Re: Choosing a laser engraver....
HTML-код
- Опубликовано: 21 ноя 2024
- In this video we break down the most common types of laser engravers available on the market. We take a look at the 3 major considerations you will need to think about BEFORE buying your laser and how that will effect your choice!
---------------------------------------------------------------------------
Looking to level up your laser game? Updates, laser tips, and more. 👉: thelaserdispat...
Need help figuring out what kind of laser to buy? 👉: justinlaser.co...
---------------------------------------------------------------------------
HEY, hi, hello! Using laser engraving and laser cutting machines comes with potential risks! This channel's content is intended solely for informational and educational purposes. JUSTIN LASER LLC cannot be held responsible for any damage or harm resulting from the recommendations, settings, activities, procedures, techniques, or practices mentioned on this RUclips channel. By watching this video, you agree that you are solely responsible for your own safety and property in relation to the information provided. Please conduct your own research before purchasing machines, materials, or accessories. This channel is supported by viewers like you and may earn commissions from purchases made through links provided.
Do you have a laser engraver you really like and want to recommend? Please add it below!
What laser would be good to engrave metal?
@@paulywilson445 Anything fiber for true engraving capabilities. If you want to do some on a cheaper budget you can get something like the xTool D1 Pro with the IR module.
Epilog fusion edge
@@paulywilson445 If you are still looking for a machine that can cut metal, a laser cutter is for you. Maybe you can trust me.
Thunder Laser USA 35/100
I have a $300 K40 that's been running like a beast (with the original tube) since 2019. It's made me thousands of dollars, and I've never had a single issue with it. First thing I did was remove the stock gantry and enlarge the cutting area, which was not as difficult as it sounds.
Got a pointer to tutorials/resources about how to do that?
@@GeekRedux I guess RUclips doesn't allow links in comments anymore. I replied several times with a link, but my comments were all deleted instantly. They don't even appear in my comment history. If you "try to find" (that's right, couldn't even use that word that starts with the letter S) "openbuilds k40 12x24 rebuild in original case" it should be the first result.
@@matchstickdesignco Got it, thanks.
Is the Monport the same as k40? I see it's light burn ready
@@venomvette84 K40 is a general "model number" used to describe any number of small 40 watt CO2 lasers with a certain size footprint. When I bought mine, there were two variations: red & white, and blue & white. Aside from the colors, they were all exactly the same. Nowadays, a K40 still has the same basic specs (40 watt, 12x8 inch bed, same cabinet design), but they can range drastically in price, according to which company makes it and what "upgrades" are included. The Monport K40 has many of the "aftermarket" upgrades already installed, including a different controller board that's compatible with Lightburn. If you're okay with the small engraving/cutting area, it's a great machine for the price.
I bought an Atom Stack 10-watt laser for $500 months ago, and so far it has made me about $10,000 in sales. I am now looking for a CO2 laser which is why I am here. Thank you for the great information.
Hello, can it cut thinner clear acrylic.
What sort of products do you mostly sell?
What do you make with your 10w ?
Which model did you get? A5, 10 … etc?? Come w/ all the software needed for a WinLaptop? Will it engrave tumblers? Anything you would do diff?
I have almost all of the XTOOL lasers and love them all. Started with the D1 Pro and then got the M1. Loved both so much that I decided to upgrade when they came out with the P2. I have had it for about 1 1/2 months and I am loving it. I did buy the riser and conveyer but have not added them yet (need help lifting the P2 as it weighs over 100lbs.) Then I just got the F1 portable dual laser that I can take to shows and customize items for sale on the spot. Just got it yesterday so, still working to learn it but, so far, I love it. It has a 10 watt blue laser and a 2 watt red laser. super fast. I did order the slider so you can do larger projects and the rotary but, they have not arrived yet. All of these machines work with Lightburn or their own Creative Space software (which has tons of new features). Thanks for all of your information in all of your video's... very helpful.
Yesss I want that F1
Can you use a diode laser to engrave brass plated items - not solid brass?
I just bought me a two trees ts2 20W laset. I saw mostly good and positive reviews and got a great deal on one.
Still waiting for it to be delivered but I'm excited to dive into laser cutting/engraving to help alongside my woodworking!
Ive heard good things about it as well. Good luck and get ready for losts of personalization requests!
