Was fun working with you bro! I just now realized how funny it is that we were so focused on the RSX that we hardly looked at the Prelude next to it. Hahaha
Can't wait..... the wiring harness heater controls is bad ass & the hood release hinges look dope too. Loving the support our chassis of choice still receives. Thank you Dana, CJsWiring & everyone else who helps keep these alive in the community so everyone is able to hopefully get the parts they need rather than scrapping more cars.
The Junkyard scene is totally different now. I remember years back you’d go out there and score good stuff for your own project. Today they pick to flip. Nothin but bare bones now
You guys are so lucky to have good junkyards out on the west coast. Where I'm at there's basically nothing at all. Certainly none with an abundance of Honda stuff. Every engine I've had to buy has had to come from an importer and prices have gone through the roof over the past couple years.
Ahhh Newark pick n Pull. I pulled a knuckle assembly there obviously you can't take off the spindle there you need a press tool. She tried to charge me for them separately and she goes is that a sensor too... I said maybe if you can tell me what sensor it is .. 🤣🤣 she was mad mad. She closed her window and I had to wait for the other cashier to finish and help me. We were all lol at her.
Pulled a b20 long block with no accessories at pick your part over here in southern California they wanted to charge me $519. I walked away. Prices are crazy now. I bought my b18 for 250ish out the door from there 2 years prior
I actually worked at this picknpull that rx7 was sold before I worked there but the guy moved and died. I was told that they couldn't get the keys back but didn't stop me from asking since I really wanted it
I have a 2K5 "A-Specked", RSX Type S (Blaze Orange), I named "Penny". ;-) I plan to keep her until I die and at 66 (poor health), that could be sooner than later. What you need to build is a "Salvage truck" (or trailer), that includes a 2 ton hoist, toolbox, plasma cutter (generator), minimal.
That's good score for that prize I think. I own a 07 8th gen si with a k24a motor and stock 6speed lsd Trans and love it. I also have the k20z3 motor that came out the car with spun bearing to rebuild one day. I was hoping not to need a crank. Can't they be fix sometimes ???
It can be it's gonna depend on play in the crank, you might need to machine it and run oversized bearings. could be just fine. could be absolutely fucked. Those are the 3 potential outcomes until you check it.
Its still been expensive build lol, Back 10 years ago you had to blow 1 grand on the ecu to throw in the eg ek , and the mounts was still shitty from hasport and they was about 600 for the kit the rest was easy and cheap but now they have updated they parts everything is cheaper but of course junkyards are barely getting honda stuff cause people rather part out and charge high up the ass
Bro not only can you do a k24/k20 hybrid now but you can use the tsx head on another k24 block from like an accord or something easy to find for another build down the road
Bro I know exactly which lady was giving you a hard time out there at the Newark picknpull, she’s nitpicky as fuhk! Bought an ek door panel and she held me up at the exit cause the dude at the window(who was chill) only charged me for the panel. But then she went back inside and made him charge me for the speaker grill and the armrest coin holder🙄 Some for real bs with the prices with stuff you’re pulling from a literal junkyard. All good shit tho still a score for you, am always in awe when I see a motor pulled from the yard, not an ideal work setting but dope to see you n the homies make it happen!
I had exactly the same rubbish happen from my junkyard. Charged me for 2 shifter cables even though they are both required to shift one trans. Anyway still a good score man it's just annoying the way they charge
@@s19pajua13 I wish I bought the type S instead of the damn mazda3, regreted after I found out that they had put a ford engine in the Mazda3. Wasted 21k
Nice .. i detailed a suv from your naighbor about a year and half ago as i was cleaning the car i saw all your dope civics haha but ama keep your stuff a secret havent told anyone where you stay at and keep up the great work
hello I need your help I have a honda 93 1.5 lx engine but I put a D16y5 bloke with a D16y7 head but the engine makes noise and the Smogchek does not pass if I put the 1.5d15b7 head it works thanks of all
Dam I got a rsx base recently. And been hunting for parts. Can't find anything. Type s head would be great mod for my rsx. Maybe should have kept my old ek civic. But rsx so fun. Nice score everyone looks for that type s
The Junkyards have got so greedy. They wanna get you for any little thing these days. My local one i caught the dude looking up EBAY prices for used taillights and i was like "Ya. Na. Im Good."
