Instructional video for sewing the Olson mask (COVID-19)
HTML-код
- Опубликовано: 6 сен 2024
- Sewing Fabric Face Masks
Thank you for your interest in sewing fabric face masks. This video features the healthcare creators of the Olson Mask.
NOTE: These are NOT meant to replace manufactured masks.
Updated pattern and more information can be found at: bit.ly/UPHMask
Just want the PDF of the pattern go here: bit.ly/UPHOlso...
*The hospital will provide the filter, double-sided tape and hair bands and assemble here after masks are dropped off.*
UnityPoint Health - Cedar Rapids, Iowa has an adequate supply of masks however - they remain in short supply nationwide due to COVID-19. The hospital is looking to be proactive in addressing the possibility of future supply challenges. Therefore, St. Luke's is calling all sewers to help make masks. Our hope is that we won't need them, but we must plan for the unknown.
Fabric masks offer the benefit of being able to be washed and re-used as each healthcare worker will need to change their mask several times during their shifts, as the mask becomes soiled or damp - for maximum protection.
A new modular mask, The Olson, named after 1930's legendary maker nurse Lyla Mae Olson, was quickly developed by clinicians from UnityPoint Health and is being shared across the globe in the fight against COVID19. A group of clinicians teamed up in the hospital's generate prototyping space to create a series of experimental designs rooted material science and easy fabrication. No special instruments are required for fabrication, and the pattern is compatible with common mask patterns being released around the country.
Your time and talent can greatly impact our ability to care for our community members and help ensure our safety as we do. Fabric masks offer the benefit of being able to be washed and re-used.
They don't have to be stylish - just functional. Non-matching fabrics, thread, elastics are fine. It just needs to be well sewn mask - with no frayed edges or missed seams.
Download the Olson Mask pattern here: bit.ly/UPHMask
Completed Masks
Enclose completed masks in a closed plastic bag or closed plastic box.
We will launder them prior to use so no need to wash before delivering.
Please deliver to the St. Luke's Foundation, 855 A Ave. NE, 1st floor, Cedar Rapids. Phone (319) 369-7716.
I’m a registered nurse & a quilter.
Never thought the day would come when I needed to make my own masks.
Kate Lyn - Me, too. I never thought I’d need sewing skills to make my own PPE!. Glad I have the skills!👩🏻⚕️🙋🏻♀️
Kate Lyn , I’m a registered nurse and a (wannabe/trying to be) quilter, too. I know exactly what you mean! I never envisioned a time that we would need to make our own PPE. Our profession is so blessed to have such great people with innovative ideas!
I’ve always said we nurses are jacks -of-all-trades, because it seems we are constantly called upon to find solutions to new ‘problems’ almost every day! And necessity is the mother of invention, so...here we are.💁🏻♀️😁
Yes all that money we pay for our insurance and they can't be prepared for a worldwide pandemic. And now that the government is coming to the rescue they will never spend money to prepare.
I’m sorry you’re forced to this measure, especially at a time you’re already so overwhelmed by patients. If people who aren’t working in a medical setting could sew these, it would save wear and tear on those most important workers
Couple of extra tips from a PhD Microbiologist (pathogen and air quality experience) and avid sewist. You can use fine men’s shirting or high thread count sheets for fabric. You can use a third layer of cotton fabric in center if you can’t access HEPA quality fabric. Also you could use a non woven interfacing for that interior layer. The idea is that the three layers of woven fabric are offset from one another causing air when it migrates in or droplets when they migrate out to not have a straight path. If you use non woven interfacing even better because it is a complex matrix. The entering particulates collide so to speak with the fibers and are captured. Also you can consider a synthetic fabric for the middle layer since many polyesters and nylon are charged and can better capture charged cells. Instead of the pony holders I’ve used fold over elastic about 28 inches long to bind each short side of the mask. This leaves stretchy tails for tying (makes it easier to fit) as you just zig zag across folded over elastic from one end to the other. Many have also used garbage bag wires and plastic floral stems for the nose piece, you can sandwich it in duct tape so it stays waterproof. I suggest inserting it into a 4” casing made with fold over elastic sewn to the lining side of the mask. This way you can reinsert new wire as needed. Lastly after you turn it consider top stitching around to increase durability. Good work guys!
sicplano Very nice with types of fabrics and why- love the details
Thank you
I have many questions I can't seem to find the answers to so far. Is there a way I could speak to you? I always feel like the people with expertise of the medical field are oblivious to the aspects of sewing and vice versa. I'm looking to find someone like you!
sicplano- Thank you! My sincerest hope is that the masks won’t be used. Your comment really helped!
What about furnace filters (flattening the corrugated material) with a 1000 to 1500 MERV rating? Yes they are expensive, but is it worth it to make with these materials instead if one is in their 60s and still having to work in public?
M.A. Enriquez That would work. But. in the end you have to assure a good seal around edges of the mask. In reality the capability of most of your fabric designs is to limit you expelling or inhaling droplets and not so much aerosol protection. But your idea along with those that use HEPA rated vacuum cleaner bags is no doubt helpful. I’m also thinking that those mattress protectors that are made of a fine microfiber sold to prevent urine seepage could also work well. They are pricey but a twin cover could make many masks. You could also double the microfiber layers up. Just don’t bleach that fabric as bleach will weaken it.
He actually knows to sew. He backstitches his seams. Other DIY people don't even bother. Well Done !
I learned to sew from my Dad...taught me to make a vinyl fishing rod carrying case
He did get after it very quickly. He is sailing thru to show us. i do trim my seams, notching the seams, and press. I am going to start like him and assemble, then sew. The Singer also ran lighter while sewing. I was impressed with the machine he has.
Cathy Aguilar
Back stitching I ain’t used by quilters because the top stitching takes care of that we do lock stitches when doing finish work such as he did by sewing all the way around which covered the seams coming from the other direction
Also clipping the curve isn’t necessary. Just finger press the seam open to reduce bulk. And use the back of your finger nail to press it open. Or you can use a pressing ham to iron it.
Most people that wear face masks aren’t concerned with fashion or a few wrinkles in a seam. They just need functionality
I was referring to his general sewing expertise. My comment was a compliment to the sewer. I have been sewing professionally for over 40 years.
Well he did say he's a fabrication fellow at the hospital, which means he creates things and I'm sure that most definitely means he can sew too. 😊❤
Just a thought. I know of some nurses that have been told to reuse the N95. so they are using the handmade mask to cover a new N95 to keep the N95 clean to reduce the chances of infecting them selves when they take it off and on. Then sending the handmade down to be stabilized for the next day or shift. I hope this helps in some small way or at the least gives you another idea. God bless and stay safe.
Very helpful point. Thank you.
T. Gunderson you can also dunk the n95 mask in 70 or 90% rubbing alcohol to sanitize also.
@@occipitalneuralgia2339 If you don't have an abundance of alcohol, does it still help to "mist spray" it on the mask?
A german virologist sugested to put the used N95mask in the oven-not microwave- at75 celcius for 45 minutes. That will kill bacteria and the corona virus
@@bonnievonhegenbart6478 : I wonder if it would cause your Microwave to arc since a lot of N-95 masks have some type of nose bridge wire on them? Just a thought!
Just made my first one. If making for general use, 6" of elastic at each side works for average female. Side edges of mask were turned under 1" to make the elastic casing. Used 5" of craft wire with ends bent in, then inserted in mask, centered and sewed around wire by make a running stitch below and at sides. Any breathable additional inside layer would most likely help to some degree -may try interfacing even. Please realize these are not intended for medical use unless modified by health experts, ie the tape, etc. One final note: DO NOT leave your home to purchase any supplies. Please only use what you have on hand in your home. from a retired RN with a BS Degree in Textiles
@Jodie Dirksen There is a 3m furnace filter at Lowe’s that is a .3 micron. Good fo bacteria and viruses. I think I paid 15.00 for it today. Taken apart it can be a layered filter. And would make minimum of 50 at double layer. Also we used aluminum electric fence wire. I did the cutting the boss lady did the sewing.
@@drmachinewerke1 Filtrete 1900 by 3M is the AC/heating filter
Thank you.well done.
@@drmachinewerke1 Corona virus is reported to be 0.05 -0.2 micron. www.thelancet.com/journals/lancet/article/PIIS0140-6736(20)30211-7/fulltext. So, be careful. N95 masks filter particles down to 0.3 microns. The theory seems that aerosols will be caught on the outside, and virus retained. Otherwise, HVAC filters sounds like a plan to me. Good luck.