New sub. I'm thinking of getting a laser, specifically for engraving poured ingots of aluminum, brass, and copper. I'll pick through your videos, but basically, I am glad I watched this before buying a thousand dollar laser that wouldn't do what I wanted it to.
I have watched 3 of your videos so far. I will watch another 3 or 4. They are very well produced and informative. It’s good to find out about something, in this case laser machines, so one can make informed choices.
I have a D1 Pro with all the bits and bobs (20W diode, 2W 1064 module, 3-jaw chuck, risers, enclosure with light, etc). It's really easy to use and the stock software is good enough for the tinkering I've done so far. I tried Lightburn but feel I'm too dumb or lazy to really figure it out. I know I'll need it for the advanced stuff so maybe someday... They recently announced a 40W module and a Z-axis capability, so if you haven't started on a D1 yet, you might want to wait to get ahold of that whole thing first. As far as I know, they still haven't stated selling it yet (August 2023)
So one topic that I feel that doesn't get nearly enough coverage, especially when it comes to new users is the fumes these puppies put out. Holy moly is this stuff bad! I figured there might be a little, but no. You have to dedicate a LOT of air extraction to it or run it in a garage while you leave the space until it clears out. Any kind of plastics, leather, wood are horrendous on an open frame system. Even with an enclosure and filter, it's awful. I don't feel like any video has ever given this consideration enough time other than a passing glance. It put me in full-stop mode because I can only do metal with the 1064 in an enclosed room. There's also the vision protection and paneling you might need to protect the work areas. These definitely aren't toys and they're quite dangerous if used neglectfully. I am definitely no safety officer, but I feel like this is something that needs more emphasis for new or potential users.
I agree on the fumes part. Ive talked about it a couple times in some previous videos even did a full video on how much I spend on fume extraction filters (a lot!).
Thank you. I have not seen this mentioned.
Great video. I'm just looking into these machines. Thanks.
K40s are great if you do a little research. There is alternative software and they cut very accurately when set up properly. Its a great first laser if your into DIY. Not everybody can afford a $3000+ laser
I also own a k40. I have a special project that needs a 8x10 cutting area. After removing the original cutting surface and upgrading the exhaust fan. It's got to be a hundred times better than any crappy diode laser.
What software do you use? Lightburn?
K40’s are garbage. People justify at money spent because they can’t return it.
@@Rishy223 Lightburn
@@dueymiller5795 What exhaust fan did you upgrade to?
One the best videos on laser intros
Thanks for uploading these videos. Very well explained and filmed
I just ordered the Aterz V35 for my first laser, can’t wait for it to come in
Awesome! Nice power for a diode laser.
I'm a contractor who builds screen porches and decks. I have a ton of scrap material and drops from cuts like PVC, wood, vinyl, and aluminum. I am currently building a wood shop and have been thinking of adding either/both CNC and/or Laser cutter/engraver. One product I have in abundance is vinyl sleeves that are 6" square. The material is usually White in color. These are used for fence posts or to cover wood posts. The sleeve wall thickness is generally 1/8-3/16 thick. I want to cut designs through the sleeve wall. What laser would you recommend for cutting this type of product at that height? ( 6" x 6" ) varied length but mostly less than 12-14". I also have a ton of Decking scraps I want to make things with. These products can be PVC or Composite plastics.
***One last thing this is supposed to be a semi-retirement side hustle and crafting fun not a full-time business alternative. Oh yeah, I also do Oil painting like Bob Ross so I want to make customer wood frames and that leads to who knows maybe some engraving picture frames. My mind spins constantly LOL
I don't think you paint like Bob Ross.
He did it quietly, with an awesome head of hair.
And you LOL too loud. 😄
Really good info, delivered concisely and without too much detail, (just enough). ❤ thanks
Appreciate t!
The thing about the K40 is, that you get a powerful laser with a huge community and a ton of guides for upgrades for a very low price.
I even build a trolly for mine which houses a small compressor for the air assist, a drawer for materials and a water tank for the cooling.
Also I built a height adjustable laser bed and improved the exhaust by priting an adapter to attach a big inline fan.
You'll have a steep learning curve doing all these little upgrades and adjustments and end up with a great machine for small scale projects.
I’m curious, what do you make with your laser?
I agree 100% If you have a knack for tinkering or mechanical aptitude, the value is off the charts for what you can do with them.
