I just got my saber today and this app is really helpful. I did see quite a few negative reviews, but it works amazingly with my saber, thank you for sharing this information!
Thanks ! The old version of ForcePark asked a bleutooth password, but this QR code works to install the v.2 of the app. It was very easy to connect then
Thanks! The SNV4 Pro. I haven't been able to use it on the original SNV4. If you figure out a way let me know! However I have seen videos in the past of the old version of the app working with the SNV4 so I would assume it still works.
The SNv4 Pro is a new board and is meant to be very similar to Proffie boards in terms of customization. The Forcepark V2 app only works with this new board, while SNv4 (not pro) works with the older app.
@@MadeInDetroit63 I’ve only had one Xeno saber and I didn’t enjoy it as much as the SNV4. I don’t think it was the 3.0 though. But it wasn’t as responsive as the SNV4 in my opinion. The newer Xeno model may be better however.
I got a darth maul lightsaber from artsabers that works normal except for the motion controls, the on and off twist is the main issue, it hardly works and takes multiple twists. Would you know why?
Hello, is there a wat yo setup colors with sd card ? I want to setup custom RGB colors but I can't do it with the color wheel, any way to do that with a pc ?
I know different fonts you can purchase will have custom colors. I’m not sure how to create those yourself. This article has some useful info on it. Hope it helps! nsabers.com/pages/snv4-pro-app-operation-guide
I just got this new SNV4 Pro board in my 2 button Ventress hilt and can’t seem to get the FOC to work properly (hit or miss at best) and the twist on and off and push/pull on and off doesn’t work at all and I even tried all of the different ForcePark V2 settings with no luck, any tips or suggestions?
Thanks! I’m not too sure. If that’s not working maybe make sure that you didn’t unselect any fonts. I would also try and see if anything changes from powering it completely off (triple tap the aux I believe, then turn it back on and see if there’s a change.
@@Fender131 so sorry to hear that. If I find an answer I’ll reach back out to you. In the meantime I would try contacting the saber company and let them know what’s going on.
Get your SNV4 Pro lightsabers here and save 5% with code FALCON www.artsabers.com/?ref=SB3XcfUE_3QrhW
I just got my saber today and this app is really helpful. I did see quite a few negative reviews, but it works amazingly with my saber, thank you for sharing this information!
@@YuseiFudo_1774 So glad it’s working great for you! I’m happy you found the info helpful. Enjoy your new saber!
Thanks ! The old version of ForcePark asked a bleutooth password, but this QR code works to install the v.2 of the app. It was very easy to connect then
Simon immediately downloaded this app to try with our saber and it worked!! 😍
Woo! It’s such a great app.
Great demo! So this all works with current SNv4? Or is it a new board? I haven’t been able to do more than simply pair the app with my SNv4.
Thanks! The SNV4 Pro. I haven't been able to use it on the original SNV4. If you figure out a way let me know! However I have seen videos in the past of the old version of the app working with the SNV4 so I would assume it still works.
Simon ended up downloading the version1 of the app because the version2 didn’t work with our saber (something about location services not working).
@@nerdydaydreams That's good to know. Version 2 wouldn't more with my non SNV4 pro saber so maybe I need version 1 for that.
The SNv4 Pro is a new board and is meant to be very similar to Proffie boards in terms of customization. The Forcepark V2 app only works with this new board, while SNv4 (not pro) works with the older app.
But this is so cool and thank you for the tutorial ! This is so helpful
Glad it was helpful!
There is a session error thing for my and public blade effects, what does this mean?
I’m not sure.
This is actually really unique.
It’s a really awesome app!
Hello there. What are your thoughts about the Xeno 3.0 compared to the SNV4 Pro? 🍻 and MTFBWY
@@MadeInDetroit63 I’ve only had one Xeno saber and I didn’t enjoy it as much as the SNV4. I don’t think it was the 3.0 though. But it wasn’t as responsive as the SNV4 in my opinion. The newer Xeno model may be better however.
great video! thank you!
Hey, thanks! So glad you enjoyed it.
I got a darth maul lightsaber from artsabers that works normal except for the motion controls, the on and off twist is the main issue, it hardly works and takes multiple twists. Would you know why?
What is the core? Xeno, Sn-V4 Pro or Proffie?
@@FalconSquadronsn-v4
@@AlexisCote-i4q is it the new pro by chance?
@@FalconSquadron it works on the app if that helps at all 😂 I’m not sure if it’s the pro or not but I believe it the regular
@@AlexisCote-i4q in the app can you change the sensitivity for the gesture controls? Try making it more sensitive and see if that helps.
Hello, is there a wat yo setup colors with sd card ? I want to setup custom RGB colors but I can't do it with the color wheel, any way to do that with a pc ?
I know different fonts you can purchase will have custom colors. I’m not sure how to create those yourself. This article has some useful info on it. Hope it helps! nsabers.com/pages/snv4-pro-app-operation-guide
I just got this new SNV4 Pro board in my 2 button Ventress hilt and can’t seem to get the FOC to work properly (hit or miss at best) and the twist on and off and push/pull on and off doesn’t work at all and I even tried all of the different ForcePark V2 settings with no luck, any tips or suggestions?
I’m sorry to hear that. Did you try restring to factory settings in the app?
@@FalconSquadron yes, I did.
@@FalconSquadron Good Morning! Do you happen to have the new SNV4 Pro firmware available for download? Thanks, John
@@MadeInDetroit63 I do not.
Hi great video! I messed up all the colors and fonts on mine. The restore factory settings button does nothing. Any suggestions?
Thanks! I’m not too sure. If that’s not working maybe make sure that you didn’t unselect any fonts. I would also try and see if anything changes from powering it completely off (triple tap the aux I believe, then turn it back on and see if there’s a change.
@@FalconSquadron yea no luck. I even removed the battery.
@@Fender131 so sorry to hear that. If I find an answer I’ll reach back out to you. In the meantime I would try contacting the saber company and let them know what’s going on.
@@FalconSquadron thank you !
Can you create a ignition and shut down too or you only use the one include
You can upload sound fonts or use ones created by others in the app.
Does it work with xeno v3 lightsabers ??
@@DanielCruz-t2t They have their own Xeno app.
Does this use the same drop in core function as base SNV4? Can i drop it in to a saber already set up with an SNV4 core?
Yes, that should work. From my understanding that is how they are being set up with the currently released sabers.
@@FalconSquadron cool thanks!
@@jedisalamander2457 Anytime!
Do you have the link to the new app for android?
play.google.com/store/apps/details?id=com.ztcx.sabert&hl=en_US&gl=US&pli=1
This link takes me to the original Force Park app that I use for my SNV4 non pro sabers. I can not find the ForceParkv2 app anywhere.
So i have a snv4 pro and my phone is asking me for a Bluetooth password.. Does anyone know the Bluetooth passcode ?
I haven't heard of that happening. I'm sorry I don't have an answer.
@@FalconSquadron that's okay. I know it's weird and I've been sick trying to figure it out
@@FalconSquadron I finally got it to work!! I had to use my location and my Bluetooth had to be on 😅
@@johnchenoweth278 So glad you got it!
@@FalconSquadron Thank you
Garcia Scott Williams Charles Martin Jose
Williams Richard Williams Patricia Martinez Richard