Also, rather than cotton, a cotton/poly blend for the outer layer will add water proof qualities.
Tips from someone who sews regularly:
1.) Fold your material for double layer and you only need 1 of each piece because it makes a mirror image for 2nd piece. For lots of masks, glue stick the pattern to a piece of cardboard to trace around your fabrics.
2.) If you want a moldable nose piece, you can use plastic coated gardening tie wire doubled up to about 2 1/2 to 3 inch length. (Don't use bare wire as it will rust quickly) You can tack it in place by hand or enclose it in a separate strip of fabric and as you sew your edge it catches your strip. If you expect to wash it over and over again, I would enclose it. For me I used the tack method for masks that were already made and for new masks I enclose them in fabric that kinda looks like the paper over a straw but smaller. Or, you could tack it and hide under your top stitch hem.
3.) If you happen to have an overlock machine/serger you can save time and get a better product by overlocking all of your major seams which will prevent any fraying and sew the seams at the same time. Then use a regular machine for the final top stitching if you choose to top stitch. If you don't have an overlock machine, I would fold the edges of the mouth piece edges twice, iron and then top stitch. This way your fabric won't fray.
4.) I happened to have a roll of elastic that was much thicker than I needed. I simply trimmed it down to thinner pieces.
5.) You do not need to leave a section open to turn inside out. Your mouth piece opening can be used to turn right side out.
These should not be top-stitched. The reason why is that it will interfere with the placement of the hepa insert. It also causes unnecessary holes in the fabric that will allow virus to go through more easily. Wire or metal also should not be sewn in. That makes the mask unwashable as the wires eventually rust and break.
Overlock /serge seams are great!
@@jazzcatt To clarify, the option of a gardening tie wire is plastic coated, which should not rust as easily as a bare wire. I'm sure there are better options. I had to use what I have around the house. The top stitching is around the upper and lower edge which would not make holes in middle of mask and the mouth piece seams would be folded over twice and top stitched prior to assembly of mask which would not block the insertion of filter. Just the proper way of edging if you don't serge the edges.
Carilyn Jurgeson Thank you 💜
@@carilynjurgeson6178 if you use a piece of electrician's wire (Romex) it will not rust as it is made from copper.
@@carilynjurgeson6178 Hi again, Carilyn. Apparently I didn't write very well. Using what you have around the house isn't a completely negative thing, for your own use, with the understanding of something is better than nothing.
As for stitching, I completely understand what and why you said what you said. It's for durability. My thought, especially for those having to use them in a professional setting is: When top stitching, one is putting holes with the needle through every layer of the fabric. Those holes are lined up and will stay lined up creating an invisible (to you) pathway for virus to get through with a more direct pathway, even after washings.
It's so darned difficult for me to explain. I wish I had some high, and ultra high magnification videos or photos to show you. "A picture is worth a thousand words."
To demonstrate, as you are a seamstress, I ask you to put a very large diameter needle in your machine that you would use for sewing canvas or heavy denim. Then take the thinnest piece of fabric scrap you have, perhaps a fine silk, and sew through it.. Now remove the thread as carefully as you can. Look at the holes. Now try to make those holes 'go away' by rubbing the fabric
N-92 rated masks (and even the paper surgical masks they ask you to wear when you go to the ER with flu symptoms) are not made from woven cloth. They are made of layers of compressed random fibers, similar to craft felt or most interfacing fabrics.
They are not stitched, they are heat sealed , for the reason I mentioned above.
I would recommend using a ball point machine needle & ball point pins, because these pins separate the cloth fibers, unlike regular needles & pins which cut through the cloth fibers createing micro holes.
you think detailed like me
@POSEYSWHIMS Great point!
I wouldn't even use pins to hold it together I would just use wonder clips. I agree about the machine needle. However, I work in health care and they said it passed the fittest even sewing it the way they did so that is a very good thing.
@Bridgette Hall I agree that pins are not needed. But my point would be that on an approximate 8” of fabric, it’s simply not necessary.
Ball point machine needles are for knit fabric and don't poke holes but slip through the knitted hole. Woven fabric is very different than knit and need sharp needles to poke a hole into the tight weave. A ball point needle will rip bigger holes and be hard to sew woven fabric and may overheat the motor of your sewing machine.
Hint- If you are making a number of these at the same time you can save a ton of time by sewing all of one section at the same time, ie all the mouth piece seams, etc. , rather than one whole mask and then another whole mask. Also run the pieces together one after the other without cutting the threads,( just have a basket or bin ready to catch the pieces if you have enough to fall behind the sewing machine.) If you get them close enough together you can cut them apart with just one snip! Stack them up and do the next step.
Great Idea.. Thank You !!
That’s how I sew quilt pieces 😁 great tip for ppl. Thx
Joan Chantler thanks for the suggestion!
Yes, this is how I am putting them together now. Well, in stages since I iron down seams, fold over seams to save time at the machine. I wish I read down further before I started because I have been using pins instead of clips. Not something I knew was the new thing in sewing.:(
exactly what I've been doing like I'm doing a quilt
As someone who hasn't sewn anything beyond a straight line in 25 years, I'd just like to throw some love toward Clayton, the one-handed sewing badass. Kudos and a shot of whatever you're drinking, Sir.
I agree, that fella makes it look a lot easier than it seems! I've sewn off and on for many years but not often enough to compare to that young man.
See this ruclips.net/video/-tvOX_f5IWw/видео.html
Thanks, @kathyparrow1390 for the compliments. Just was reflecting on this experience and saw this comment. Hope you all made it through 2021 sane and in good health.
From Australia, I wanted to make masks for my family, this is the best tutorial I have found thus far. Many thanks for the pattern, time and share. Stay well
Some advice from a former Army medic 1963-66) . To improve your filter add some plain coffee filters (2-3) trimmed to size . If you want to kill some viruses , spray one of the filters with a 1% iodine / alcohol solution and let dry overnight . Place treated filter in first and place plain filter on top . Iodine kills bacteria and viruses 99.8% on contact . You can use a 1% povidone iodine mouthwash (otc) liquid as a spray source also . We used an iodine glycerol spray for throat infections when nothing else worked . Not 100% but much better than nothing . Stay safe !
AWESOME!!
Wow! That's great information! Thank you so much for posting this.
Wow! Key info right there!
yes, the cdc website shows a non-sew (folded bandana) facemask with cone-type paper coffee filter inserts.
Old armymedic Bill thank you.
For the nose bridge, you can use aluminum foil - fold it over itself over and over - a 6cm wide piece gives a firm, bendable nose bridge.
R Kirousis thank you! I have this at home
Aluminum bezel wire is perfect
Pipe Cleaners also work well
@@Bionicmarvel Bungee cords is good for elastic also. Can the aluminum foil hold up when washing. Thanks Jo Jo Hoss
@@jo-johoss3074 many handy man stores sell many sizes of bungee cord by the foot and I have seen it pretty small in width ty for this awesome sugestion
I, a left-handed guy using right-handed scissors, cut up an old shirt, figured out how to use a sewing machine, and in three hours made one of these masks.
I, too, am a left-handed person -- I eat and write left-handed, but throw, bat, golf, bowl and use scissors and knives right-handed. I also happened to be the only left-handed person in my immediate family, so -- lots of exposure to right-handedness!
raedwulf61 yes mate good effort x
Buy some left handed scissors. Makes life a lot easier.
Fantastic!
@@jillhoskins4551 I am like you too
This is a beautiful thing! The instructions are clear, the pattern is simple and straightforward. I applaud your efforts. I was reluctant to make a bunch of surgical style masks for donation because I didn't think they would offer enough protection for caregivers, but this mask seems to have solved the problem of filtering and a tight seal. Thank you for everything that you do.
I need one please ! Cna.
@@lauraleemara4342 If I knew how to get in touch with you I would send some to you.
Wanted to leave this here as a material option:
m.ufhealth.org/news/2020/uf-health-anesthesiology-team-devises-respirator-mask-made-existing-hospital-materials
GUNNER BASS but how can we get pricing and purchase it ?
Lisa George I don’t believe H600 is available to the public but Hospitals can save this material for use in masks. It can be sanitized according to the article. I was able to find H500 in a google search, but again that would be less filtration than an N95
I just Priority mailed you folks a stack.