That was Fun ,,,thank you .I'm a Bay Bridge Painter and were kind of hunting around looking for the one that will replace Sand Blast ,you mentioned Universal Lazar at the end ,but where would ya point me in the Industrial Blast Removal World I understand your Skill set and i love it that's why i watched the whole piece interesting and fun to watch ya man
Funny thing with modern industrial fiber lasers is that they're so fast in lighter gauge applications that the bottleneck has become the loading/unloading process. Our new fiber laser has an automated loading/unloading system that's twice the size and ~30% the cost of the entire setup.
Acmer P1 is also a very good laser engraver. I think it's worth recommending.
Thank you Justin laser. This is a fantastic sharing and explanation ❤
Thanks for watching!
The K40 is a great system and more customizable then any other desktop. My buddy pulled the trigger on a glowforge and my k40 is so much more capable. So many aftermarket parts and software and still a fraction of the price
K40 ust with few mods it's very capable machine. But there are some heavy mods that I would kinda question if it would not be worth it to DIY whole laser from scratch, for example expanding K40 cutting area seem not to be worth it to be since it requires to replace so many parts.
Great video ! - Very informative - I'm currently saving up for a good fiber laser to etch Anodized aluminum to make nameplates for some of my machine tool projects so was just watching some of the videos online when I came across your very cool video. Wish me luck in finding an affordable fiber laser with a fine focus to etch nameplates from black Anodized aluminum clearly...
Good luck! Lucky for you fiber lasers have an insane DPI capability so your results will be crispy.
This was very informative.
Thank you for this video and loved the comedy in the editing.
This video was so helpful!! Do you recommend any laser engraver for painted glass candle vessels?
Hi Justin! With a lot of new tech and machines out this year, maybe it's time for a new video like this till present day of 2024? Me myself are a small time laser business owner, and are looking into getting my second laser. Sure there is more people in my situation also looking for the "next step". Cheers!
Another one from Germany 😊
Just found your review, because I have an eye on the xtool d1 pro. Thank you for this easy to follow explanations.
I have an GCC Laserpro Spirit 40w CO2 Laser since 2008 and I can highly recommend it
Awesome thanks for the recommendation!
Just started looking into a laser business in Canada. Love your content. Thanks. Please make a video on what these kind of machines can be used for.
Great advice thanks for sharing. Diode lasers are now approaching 40w ikier has a 48w switchable to 24w they also do a 20w fiber for metal engraving interesting
Yeah they are getting crazy powerful for the size. Not sure how long people will tolerate the extra cost and still not be able to do certain common materials (clear acrylic). The Fibers are a good direction for them to go though.
Hi Justin, Clear and concise! Your style is very easy to watch, and the content comes across as knowledgeable and unbiased.
I clicked on the link for the fiber. While it shows a cart, there doesn’t appear to be a way to build a config. Any insight?
Thanks for the great info.
Thank you appreciate it! Im not exactly sure if OMG online ordering works yet. If you email the company (Richard Zhang) he will set you up.
The Keyence MD-X series is pretty nice
Well I need to buy a laser, good information glad I found your channel
Got the Skulpfun S30 Pro 10 watt laser along with the expansion kit for a larger cutting area on the way. Can't wait to get to work on it, I wish I'd gotten into laser cutting a long time ago- better late than never!
edit: right after this comment it came- time to put it together. Tomorrow is going to be a busy day learning how to use it!
Very cool! I have the same one but havent gotten a chance to use it much yet. Takes up A LOT of table space haha. Good luck!
Hello, like your video on laser engravers. I'm in the market for one to do some engraving on Charcuterie boards. From last names to business card size engraving with phone numbers. Can you recommend one you think would accommodate them? The sizes of wood would be from 8" - 9" wide, 17" - 18" long and 3/4" - 1" thick. No cutting, just engraving. Any info would be much appreciated. Thanks
If just doing wood engraving like that youll have a fair amount of options. If you are looking to make a business out of this you should go straight to a co2 laser. If you need a desktop size laser check out the xTool P2 or the Thunder Bolt. Make sure the bed size is large enough to fit your longest pieces though. If you have room you can get something like an OMtech 80w mid range industrial.
Thank you for the review Justin! very informative! Do you have thoughts on X-tool laser engravers?