Its such a shame the only few pick and pull yards near me no longer aloud you to pick and pull you can only call them and they get the part for you smh now the closest ones are over 2 hours away
I mean can you blame them? Look at the idiots who trash the yards with shit and ruin good shit for there pitty $10 parts. Good engine you say ? Let’s tear it apart for a cam cap that won’t work with another engine but because I’m cheap I’ll try anyways
man i'm local to these pick n pulls and whenever i see sought after k/b series engines, i know that shits picked clean by you 😂. first come first serve.
Was fun working with you bro! I just now realized how funny it is that we were so focused on the RSX that we hardly looked at the Prelude next to it. Hahaha
dana, thanks for blessing us with another one! (Junkyard vids are my fav)
Can't wait..... the wiring harness heater controls is bad ass & the hood release hinges look dope too. Loving the support our chassis of choice still receives. Thank you Dana, CJsWiring & everyone else who helps keep these alive in the community so everyone is able to hopefully get the parts they need rather than scrapping more cars.
The Junkyard scene is totally different now. I remember years back you’d go out there and score good stuff for your own project. Today they pick to flip. Nothin but bare bones now
Exactly man. It’s insane. This is why you can’t go to a junkyard to find parts hardly anymore.
People have inside info from workers at the yard , and they get that shit early too.
Always love the junkyard videos! They're definitely some of my favorites!
You guys are so lucky to have good junkyards out on the west coast. Where I'm at there's basically nothing at all. Certainly none with an abundance of Honda stuff. Every engine I've had to buy has had to come from an importer and prices have gone through the roof over the past couple years.
What area you in? I'm on the east
That's facts I'm in NY motor alone is like $1000 and up
i had a feeling that was the newark pick n pull by the side metal fence. its cool you show our bay area junkyards. i go to it
One of the smoothest engine removal I ever seen 😂😂😂😂 right in the cart
Ahhh Newark pick n Pull. I pulled a knuckle assembly there obviously you can't take off the spindle there you need a press tool. She tried to charge me for them separately and she goes is that a sensor too... I said maybe if you can tell me what sensor it is .. 🤣🤣 she was mad mad. She closed her window and I had to wait for the other cashier to finish and help me. We were all lol at her.
Dude that lady is notorious!
Nice score. You should power up the donor vehicle to find out the mileage on the engines (use the battery pack on your impact with some wire leads).
Pulled a b20 long block with no accessories at pick your part over here in southern California they wanted to charge me $519. I walked away. Prices are crazy now. I bought my b18 for 250ish out the door from there 2 years prior
I actually worked at this picknpull that rx7 was sold before I worked there but the guy moved and died. I was told that they couldn't get the keys back but didn't stop me from asking since I really wanted it
I have a 2K5 "A-Specked", RSX Type S (Blaze Orange), I named "Penny". ;-)
I plan to keep her until I die and at 66 (poor health), that could be sooner than later.
What you need to build is a "Salvage truck" (or trailer), that includes a 2 ton hoist, toolbox, plasma cutter (generator), minimal.
Love junkyard videos!
I could watch them all day
Love the junkyard videos
Love these JY videos, and appreciate all the knowledge, I’m always learning something new. Keep it goin.
Man Dana all I know is that your sitting on a gold mine in that garage of yours. Keep up the work I always look forward to watching your content.👍🏻
Ecu always goes in my waistband 😂😂
That's good score for that prize I think. I own a 07 8th gen si with a k24a motor and stock 6speed lsd Trans and love it. I also have the k20z3 motor that came out the car with spun bearing to rebuild one day. I was hoping not to need a crank. Can't they be fix sometimes ???
