Looks so good! I originally put self tapping screws on my front lip but lost a few over time and replaced them with nuts and bolts. Also if it's cold outside, using a heat gun on the adhesive helps a lot!
Hi Fritz, I recently discovered your channel after buying a 2015 435i XDrive Gran Coupe. I have absolutely been loving your guides because I bought the car with a decent number of miles on it and I want to jump on the preventative maintenance. Absolutely loving your videos, super helpful guides on both potential mods I'd like to make as well as keeping the car in good shape. Please keep it up!
Not bad splitter, but I prefer the cleaner look of the lip that integrates nicer with the two holes you have at the front. You should also check out Diamond Splitter bumper inserts for the F22. I was expecting you to get a M2c bumper designed specifically for the F22, would match the hood :)
I like that design that curves up too, would have been better for clearance. The M2C bumper so something I have to save up for that one is pretty expensive lol. I'll take a look into the splitters, thanks for the suggestion
Hello, not sure if you're still active, but at 4:20 the part which you're removing the screws from, which basically connects the bumper to the splash shield - would you happen to know the name/part number of it? I lost it so my splash shield came off and I need this "spacer" part to connect the new splash shield.
I have been looking for a longer thicker carbon fiber lip without using long steel prongs. THIS MIGHT BE IT!! The common OEM front carbonfiber lip designs (M235i & M2) don't seem attach out as far. Anyone seen other unique designs please list the names below! 🙏🏼😇
DUDE, dont put your fingers so close to the knife, your loose them, especially as your pressing hard I cut the tip of my finger off doing the same thing, trust me cutting your fingertip is EXCRUCIATING pain
Looks so good! I originally put self tapping screws on my front lip but lost a few over time and replaced them with nuts and bolts. Also if it's cold outside, using a heat gun on the adhesive helps a lot!
Thanks for the tips! I hope you don't mind that I pinned your comment, I think you shared some very valuable information 👍
Hi Fritz, I recently discovered your channel after buying a 2015 435i XDrive Gran Coupe. I have absolutely been loving your guides because I bought the car with a decent number of miles on it and I want to jump on the preventative maintenance. Absolutely loving your videos, super helpful guides on both potential mods I'd like to make as well as keeping the car in good shape. Please keep it up!
Thank you! You're going to love your car especially once all the preventative work is done
Not bad splitter, but I prefer the cleaner look of the lip that integrates nicer with the two holes you have at the front. You should also check out Diamond Splitter bumper inserts for the F22. I was expecting you to get a M2c bumper designed specifically for the F22, would match the hood :)
I like that design that curves up too, would have been better for clearance. The M2C bumper so something I have to save up for that one is pretty expensive lol. I'll take a look into the splitters, thanks for the suggestion
Looks so aggressive .. ideal 😝 great content as always, Fritz.
You always making amazing content thank you for staying consistent bro! #Fritzgang
Thank you so much for alwys showing your support #syberrgang
Are you able to take off the sticker?
Where did you get that hood, looks amazing 😮
Thanks!
Full Install: ruclips.net/video/URLDtrrtXaA/видео.html
F22 GTS Hood: www.suvneermotorsports.com/shop/f22-f87-gts-designed-aluminum-hood/?ref=vroomtuber
F30 GTS Hood: www.suvneermotorsports.com/shop/gts-designed-metal-hood-f3x-edition/?ref=vroomtuber
Hello, not sure if you're still active, but at 4:20 the part which you're removing the screws from, which basically connects the bumper to the splash shield - would you happen to know the name/part number of it? I lost it so my splash shield came off and I need this "spacer" part to connect the new splash shield.
amazing video bro!!!
Thank you
Lip looks great bro great video 🔥
Thanks man🙏 Your car looks 🔥
@@FritzRamos appreciate you bro! Yours as well 🔥🔥
Is the decal on the lip painted on or a vinyl sticker? I want to order but, don’t want the logo
It's a sticker. It can be easily removed
Another great vid 👍🏽 can't wait to do mine
Thank you. Hope your install goes well
Great look.
Thanks Thomas. Were you able to find someone who ships to Canada?
@@FritzRamos no didn’t follow up. Just spent on new/used winter tires. Amazingly difficult to find. Will reach out to your vendor soon
I have been looking for a longer thicker carbon fiber lip without using long steel prongs. THIS MIGHT BE IT!!
The common OEM front carbonfiber lip designs (M235i & M2) don't seem attach out as far.
Anyone seen other unique designs please list the names below! 🙏🏼😇
I know what you mean. So far its held up well
Great !!!! nice
Hey bro u still with WFG ?
Yup
Do you have this Lip for bmw f23 220i and gloss black color?
And i need an european paper for switzerland it where good if you can help me organize it to do legalize it here in switzerland
im on my 3rd lip and just resorted to $90 cheap ones off ebay tbh xd
cheap lips are the way to go 🤷🏻♂️ i’m on my fourth one lol
I've herd they're really durable though. What's your experience?
What’s up with the thumbnail??
DUDE, dont put your fingers so close to the knife, your loose them, especially as your pressing hard I cut the tip of my finger off doing the same thing, trust me cutting your fingertip is EXCRUCIATING pain