Nice video Justin,Thank you And good luck
Great video, straight forward information. Thank you. I'm looking into a mid CO2 and trying to compare companies and machines; so many options! It can get confusing. Thanks for the brand info at the end.
The frame left over after cutting those keychain blanks would make an awesome stencil for painting with. What do you do to recycle acrylic leftovers?
I usually have a more left over acrylic than I can use so I take it back to my supplier and they send it back to the manufacturer for processing.
The Raycus 50W can cut metal right? You would have to get the smaller lens
I used a Trotec 300 Laser, at work for a few months, with just the Fibre Laser, for marking & engraving Tools for the Program, tool ID for the tool crib tracking & Serial Number for Calibration Tools.
It was, if I recall correctly, a 30 Watt Laser head, so it took quite a few passes to cut through an Aluminum Pop Can... It wasn't intended for any "Cutting!"
It can also have a CO2 Laser as a "Flex" Model, giving you a full choice of materials, but my employer didn't see the benefits, so missed out on some cases for tools, as the "Z" Distance (Vertical) was insufficient as well!
The 400 & higher models have more Z depth available! I have seen the "Galvin" lasers in video but never used one!
I started on a rented Trotec 300 and MAN do I miss that machine!
I got an Omtech 28" bed... love it. No space though 😂
Cooles Video danke für den Einblick
Hi from Hawaii!! Im in the market for a laser...but just to cut leather and thick vinyl...so basically simple, easy...not in large quantity. Any recommendations? Cuz shipping to paradise is absolutely CRAZY!! Mahalo in advance!! U are one informative and entertaining tuber...love it! Aloha!!
Hey Kevin! Leather is no problem but you dont want to laser cut vinyl as it will release chlorine gas which destroys your machine and your health. Im not exactly sure what people use to cut thick vinyl I assume its a drag knife CNC.
Cool channel, subbed!
I got a TroTec Speedy 100, it awesome. Worth every penny.
I was looking at their fiber marker, entry level Speed Marker 1300 is 50K, the little OMG might be what I'm looking for to get my feet wet.
Thanks! I started on rented Trotec's and miss them so much.
Very informative. Just what I was looking for before my first purchase. Thank you! PS: A thumbs up from a new subscriber.
Good luck with the purchase and thanks for the sub!
Which one did you pick?
Finally!!!!! A very well explained and open minded review(s). This video really helped me. Thank you!
One question though…. Can you use the CO2 to etch Challenge Coins and then the Fiber Lasers to give it more of a 3D effect?
Thank you again.
Hey Henry. So with the co2 you could mark the surface of those coins using a spray like Cermark. You might be able to get a little depth if you used a high power laser and steel coins but something like brass is not going to happen. Challenge coins are a perfect product for fiber laser exclusively. You can do surface marking OR deep engraving depending on what style you need.
@@justinlaser Thank you, I was looking at the XTool F1, but the more I search, it's best (to me) for portability and doing work at craft shows. Thanks again for the video.
Great video with lots of great information. Having lived with your Boss for a long time now, would you be buy from them again or would you go for an AEON or Thunder Laser next time? Sorry to put you on the spot, but I've heard a lot about all of these, and I am presently making this decision.
I would shop around. Not because I dont like Boss, they have been good to me. Im intrigued by the "all-in-one" aspects with the chiller and exhaust inside the machine. All 3 are good companies. If Thunder or Aeon want to send me a little something, they...uh...know where to find me lol.
Wonderful video! Just what I was looking for. Thank you!
I have the omtech polar and the xtool d1 pro and i can attest they are amazing.
Great video! But I'd like to have an opinion about InfraRed Laser. Regards.
Doing a review of the xTool IR module next video. So it should have at leas some insight there.
Great video, thanks!
I'm interested in adding a laser head to the CNC machine I designed. Can you do a review on just the laser source needed for this? I think many people are interested in this.
Very useful breakdown for a newbie like me. I tried reading articles on the manufacturers' websites but they're all SEO optimized AI generated bullshit that doesn't actually tell me anything and barely even shows examples. Thanks for picking up their slack, youtubers!
What laser is good for 1/2 inch Acrylic block? Your video is really goods.
thanks bro very informative really well done
Appreciate it!
Great video! So much great info! Question: How do those lower cost diode lasers handle fumes? They appear to just vent-directly into the room as there's no body/housing unit to funnel fumes through a duct system?