It can be it's gonna depend on play in the crank, you might need to machine it and run oversized bearings. could be just fine. could be absolutely fucked. Those are the 3 potential outcomes until you check it.
I gather so much info watching you daily!
Seeing the prelude next to you is so sad. Love that car.
I'm jelly. Never get this at my yard.. good score.
Great score man. Any info on k24 rear wheel drive swaps? I want to kswap my 1992 hardbody
Static bumping that good ol Blackstreet 👍🏾👏🏾
Man if the junkyards in my city had stuff like this my coupe would've been k swapped
Its still been expensive build lol,
Back 10 years ago you had to blow 1 grand on the ecu to throw in the eg ek , and the mounts was still shitty from hasport and they was about 600 for the kit the rest was easy and cheap but now they have updated they parts everything is cheaper but of course junkyards are barely getting honda stuff cause people rather part out and charge high up the ass
Same. The problem is for me isn’t the engine (I can find K’s everywhere). It’s the transmission that I find a hard time finding for a decent price
@@asianmanfromasia hondas here get stripped to tha bare frame
there was a black rx7 in the Newark yard for sale as well.
Bro not only can you do a k24/k20 hybrid now but you can use the tsx head on another k24 block from like an accord or something easy to find for another build down the road
Bro I know exactly which lady was giving you a hard time out there at the Newark picknpull, she’s nitpicky as fuhk! Bought an ek door panel and she held me up at the exit cause the dude at the window(who was chill) only charged me for the panel. But then she went back inside and made him charge me for the speaker grill and the armrest coin holder🙄 Some for real bs with the prices with stuff you’re pulling from a literal junkyard. All good shit tho still a score for you, am always in awe when I see a motor pulled from the yard, not an ideal work setting but dope to see you n the homies make it happen!
Lucky because in sac they’re not much but there’s lots of efs in Rocklin junkyard passed Sacramento
Lucky here in Canada they go like gold. That ecu alone is $500'-600.
That black street playing tho 🔥💯 that’s a whole vibe in itself! Love the vids Dana!
So true when people work behind the counter and don’t know what the hell they’re talking about 😤
I had exactly the same rubbish happen from my junkyard. Charged me for 2 shifter cables even though they are both required to shift one trans. Anyway still a good score man it's just annoying the way they charge
But what if you only needed one cable ? Should you get it for free ? If you bring 2 cables up you’re going to get charged for 2
It's not what you know. its who you know
just got a 92 accord wagon, wanna bring it to s1 to awd it
I love the junkyard videos!
If only you lived in Az someone recently hit my 40,000 mile 2004 Acura TL from the side. It is totaled but the engines good lol.
Damn I remember test driving a type S back in 2004, now it’s a collector car or engine
I sadly sold mine for a 3k profit yesterday after owning it for 5 years. Such a solid car
@@s19pajua13 I wish I bought the type S instead of the damn mazda3, regreted after I found out that they had put a ford engine in the Mazda3. Wasted 21k
Came up! Been looking for an aftermarket intake for my RSX, that’s a hella good price.
Maybe I missed it, but how many miles were on the body of the RSX TYPE S? It sure cleaned up nice.
Great score bro! Wish i had it in me to pull engines in the junkyard lol. Hella savings
Awesome score Dana !!! 😜👍🇦🇺
Nice score bro, Keep up the grind you been at it hard
Static always eating phat! Thanks for the videos dog!
Looks like some solid content coming soon!!!!
Junk yard vids are to live for hahah - To note that intake Part # 69-1009TWR
Product Style 69 Series Typhoon Kits
Love the yard videos
nice score man!,ey just curious, do you wrestle, hit the maT* alot? your left ear looks liek your do :-)
Bro, 734 dollars for a good motor/trans and ECU seems like a pretty good deal to me...
