Did I Waste $1500 on a 50W Laser Cutter from China?
HTML-код
- Опубликовано: 7 авг 2024
- TL;DR: Nope!
There are some things I would do a little differently when purchasing my 50W laser from eBay. The main thing...look for a Ruida controller.
Check out some specific projects/use cases that this thing can cut: • What can a $1500 50W C...
My complete laser rankings: • The Best Laser Cutter ...
50W Laser (eBay): geni.us/NsQiB9Q
50W Laser (Amazon): geni.us/PvUd
Alphawise C10 CNC - geni.us/uBkcNy
15W Ortur Laser Master Engraver - geni.us/xhqAGyI
15W Ortur Laster Master Engraver 2 - geni.us/yhIh
----
👨💻LEARN 3D MODELING
Take my free course: bit.ly/3062sLV
Furniture Design in Fusion 360: bit.ly/3eSa2yd
🖥Build plans and more: www.makeorbreakshop.com
💵Support the channel on Patreon: / makeorbreakshop
🎙Listen to the podcast (Make or Break Show): www.makeorbreakshow.com
🌄Daily updates on Instagram: / makeorbreakshop
🤖FAVORITE ROBOTS (affiliate)
Favorite Laser Cutter - geni.us/KrbIO
Budget Diode Laser - geni.us/W5yj
Budget CO2 Laser - geni.us/kYTy
Engrave Metal - geni.us/KHK2
X-Carve CNC - geni.us/ykswx4
Favorite 3D Printer - geni.us/qHrta
Resin 3D Printer - geni.us/d8JGVEw
Vinyl Cutter - geni.us/oFWm
🛠️TOOLS (affiliate)
Table Saw - geni.us/sFzQ
Miter Saw - geni.us/h8YkN
Band Saw - geni.us/MkqUZ
Impact Drive & Drill - geni.us/mfAysU
Drill Press - geni.us/dNyI9h
Planer - geni.us/yysAwMd
Orbital Sander - geni.us/kOil
6 in Jointer - geni.us/600Mv
Welder - geni.us/PGMBqN
Kreg Jig K4 - geni.us/ApW1r1
Plunge Router - geni.us/iRGoj
Jack Handplane - geni.us/ublnoRQ
Combo Square - geni.us/BkCt5n
Woodpeckers 6 in Square - geni.us/LMYqdh
PFEIL Marking Knife - geni.us/BUcKI
Handsaw - geni.us/h9sq04K
📹 CAMERA GEAR (affiliate)
Main Camera - geni.us/9nlsv
All Around Lens - geni.us/gfEnA6K
On Camera Microphone - geni.us/O3McpqZ
Rode Wireless Kit - geni.us/NZQsVFA
Diety Lav Mic - geni.us/sHyc99Z
Tripod - geni.us/x0dRK
Video Switcher - geni.us/h5nKZN
Key Light - geni.us/fNik
🎙PODCASTING GEAR (affiliate)
Microphone - geni.us/QpeqB
Cheaper Microphone - geni.us/3HADRSA
Boom Swivel Arm -
Audio Interface/Recorder - geni.us/hE656
Cheaper Interface - geni.us/OZqa 
Хобби
Also you want to liberally silicone the high and low voltage connectors. Pour it right down the little white tubes covering the connections. If not it can arc to the box. And never go near the high voltage end when laser is powered. If you have to adjust the tube, do it carefully from the low power end if you are going to keep laser main on while adjusting.
Would have been nice to see it actually work. the 4 seconds of sped up video didn't show much
Excited to see what you make with this. I'm interested in getting one of these too.
Please contact me，WhatsApp number：0086-18554018893
What!!!! I just realized you edit the Making it podcast...... Mind blown. keep up the great work
Guilty
5:44 That white part is not for the water it come’s with the air pump to attach multiple pipe’s for delivering air to an aquarium or aquariums 😁
Hey! Do you still like this Laser? Would you get a different laser? Like if you could do it all again. what would you get? We are seriously thinking about adding a Glowforge to our lineup, but they are pricey!!!
i need help!