Hope they help. Thank you very much for the pattern. It seems a lot more effective than the other one that's real popular.
Finally, after 2 1/2 hours and some tearing out of reinforced seams, I finally have one completed mask! Who hoo! Pretty proud. Video was a great help:) Now maybe other one will go faster.
Congrats!!
keep on truckin= see my note how to save time by ganging pieced together
Same here... LOL
My first one took forever. They are faster now and look better too
congrats! :) First time is always the hardest/longest! hopefully you learned a lot :) I find that the second time I do *anything* it takes ~half the time, and the gets even faster from there. The 5-10 minutes per mask time estimate is for when you have everything setup and practiced!
I purchased twist ties from Lowe’s (like a bread tie). They are in the gardening section. They can be purchased in pre-cut sections or on a roll. The roll gives you a lot more
Also the one Dollar Store garden aisle for floral wire. Parchment paper for the DIY filter.
@@LG-universe Hi- the vacuum cleaner bag is way better- viruses are tiny and can go through paper. HEPA vacuum bags are meant to filter
Did the twist ties work?
Tina S it did! Also, I went to Walmart today and purchased some of those stretchy loops you normally buy for the children’s pot-holder looms. I cut one end and then tied a knot in it and it worked great for the ear pieces
Tina S also, I ended up using two twist ties instead of one. Gave it a little more strength
I'm a former seamstress and scientist. I would make a slot for the filter to be removed so you wash it and put in a new filter if the filter is paper based and would dissolve in water. That's how I'm doing mine. I'm making a mesh lining with sides open to put a filter. At dollar tree you can get a large roll of plant holder green wires its round and comfortable to make the wire bridge. You have enough for maybe 10 masks for a dollar. I also got bias tape for the ears or ponytail holders or large rubber bands. So many DIY things. Also remnants from Walmart or home.
Heloise Abe do you know what they used for the back fabric piece that is white? I can’t figure out what fabric they used or if they used the the hepa on the back as well?
It was shared with me that the product called Halyard H600 2 ply spun polypropylene is being made into masks with the support of the University of Florida. Dr. Bruce Spears a professor for anesthesiology the U of F College of Medicine recommeded the use of this product based on the manufacturer's recommendations. He stated that the masks are 4% more effective than the N95. This information is on the University of Florida website. I am a University of Iowa RN and have a BSN. I have been sewing many years also,.
Barbara Dos are the Hepa filters machine wash safe?
I have seen other video tutorials cut small strip from Aluminum soda can and sew it into the fabric for the nose bridge closure.
Don't do this. Why risk cutting your fingers to trim off aluminum cans? If you want aluminum, use several layers of foil.
For the bridge piece I'd recommend the closure thing that's on the top of a bag of coffee.
That's what I have been saving when I buy the bag coffee. I think it would work.
I run t-shirt yarn through the channel up one side- over the back of the head, down through the other channel. One piece. cut off end. Cinches tight on top & ties behind neck. Everybody has t-shirts. Cut in 3/4" to 1" strips. Doesn't unravel, holds up to sterilization, very stretchy & can individualize the tie.
Hi Elidgh: Can you show this in a picture?
Wish I could like this comment a couple more times. Thank you, I've been thinking about that. Around the ears is not as effective and can easily fall off.
Super clever! And I have some!
@@johnbarfield782 Don't have the option here to post a picture. Just leave a long tail, thread the yarn up one channel, across the width of the mask , down the other channel, leave another long tail & cut. Only have to tie once around the back of the neck.
@@eilidghmacdowell3204 do you have sn idea of length? On the HK mask, each side tie is 66-72cm/26-28 inches but it won't need to be twice that since you're only tieing one end
I love this because it's coming from health professionals! Thank you for putting this together!
If you need a mask, you can contact me, I have a batch of masks, can be shipped from the United States, first come, first ship, limited quantity, 49$/50pcs.
The fact that the man is sewing is awesome! Love that guy! Also, thank you for the informative video. Men who can sew are HOT! and thank you for your service from one first responder to another!
Everyone out in public should wear these masks - or similar. While their ability to stop you catching the virus is limited compared to a P2/N95 mask, they are very good at stopping you spreading it. Which means if we all wore one, spread of the virus would stop. If we all take responsibility for not spreading it, we greatly diminish our chances of catching it in the first place.
Well said! These are the words that should be told to the American public who are being told not to wear masks. (I've been to two doctors visits in march wearing my N95 and told with a smile that it's pointless and won't help.) A bit of a crime here due to the fact that the motivation is to save whatever N95 masks are available for health workers on the front lines. When people ask me if I'm sick and why am I wearing a mask, I tell them that I'm wearing it for their protection, not mine.
@Drakilicious ///which is one reason why folks even wearing full proper gear are still getting sick.///
You dont understand. Your mask isn't for your protection, it is for mine. The mask I wear, is your protection. If we ALL wear them, we protect each other. That's why the masks dont need to be particularly sophisticated - even a scarf helps.
I’am a NYC Public Health Nurse and a crafter! Thank you so much for making this video! I will be making these for my family, friends and colleagues to wear when we travel outside of work. I will be donating some to your hospital as well! Thank you again and stay safe!
Target has 100% cotton sheets, a twin costs about $10, you can get at least 20 masks from one. The twist ties from bags of coffee work really well for the nose piece, and they lay flat. Can get 100 yards of 1/4" elastic on E bay for about $20. It's so impressive to see this young man sewing! Ability to sew is a valuable resource!
A man who sews! Way to go Clayton.
See this ruclips.net/video/-tvOX_f5IWw/видео.html
For everyone asking for the pattern, click "show more" under the description.
There's a link to the pattern there.
looking the the link for the pattern
where is this?
@@crystalbridgman6705 Right under UnityPoint Health - Cedar Rapids where it says
"Sewing Fabric Face Masks
Thank you for your interest in sewing fabric face masks.
NOTE: These are NOT meant to replace manufactured masks." If you click on "SHOW MORE" the pattern links are there.
@CC Sorry, I haven't made any masks. I just was watching several different mask videos to see if there's one mask that seems to be best to make, and noticed the question about where to find the pattern. Is there anyone else here that can answer CC's question?
Thank you! I never would have found the pattern. That was so helpful!
Thank you to the Maker Dept. and all of the work/research you did to provide the patterns for the rest of us. I am here in California under lockdown. There is no reason that I cannot sew some of these to a) keep me busy and sane and 2) provide a level of safety for those I love and care about. I appreciate y'all!
FOR THE NOSE FITTING PORTION OF THE MASK:
After reading someone else’s idea about cutting strips from aluminum disposable pie pan (etc.) for the nose fitting portion, which is a good idea, I came up with what I think will be an easier idea, that will withstand washing (without rusting, as some have been concerned about for pipe cleaners and twisties, which also the paper can possibly come off when washed).
This is something almost everyone has at home already:
Heavy duty aluminum foil.
1. cut a 5” x 3” rectangle.
2. Fold in half lengthwise and crease.
3. Open back up and fold each side to the center crease.
4. Fold the ends in by 1/4” to 1/2”.
5. Fold back in half lengthwise.
(By folding in all the sharp edges, hopefully it will make it more comfortable to wear.)
I tried fitting it around my nose and it seems to keep its shape well. I haven’t tried inside a mask yet, as I’m still info gathering, as I want to include all the best ideas on my first go.
I plan to insert it into the top of the mask and then sew around the ends and bottom of it, prior to closing up the bottom opening of the mask.
So, I recommend experimenting. If you don’t have heavy duty foil, just cut your piece bigger, say 5” x 6” and fold in half to 5” x 3” before following the above instructions. Size can be adjusted as you see fit.
Susan Mei wonder how it would hold up washing in hot water and drying. I may have to try that. I tried pipe cleaners and they didn't work. Not safe!
Mary Turpin, after thinking about it for awhile, the only down side I can think of, is that if water gets inside the folded foil. However, if they are dried in a dryer, I’m pretty sure the water would evaporate. I don’t have a dryer to test my theory on. But if you put a sample folded up piece inside a scrap of fabric ; baste around it, & throw it in with a load of clothes to wash and dry, you could see how it turns out. Could then take out the basting and see if it’s dry inside.