Thats what i thought, thats a freaking steal
Love these types of vids
Nice score I have that same K20 it's being sleeved for boost
Nice .. i detailed a suv from your naighbor about a year and half ago as i was cleaning the car i saw all your dope civics haha but ama keep your stuff a secret havent told anyone where you stay at and keep up the great work
Those look like good prices. LKQ yards aka pick your part are getting pricey. And they wanna slap on a warranty without asking 🤦🏼♂️
Homie got a k20 for 700 bucks , I felt pain when I got a d16y8 for 600$ 😔
No tranny just the engine
You are guys so talented being able to build up a car and put a engine in it.
You have to try cold pizza with hot sauce. I recommend the original sriracha sauce.
hello I need your help I have a honda 93 1.5 lx engine but I put a D16y5 bloke with a D16y7 head but the engine makes noise and the Smogchek does not pass if I put the 1.5d15b7 head it works thanks of all
I spent $1300 on a ECU W/ KRPOv4 alone. U scored HARD
He took that ecu out like he was literally stealing it 😂 sniped that shit
Dam I got a rsx base recently. And been hunting for parts. Can't find anything. Type s head would be great mod for my rsx. Maybe should have kept my old ek civic. But rsx so fun. Nice score everyone looks for that type s
Red prelude looking good next to it
The Junkyards have got so greedy. They wanna get you for any little thing these days. My local one i caught the dude looking up EBAY prices for used taillights and i was like "Ya. Na. Im Good."
Wtf... hell na lol.
Man, these engines as a bare long block are $1500 minimum where I am in Australia!!
Right next to the lude😲.
Junkyard videos FTW!
Yow what happened to your toyota sienna service van ? Why u driving the chrysler caravan
Talk about a Come up!!!
Great deal man 735 for type s engine trans and ecu is hell of a deal
still that isnt too bad dana when an imported k20a is a little over 500 and more with shipping
wtf is environmental fee ? Whos taking that money ? What does it do ? The government in Cali is corrupt to the core.
Dana keep it up fam I look forward to this 👌🏻👌🏻👌🏻🙏🏼
That pizza looked fire, now I want pizza lol
I paid for a side view mirror at lkq in Maryland for 50 for my 99 Corolla base . It's sad. They even charged me 60 for a stock cluster smh
That custom Gucci taters shirt is straight fire! Dana!, Do you have merch for ur subscribers to buy?
What’s up man you still go to Modesto for your tuning?
Damn all that for $734 😳 that's amazing.
Thats almosr $1000 USD for a junkyard motor.... yup times have changed... thats alot of workl to get it out and take it home.
Good score. Jelly af.
Sick vato coming up hell yea💪
How does one make his mark at a junk yard? Serious question.
Stand there claiming it from other people that show up until you can swap out with your buddies and get your tools.
i saw the jack in the box buttermilk , they sell pizza?! & if so how is it ? haha
Did he ever do the giveaway honda
Lets go!
Damn I need those seats!
Bro that’s a fkn steal for everything you got…going by todays prices!
It took me 5 months of watching to finally get a door for mine.
Let's goooo🤙
Bruh you need a Ridgeline.
Brother i bought a Japanese import motor. I paid $800 for it for my crv. That is a good deal.
Will a k series drop into a 99 CR-V awd 5 speed, need me a off road sleeper
I love your junk yard video bro. I click so fast!
Yo man just totaled my Type-S, but its all rearend damage. How much do you think I could sell the engine/tranny for? Had 160k on it before the crash.
Good shit. Nice find
🔥
Great content like always bro. 👌🔥
You came off bro. Good come up
Nice
Its such a shame the only few pick and pull yards near me no longer aloud you to pick and pull you can only call them and they get the part for you smh now the closest ones are over 2 hours away
I mean can you blame them? Look at the idiots who trash the yards with shit and ruin good shit for there pitty $10 parts. Good engine you say ? Let’s tear it apart for a cam cap that won’t work with another engine but because I’m cheap I’ll try anyways
What yards do you normally roam?
Could I put one of these in my 97 integra? I live in the Seattle area. Ship me one of these!
man i'm local to these pick n pulls and whenever i see sought after k/b series engines, i know that shits picked clean by you 😂. first come first serve.