How to illuminate the main screen on the machine? she totally disheveled us, we do not know how to brighten up, thank you
i use to have a Universal 30 watt M25 laser engraver and just bought
Orion Motor Tech 50W CNC CO2 Laser Engraving Cutting Machine, 110V Laser Engraver Cutter and hope it will be as easy as the Universal.Thanks for your video.
How did it fair? I'm used to working with the Universal engraver as well. Just got the Orion this week, I'm a little overwhelmed with how it's going to work
Interesting to see laser cutters, at work we use a 6kW laser but it's used for welding. I love laser and it's fascinating to see it work.
Without the grounding wire going straight to ground (I literally ran it out a window into the ground) I experienced a little bit of a tingling feeling if leaning against the laser. Putting in and taking out things from the laser, my hand would touch the edge of the machine, resulting in tiny electric shocks. The laser was connected to a grounded outlet. It all stopped after grounding the laser properly.
You might want to call an electrician to chek your grounding. It also is very possible that it is not actually grounded, but done with PE-N connection, in which case the ground is floating under load.
Thank you for the information
What did you buy that laser for, and what else can it be used for?
It's a considerable money investment, but it's an even greater space investment, and most people literally might not have where to put it.
The office reference 💯
have you heard/tested the GWEIKE laser? I dont have the space and was looking for something like the glowforge. Great channel...You have been very helpful..thank you
Can you use it to cut metal because i am looking for one to cut names in metal to make necklaces tnx and great video❤️
did it print right out the box or did you have to adjust mirrors and such??
hello, a question, but do you use lightburn software because it is the only way to communicate with the laser machine? are there other software that can communicate with the laser? nice video compliments
can you run this straight from corel draw with print driveR?
So I have a question? how does this laser gets delivered ? is it UPS, FEDEX? and does driver call you before arriving with your laser?
Enjoyed the video. We bought a laser cutter too. Few videos of it in action on my own channel.
Thanks for the info
I want to cut glass. Both clear and colored. What laser machine would you recommend? Liked and subbed!
Thankyou very much for your answer. I was thinking 2 buy one but only to cut Aluminium. Now i have to find something ealse.
What's the thickness? Maybe I can provide one.
Please contact me. whats app number:0086-18554018893
hello sir , we are top selling laser machine manufacture in China,please contact me,whats app number: 0086-17820602094,Email: y.huiping@dapenglaser.com ,thank you !
I have the same laser with the other controller and have used it for more than 3 years with no problems. Very happy with my purchase my only concern was the software that came with the machine was a bit flakey with a virus on the disc! Used with Corel draw it's and excellent machine in my workshop.
Nick hey Nick where did you bought your laser?
Hello.. I have similar Laser engraving machine. I have problem last few days with cutting acryl glass and with plywood... It didn't cut files that it cut a day before. His puls dot is ok, It pass through material, but in files doesn't. Can you help me what to do? I have allignment mirrors and changed a water and clean lens. And I have no ideas anymore what to do.
I haven't been able to find a video of it rastering, outlining, and cutting. Can you demonstrate more how that works?
Hello Ms Rieger, my home page has a more detailed overview and cut video if you need the original.We can exchange whatsapp:+8613127135107. and I can send you some detailed videos you need
Great vid as usual!
What's the maximum thickness of steel that it can cut? Thanks 😄
it doesnt cut steel, fiber lasers would. this can only scratch it.
I know it old vid but can you answer my question ! does it cut acrylic ?
i have an 80 watt with the ruida controller, i am running corel draw x18 and when i send files over using the plugin that came with the laser it does not fill in the text. The Laser seems to only want to "cut" objects out rather than engrave them. I did find a setting called "scan" and "cut" and changed it to scan, which then filled in the text and designs rather than outlining them but even after that the quality of the engraving is not very high. id give it a 70 out of 100. Ive tried re aligning my mirrors and they seem to be pretty straight on. the mirror i have the most issue with is the one at the tip of the laser head. i have issues getting it to come out of the tip of that cone that covers the end. the top adjustment is not very adjustable. If you have any advice id love to hear back from you because as of now the laser sits here doing nothing. its a $2000 desk.