Susan Me
You could also use Aluminum Adhesive tape but into thin strips - a couple of layers holds the shape really well
👍🏻❣️
I find that securing the ear loops by folding the mask outwards creates a better seal around the upper cheek area.
good catch!
If you need to replace the elastic as it wears out, folding the mask outward also makes it easier to remove stitching and replace elastic. Outward fold also reduces chance of skin irritation from the seam edges.
yes good point!
What do you mean "folding it outward"? I'm sorry because I know it may be hard to explain things like this, but if you could... I would like to sew some and of course would like them to be the best they can be.
Never mind. I totally get what you meant after thinking for a minute. Lol
BIG BIG BIG Thank you to all medical professionals and essential business employees. There are no words to describe our utmost appreciation for the risk you take every day you go to work to help those in need. Thank you thank you.
Hepa filters have fiberglass which is not health y’all
Take a minute or two more and make a gathering stitch line across the top of the mask. It could gather the fabric enough to seal it right under the eyes.
Air or virus particles can seep through the gathered area. Make mask smaller or use the double-sided tape for fit-test.
So... I experimented with a few different materials for the nose piece and the BEST one so far is PAPER CLIPS! even better is you use the ones that are already covered with plastic so they will not get as damaged by water when washing. I cut one paper clip in half with pliers, then interweave it into a piece of fabric, then I use double sided fabric adhesive to attach it to the bridge of the nose on the "wrong side" of the filter holder (the mouth piece of the pattern). For the elastic I was thinking a few things would work if you wanted something that goes behind your head instead of over the ears- those replaceable bra straps work pretty well, but elastic or just ribbon with a cord lock is great. You can get cord locks from Amazon for like 6 or 7 dollars.
@Naama, I’m going to try the paper clips! I’ve been using wired ribbon.
Which cord locks did you buy? I bout some on amazon, but they’re the wrong kind.
i‘m sewing very similar masks, but only out of 3 pieces. it‘s actually not necessary to sew 2 pieces completely together to get a mask with a good shape that lies flat around nose and chin. sewing out 2 triangles („abnäher“ in german) does the trick. this actually makes the process even faster
@@lolalola1349 here is a link to the pattern, the button to download it in pdf is under the second video. i have used old ikea pillowcases which work perfect. it´s a thinner kind of cotton which is quite comfortable to wear and perfect to breathe through ;)
kaidso-onlinekurse.de/mundschutz-mit-einlagetasche-selber-machen/
See this ruclips.net/video/-tvOX_f5IWw/видео.html
use wonder clips instead of pins it saves time. I also added non-woven interfacing. headbands work better than ponytail holders. wrap wire in duct tape for waterproofing and safety for sharp edges i used doubled over floral wire
I thought the non-woven interfacing would be a good option too however a nurse on another page said it melts when put in the autoclave for sterilization!
i would not be adding any interfacing whatsoever please check with the people you are supplying to and ensure they use it one time only if you have already added the interfacing.
i just love how we have all come together to help xxx
I was doing the dbl floral wire too, but gave up on ear elastic during the 1st week of March--it just hurt too badly. I found that a soft cord ties works well or make bias-tape or self-fabric ties. Then you can even tie the top ones up in your ponytail and its way more comfortable.
I would also add that research has not supported most of the parts that you are using. There is currently no known research that says it is possible to sterilize random pieces of wire, duct tape, or interfacing of any kind.
If you use such, it will not be possible to sanitize it and you will either be infecting yourself or endangering whomever you provide it to.
Yes, I only made a couple with the wire--so I went back to only cotton and cotton flannel--something you can throw in the dryer for 30 min on high. So far, I've made about 140. (clothaholic, here)
All of us should be wearing a mask when we go out to shop & get our medicine.
If nothing else it reminds you not to put your hands in your face. I was on the bus the other day and this guy had his fingers all inside of his nose, completely unaware of what he was doing.
L W That’s gross!
@@John-mu2js and I am sure he didn't immediately sanitize his hands, which means any germs in his nose ended up on anything he touches. There should be masks (reusable or washable) and sanitizer made available to everyone on a bus. You couldn't get me on a bus or in a taxi these days unless I was wearing hospital-style PPE.
@@lydiahubbell6278 I was practically thrown under the bus by the public in our town but I still make masks and sell them. They all said the CDC does not order folks to wear them and that I was creating panic. I just said I dont care.... my choice to be proactive.
@@jilldosch1365 Trump said today that it is a good idea.
Thank you .health workers and all first responder for all you do.
Thank you for emphasizing the masks were a "better than nothing" substitute.
Fred Cole: The masks are NOT better than nothing. They are neither safe nor effective against the COVID-19 microbe, but lead to a false impression of safety and effectiveness. Some will likely walk around wearing these home sewn made from fabric stash masks thinking "I'm wearing this mask so I can't get infected" OR "I'm asymptomatic but no worries -- I can't infect anyone while I'm wearing this mask"
A false impression of safety leads to dangerous behavior.
@@madasahatter4489 procedure masks of any sort aside from niosh only serve to protect transmission to others. I've been telling everyone just because the CDC relaxed their guidelines doesn't mean the viruses have.
@@emeraldjay: Clever post. Especially the part about the viruses not relaxing. We like to read source materials so please reveal, if you would, the source of your statements:
1) procedure masks of any sort aside from niosh only serve to protect transmission to others and
2) the CDC relaxed their guidelines
Thanks much!
@@madasahatter4489 web.archive.org/web/20150102025655/www.nursingcenter.com/lnc/static?pageid=811924#63 This link gives an easy to understand explanation of the different types of PPE and their uses. The ordinary procedure masks will protect your mouth and nose from a direct cough or sneeze. But there is not an airtight seal such as with the N95 type masks. Those need to be fit tested.
Second point of the same article, it says the procedure masks are single use only. Something the CDC recommended until our healthcare system started to run out of PPE. www.cdc.gov/coronavirus/2019-ncov/infection-control/control-recommendations.html This link gives the CDC's take on infection control. Both articles lead me to believe guidelines were relaxed because there is a shortage. I doubt very much the change will be permanent.
Madasa Hatter we have continually heard this up until this week. Now many hospitals around the country are asking sewers to make these fabric masks with the filter inserts, so that healthy STAFF wear them. So actually, the masks ARE helping the STAFF when they work with potentially infected patients. So please please stop disseminating old news. If they didn’t help at all, hospitals would not be asking people to make them now.
Also, the masks can help stop a person from transmitting to their mouth, if they happen to be out in grocery stores and such. Many stores don’t even have wipes at the door to allow for wiping down shopping carts. And since this is allergy season, I often have to blow my nose. When away from home, the mask stops the allergens and cold air, and thus, I won’t have to touch anywhere near my nose. So yes, masks can help!
Tips for speed:
Many sewing companies sell a 'furling foot' which puts a double fold (cut edge is inside) hem without a requiring a prefold. It takes time to to swap the foot, so you should probably batch process -- do all them hemming for, say 100 masks.
If it's expected that masks will not be washed many times, using pinking sheers to do the edge may be sufficient, and save time.
Or if you are a true enthusiast, using a serger eliminites the need to put a hem on any edge that is sewn to another piece of fabric.
use of scraps of either fusable fabric, carpet tape, or double stick scotch tape allows other volunteers to assemble masks to keep the person using the sewing machine at full production.
I now use a serger for everything but the side seams and top stitch. It goes much quicker. I don't even tack down the cheek pieces anymore. I pin them to the mouth piece then run it through the serger as 1 whole top and bottom piece. Looks professional. All edges have professional serged finish.
@@carilynjurgeson6178 i made a substitute for this with my 3D printer. There are a few good jig patterns out there for the double fold and the making and folding of the bias tape.
THANK YOU!!!!! The video and instructions worked well together. I am a novice at sewing and found the mask was true to size and much quicker and easier to follow than other pleated medical mask...Not to mention the poor instructions other model I tried.
It took me 1.5 hours on the prototype I designed for a local nursing home.
I added:
1)flannel for the face piece
2)elastic(harvested from old sheet but still in good condition) to bottom of mask.
3)L- shaped pocket top stitched to top of mask to allow for pipe cleaner to be inserted and easily removed.
4) 22 inch 3/8 inch fold over elastic. Threaded through the bottom of mask to make a loop through bottom of mask then stitched at the top. this made it very comfortable to were.
Improvement for next mask:
*A larger face piece to allow for larger breathing pocket. important for larger face.