By default they dont do anything with the fumes. Some people run them in the open which is nuts but they do sell enclosures you can attach exhaust fans or fume extractors to. Thats what I do. Works great.
@@justinlaser I'm shocked these tools are sold without an enclosure! 😱That's nuts. Thanks for confirming what I had hoped I was misinterpreting! 😂😭
I'm so overwhelmed with the different lasers because I found that each one has some type of a problem, and I'm not even talking about money. So far the ones I found available in Europe are: Epilog, Creality, Flux and xTool .. I had my eye on Epilog for YEARS, but not only is the smallest one very expensive ($14,300 with the rotary), but I've heard bad reviews where people claim that the price is mainly due to you paying for the brand name and not the machine, cause they break down. Then with the other options, some don't offer help or customer service as I saw people complaining that they couldn't get any help when they were dealing with issues with their machine.. or the machine isn't reliable, like there's always something. So it's overwhelming cause I don't have the kind of money that I can easily throw away, I need something reliable I can depend on. I'm kinda gravitating towards Flux Hexa, but I'm still not sure.
If you had $10k to purchase laser engraving equipment… what would you buy? Right now I’m looking into the xTool P2 55w bundle with an F1 ultra. Thoughts?
Thanks for the detailed explanations- now just need to figure out which one ! 😂
Ein sehr informatives Video, ich danke dir von Herzen. Welchen Laser würdest du empfehlen für eine kleine Lederwerkstatt - Leder bis 3mm ausschneiden und Acryl Schablonen für mich fertigen. Ein Budget von ca 2000€ Ich danke Dir SEHR!
Can you do a review on the Vevor 20w laser. Or can someone chime in & say if their even worth trying?
What do you recommend for mainly cutting 1/4 inch plywood or mdf wood shapes?? Don’t have a business now but… i cut everything by hand 😊
Mid range co2 would do that no problem. 60-100w co2 machine youll be cranking those shapes out in no time.
Very attentive video!
Thanks!
Hello Justin. Great info. Could suggest a good and comprehensive online training program to learn EZCAD 3 in English? Thank you
Could you please let us know your plastic supplier? Also is acrylic the same thing as plexiglass?
I use Everything Plastic but they are local to me. You can buy from many places online. Yes, plexiglass is acrylic. Get cast acrylic though it is nicer.
@@justinlaser thanks. Until recently I had never known there were 2 diff kinds. Who says you can’t teach an old dog new tricks?
@@justinlaser thanks
A great review, well done.
Thank you!
I live in a house built in 1902.... i know this may be a silly and or stupid question, but should I have an electrician come out and make sure my outlets are safe and capable of running a small or mid range laser? I have a bit of an irrational fear of electrical fires 😅
The best comprehensive video ive seen on this topic. Thanks for explaining this in a clear way. Sub'd.
Great review Thank you so much.
Thanks for watching!
what machine did you use for the acrylic keychains?
Boss LS-1630
Great video!
Thank you!
Can i ask all the knowledgeable people here a quick question?
If you wanted to cut stencils from 300gsm card or posterboard that was 28"x 22" inches for spray painting. what machine would one use?
Thanks.😉😉
Can you maybe do a super beginner video for those of us who can't pull off $1000 to start off with. Something to just even see if we like laser engraving enough to get into it?
I want a Boss laser. I am looking at a desktop diode and working enough till I can afford a boss.
Nothing wrong with that I rented time on a laser for years before I could buy one.
Justin! thanks for the tips, man! looking to expand my sources of income and put my money to work. This was a great way to dip my toes in and learn about what technology is available.
A question for you... What is the benefit of using a laser cutter over something like a cnc router? (for cutting not engraving)
Thanks for the kind words! I'm not well versed in CNC routers so someone can correct me but I think the laser is quicker and more precise if just doing cuts. If you are looking to create trays or something with variable depths in the design then the CNC would be the way to go. But if just cutting repeatable flat designs Id imagine the laser is a better option.
Sweet! thanks for the response@@justinlaser That makes sense, a CNC router would have to take multiple passes and require either hold downs or a vacuum table to keep the material stable with such high rpms.
what unit should i be looking at for engraving smooth concrete slabs? hobbyist but want a quality unit that will last
Excuse the ignorance; however, how does the product go from acrylic to leather? Thanks for the video.