Sir I need to buy a laser cutting and engraving machin up to 1500 max. What machine do you recommend?
Also do you have any idea about 3d printer good machine the same price max or less
OK I'm old and just getting in to lasers and what they can do when I etch glass I have like holes in the burn the coating I'm using is cold galvanizing compound. What could it be ? glass is cleaned very good but 3 times now this has happened trying to find out why the holes in the letters.
Hi, does anybody here know if there is a way to get this cutter in Europe? In the links provided Ebay and Omtech doesn't ship outside USA and Amazon doesn't find this product at all.
When you do a cut, is there like liquid forming underneath the material? I am getting liquid from cutting acrylic and mdf. only underneath the material. Thanks in advance
Yep! That is basically the heat from the laser melting the material underneath. A lot of lasers have a honeycomb bed so there is open air underneath the material to help offset this. Since mine doesnt have this you could either put some honeycomb on top or just add a few riser blocks to the get the material off of the bottom of the bed.
You have a few things wrong then, first is focus, so if your cutting say 3mm and your getting a problem on the last 1mm then lower focus 1mm. Your air assist would push debris clear of the cut, also the last thing is to turn speed up a bit as the laser is to slow and melting the burr. good luck
The question i have. Are you still using this machine. Or how long did you use it. Would you buy it again. I bought a used one 2 1/2 years ago never used it. Goi g to try it.
Can it cut stainless steel sheet metal? About 1mm thickness?
this looks like its in your garage, if its not heated i recommend draining the tube or using antifreeze during the winter unless you like buying a new tube.
Where was this comment 2 weeks ago!!! Waiting on a new laser tube right now
I'm not sure if I misunderstood sth but if I buy a Laser with RUIDA I can use it with Lightburn? Thanks for your Video!!
Will this laser run off Windows 10 on my pc? Windows 10 is not listed.
What did you pay in taxes and duties and so on getting it to the states?
Good info in this one!!
What size honeycomb bed would fit it? everything is cm not inches?????
can you make electrical tags for outlets with this could you make a video
please information and price
Awesome channel!
Cant wait to see what you do with it!
Hey, awesome video!
Are there any 'how to put this thing together/set it up' videos for this specific machine?
Thank you for the tip about the Ruida controller. How does the controller you have work? Is it compatible with any software at all?
I’ve only been able to get it to work with Laserburn which it comes with. I know the developer for Lightburn will eventually support Leetro, but not in the near future.
need some major help i have laser machine that uses coral drw we havent been able to work out how the laser actully pin points where to laser it kinda looks like yours but is different on the panel
Draw a box around you object to laser. Set it to hairline width and color outline of the box red.
Hi, is this Machine loud when using? Thanks :)
The build quality looks surprisingly good. How well does it cut plastics? Also were you hit with any large duty or customs fees?
No large customs fees for me, be sure and buy from a US-based distributor if you're going eBay to help avoid those.
@@makeorbreakshop ah ok, thanks!
Can I use it to cut thin brass sheet ?
Hi there cud you do video on how you can cut larger wood with doors and stop and starting laser why move wood thank you love you videos mate
Thanks for the video - What engraver machine would you recommend for Cookware "Pot and Pans"??
I recommend fiber laser marking machine, ruclips.net/video/La8CeFi5JvA/видео.html, if u need, u can contact me
I have the same laser cutter but I have some problems calibrating the mirrors. The laser keeps cutting at an angle. Does anybody have any tips for me?
in your video you're shown with a macbook but it says it doesn't support IOS. so do use a different computer for projects? also can you purchase insurance on the item when shipping? thanks
If you get the ruida controller with the Light Burn software then you can use a Mac. In my case I ran it through another PC. The MAC was easier to use in the shot ;)
does it cut glass?
Hi there! After watching your video I made up my mind and decided to get the same laser. Thank you for making this video. By mistake I messed up the vendor settings of the machine. Is there anyway you can share with me the the .RDVSet data parameters of the machine? I like your videos! Thanks!
I had something similar happen and wound up having to contact the company and they were able to walk me through doing a factory reset.