I've now seen this pattern going around I think yours is the best so far and people are picking up and sewing similar items. Kudos.
You could sew a button on on each side, then the hair bands could loop around the buttons and the ears.
I taught my sons to sew , I not only appreciate the pattern, little different then the one I’m using....but he has “THE EYE” for the quarter inch ....nice
Some key points in the video:
- 1m23: folding over seams and sewing in the pillowcase fashion to create edges that won't fray
- 5m40: description of micron filters that can be used for this pattern: HEPA filter fabric (such as from vaccuum bags), which can be purchased at stores or on Amazon
- 11m48: to create the bridge of the nose, put pipecleaners, wax-covered thread, or the bendy-metal piece from file folders at the top of the pocket
- 14m40: how to insert the nose bridge and add hair elastics for ear bands
- 16m24: how to insert the micron filter
- 17m06: where to apply skin-safe double-sided adhesive tape
Other tips:
- Wash your fabric in hot water prior to sewing to shrink the fabric
- Per another comment, use lightweight, breathable cotton fabrics. Do not use flannel, as this holds the moisture from the breath.
Any ideas of what kind of Vaccuum Bags specifically. I have hepa shop vac but those are coarse paper like.
or overlock
Hope you've made some for donation?!
I don't think hair elastic is going to be comfortable on the ears, I think elastic headband would give more length
Do you have template of each piece for accurate size please?
i used a floral wire on the nose bridge about 4in long and bent in at the ends. I zigzag stitched over it to hold it in place.
Thank you Shelly. I've been wracking my brains to figure out an alternative to the metal bridges for the nose found in PPE masks. THis is a great idea.
Make A Video for us. A tutorial.
Much easier, good idea! I used "flexible wire" green from Dollar Tree- found near the trowels and gardening stuff. It has a really thick coating over the wire. I also made up some metal nose bridges from tin foil roasting pan. My daughter wears a mask all day and she is going to tell me which is more comfortable.
I used hot glue on the ends to keep from or at least delay rusting after washing.
@@joanchantler2498 my daughter is a nurse practitioner and wears one also. I just wanted to protect her and her coworkers as much as I can.
These are very easy to make. I had made some of the pleated masks and this was so much quicker and easier. They also fit the face much better. For now, until I can get my hands on some HEPA fabric, I'm using a thick sewing interfacing for my filter. Better than nothing.
My neighbor made some of these & recommended adding 1/2” to each side for people with a broader jaw to get a good fit. You can always fold it over a little more, but it would be harder to extend them.
The continuous loop tie from homemadeonourhomestead Reusable Face Mask with Filter Pocket ruclips.net/video/lUrGc_-UWkE/видео.html creates a FANTASTIC (and adjustable) fit for this mask. We tried a number of things, but found that jump ropes from the local Dollar Store were the most comfortable and easiest to tie (without slipping). Also the foam-coated garden wire (usually used for tomatoes) creates a nice fit over the bridge of the nose that is pretty comfortable.
This combination also works well over a filter mask (N95 or other) for healthcare workers who unfortunately need to reuse them; this would help to keep them clean and minimize contamination if you first remove the cloth mask, wash hands, and then appropriately handle the filter mask.
Well, that won't stop The Coronavirus at 0.001 Microns in size. Even The N95 Masks only filter our 95% of The Coronavirus Particles.
Easy Tips: For the 4 pieces that require a hem on the straight sides. When using used material such as t-shirts, sheets, etc., mark your patterns onto the material with the hem side of the pattern (straight side) to the already hemmed side of the material. Just mark it 1/4 inch shorter than the pattern. You might also fold the material in half after marking it, pin it together, and cut the left and right sides at the same time. Or as he says in the video; some like to iron the hem sides to make them easier to sew.
Doesn’t pinning make holes?
@@micheleherron7874 you are correct. Pinning does make holes. This mask holds a filter in which you seal the filter area to your face. Never put holes in the filter. But using another attaching method other than pins is best practices. Thank you.
First of all, I like the cute guy sewing. Secondly, I love this pattern because of the ease of access of this filter pocket. Other filter pockets in masks only have the opening on the top or one side and it makes it difficult to insert a filter and get it to sit in there properly. The design of this one makes it so easy, plus it's super easy to insert a nose wire and remove it to wash the mask! I wish I'd found this video sooner instead of trying a million other ones first.
I've been an RN for 40 years; this makes me cry that in the US we are having to make masks for our healthcare workers. I truly never expected to see this happen in our country.
Yes, but isn't it beautiful the care people have for you and your coworkers!
It makes me cry too, here in Hawaii on the big island we have been so lucky so far, few hospitalization if any and no deaths here yet. I am so sorry for everything
That so many are going through. May every one stay strong and well and I know so many medical workers must be so overwhelmed.
I am praying that you be given strength and wellness and I will continue to sewing masks for anyone who needs one .
I’ve been an RN for 36 years. Definitely nothing I’d ever thought I’d see, either. I am disabled now, so I am sewing masks, also. It’s the least I can do for my fellow workers 🥰. Yes, @Marie R, it’s great to see people caring for my brothers and sisters ‘in the trenches’.! Love to all!💕
Marie R yes!💕💕💕😷🇺🇸👩🏻⚕️😇🙏👍
This November you have the opportunity to remedy the problem because it's not going away until there's a viable vaccine or treatment options.
I found it and I'm done sewing for my Saturday. I'll mail them out Monday. I hope you all stay safe.
Please, may we have the dimensions, or better, an actual pattern? Thank you so much!
I wanted to thank you for putting up the mask pattern and tutorial. Due to the Corona Virus, I am making many face masks for family, friends, and neighbors, and your pattern and video were very helpful. Thank you for generously sharing your time and talents with the world.
This is amazing!!! I had a supervisor tell me that fabric masks are the worst and that they don’t help therefore we shouldn’t be wearing them! I couldn’t believe what he was saying. I did my research and found out they do work when used correctly and although they aren’t as effective as N95 they are a good alternative specially for those who want to use them in public places not necessarily while tending to patients. But this is great! We’re in such short supply at the hospital where I work and people want an alternative! Thank you!!
Anything over your mouth when someone sneezes is better than nothing!
I did notice that when I put it on the mouth piece tended to roll up, so I favored the outside shell to the mouthpiece and top stiched it from one side of the mouth piece to the other. Also I'm using shoe laces instead of hair ties to keep the pressure of my ears. It makes a very secure fit.
Gardeners are familiar with floating row cover better known as Reemay. It is a non-woven polypropylene or polyester clothlike material, often called Reemay, Garden supply catalogs provide this filter material from small amounts to rolls that cover farm fields. It is very similar to the filter material used in n95 masks. It resembles a very stiff non-wovan interfacing. I plan to make lots of these inserts for my home mask use.
Thank you so much planning on making these for my community. Southern Illinois. Thank you for your service and please STAY SAFE!!!
Hey Cynthia. Aside from making masks, where in So. Illinois do you live? I was born in Carbondale and am just curious. Both of my parents graduated from SIU. (It was So. Ill. NORMAL when they were there.) Diane Ansel
@@dianeansel2418 ruclips.net/video/NwTrmomcZa4/видео.html
Thank you so much for putting this pattern and tutorial out there!!! I cut out a few of these patterns to make up to wear for myself... I have five ticks against me for risk of infection, but my job is "essential" with the public, so I will be wearing my new mask to work tomorrow.... Stay safe all ~ Blessings ~~~
You may try cutting the chucks pads Extrasorbs ES 350 for your inserts!
Construction tip: backstitch all seams about 1/8 - 1-4 inch to prevent unraveling. An alternative to back stitching would be to knot the threads at the end of the stitching, so you would have to cut them longer. And do this for all seams.
Also...a zig-zag stitch works similarly to an over-lock and can also be used as a top-stitch. It prevents fraying better than straight stitching.
This pattern is incredible. I've made masks for my friends and family.
Thank you for this easy to use pattern. Our group has made of 400 of them this week for local service providers and families. We cut and inserted Merv 8 filter materials as that was what we could get at this time. They fit nicely and we have had nothing but positive feedback. Easy to modify sizes and fastener types.