Would you mind sharing your supplier for acrylic?
How about hybrid lasers: Fiber + C02 in one machine?
Thank you Justin, excellent video and information. I appreciate this video. BTW, nice transitions! I'm interested in subsurface laser engraving. Having zero experience with engraving, is the cost investment and learning curve ratio proportional? Basically how long (on average does it take to learn these systems)? I really want to add this service to my photography product list.
Oh! I've been crazy about the Glowforge, I'm glad to get another perspective of this laser platform. Thanks!
which subsurface laser machine did you end up going with? If you didn't get one yet, which ones were you looking at? Trying to find some good brands myself
@@jamiegaudet6008 So I intend to get a Polar for small projects and a Thunder 5200 for my larger projects.
Thanks for asking. Which one are you most interested in having?
@@patrickjackson9418 I'm mainly just looking for a smaller one for small projects like crystal 3d images. I haven't been able to actually find any yet. Kept stumbling on videos of "whatsapp sellers" and it seemed a bit sketchy lol. I'm going to look into the the Polar, thank you!
You mentioned subsurface engraving. None of the popular brands can do subsurface engraving. Well, I suspect they can all do it, but the math is like quantum physics (smile). A machine designed to engrave subsurface is crazy expensive right now. While the return on investment may be good... once you get pass the learning curve, I think I will simply wait until this niche market saturates some more and the prices come down. I wish you well on your hunt and if you come across something reasonable, please let me know. I am interested in the type of creative work because of the subsurface engraving I saw in some boutique shops some years ago.
hi, thanks for the video and for all the information, at the risk of sounding redundant I'd like to know what machine/type of machine would be suitable specifically for personalizing metal nfc cards. The cards are already "pre-cut", it would be "enough" to personalize them by engraving. As the surface to be personalized is that of a bank card, I was wondering if there were any "mini engraving boxes". Thanks again for the video and good luck with your future projects :)
I just looked them up. The most efficient way to do engraving on products like that is a fiber laser (more expensive option) or at least something like the xTool F1 ( geni.us/xtool-f1-engraver ). They are fast and designed for that kind of work.
which machine is the best to cut and engrave chrome tanned leather ?
Any of them would work depends on price. CO2 laser would be the best overall for cutting/engraving size and speed.
I will be purchasing a business that currently outsources their engraving. I am looking to bring that in house. Majority of work will be on cylindrical surfaces. Mostly faux leather. Some metal. For a budget around $5K (or lower), what setup would you recommend?
Just engravings? If so I would look at a galvo system since they engrave way faster than the standard gantry machines. I would see if you could find out how well a fiber laser performs on faux leather because if its good enough, that covers the metal as well.
@@justinlaser Thank you very much for the advice. I was aware of fiber lasers but had not heard of a galvo system. Your recommendation makes a lot of sense.
Ich benutze tatsächlich einen K40 Laser. Der Laser hat mich ca. 400€ gekostet. Allerdings macht es keinen Sinn ihn ohne Air Assist zu benutzen. Daraufhin habe ich mir einen kleinen Kompressor und ein Cloudray Kopf gekauft (zusammen nochmal ca.100€).
Edit:
Ich musste mir zusätzlich noch einen höhenverstellbaren kleinen Tisch für den K40 kaufen (nochmal ca.100€) um immer den richtigen Fokus vom Laserstrahl zu haben.
Also bis der K40 richtig läuft braucht es ca. 600€, Handwerkliches Geschick, einige Stunden Zeit um die Software (K40 Whisperer) und Einstellungen zu verstehen.
Ich benutze meinen Laser jetzt seit ca. 1 Jahr täglich und bin soweit zufrieden. Er schneidet Holz, Leder und Acryl, graviert Glas also das was ich von einem co2 Laser erwarte.
Der großen Nachteil beim K40 ist die Größe der Arbeitsfläche. Er kann gerade mal ca.30cm x 20.5cm lasern. Was mir beim kauf natürlich bewusst war, mich aber mit der Zeit doch immer mehr stört.
Trotzdem bin ich sehr froh mir keinen Dioden Laser sondern einen co2 Laser gekauft zu haben.
