke your idea
Amazing work. It's every bit as impressive as I was hoping to see.
@@DownSouthSeven7 Awesome comment! I'm glad it lived up to the hype! Thank you!
too kool!!!!
Thank you very much!
Been sharing these videos with my classmates for about a week, amazing amazing work. How did you first approach such a large project? Did you scan parts or modeled them from scratch?
Thank you for sharing and appreciating all of the hard work! 🙏 I do a ton of research before I begin. I always become an expert in the project I take on. Next I begin with the base laywr that everything will build around and in this case it was the flight deck. Everything was modeled from scratch. I only started with a few measurements. I knew that the original one was 7.5ft long, 3ft wide, and 3ft tall. All of it was done by eye in Solidworks. I don't own a scanner, one day I might but I haven't found anything that I absolutely have to have one for. Thanks again! I have many more projects coming up 😁.
@@RowdyToys-ki9qf awesome! Thank you so much for sharing that info. Super excited for what’s next!
Thanks! Won't be long, already at work on another project 😁
Hermano tu trabajo es una cosa de locos...!!!!! Yo Joe 🇦🇷🇺🇸....!!!
@@MARINJOE87 Thank you so much!
I love it! But I am afraid to ask how much it cost you to make this masterpiece...
Thank you very much! It really wasn't that bad. I don't have the final figures yet because I was so focused on finishing it. I'll get a video up in the next little while and talk more about it.
GREAT VIDEO NICE WORK HOPE YOU PLAN ON MAKING MORE CARRIERS TO SELL IN THE FUTURE
Thank you so so much! I will be selling the STLs very soon. I have so many projects backed up right now that I honestly don't think I could print another one. The good news is there will be some more really cool toys coming out soon!
I would love to have this its so amazing
Thank you so much! It is a beast!
@@RowdyToys-ki9qf your welcome
Yo Joe!!!!!!!!
💪 Thank you!
That looks awesome.
What do you think is you merged these 3 playset in cad to make ultimate Cobra Fortess.
- Kenner Death Star playsets
- Terror Drome
-Cobra Mountain
Thank you! That would definitely be wild!
my God, take my money 😂😮
It's definitely wild!
I’d like to hear some of your tips for 3D printing, i have a printer but not too knowledgeable with it
@@scottblanco5991 Absolutely! I have a video coming up soon that is really going to help!
I wonder what the retail price would be if Hasbro produced these for Classified’s. I know it wouldn’t be as detailed as yours is.
That's a great question! Whew, I don't know but I bet it would be expensive. Thanks for the kind words!
Remo Williams got skills...
Thank you so much!
How much did this cost in material Sir? Also what program was used to designed this?
Thank you for your service🫡🤙🏽
I was so focused on trying to get this beast done that I haven't had time to go back and tally everything up. I'm going to do it soon and make a video and show a lot of the processes and thought patterns that I have. I use Solidworks and have for many years. Thank you and I really appreciate it!
when are the sky strikers coming??? 😃
I have some crazy stuff on the way! 🤐😁
@@RowdyToys-ki9qf looking forward to it!
YES!!!!! How many Hours, Cost of Materials?
Thanks! About 54 rolls and 71 hours for the 12ft. Considerably less if printed in 3.75" size.
Wow I just got a Flagg and I want to make it longer and wider so how do I do this and also want to make a second level
It would be hard to do that with an original but there is a gentleman named Chris Dortsch ( I hope I spelled his name right). He has a book on Amazon called Raising the Flagg. A lot of people have done this and it does not require any modifications to your original toy. It's a really cool idea to do that! He is also on some of the Facebook groups.
@@RowdyToys-ki9qf I all ready got his website gijoeburg sent it to me but man I love your Flagg now is your superstructure fit 3 3/4 figures?
But thank you anyway
It's a little big for them but I'll have a video up next week and you'll be able to see the classified Flagg with 3.75 in figures in it.
Thank you very much! This is only the beginning of the crazy stuff I've got in the works
Is there a place to purchase your STL files?
I've got to open an Etsy store. I will be selling them though. I'm also going to be making an assembly guide. Thank you!
What is the brand and model of your 3d printer/s? Do you use 1 brand/ model?
I use only Bambu Lab P1S' and A1's.
How much to charge build for customers
It would be $6000. Thanks!
But does it float???
@@carlosfuentes9928 🤣🤣🤣 Nope! Thanks!
I'm guessing it doesn't scale well. Why else would he make 4 videos on the thing and not show it with a single classified figure in any of them. I thought for sure in the "Does it work" video we would have seen it but alas, sadly no. Come on man, show it with some figures on it. I mean why would you make a classified scale Flagg if you don't have any classified figures?
Yeah, I think it's probably a more suitable scale for 4 to 5 inch figures. Still cool to look at
Well I have a great answer for that. These videos were meant to be all about the work I have done on the Flagg and showcasing it. But the great news is I've already filmed an epic battle with classified figures and I will get it edited and posted this week! It will be a really cool video 😁!
It scaled for the 6-in figures. These three videos were really meant to showcase this Flagg. I scaled it based on going from a 3.75 in figure to a 6-in figure. I do have one epic battle video coming up this week. It shows 6-in figures on it. I've already filmed it and will be editing it this week and posting it later in the week. Thank you!
You're not planning preorders on this are you? LOL looks great!
Thank you! Sorry but no sir. The good news is that I will have the STL's/ 3D models available on my Etsy starting at 8pm EST tonight 😁.
rowdytoys.etsy.com