Thank you so much for your very informative video.I have been making your masks for our local Big Lots store where my husband works. Since we are both retired X-ray techs in our seventies we know personally that masks are very important. So far I have made 42 and I have many more cut out and ready to sew. Since I am not making these for a hospital setting I have made a slight modification. I make a second set of mouth pieces so that when put together wrong sides together there are no raw edges and you can very easily put a folded paper towel between the face and mouth pieces. Just remember to remove the towel before washing. We've had many, many complements about your masks and how nice they look.Thanks again. John and Marie Wilson
I finally made one of these and it's fantastic. I sewed a channel into the mouth piece (after sewing them together) but before attaching the back to the front. I sewed it to the top first for a pipe cleaner with a portion hanging evenly off each side (it's wider than the mouth piece). Then when I sewed the front and back pieces together, I caught the rest of the channel in between the layers. It's comfy and fits the pipe cleaner perfectly.
Wish I could see this
I'm a novice at sewing, and several family members wear glasses. Thanks for this tip. I'm still trying to visualize what you mentioned, but I'm sure I'll figure it out.
@@greenearthblueskies8556 I wish I could share photo's.
@@martharankin7781 I wish I could share photo's.
@@donnasmith2720 I do too, but I have tons of material, so if I mess up, I can redo it until I get it. ❤️
ensure that auto-fit is not selected when printing the pattern to ensure pattern measurements are not altered
Where do you find the pattern. I can't see it. Thanks in advanve
@@lisag3424 In my opinion, DIY masks may be just psychological comfort, in China, everyone needs to wear a mask, and also need to take a temperature to go in and out of various occasions. Why wear a mask, because the mask can protect against dust and air particles are inhaled, this mask does not have this function at all. If you need a mask, you can contact me, I have a batch of masks, can be shipped from the United States, first come, first ship, limited quantity, 49$/50pcs.
@@lisag3424 just under the description of the video.
Have been making some masks. Size info. Top of nose to mask edfe with elastic strapp. -- each side medium ladies = 14 cm / 28cm total Large 15/30cm men. Xl men and large noses 16/ 32 cm. Some masks will have to be made for long faces may have to employee specific.
At home cloth or paper filter can be treated with solution of dish soap or citric acid. Soak and let dry. Do not rinse out solution. Wash. Rinse. Treat filter and mask with your desired solution and let dry ( preferably in direct sun light.
Will make sew well. Heavy washing and boiling may involved .
Love.
I sent disposable rain panchos to my daughters surgery center to serve as gowns. I think I paid $2 each on ebay. They are perfect.
In my opinion, DIY masks may be just psychological comfort, in China, everyone needs to wear a mask, and also need to take a temperature to go in and out of various occasions. Why wear a mask, because the mask can protect against dust and air particles are inhaled, this mask does not have this function at all. If you need a mask, you can contact me, I have a batch of masks, can be shipped from the United States, first come, first ship, limited quantity, 49$/50pcs.
@@user-bp4zn5pc2z Yeah, i know that. In china, we got message from official website, cotton masks is useness for this. If you do not mind, you can visit tweet to know more.
This is the best mask pattern I've seen so far. I made one last night and it was easy. Thank you!
Good job! It's refreshing to come across someone who actually has common sense and uses their God-given brain to take positive action instead of bitching, whining, complaining, finding fault and gossiping!
Thank you for all that you do. I have made some for work. I used the wire option because it feels better. Likewise made some for my colleague s, friends and family. Oh I also used pipe cleaner bent in half to make it nice and bendy over my nose.
Some are requesting the mask to wear over the regular hospital mask. Instead of changing mask between patients , they can keep wearing mask and cover with the fabric mask. Therefore they change the fabric mask and wash them all at the end of the day.
Hi Gail Carrol:
Please consider that anything worn EXTERNALLY over a N95 respirator can be contaminated by the COVID-19 microbe. So, if one touches the externally worn fabric mask, or removes it (which requires touching it) or attempts to launder and re-use it (which also requires touching) that person will likely contaminate his/her N95 respirator as well as hands and everything else that touches the contaminated fabric mask.
Moreover the COVID-19 microbe is so small that it can only be seen with an electron microscope. By comparison, the openings in fabrics - woven or knit - are huge. Expecting a DIY fabric mask to keep a N95 respirator clean and re-usable, is akin to expecting chicken wire to stop blowing sand.
This is why PPE supplies are disposable and not re-usable.
Finally, we’ve seen NO scientific evidence that -- as some have suggested -- buttressing DIY fabric masks with coffee filters, air conditioning filters, vacuum cleaner filters, or any non-medical grade filter will render the DIY masks non-permeable to the COVID-19 microbe. In the absence of such scientific evidence, believing otherwise and encouraging others to believe otherwise, creates the false and dangerous impression that wearing such a filter buttressed DIY mask protects against being infected BY or infecting others WITH the COVID-19 microbe.
We get that people want to help by sewing masks -- but for the above-stated reasons, reliance on DIY improvised PPE to wear over N95 masks is neither effective nor safe for HCP or anyone else for that matter.
Wish it were different, but it just ain't.
Want more PPE supplies to be available now and in future? Call and write to your state and federal legislators. They’ll pay attention if enough people speak out.
Madasa Hatter Some of the nurses in my neck of the woods are being given one N95 mask for the entire year. Some are told to wear bandanas because it’s better than wearing nothing. Everything I’ve read has stated masks will guard against, say, when a person sneezes the virus is carried on the microscopic fluid particles in the air, and that these will stop. The N95 masks aren’t 100% impervious either. I read the virus is .2 microns. N95 stops up to .3 microns. It can still get through it. But the more layers it has to travel through the more chance you have to not get infected. And if it comes down to wearing nothing, or wearing a DIY mask...I’m sure people will choose the latter. We can write our congressman or governors all we want...it doesn’t make PPE magically appear if it just doesn’t exist because they can’t manufacture them fast enough.
@@madasahatter4489
Serious stuff here!
Listen up people!
Thanks for posting ! !
Tracey Mills Precisely. We’ve been provided one regular surgical mask per week to be worn for all direct patient care. By the end of day 2 of wearing my mask this week, the material had already become compromised enough that I was basically needing to gasp for air. I don’t know what method is going to be safest-I’m tempted to put surgical mask over cloth masks to keep the inside of the surgical mask clean and dry so that I can still breath by the end of the week. But I know that gasping for air while I’m a couple feet away from patients who are no longer being provided masks is almost certainly less safe than some of the alternatives shown/discussed here.
Are materials like in baby wipes less porous so as to filter better than ordinary fabrics that many people are using??
I would love to have some of these available in my healthcare center as a backup! Need to find someone that sews now!
Thanks for sharing!
Don't know where you are located but on Facebook there are several groups sewing masks hospitals and centers. Do a search. God bless
Forget to say one group is seamstress unite in Facebook
Try www.asg.org/membership-info/chapter-locations/ - you can enter your zipcode to find the nearest chapter of the American Sewing Guild.
Put out a public notice. There are millions of sewers looking for a way to help while we are home.
If you can add the double sticky tape I will make and send you masks. Where are you located?
No joke, no foul... a man that knows his way around a sewing machine in these days and times is about the sexiest thing I've seen in a while.
I would recommend giving a list of materials needed to make the mask and the dimensions that are needed for the pattern pieces and show how they're cut out, at the beginning of the video, in order for people to mimic the mask and make it. I'm kind of confused on how to make it! If it's at the end I wouldn't know I stopped watching it because of there being no guidance at the beginning!
The pattern and materials and supplies are listed in the writing under the video and above the remarks/replies.
it's literally in the description. How lazy can you be.
Reece Lewis just click on the copy under the video to get the actual links to pattern and instructions. Read through everything, and watch the video again. It’s very clear and easy to understand.
@@locant23 they probably are not lazy as they are going to do this they may just not know how to look for pattern, that's my next step, to look for pattern hope I'm successful and not lazy.
locant23 how mean..someone not familiar with RUclips videos would not know that. We are all just doing the best we can.
I really like this pattern. It is similar to but improved upon the pattern I was using. I am washing my cotton fabric and drying on high heat to pre-shrink. I then iron before cutting the patterns. Your video is appreciated. Thanks.
Where can I find the pattern?
Great idea ty
@@edithpeacock7447 click show more under the description and they have a link
I have been using this pattern with a small adjustment. I use the Face 1 & 2 (2 of each makes the front and inside). I use the Mouth peace to cut an interfacing from Pellon's Tyvek. Sew the Mouth peaces to the inside Face peaces. (This replaces having to change a filter) Tyvek is waterproof and breathable. The only place I have found to purchase it is JoAnn's. And I use hair bands purchased at the Dollar Stores for the ear peaces.