Hi Jaun, Would you still recommend this machine? Thinking of purchasing one, or save some more and maybe buy a good secondhand Gravograph
Juan any updates
@@SirMrShanks yes all good now. Machine is working great. Thanks
Im looking to customize firearms so there will be some polymer and metal etching. Will this wattage do the job?
R Loco for metal it’s more of a frequency thing vs wattage. Check out a fiber laser for metal etching.
How tall is the table that you have ur 50W on top of?
I also purchased a 50 watt, same color etc. but the other type control panel. will look into the water chiller. Also I purchased and hooked up a much stronger exhaust on the advice of Russ Sadler in the UK. He has 100s of videos on this model laser.
Yes I've been loving his stuff!
Good videos by Russ for sure Jay - thanks for the redirect ;)
Dear Mr. Jay,
I am Jennifer from Jinan Xintian Technology Co., Ltd, China. Established in 2004, it has become a top laser cutting machinery manufacturer, having exported to 120 countries around the world with 10 years of exporting experiences.
We have good feedback from customers. Pls kindly leave your email, I will send you details.
Jenny Liu, XT Laser
Email: xintian115@xtlaser.com
Whatsapp: +86 15201299761
Jinan Xintian Technology Co., Ltd
Website: www.xtlaser.com
Your Best Laser Cutting Machine Supplier From CHINA
How long does it take vs smaller engravers
Bro dope content. I'm thinking to buy one maybe this one.
Do you think it's good idea to put it in apartment? Will neighbors hear the sound of this machine? I live in private house so only neighbors upstairs. LOL
Thank you!
Please contact me. whats app number:0086-18554018893
Fobius8 same here
Rykon is what the website says it comes with now. Is this the same, better, or worse than Ruida?
What is the maximum thickness it can cut ? And can it cut any metal materials ?
No metal cutting (maybe etch on anodized aluminum). I'm guessing 8mm plexi, because I used ul laser 80w and 12mm was pushing that machine.
how big is the working area
Do you sell this machine? I need another one like this
What was the warranty that came with it?
Great video. Question, I'm looking to get into annealing items like rings made of tungsten. What kind of a laser would I need? This is a 50w laser which is pretty strong compared to what's on the market
You wanna mark on the rings?You need a fiber laser
Please contact me. whats app number:0086-18554018893
hello sir , we have laser marker,please contact me,whats app number: 0086-17820602094,Email: y.huiping@dapenglaser.com ,thank you !
Would love to know what materials and thickness it will cut and engrave .
This is Colin from Oree Laser in China, which is a professional Laser cutter /Laser tube Cutter /Laser Welder manufacturer. Kindly add my WhatsAPP/Wechat number : +8618668921695 . or send mail to : sales079@oreelaser.com , I'll share more info to you .Our web: oree laser.com
Stay Healthy & Best regards !
Sir Howmuch price this machine ?
If You want upgade a protective glasses use kapton tape.
is this machine compatible with a MAC computer?
There are so-o many companies out there offering laser machines. The same type/size/performance and teere is almost $3-$8k difference in price. How do you know what to buy .. price .. laser wattage .. and most importantly, customer SUPPORT for equipment & learning?
Can it cut metal?
Lets see some engravings you did? I wonder how good the dpi is on this when ur engraving engravable stock? Lets see your vent setup? How cold does it get inside ur garage how do you keep the water from freezing?
is this machine can laser mark in to metal like alloy or stainless?........ thanks
Fiber laser marking machine can do it
I’ve been doing a lot of research on this machine and I’m pretty sure I’m going to get one but the one thing that keeps changing is how powerful the laser is any fruit from 80 W to 50 W does anyone know how powerful it actually is?