Als nächstes kaufe ich mir einen 60W co2 laser mit einer arbeitsfläche von 70cm x 50cm (ählich wie der in deiner Werkstatt oder sogar der gleiche?) um größere Projekte und Aufträge bewälltigen zu können.
Vielen Dank für dein Video. Habe dein Kanal vor kurzem erst gefunden. 😉
Mach weiter so 👍👍👍
Liebe Grüße aus Deutschland. 🇩🇪
I need a laser engraver to personalize guitar picks. Any advice?
Hi! I’d like to engrave small metal pieces and I am so overwhelmed by options. Does anyone have advice on what’s reasonable cost wise and the safety/set up? It’s all new to me!
Thanks
If doing metal you need a fiber laser. They are designed for metal. Unless you are trying to do crazy deep engravings you can get away with a 20w fiber. Some of them even have an enclosure so you will be good on safety. Check out Monport Laser or OMtech they have 20w fibers. They will run a couple grand but thats just the price for entry for metal.
Thank you so much for the awesome info!
You say diode laser is no good for acrylic, yet you showed an acrylic keychain pattern. Did you cut it on your ortur diode laser? Please clarify.
When I watch videos about things I do not have much experience with , my eyes glaze over and my ADD kicks in and I quit. I would like to know for the beginner Hobbyist What is the real difference between a 5w laser vs a 10w laser, I understand there are tons of opinions on brands etc. I intend to engrave mostly, cutting has not been something I have given much thought, Is having the capability to cut thicker material something that will present itself as my skills grow?
Yeah its a lot to take in. I feel the same way when I watch, for example, a woodworking video or 3D design. The 5w to 10w difference is just a power difference. 5w is enough power to do engravings but still pretty weak overall and not great for cutting. 10w is good for engrave and just enough to do some decent cutting. If you want to mostly focus on engraving and potentially do some light cutting, go with the 10w. The prices are so affordable these days there is almost no reason to go down to 5w.
Can you suggest a laser to mark branding plastic and metal at the lowest possible Budget .... i need at max 3 x 3 inch area
For branding plastic is most important
I want to start business doing bottle, pen, cup, belt etc. What lesser should I buy
Many choices based off price. Need to make sure it has a rotary attachment.
What about 40 watt diode lasers?
what do you think about the Laserpecker engraver? Does it seem good for a beginner, looking to make small items like tags and book marks, and wood items?
I havent used one yet but Im not against it for learning. Obviously very limited as far as size and capabilities but you still get to learn some basics..
Do you like your Boss Laser mote than the Trotec you used back in 2015? I used a Speedy 200 for acrylic at a previous employer.
What do you think about OMTech CO2 midrange lasers? Thanks!
Oh god not even comparable to the Trotec. But they arent even remotely in the same price range so its like comparing a Ford to a Porsche when all I can afford is the Ford lol. Ive heard decent things from OMtech I would consider getting one if I ever replaced my current. I mainly keep an ear out for how people talk about customer service with these companies.
@justinlaser performance and warranty are key. Epilog claims to have bumper to bumper 2Y and I've asked for an itemized list from trotec. The main thing is the detail provided by the RF type laser tube on the small signage I need to produce. I only have experience with a trotec speedy 300, sorry about last post a 200 doest exist lol
I might be grabbing the ikier k1 pro max 48w/24w power switching laser I just wonder if it can engrave on waves
I work in the Point of Sale industry, I was hoping someone can help me when it comes to engraving opal acrylic ice buckets. I would like to learn how to engrave through a coating through to opal to be able to create illuminated logos ect.
Hello, great content, thank you!
I want to engrave on metals and wood to mainly create memorabilia. Is X1 tools f1 model a good choice?
Maybe you could try a UV 5W laser marking machine
Hi there, I need a laser engraver machine for leather. Do u have any suggestions?
Thanks a lot
For leather laser engraving, and engraving depth needs, the use of a CO2 laser machine is better, and the RF tube than glass tube service life is longer.😄😄
Hey Justin,
Have you used a laser on blue leather? Asking for a friend. 😉
Hi! What do you reccomend for making stamps. THANKS!
Price range? Either diode or co2 will work for stamps. co2 more expensive but will complete the work faster.
Hello from Greece my friend 😀, what is your opinion about 80w TTS-10 ? I don't have any experience with those engravers.. I will use it to engrave or cut plywood 3mm to 5mm.
Thank you in advance