This makes a very nice mask that is comfortable to wear and it is washable. Tyvek says it should be air-dried. I had a lady tell me she washes her mask it the top shelf of her dishwasher.
I seen on a RUclips video by:
(My Pocket Pediatrician) she was useing a Air filter 3M Filtrete Elite Allergen Home Air Filter 2200 and took them apart and used the filter. Be careful when taking the wires off they will cut you. She then cut the filter in the size of the mask and placed them in the masks she's making. I hope this will help others. I have not tried this but wanted to put that out there. Stay safe. And thanks for sharing your ideas.
Rosalina Hernandez Problem with air filters is that you cannot wash them. These masks should be reusable. They are way to time intensive to make to be thrown away after a single use. Non-woven interfacing in between the cotton is ideal.
@@langrock74 That's why there is a filter pocket. Wash the mask, insert disposable filter.
Randy Jacobson That would make a whole lot of sense;-) Thanks
is it good to breath in the fiberglass that the home furnace filters are made from?
@@piinocchiio5730 Don't put anything with fiberglass anywhere near your nose and mouth.
I am using ties instead of bands, as the bands hurt the back of ears. Also I am using the piece from the coffee bag for nose part
Thank you for this! I made eight of them. I used the hair bands in two but added cording or shoe string for the others. I also used 16-gauge jewelry wire (it's what I have on hand). I looped the ends (not flat and tight) with a rounded end, to keep the wire from poking through. For family members, I used the filter lining from a vacuum cleaner bag. It is better than just cotton fabric (or no mask at all). Again, thank you!
Joann Fabrics is giving out kits for making masks. Once they're made, you can bring them back to Joann and they will then distribute the masks to medical centers and hospitals in need. Call your local Joann Fabrics to see if they are participating in this program.
Ahhh.. That's great.. Thanks
A better use of stretchy t-shirt type fabric... if your're low on elastic or bias tape used for securing the mask to the face, a stretchy t-shirt can be cut into 1 inch wide long strips then / when pulled it curls. Making a substitute for tie material.
The one in Travers3 City, MI, is only giving out material now. You must find and purchase your own interfacing, thread, and preferably some plain (not print) material to use for the inside of the mask. That way, when the user takes it off, they know which side is which. They can either take it off and keep the ‘ contaminated‘ side together to keep it from touching other things, or the clean sides together, to make sure it stays clean. Wearer’s choice.😁
Thank you Joann Fabrics, always wonderful!
Check with your hospital or health care provider first. Many hospitals do not want the masks made from Joanne’s fabric scraps. Many hospitals are giving out Two-ply nonwoven fabric and instructions to make the masks they need.
Spraying or rinsing the fabric masks in vinegar and letting them dry will create a lower ph and less welcoming bacterial and virus surface.
All hospitals are using their laundry facilities for all new masks before they can be worn, so don’t bother with vinegar.
Folks need to stop share home remedies.
Aimless Studios Some do. My pattern, linked to here I believe, came from one who does. It doesn’t matter; they will all be laundered professionally before anyone wears them.
@Aimless Studios that is true. For both hospitals and long term care facilities.
@@Brineytoes how do you know this? Do you work in a hospital? I'm just curious, as the long term facility I work in would not do this.
I don't know if it has been mentioned in the comments yet, but it's worth noting that a "HEPA type" filter has different filtering properties than a "True HEPA" filter. HEPA type filters can be seen advertised as 99% effective against airborne particles, whereas "True HEPA" filters are certified to remove 99.97% of airborne particles. ....So HEPA type filters are effective down to 1.0 microns versus True HEPA filters being effective down to .03 microns. From what I've read the size of the Covid-19 virus ranges from .02-.05 microns.
it is 2020 and who knew nurses had to teach how to sew the masks. please donate masks, hand soaps, toilet papers if you are not using.
@@dwdeive -- YOU SHOULD BE ASHAMED, I HOPE YOU DON'T GET THIS VIRUS.
Chris L I ordered mask from china and take very long to arrive !! I still don’t receive them what a scam!
@@evanm7920 Why should I be ashamed?
@@uchibauki2515 OK, what kind of shipment you use for your ordered masks? I do not know when did you buy it, but for me, the products was shipped to US before 3th, March, and was stored on Amazon warehouse.
Chris L what kind of masks do you have?
Thank you for this video and instructions. Maybe add the RUclips address on the instructional .pdf There are a lot of different video instructions and .pdf patterns coming out. It would help keep them together. You guys did a great job. Thank you again.
Just an added thought...[ and only if you happen to have it] I would sew on a strip of hook & loop (velcro) with the loop or soft side of the velcro would face/touch the face so when the ends are folded over the hooks would hold the elastics on thus avoiding the need for pins. I happen to have bought 5 meters of non-sticking hook & loop off amazon [very cheap and strong] 4 months ago for a different project which is why I thought of this.
Pipe cleaners will rust when laundered , flat aluminum 18g wire is best, elastics for ear bands❣️🌹🙏🏻
If your face masks are made correctly they can be laundered . That is what they are for, and to add extra protection for the correct face masks to extend usability. Research more .❣️
Where do you find flat aluminum wire?
Janet Putnam I went to Home Depot
Sydny Brakke well would you wear it if you had that yuck close to your eyes?
@@sydnybrakke384 I think they will likely last a good while before rusting. They would have to stay wet to start rusting, and I think they would probably be dried right after washing, so they will be quite usable for some time.
This is a wonderful video and a really smart design. Your instructions and demonstration were very clear. The link to the pattern did not work but thanks to other viewers I did get a good link. Already downloaded and printed the pattern document and will start on some. Thank you so much again for doing this!
Like your end results with sealing it thank you that is great infomation
www.craftpassion.com/face-mask-sewing-pattern
I may be missing the point but, besides saving a little bit of fabric, what is the advantage of the short cheek piece and the added complexity? More commonly the cheek piece is cut the same shape and size as the outer piece, the mouth piece is cut and finished as in the video, all 3 pieces are then sewn all the way around. That way you don´t have to worry about the correct overlap of the short cheek and mouth pieces. Less work and you still end up with the same filter pocket, the same access for inserting a nose wire, and the added benefit of 3 layers of fabric in front of the mouth instead of just 2 layers.
Search for "unity point Olson" on Google. The first result is the pattern link.
Looks like it's been scrubbed (pun intended) from their sites.
@@DTyrannosaurus www.unitypoint.org/cedarrapids/filesimages/Coronavirus/Olson%20Mask%20with%20Pattern%20v4.pdf
Tango That one works, thanks!
@@DTyrannosaurus ensure that auto-fit is not selected when printing the pattern to ensure pattern measurements are not altered...this is at the bottom of the pattern I almost missed it...
The link is not available.
I was curious and did a bit of research on the HEPA vacuum bags that was used for the filter material, and was unpleasantly surprised to find that some have a non-stick coating, which means perfluorinated alkyl hydrocarbons (PFAs for short). PFAs are non-biodegradeable, bioaccumulative, and are linked to numerous health problems in humans. Most vacuum bag manufacturers don't say whether or not they have a non-stick coating, but I noticed several HEPA air filter brands (i.e. the filters that go in the stand-alone air purifying machines) that mention having a non-stick coating. As a chemist, I would be seriously wary of having to breathe through a fibrous, non-woven textile coated in PFAs, especially something that was never meant for PPE/medical use. To be on the safe side, I would avoid using them.
Louise Hidinger , thank you for this heads up about vacuum filters! I’m also concerned about people using fusible interfacing - seems it would have harsh chemicals.
Louise Hidinger m
Use parchment paper from the one Dollar Store.
@@rpwoodard Interfacing is a sheet of non-woven polyester fibres (i.e. matted together), so it's relatively non-toxic. It's possible to buy interfacing without the fusible (which is a glue coating). I'd use plain interfacing, not fusible.
@@LG-universe Parchment is relatively non-porous and would probably be difficult to breathe through. You'd probably have better luck using 2-3 sheets of coffee filter paper.
I bought some 0.35 micron water filters to use. Each filter yields 6 square feet & very cost effective at under $10.