光纤激光现在都80000w了
OK...I HAVE the orion 50 watt laser machine. Been sitting for almost a year now. I'M so confused on how to operate it. I have a 3d printer but its way different than a laser machine. I have INKSCAPE program for this machine but...setting everything up...and learning HOW to use the machine...well...IT'S confusing. I don't know if it works on 1 program or 2 programs or if the vector and raster imaging is within the machine or in inkscape or another program and WHERE to design the stuff i want to design.. or what program to use. SO for a year now...I've been trying to find out information on HOW...to set this thing up and get it going. i'm about ready to kick the damned thing..lmao...like i said...it's frustrating...i can rebuild a 3d printer but can't seem to figure out... what I do..... first on this thing. HELP...if you can...i would appreciate it..or maybe even do a quick video on it...on HOW to set it up and run the software...it would be helpful to a lot of people. thanks bud. theres a british guy on youtube..but that shit is LONG and drawn out. PLEASE PLEASE PLEASE Im Begging you...HELP!...do a video....a slower version..maybe..drink less coffee...lmao..you did fine on this one.
I have your exact model (with the same keypad) and cannot, for the life of me, get it to find files on the "Udisk". Can you describe your method for getting print files onto the machine?
Yeh the U Disk is hit or miss for me, I connect it by USB to a computer and transfer from their software.
@@makeorbreakshop Thank you for your prompt reply. I am not looking to you for support, but I have not managed to get mine to do *anything*. Can you please describe in more detail what you do? If I use their printer driver, from their "LaserCut2017" program, the jobs just disappear from the queue. When connecting via USB, I don't see the device as a drive to move files onto. I am sort of shooting in the dark, here.
It might make a popular video... :)
I never could get 2017 to work. Mine came with an older version of the software and I was able to get it to connect using the cord that came with it.
@@makeorbreakshop Yep, that's about where I am. I can get some basic control using lasercut6, but 2017 has been a bust, and neither has actually let me print anything. (Sigh)
Is it still a good buy ? With the different controller?
Totally! Mine is working great, I just have to do a little workaround because of the controller.
The comb thing is for your fish tank - the pump is a fish tank aerator pump and that is the outlet for lots of bubbles. You don't need it.
OMTech 100-130w or FS PS24 pro?
How dangerous is this thing in terms of fumes and the laser blinding you? I know you said that if the glass is down, it should be safe, but I still would worry about that. Thanks..
There are exhaust hoses to you can connect and direct fumes out the window
Can I engrave and cut at the same time without Ruida controller?
It will do it in different passes but can still be within the same operation.
Can it engrave round Tubing?
Whats the name of the intro song?
Can you add a camera to that laser engraver
wel good explanation
That splitter thing you didn't know what was for is just a thing that comes with the air pump, when I built my laser i bought a similar pump and that's what came with it, I just threw it away
good call, thanks!
yes indeed, it's an aquarium air pump: that's a splitter to spread the air bubbles a bit in an aquarium. you can attach multiple thin tubes if you want or just put it in the water as it is.
How loud is it?
Great review! Been looking at one of these units lately. Your review is most informative and has me convinced that this is the machine for me.For more laser cooling... Get a bigger bin. Fill about a half dozen 16oz water bottles 2/3rds full of water and pop them in the freezer. Under heavy use, pop one or two at a time in the bin full of water. Swap them out as the ice in the bottles melts.
It would cost a lot of dollars to get your house and hotel up
You get up and stay in the hotel to look bad
Bought one and was a BIG pain to work with! Correct about Leetro software its buggy and not worth using. Jobs will stop at random leaving you with ruined material. Do not buy.
Redcam is better
Hello, you are using that laser cutter? I need help with mine and can't get it! I need the RDUSET and RDVSET original files to make mine functionally again. BECAUSE: in the Ruida machine menu is a voice like fact para settings. DO NOT TOUCH IT! it will cancel the vendor para settings and user para settings and you will throw away your machine IF you didn't save allready those files on your computer. I've done it, too bad 4 me.
Great video and good music👍What is the title?
So i don't understand, it's better to take it with the Ruida controller or "raw" , manual controls?
Ruida especially if its paired up with the Lightburn Software
ruclips.net/video/gtUuuCIlu6E/видео.html
A chiller should have a operator settable temp setting so it can hold whatever temp you need. (within min/max parameters)
P.S. ground it anyway.
So it do engrave and cut bro?
A chiller with inline heater?! Sounds hacky.
Would this laser be able to fit a tumbler spinner inside to engrave?
YES
What voltage do you need for this machine?
Runs on normal US household 110.
220V/110