Just saw another video saying they don't actually recommend the HEPA filters because of inhalation of fine glass particles or something like that?I had watched another doctor's video that recommended them, and then another doctor recommended against them. So confusing but it is a time of trial and error unfortunately.
Trial and error with fiberglass is not something I would be playing with. Even 3M who makes HEPA filters says not to use them with facemasks.
www.vacuumcleanermarket.com/news/do-vacuum-bags-contain-fiberglass/
You didn’t show the pattern. Hard to see what he was doing.
Link in the Description (have to click "show more")
"Updated" link did not work for me 4/4, but the "pattern only" link did
there is a short video (and perhaps more basic mask) but it shows a pattern and dimensions. hope that helps. ruclips.net/video/yzuTvHJxOSs/видео.html
I've been making the pleated kind and using fabric ties (as I don't have any elastic) and putting two pipe cleaners bent in half and twisted to make them stronger in the nose section. I wash them in a mesh bag in my washing machine and dry them in the dryer. So far, they are holding up well. If you really want to make sure they are sanitized, you can iron them on the cotton setting and use lots of steam, then turn off the steam an iron them some more to make sure they are dry. I've been using heavy quilters cotton and flannel. Any holes made by pins or the needles go away when you wash them. I tried two layers of flannel, but it was really hot down here in South Carolina. My husband used to be a nurse and he really likes them. He was fascinated watching this video, as was I. Unfortunately, since we started wearing our masks, we've noticed that some people seem to think the distancing is no longer necessary. I've had people nearly run over me in the grocery store, so I just move over, hold my breath for a while and let them by. I am ashamed that we are having to do this in our nation. How can we be so unprepared when we have known for at least 18 years that this could happen?
One thing I would like to point out, is that the polka dot fabric used on this mask, should be a fabric that is water repellent, waterproof or water resistant (think of fabrics used on raincoats).
As any external liquid or cough coming from an individual, will not go through the fabric weave . If you're going to use regular fabric, regardless of how tight the weave is, it will not suffice for it's intended function.
Also I would like to add, on the center seam of this mask, are holes created from the stitch, you should put a separate piece of backing (attach it to the facing side) to block those holes, set that piece of fabric between the self and facing.
Armando Enriquez I’m not so sure about that. Those fabrics are not breathable at all. I’ve experimented with a few different waterproof fabrics and haven’t found one that will work in a mask.
Not only you would you not get enough air through it that way. The virus it self would still get through. It's the reason the N95 mask still can't stop the virus. The purpose of the mask in this case is to try and reduce the transmision of droplets. If the virus comes in contact with the mask it will still get through. This is why nurses, and doctors are still grtting sick. The mask becomes a virus vector it's self. Which is why it is important to change masks regularly. Not reuse the same mask the entire shift. Remember, if the type of mask like a N95 could reject the virus. It would be so restrictive that air would blow out the side on exhale. The only real way to protect healthcare staff is the use of a respirator that completely seals on the face. Just like a gas mask. Again the filter media would be very restrictive. This makes the very act of breathing difficult, and exhuasting. The focus on providing N95 masks is similar to pyscology of providing none bullet proof hellmets to soliders. While those hellments are intended to protect against shrapnel, they often make soilders feel "bullet proof" Well at first. Once they experience seeing them fail for others that feeling of protection goes away. With a hidden enemy our healthcare workers still feel protected by the N95. They don't see thier fellow works get infected. Yes even highly educated people can be prone to thinking with thier emotions. Think about it. The CDC & WHO tells us that these N95 masks are useless for protecting us against the virus. So we shouldn't hord them, because the nurses and doctors need them to protect them against the virus. You can't have it both ways. If it protects the nurses & doctors, then it will protect us as well. If it wont protect us, the common folk, then it wont protect nurses and doctors. We are not biologicly different. One group are not supper humans that have a special power to gain protection from N95 masks. They want the nurses and doctors to have so they "feel protected" and continue to show up everyday inspite of having no protection against the virus. This is why they suddenly approved the use of none standard masks. A mask, any mask, provides the same false sense of security against the virus. They would approve the use of a lace mask if it provided the same false sense of security, and kept them showing up everyday inspite of the risk. So done your hellmets, back to the front! To paraphase Metalica's song Back to the Front.
I wish I could sew like that. I'm going to take out my machine later this morning...and rev that baby up!
HEPA filter bags contain micron glass particles. When cut it allows those particles to enter the lungs and potential long term lung issues. Be sure to research any filter fabrics ,materials and textiles before using to breath through. It's best to use a material that is meant for the purpose of breathing, not just air filtration. Amazon currently had np2.5 replacement filters.
Be safe people💖
The HEPA filters are made of borosilicate glass fibers or plastic fibers (e.g., polypropylene) bound together with up to 5% acrylic binder (the same compound that binds latex paint to a house).
I wish this video were just a straightforward demonstration with measurements and a link to the pattern. There is too much extra talk and not enough clear instruction.
They have a printable pattern in the description
David yes, but they also said they wanted a link to the pattern and I was letting them know where that was. You know what’s included with the pattern? 3 pages of clear instructions telling you how to assemble it. This video was meant as a companion to those instructions.
Search Mimi G Style Mask. Printable pattern with very easy instructions.
I know im just a member of the "public" but im a seamstress - maybe y'all shoulda consulted a seamstress on this one. So many unnecessary steps and still have precisely what you need.
This is the ‘Olson Mask’ .....you can find many, many, many tutorials on You Tube. This isn’t something these two invented, it’s just the one they liked the best
55 years experience sewing. Working with neighbor who has a phd in biplogyg to come up with a design that can be used anywhere in the hospital. Making prototypes for the hospitals in our region. Will post a video once completed. Our masks will be tested using 3M testing device before and after washing. Recomendations: Clip and press all corners and seams so they lay flat and top stitch. Hemming edges are not necessary and create bulk. instead pink, or use Fray Check, or Fray Lock E6000. Masks can be disinfedted by handwashing in a bleach water solution of 1/2 cup bleach to 1 gallon 160 degree water, for 5 min. rince, and air dry. Prints will fade slightly, but mask will remain fully entact. Filters can also be cleaned the same way but do not squeeze when washing, ok to lightly scrub with soft brush after 5 min. of soaking. If you do not machine wash edges will remain entacted. The less bulk the better. Top stitch perimiter of finished mask 1/8 th inch. You can get by using one thickness to fold over to secure elastic. You can use bare sheet copper or aluminum sheeting, adhere to outside of front panel with double stick tape, hot melt glue, zigzag, or by hand. pipe cleaners are too flimsy and will rust when washed. You can also sew in a pocket to hold nose bridge metal, making it removeable.
Probably good advice for the outer fabric covers, but according to tests run by smartairfilters.com, washing or disinfecting non-woven filter masks (N95 material) reduces filtration effectiveness by 20 to 30%. Presently, they recommend air drying for 48-72 hours instead.
smartairfilters.com/en/blog/disinfect-clean-n95-mask-virus-coronavirus/
D'arcy Sounds like you have a plan more thoughtful and well reasoned than most. Exciting!
Love that you're going to prototype and will test with 3M device pre and post washing .
Will you answer a few questions?
1) what's the fiber content, textile structure and weight of the fabrics you're using -- i.e. the textile technical specs.
2)What is the 3M testing device and is it available to the consumer market?
3) Are you planning tests after each of multiple washings? (to determine specs re: number of times the item can be washed before its effective integrity is no longer extant)
4) As to the copper/aluminum sheeting: Is this included to allow the mask to be shaped and fitted to the user's face for an effective seal? Can't visualize where you're putting it - will wait for the video.
5) As to material for the filter: what brand, what are its specs, have you sourced it? Do you avoid squeezing when washing because doing so will damage the filter's material structure and thus compromise the it's effectiveness?
Hope you have time to answer.
Admire your approach and plan!
Thanks
Stay well, stay safe, keep calm and carry on.
I just finished cutting out 52 complete masks. Rotary cutters are the way to go. Could cut 8 layers of fabric at a time.
Hi, where or how did you get all the measures for the pieces?
@@marzysiedlecka1395 mail.google.com/mail/u/0/?shva=1#inbox/FMfcgxwHMZTKmVsrwCrSCbBHMkpnCtdM?projector=1&messagePartId=0.1
@@diannaf4821 Thank you
Thank you. Next time, keep the camera on what is being sewn so it’s easier to see what pieces go together please!